• Program

  •  Download the General Program in pdf version
  • LEgend
    •  Award
    •  Break
    •  Clinical Sessions
    •  Opening & Plenary Lecture
    •  Parallel Sessions
    •  Poster Sessions
    •   Technological Sessions
    •  Transational Sessions
    •  Young Scientist Forum (YSF)
    • Posters
    • Topic
    • Speaker
  • Organizer
    ESB
    BIOMAT
  • 14:05 | - Tips for successful science communicationPART IElodie CHABROL, Freelance science communicator and director of Pint of science international & France

    person_pinElodie CHABROL, Freelance science communicator and director of Pint of science international & France
    14:50 | - Wonder & synergies at the service of knowledgePART IRenaud POURPRE , Freelance science communicator / facilitator

    person_pinRenaud POURPRE , Freelance science communicator / facilitator , France
    15:35 | - From lab to market: a giant leapPART IPaul DELTROT, Readily3D SA, EPFL Innovation Park, Lausanne, Switzerland

    person_pinPaul DELTROT, Readily3D SA, EPFL Innovation Park, Lausanne, Switzerland
    10:30 | KL Scaffold - 3D sensing scaffold for extracellular pH mapping at single cell level in tumor modelsPSOP-01Valentina ONESTO, Institute of Nanotechnology, National Research Council (CNR-Nanotec), Italy

    person_pinValentina ONESTO, Institute of Nanotechnology, National Research Council (CNR-Nanotec), Italy
    11:00 | O1 Scaffold - Cell-Derived Extracellular Matrices for Establishment of 3D in vitro Tumor Models for Cancer ResearchPSOP-01Gülsün BAGCI, 1Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology, Barcelona, Spain. 2 CIBER en Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, Madrid, Spain.
    Elisabeth ENGEL , 1Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology, Barcelona, Spain. 2 CIBER en Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, Madrid, Spain. 3 IMEM-BRT, Ciència i Enginyeria de Materials, Polytechnical University of Catalonia (UPC), Barcelona, Spain.
    Barbara BLANCO-FERNANDEZ , 1Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology, Barcelona, Spain. 2 CIBER en Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, Madrid, Spain.

    person_pinGülsün BAGCI, 1Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology, Barcelona, Spain. 2 CIBER en Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, Madrid, Spain.
    11:15 | O2 Scaffold - Composite Scaffolds Enriched with Nano-hydroxyapatite and Strontium-nano-hydroxyapatite Promote Osteogenic DifferentiationPSOP-01Georgia-Ioanna KONTOGIANNI, University of Crete
    Amedeo Franco BONATTI, University of Pisa
    Carmelo DE MARIA, University of Pisa
    Raasti NASEEM, Newcastle University
    Catarina COELHO, FLUIDINOVA, S.A
    Giovanni VOZZI, University of Pisa
    Kenneth DALGARNO, Newcastle University
    Paulo QUADROS, FLUIDINOVA, S.A
    Chiara VITALE-BROVARONE, Politecnico di Torino
    Maria CHATZINIKOLAIDOU, Foundation for Research and Technology Hellas and University of Crete, Heraklion, Greece

    person_pinMaria CHATZINIKOLAIDOU, Foundation for Research and Technology Hellas and University of Crete, Heraklion, Greece
    11:30 | O3 Scaffold - Engineered Porous Microshuttles for Drug, Nanomaterials and Cell DeliveryPSOP-01K. SONG, Department of Instructive Biomaterials Engineering, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Universiteitssingel 40, 6229 ER Maastricht, The Netherlands
    Zeinab TAHMASEBI BIRGANI, 0616193079
    Pamela HABIBOVIC, 83155
    Roman TRUCKENMÜLLER, 0614340516

    person_pinK. SONG, Department of Instructive Biomaterials Engineering, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Universiteitssingel 40, 6229 ER Maastricht, The Netherlands
    11:45 | O4 Scaffold - Nanoneedles for Targeted siRNA Transfection of the Human Corneal EndotheliumPSOP-01Eleonora MAURIZI, Dentistry center, Università di Parma, Parma, Italy, Centre for Regenerative Medicine, University of Modena and Reggio Emilia, Modena, Italy
    Davide MARTELLA, Centre for Craniofacial and Regenerative Biology, King’s College London, London, United Kingdom
    Davide SCHIROLI, Transfusion Medicine Unit, Azienda USL-IRCCS, Reggio Emilia
    Alessia MERRA, Holostem Terapie Avanzate S.r.l.
    Graziella PELLEGRINI, Centre for Regenerative Medicine, University of Modena and Reggio Emilia, Modena, Italy; Holostem Terapie Avanzate S.r.l., Modena
    Claudio MACALUSO, Dentistry center, Università di Parma, Parma, Italy
    Ciro CHIAPPINI, Centre for Craniofacial and Regenerative Biology, King’s College London, London, United Kingdom; London Centre for Nanotechnology, King’s College London, London, United Kingdom

    person_pinCiro CHIAPPINI, Centre for Craniofacial and Regenerative Biology, King’s College London, London, United Kingdom; London Centre for Nanotechnology, King’s College London, London, United Kingdom
    12:00 | FP01 Scaffold - Fabrication of 6-BromoIndirubin-3’-Oxime Incorporated Guanosine Diphosphate Crosslinked Chitosan Scaffolds to Promote Osteogenic Differentiation in Myoblastic C2C12 CellsPSOP-01Celine J. AGNES, Department of Biomedical Engineering, McGill University, Montreal, Quebec, Canada
    Adrien TAKADA, Institute of Parasitology, McGill University, Montreal, Quebec, Canada
    Monzur MURSHED, Faculty of Dentistry, McGill University, Montreal, Quebec, Canada, Shriner’s Hospital for Children, Montreal, Quebec, Canada
    Bettina M. WILLIE, Department of Biomedical Engineering, McGill University, Montreal, Quebec, Canada, Shriner’s Hospital for Children, Montreal, Quebec, Canada, Department of Pediatric Surgery, McGill University, Montreal, Quebec, Canada
    Maryam TABRIZIAN, Department of Biomedical Engineering, McGill University, Montreal, Quebec, Canada, Faculty of Dentistry, McGill University, Montreal, Quebec, Canada

    person_pinCeline J. AGNES, Department of Biomedical Engineering, McGill University, Montreal, Quebec, Canada
    12:05 | FP02 Scaffold - Hybrid Core-Shell Scaffolds for Bone Regeneration and a 3D Printing Approach to Tune their PropertiesPSOP-01Chiara PASINI, Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy
    Luciana SARTORE, Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy
    Stefano PANDINI, Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy
    Giorgio RAMORINO, Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy

    person_pinChiara PASINI, Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy
    12:10 | FP03 Scaffold - Deposition of a polymer-based honeycomb-like membrane on 3D printed bioactive glass scaffold and decellularized bone matrix as scaffolds for bone tissue engineeringPSOP-01Audrey DERAINE COQUEN, Laboratoire ERRMECe, CY Cergy Paris Université, Neuville sur Oise, France
    Emmanuel PAUTHE, Laboratoire ERRMECe, CY Cergy Paris Université
    Minna KELLOMAKI, BioMediTech institute, Medicine and Health Technology Faculty, Tampere University
    Michel BOISSIERE, Laboratoire ERRMECe, CY Cergy Paris Université
    Jonathan MASSERA, BioMediTech institute, Medicine and Health Technology Faculty, Tampere University

    person_pinMichel BOISSIERE, Laboratoire ERRMECe, CY Cergy Paris Université
    10:30 | KL1 Wound healing - Dense Collagen/PLGA Composite Hydrogels Generated by In Situ Nanoprecipitation as Novel Medicated Wound Dressings: In Vitro and In Vivo Evaluation.PSOP-02Xiaolin WANG, Sorbonne University - LCMCP
    Olivier RONSIN , Sorbonne University - INSP
    Nicolette FARMAN, INSERM - Centre de Recherche des Cordeliers - Sorbonne Université -Université de Paris
    Tristan BAUMBERGER , Sorbonne University - INSP
    Frédéric JAISSER , INSERM - Centre de Recherche des Cordeliers - Sorbonne Université -Université de Paris
    Thibaud CORADIN, Sorbonne University - LCMCP
    Christophe HÉLARY, Sorbonne University, CNRS, UMR 7574 – Chemistry of Condensed Matter Laboratory - F-75005 Paris, France

    person_pinChristophe HÉLARY, Sorbonne University, CNRS, UMR 7574 – Chemistry of Condensed Matter Laboratory - F-75005 Paris, France
    11:00 | KL2 Wound healing - The comparability of in vitro and in vivo experiments for degradable Mg-implants: basis for a digital twin of implant degradationPSOP-02Regine WILLUMEIT-RÖMER, Institute for Metallic Biomaterials, Helmholtz-Zentrum Hereon, Max-Planck-Str. 1, 21502 Geesthacht, Germany
    Stefan BRUNS, Helmholtz Zentrum Hereon
    Heike HELMHOLZ, Helmholtz Zentrum Hereon
    Norbert HORT, Helmholtz Zentrum Hereon
    Diana KRÜGER, Helmholtz Zentrum Hereon
    Björn WIESE, Helmholtz Zentrum Hereon
    Silvia GALLI, Helmholtz Zentrum Hereon
    Julian MOOSMANN, Helmholtz Zentrum Hereon
    Christian CYRON, Helmholtz Zentrum Hereon
    Berit ZELLER-PLUMHOFF, Helmholtz Zentrum Hereon

    person_pinRegine WILLUMEIT-RÖMER, Institute for Metallic Biomaterials, Helmholtz-Zentrum Hereon, Max-Planck-Str. 1, 21502 Geesthacht, Germany
    11:30 | O1 Wound healing - Wound Dressings Based on Gellan Gum, Alginate and Lipid Nanoparticles Loaded with Antibacterial Peptide NisinPSOP-02Katarzyna RECZYNSKA-KOLMAN, AGH University of Science and Technology
    Kinga HARTMAN, AGH University of Science and Technology
    Konrad KWIECIEN, AGH University of Science and Technology
    Monika BRZYCHCZY-WLOCH, Jagiellonian University, Medical College
    Elzbieta PAMULA, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

    person_pinElzbieta PAMULA, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland
    11:45 | O2 Wound healing - Augmented siloxane-based rapid action foams for hemostatic treatmentPSOP-02Pritha SARKAR, Department of Materials Science and Engineering, University of Central Florida, United States
    Kausik MUKHOPADHYAY, University of Central Florida

    person_pinPritha SARKAR, Department of Materials Science and Engineering, University of Central Florida, United States
    12:00 | O3 Wound healing - Effect of local administration zoledronic acid and PRP with bone allograft on bone defect healingPSOP-02Elyarbek TASHMETOV, Surgical diseases department, Karaganda medical university, Karaganda, Kazakhstan
    Dina SAGINOVA, Karaganda Medical University
    Berik TULEUBAEV, Karaganda Medical University
    Amina KOSHANOVA, Karaganda Medical University

    person_pinElyarbek TASHMETOV, Surgical diseases department, Karaganda medical university, Karaganda, Kazakhstan
    12:15 | FP01 Wound healing - Three Fungal Exopolysaccharides as New Biomaterials for Wound HealingPSOP-02Masoud HAMIDI, Université libre de Bruxelles (ULB), École polytechnique de Bruxelles – 3BIO-BioMatter, Avenue F.D. Roosevelt, 50 - CP 165/61, 1050 Brussels, Belgium
    Oseweuba Valentine OKORO, Université libre de Bruxelles (ULB), École polytechnique de Bruxelles – 3BIO-BioMatter, Avenue F.D. Roosevelt, 50 - CP 165/61, 1050 Brussels, Belgium
    Giuseppe IANIRI, Dipartimento Agricoltura, Ambiente e Alimenti, Università degli Studi del Molise, Campobasso, Italy
    Hafez JAFARI, Université libre de Bruxelles (ULB), École polytechnique de Bruxelles – 3BIO-BioMatter, Avenue F.D. Roosevelt, 50 - CP 165/61, 1050 Brussels, Belgium
    Khodabakhsh RASHIDI, Research Center of Oils and Fats, Research Institute for Health Technology, Kermanshah University of Medical Sciences, Kermanshah, Iran
    Saeed GHASEMI, Department of Medicinal Chemistry, School of Pharmacy, Guilan University of Medical Sciences, Rasht, Iran
    Raffaello CASTORIA, Dipartimento Agricoltura, Ambiente e Alimenti, Università degli Studi del Molise, Campobasso, Italy
    Davide PALMIERI, Dipartimento Agricoltura, Ambiente e Alimenti, Università degli Studi del Molise, Campobasso, Italy
    Cédric DELATTRE, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, Institut Pascal, F-63000 Clermont-Ferrand, France
    Guillaume PIERRE, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, Institut Pascal, F-63000 Clermont-Ferrand, France
    Mahta MIRZAEI, Université libre de Bruxelles (ULB), École polytechnique de Bruxelles – 3BIO-BioMatter, Avenue F.D. Roosevelt, 50 - CP 165/61, 1050 Brussels, Belgium
    Hadi SAMADIAN, Department of Molecular Medicine, School of Medicine, Hamadan University of Medical Sciences, Hamadan, Iran
    Amin SHAVANDI, Université libre de Bruxelles (ULB), École polytechnique de Bruxelles – 3BIO-BioMatter, Avenue F.D. Roosevelt, 50 - CP 165/61, 1050 Brussels, Belgium

    person_pinMasoud HAMIDI, Université libre de Bruxelles (ULB), École polytechnique de Bruxelles – 3BIO-BioMatter, Avenue F.D. Roosevelt, 50 - CP 165/61, 1050 Brussels, Belgium
    12:20 | FP02 Wound healing - Multifunctional hydrogel-based patch for targeting inflammation and regeneration in chronic intestinal woundsPSOP-02Marco ARAÚJO, i3S - Instituto de Investigação e Inovação em Saúde, University of Porto, Porto, Portugal
    João SILVEIRA, i3S - Instituto de Investigação e Inovação em Saúde; FEUP – Faculdade de Engenharia da Universidade do Porto
    Aureliana SOUSA, i3S - Instituto de Investigação e Inovação em Saúde
    Mafalda BESSA-GONÇALVES, i3S - Instituto de Investigação e Inovação em Saúde
    Susana SANTOS, i3S - Instituto de Investigação e Inovação em Saúde; ICBAS - Instituto de Ciências Biomédicas Abel Salazar
    Cristina BARRIAS, i3S - Instituto de Investigação e Inovação em Saúde; ICBAS - Instituto de Ciências Biomédicas Abel Salazar

    person_pinMarco ARAÚJO, i3S - Instituto de Investigação e Inovação em Saúde, University of Porto, Porto, Portugal
    12:25 | FP03 Wound healing - Development of Intelligent Hydrogel-Based Burn Wound DressingsPSOP-02Manon MINSART, Polymer Chemistry & Biomaterials Research Group, CMaC, Ghent University, Ghent, Belgium
    Nicolas DEROOSE, Polymer Chemistry & Biomaterials Research Group, CMaC, Ghent University
    Laurens PARMENTIER, Polymer Chemistry & Biomaterials Research Group, CMaC, Ghent University
    Sandra VAN VLIERBERGHE, Polymer Chemistry & Biomaterials Research Group, CMaC, Ghent University
    Arn MIGNON, Biomaterials and Tissue Engineering, Department of Materials Engineering, KU Leuven
    Peter DUBRUEL, Polymer Chemistry & Biomaterials Research Group, CMaC, Ghent University

    person_pinManon MINSART, Polymer Chemistry & Biomaterials Research Group, CMaC, Ghent University, Ghent, Belgium
    10:30 | KL1 Bioinks - 3D Bioprinting: in vitro model, implantable bioink and intraoperative methodsSYMP-01Christophe MARQUETTE, 3d.FAB, Univ Lyon, Université Lyon1, CNRS, INSA, CPE-Lyon, ICBMS, UMR 5246

    person_pinChristophe MARQUETTE, 3d.FAB, Univ Lyon, Université Lyon1, CNRS, INSA, CPE-Lyon, ICBMS, UMR 5246, Villeurbanne , France
    11:00 | KL2 Bioinks - Extending the capabilities of bioprinting with the Dynamic Formulation Module (multi-material patterning, mixing and core-shell) in a single dispensing processSYMP-01Mauro PETRETTA, REGENHU SA

    person_pinMauro PETRETTA, REGENHU SA, Villaz-St-Pierre, Switzerland
    11:30 | O1 Bioinks - Novel Approach for Guiding Stem Cell Organization and Tissue Growth by Multi-head 3D Bioprinting to Mimic Human Corneal StromaSYMP-01Paula PUISTOLA, Eye Group, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    Anni MÖRÖ, Eye Group, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    Susanna MIETTINEN, Adult Stem Cell Group, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    Heli SKOTTMAN, Eye Group, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland

    person_pinPaula PUISTOLA, Eye Group, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    11:45 | O2 Bioinks - Development of a novel hybrid bioink containing living microfactoriesSYMP-01Maryam GHASEMZADEH-HASANKOLAEI, CICECO–Aveiro Institute of Materials, Department of Chemistry, University of Aveiro, 3810-193 Aveiro, Portugal
    João F. MANO, CICECO–Aveiro Institute of Materials, Department of Chemistry, University of Aveiro, 3810-193 Aveiro, Portugal

    person_pinMaryam GHASEMZADEH-HASANKOLAEI, CICECO–Aveiro Institute of Materials, Department of Chemistry, University of Aveiro, 3810-193 Aveiro, Portugal
    12:00 | O3 Bioinks - Clickable Dynamic BioinksSYMP-01Pierre TOURNIER, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Nathan LAGNEAU, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Boris HALGAND, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    François LOLL, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Jérôme GUICHEUX, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Catherine LE VISAGE, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Vianney DELPLACE, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France

    person_pinVianney DELPLACE, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    12:15 | FP01 Bioinks - A Collagen-Glycosaminoglycan Scaffold Coating Enhances the Bio-Lubrication of a 3D-Printed Framework for Cartilage repairSYMP-01Austyn MATHESON, Tissue Engineering Research Group, Dept. of Anat.& R.M., Royal College of Surgeons in Ireland, Dublin, Ireland; Trinity Centre for Biomedical Engineering, Trinity College Dublin, Ireland Advanced Materials & Bioengineering Research Centre, RCSI and TCD, Dublin, Ireland Biomedical Engineering, School of Dental Medicine, UConn Health, USA
    Mark LEMOINE, The Royal College of Surgeons in Ireland
    Eamon SHEEHY, The Royal College of Surgeons in Ireland
    Tannin SCHMIDT, University of Connecticut, Health Campus
    Fergal O'BRIEN, The Royal College of Surgeons in Ireland

    person_pinAustyn MATHESON, Tissue Engineering Research Group, Dept. of Anat.& R.M., Royal College of Surgeons in Ireland, Dublin, Ireland; Trinity Centre for Biomedical Engineering, Trinity College Dublin, Ireland Advanced Materials & Bioengineering Research Centre, RCSI and TCD, Dublin, Ireland Biomedical Engineering, School of Dental Medicine, UConn Health, USA
    12:20 | FP02 Bioinks - Micellar nitric oxide-releasing hydrogels for DLP-based 3D printingSYMP-01Marcelo GANZAROLLI DE OLIVEIRA, Institute of Chemistry, University of Campinas, UNICAMP, Campinas, SP, Brazil
    Mateus PERES BOMEDIANO, Institute of Chemistry, University of Campinas, UNICAMP, Campinas, SP, Brazil
    Murilo IZIDORO SANTOS, Institute of Chemistry, University of Campinas, UNICAMP, Campinas, SP, Brazil
    Giovanna J.V.P. DOS SANTOS, Institute of Chemistry, University of Campinas, UNICAMP, Campinas, SP, Brazil
    Laura CAETANO ESCOBAR DA SILVA, Institute of Chemistry, University of Campinas, UNICAMP, Campinas, SP, Brazil

    person_pinMarcelo GANZAROLLI DE OLIVEIRA, Institute of Chemistry, University of Campinas, UNICAMP, Campinas, SP, Brazil
    10:30 | KL Antioxidant - Nanozymes in Biomedicine: Route towards Clinical ApplicationsSYMP-02Matteo BATTAGLINI, Fondazione Istituto Italiano di Tecnologia
    Alessio CARMIGNANI, Fondazione Istituto Italiano di Tecnologia
    Giada GENCHI, Fondazione Istituto Italiano di Tecnologia
    Gianni CIOFANI, Smart Bio-Interfaces, Istituto Italiano di Tecnologia, Pontedera (Pisa), Italy

    person_pinGianni CIOFANI, Smart Bio-Interfaces, Istituto Italiano di Tecnologia, Pontedera (Pisa), Italy
    11:00 | O1 Antioxidant - Bionic tissue with antioxidant microreactors reduce oxidative stress on HepG2 cellsSYMP-02Stefan PENDLMAYR, (1) Interdisciplinary Nanoscience Center (iNANO), Aarhus University, Aarhus, Denmark. (2) Sino-Danish Center for Education and Research, University of Chinese Academy of Sciences, Beijing, China
    Noga GAL, Interdisciplinary Nanoscience Center (iNANO), Aarhus University, Aarhus, Denmark.
    Xiaomin QIAN, Interdisciplinary Nanoscience Center (iNANO), Aarhus University, Aarhus, Denmark.
    Brigitte STÄDLER, Interdisciplinary Nanoscience Center (iNANO), Aarhus University, Aarhus, Denmark.

    person_pinStefan PENDLMAYR, (1) Interdisciplinary Nanoscience Center (iNANO), Aarhus University, Aarhus, Denmark. (2) Sino-Danish Center for Education and Research, University of Chinese Academy of Sciences, Beijing, China
    11:15 | O2 Antioxidant - Engineering Biomimetic Epigenetically-Activated Extracellular Vesicles to Promote Bone FormationSYMP-02Kenny MAN, School of Chemical Engineering, University of Birmingham, Birmingham, UK

    person_pinKenny MAN, School of Chemical Engineering, University of Birmingham, Birmingham, UK
    11:30 | O3 Antioxidant - Establishment of Selenium-incorporated Mesoporous Silica Nanoparticles (MSNs) for Osteosarcoma TherapySYMP-02Lei HE, Department of Instructive Biomaterials Engineering (IBE), MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, the Netherlands

    person_pinLei HE, Department of Instructive Biomaterials Engineering (IBE), MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, the Netherlands
    11:45 | O4 Antioxidant - ALTERNATIVE Horizon 2020 project for building an innovative platform to assess the cardiotoxicity of chemicalsSYMP-02Gianluca CIARDELLI, Politecnico di Torino

    person_pinGianluca CIARDELLI, Politecnico di Torino, Torino, Italy
    12:05 | FP02 Antioxidant - Firefly-Bioinspired Hydrogels with Redox-responsiveness as Cell-encapsulating Injectable MatricesSYMP-02Minye JIN, INM – Leibniz Institute for New Materials. Campus D2-2, 66123, Saarbrücken, Germany; Chemistry Department, Saarland University. 66123, Saarbrücken, Germany; University of Twente. Drienerlolaan 5, 7522 NB, Enschede, The Netherlands.
    Alisa GLÄSER, INM-Leibniz Institute for New Materials
    Supun MOHOTTI, INM-Leibniz Institute for New Materials
    Julieta PAEZ, University of Twente

    person_pinMinye JIN, INM – Leibniz Institute for New Materials. Campus D2-2, 66123, Saarbrücken, Germany; Chemistry Department, Saarland University. 66123, Saarbrücken, Germany; University of Twente. Drienerlolaan 5, 7522 NB, Enschede, The Netherlands.
    10:30 | KL Contactless - Contactless Bioassembly Processes For Controlling Tissue OrganizationSYMP-03Tiziano SERRA, AO Research Institute

    person_pinTiziano SERRA, AO Research Institute, Davos Platz, Switzerland
    11:00 | O1 Contactless - Novel Electro-Assisted Printing of Soft Hydrogels by ElectrochemistrySYMP-03Arua DA SILVA, Implantable Bioelectronics Laboratory. Department of Automatic Control and Systems Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK
    Junzhi WANG, Implantable Bioelectronics Laboratory. Department of Automatic Control and Systems Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK
    Teuku AKBAR, Leibniz Institute of Polymer Research Dresden, Dresden, Germany.
    Christoph TONDERA, Leibniz Institute of Polymer Research Dresden, Dresden, Germany.
    Ivan MINEV, Implantable Bioelectronics Laboratory. Department of Automatic Control and Systems Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK.

    person_pinArua DA SILVA, Implantable Bioelectronics Laboratory. Department of Automatic Control and Systems Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK
    11:15 | O2 Contactless - Additive Manufacturing for the Development of Microneedle Arrays as Minimally Invasive Drug Delivery SystemsSYMP-03Nikoletta SARGIOTI, School of Mechanical and Manufacturing Engineering, Dublin City University; School of Mechanical Materials Engineering, University College Dublin, Ireland
    Tanya LEVINGSTONE, School of Mechanical and Manufacturing Engineering, Dublin City University, Ireland
    Eoin O'CEARBHAILL, School of Mechanical Materials Engineering, University College Dublin, Ireland
    Helen MCCARTHY, School of Pharmacy, Queen’s University Belfast, Belfast, United Kingdom
    Nicholas DUNNE, School of Mechanical and Manufacturing Engineering, Dublin City University, Ireland

    person_pinNikoletta SARGIOTI, School of Mechanical and Manufacturing Engineering, Dublin City University; School of Mechanical Materials Engineering, University College Dublin, Ireland
    11:30 | O3 Contactless - Magnetic and Matrix-assisted 3D Bioprinting for Biomimetic Tendon Tissue ModelSYMP-03Syeda Mahwish BAKHT, 13B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Braga/Guimarães, Portugal
    Alberto PARDO, 13B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark – Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805?017 Barco GMR, Portugal. 2ICVS/3B's–PT Government Associate Laboratory, Braga/Guimarães, Portugal. 3Colloids and Polymers Physics Group, Particle Physics Department and Health Research Institute, University of Santiago de Compostela, 15782 Santiago de Compostela, Spain.
    Manuel Gómez FLORIT, 13B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark ? Parque de Ciência e Tecnologia, Zona Industrial da Gandra, Barco, Guimarães, 4805?017 Barco, Portugal 2ICVS/3B's–PT Government Associate Laboratory, Braga/Guimarães, Portugal
    Simão P. B. TEIXEIRA, 13B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark ? Parque de Ciência e Tecnologia, Zona Industrial da Gandra, Barco, Guimarães, 4805?017 Barco, Portugal 2ICVS/3B's–PT Government Associate Laboratory, Braga/Guimarães, Portugal
    Rui M. A. DOMINGUES, 13B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark ? Parque de Ciência e Tecnologia, Zona Industrial da Gandra, Barco, Guimarães, 4805?017 Barco, Portugal 2ICVS/3B's–PT Government Associate Laboratory, Braga/Guimarães, Portugal
    Manuela E. GOMES, 13B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark ? Parque de Ciência e Tecnologia, Zona Industrial da Gandra, Barco, Guimarães, 4805?017 Barco, Portugal 2ICVS/3B's–PT Government Associate Laboratory, Braga/Guimarães, Portugal

    person_pinSyeda Mahwish BAKHT, 13B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Braga/Guimarães, Portugal
    11:45 | O4 Contactless - A micro physiological system recapitulating inflammation in a microtissueSYMP-03Martin FRAUENLOB, Institut Pasteur, Biomaterials and Microfluidics core facility, C2RT, Paris, France & Bioassays, Microsystems and Optical Engineering Unit, BIOASTER, Paris, France
    Laurent BELOEIL, BIOASTER Technology Research Institute, Lyon, France
    Benoit BEITZ, Bioassays, Microsystems and Optical Engineering Unit, BIOASTER, Paris, France
    Christophe VEDRINE, Bioassays, Microsystems and Optical Engineering Unit, BIOASTER, Paris, France
    Gabriele PITINGOLO, Bioassays, Microsystems and Optical Engineering Unit, BIOASTER, Paris, France
    Samy GOBAA, Institut Pasteur, Biomaterials and Microfluidics core facility, C2RT, Paris, France

    person_pinMartin FRAUENLOB, Institut Pasteur, Biomaterials and Microfluidics core facility, C2RT, Paris, France & Bioassays, Microsystems and Optical Engineering Unit, BIOASTER, Paris, France
    12:00 | FP01 Contactless - In vitro and in vivo characterization of a novel tricalcium silicate-based ink for bone regeneration using Laser-Assisted BioprintingSYMP-03Nicolas TOUYA, INSERM U1026 BIOTIS

    person_pinNicolas TOUYA, INSERM U1026 BIOTIS
    12:05 | FP02 Contactless - Physical and biological behaviour of flowable fiber reinforced composite compared to alternative bulk filling compositesSYMP-03Nina ATTIK, Université de Lyon — Université Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, Lyon, France; Universitéde Lyon, Université Claude Bernard Lyon 1, Faculté d’Odontologie, Lyon, France
    Pierre COLON, Assistance Publique-Hôpitaux de Paris, Hôpital Rothschild, Service d’Odontologie, Université de Paris, Faculté dentaire, Paris, France
    Rémy GAUTHIER, Université de Lyon, CNRS, INSA Lyon, UCBL, MatéIS, France
    Charlène CHEVALIER, Université de Lyon — Université Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, Lyon, France
    Brigitte GROSGOGEAT, Université de Lyon — Université Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, Lyon, France
    Hazem ABOUELLEIL, Université de Lyon — Université Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, Lyon, France

    person_pinNina ATTIK, Université de Lyon — Université Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, Lyon, France; Universitéde Lyon, Université Claude Bernard Lyon 1, Faculté d’Odontologie, Lyon, France
    12:10 | FP03 Contactless - Hybrid HMSCs-Microcomposite Building Blocks for Bottom-Up Engineering of Bone TissueSYMP-03K. SONG, Department of Instructive Biomaterials Engineering, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, The Netherlands
    Zeinab TAHMASEBI BIRGANI, 0616193079
    Pamela HABIBOVIC, 83155
    Roman TRUCKENMÜLLER, 0614340516

    person_pinK. SONG, Department of Instructive Biomaterials Engineering, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, The Netherlands
    10:30 | KL Immunomodulatory - Medical device personalisation via multifunctional, immunomodulatory biomaterials; decreasing the complications and improving the healingTech S1NIHAL ENGIN VRANA, SPARTHA MEDICAL, Strasbourg, France

    person_pinNIHAL ENGIN VRANA, SPARTHA MEDICAL, Strasbourg, France
    10:45 | O1 Immunomodulatory - Introducing Controlled Topography onto 3D Scaffolds via Digital Light Processing to Modulate the Immune ResponseTech S1Leire ITURRIAGA OÑARTE-ECHEVERRIA, POLYMAT Basque Center for Macromolecular Design and Engineering
    Garazi LARRAÑAGA-JAURRIETA, POLYMAT Basque Center for Macromolecular Design and Engineering
    Sandra RAMOS, POLYMAT Basque Center for Macromolecular Design and Engineering
    Sandra CAMARERO-ESPINOSA, POLYMAT, University of the Basque Country UPV/EHU, Donostia / San Sebastián 20018, Gipuzkoa, Spain; IKERBASQUE, Basque Foundation for Science, Bilbao, Spain

    person_pinSandra CAMARERO-ESPINOSA, POLYMAT, University of the Basque Country UPV/EHU, Donostia / San Sebastián 20018, Gipuzkoa, Spain; IKERBASQUE, Basque Foundation for Science, Bilbao, Spain
    11:00 | O2 Immunomodulatory - Nanoscale spatio-mechanical regulation of the immune signaling in cytotoxic lymphocytesTech S1Mark SCHVARTZMAN, Ben-Gurion University of the Negev,Beer-Sheba, Israel

    person_pinMark SCHVARTZMAN, Ben-Gurion University of the Negev,Beer-Sheba, Israel
    11:15 | O3 Immunomodulatory - Bridging the Gap Between the Immune Response and Mineralization During Fracture HealingTech S1William Arthur LACKINGTON, Biointerfaces Lab, Empa, St. Gallen, Switzerland
    Matthias WIESLI, Biointerfaces Lab, Empa, St. Gallen, Switzerland
    Arlyng GONZÁLEZ VÁZQUEZ, Tissue Engineering Research Group, RCSI University of Medicine and Health Sciences, Dublin, Ireland
    Fergal O'BRIEN, Tissue Engineering Research Group, RCSI University of Medicine and Health Sciences, Dublin, Ireland
    Katharina MANIURA, Biointerfaces Lab, Empa, St. Gallen, Switzerland
    Markus ROTTMAR, Biointerfaces Lab, Empa, St. Gallen, Switzerland

    person_pinWilliam Arthur LACKINGTON, Biointerfaces Lab, Empa, St. Gallen, Switzerland
    11:30 | KL1 Advances in characterization - New advances in preclinical validation tools through biofabricated human 3d tissue equivalents-on chips integrated with innovative nmr spectroscopyTech S2Jochen SALBER, Department of Experimental Surgery/Centre for Clinical Research, Ruhr University
    Dierk GRUHN, Department of Experimental Surgery/Centre for Clinical Research, Ruhr University
    Sarah KLAUMANN, Department of Experimental Surgery/Centre for Clinical Research, Ruhr University
    Ayesha IDREES, Department of Experimental Surgery/Centre for Clinical Research, Ruhr University; Department of Mechanical and Aerospace Engineering (DIMEAS), Politecnico di Torino, Turin, Italy
    Alexander SIEBERATH, Department of Experimental Surgery/Centre for Clinical Research, Ruhr University
    Valeria CHIONO, Department of Mechanical and Aerospace Engineering (DIMEAS), Politecnico di Torino
    Roland HERGENRÖDER, Leibniz-Institut für Analytische Wissenschaften - ISAS - e.V.

    person_pinJochen SALBER, Department of Experimental Surgery/Centre for Clinical Research, Ruhr University, Bochum, Germany
    11:45 | O1 Advances in characterization - Real time imaging of local O2 for quantitative analysis of O2 distribution and consumption rates during early degradation of Magnesium alloysTech S2Ashwini Rahul AKKINENI, Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine of Technische Universität Dresden, Germany
    Berit ZELLER-PLUMHOFF, Institute of Metallic Biomaterials, Helmholtz-Zentrum Hereon, Geesthacht, Germany & Kiel Nano, Surface and Interface Science KiNSIS, Kiel University, Germany
    Heike HELMHOLZ, Institute of Metallic Biomaterials, Helmholtz-Zentrum Hereon, Geesthacht, Germany
    Björn WIESE, Institute of Metallic Biomaterials, Helmholtz-Zentrum Hereon, Geesthacht, Germany
    Dmytro ORLOV, Division of Materials Engineering LTH, Lund University, Lund, Sweden
    Michael KÜHL, Marine Biology Section, Department of Biology, University of Copenhagen, Denmark
    Regina WILLUMEIT-RÖMER, Institute of Metallic Biomaterials, Helmholtz-Zentrum Hereon, Geesthacht, Germany
    Michael GELINSKY, Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine of Technische Universität Dresden, Germany

    person_pinAshwini Rahul AKKINENI, Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine of Technische Universität Dresden, Germany
    12:00 | O2 Advances in characterization - CHROMATIN COMPACTION DECREASES CELL ADHESION STRENGTH: A QUANTITATIVE APPROACH BY FLUIDIC FORCE MICROSCOPYTech S2Julie BUISSON, Inserm UMR-1121, Laboratory of Biomaterials and Bioengineering, Centre de Recherche en Biomédecine de Strasbourg (CRBS), Strasbourg, France
    Xinyu ZHANG , Laboratory of Biosensors and Bioelectronics
    Pierre SCHAAF , Inserm UMR-1121, Laboratory of Biomaterials and Bioengineering
    Philippe LAVALLE, Inserm UMR-1121, Laboratory of Biomaterials and Bioengineering
    Tomaso ZAMBELLI, Laboratory of Biosensors and Bioelectronics, Department of Information Technology and Electrical Engineering
    Dominique VAUTIER, Inserm UMR-1121, Laboratory of Biomaterials and Bioengineering
    Morgane RABINEAU, Inserm UMR-1121, Laboratory of Biomaterials and Bioengineering

    person_pinJulie BUISSON, Inserm UMR-1121, Laboratory of Biomaterials and Bioengineering, Centre de Recherche en Biomédecine de Strasbourg (CRBS), Strasbourg, France
    12:15 | O3 Advances in characterization - How the physicochemical characteristics and protein corona modulate the activity of nanostructured lipid carriers (NLC) against Helicobacter pyloriTech S2Rute CHITAS, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal; ICBAS – Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, Porto, Portugal
    Catarina L. SEABRA, LAQV-REQUIMTE, Departamento de Ciências Químicas, Faculdade de Farmácia, Universidade do Porto, Porto, Portugal
    Cláudia NUNES, LAQV-REQUIMTE, Departamento de Ciências Químicas, Faculdade de Farmácia, Universidade do Porto, Porto, Portugal
    Paula PARREIRA, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal
    M. Cristina L. MARTINS, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal; ICBAS – Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, Porto, Portugal

    person_pinRute CHITAS, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal; ICBAS – Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, Porto, Portugal
    15:30 | KL Wiley - Scientific Publishing with ImpactWSIrem BAYINDIR-BUCHHALTER, Wiley-VCH

    person_pinIrem BAYINDIR-BUCHHALTER, Wiley-VCH, Weinheim, Germany
    16:00 | O1 Wiley - Mechanotransduction in High Aspect Ratio Nanostructured Meta-biomaterialsWSKhashayar MODARESIFAR, Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology, Delft, The Netherlands
    Mahya GANJIAN, Delft University of Technology
    Pedro DÍAZ-PAYNO, Delft University of Technology
    Maria KLIMOPOULOU, Delft University of Technology
    Lidy FRATILA-APACHITEI, Delft University of Technology
    Amir ZADPOOR, Delft University of Technology

    person_pinKhashayar MODARESIFAR, Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology, Delft, The Netherlands
    16:15 | O2 Wiley - Development of a Vascularized Tissue Model: Focus on the Stromal/Vascular Interaction and on 3D ImagingWSAlessandra DELLAQUILA, Université Paris Cité, INSERM U1148, Paris, France
    France LAM, IBPS, Université de Paris-Sorbonne, Paris, France
    Susanne BOLTE, IBPS, Université de Paris-Sorbonne, Paris, France
    Didier LETOURNEUR, Université Paris Cité, INSERM U1148, Paris, France
    Teresa SIMON-YARZA, Université Paris Cité, INSERM U1148, Paris, France

    person_pinAlessandra DELLAQUILA, Université Paris Cité, INSERM U1148, Paris, France
    15:30 | O1 Osteoarticular - Comparison of the degradation behavior of WE43-based magnesium screws with and without PEO-surface modification in a miniature pig model PSOP-03Heilwig FISCHER, 1 Center for Musculoskeletal Surgery, Charité – Universitätsklinikum Berlin, Berlin, Germany 2 Department of Oral and Maxillofacial Surgery, Charité – Universitätsklinikum Berlin, Berlin, Germany 3 Berlin Institute of Health at Charité – Universitätsmedizin Berlin, Berlin, Germany
    Katharina SCHMIDT-BLEEK, Julius Wolff Institute, Charité – Universitätsmedizin, Berlin, Berlin, Germany
    Ole JUNG, Clinic and Policlinic for Dermatology and Venereology, University Medical Center Rostock, Germany
    Ralf SMEETS, Department of Oral and Maxillofacial Surgery, University Medical Center Hamburg-Eppendorf, Hamburg, Germany
    Georg N. DUDA, Julius Wolff Institute, Charité – Universitätsmedizin, Berlin, Berlin, Germany
    Alexander KOPP, Meotec GmbH, Aachen, Germany
    Max HEILAND, Department of Oral and Maxillofacial Surgery, Charité – Universitätsklinikum Berlin, Berlin, Germany
    Carsten RENDENBACH, Department of Oral and Maxillofacial Surgery, Charité – Universitätsklinikum Berlin, Berlin, Germany

    person_pinHeilwig FISCHER, 1 Center for Musculoskeletal Surgery, Charité – Universitätsklinikum Berlin, Berlin, Germany 2 Department of Oral and Maxillofacial Surgery, Charité – Universitätsklinikum Berlin, Berlin, Germany 3 Berlin Institute of Health at Charité – Universitätsmedizin Berlin, Berlin, Germany
    15:45 | O2 Osteoarticular - Effects of Nanostructured and Microstructured Calcium Phosphates on In Vitro Osteoblast ResponsePSOP-03Edgar B. MONTUFAR, Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic
    Carolina OLIVER-URRUTIA, Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic
    Mariano CASAS-LUNA, Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic
    Veronika HEFKA BLAHNOVA, Institute of Experimental Medicine, Czech Academy of Sciences, Prague, Czech Republic
    Vera LUKASOVA, Institute of Experimental Medicine, Czech Academy of Sciences, Prague, Czech Republic
    Eva FILOVA, Institute of Experimental Medicine, Czech Academy of Sciences, Prague, Czech Republic
    Karel DVORAK, Faculty of Civil Engineering, Brno University of Technology, Brno, Czech Republic
    Ales DANHEL, Institute of Biophysics, Czech Academy of Sciences, Brno, Czech Republic
    Karel SLAMECKA, Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic
    Ladislav CELKO, Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic

    person_pinEdgar B. MONTUFAR, Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic
    16:00 | O3 Osteoarticular - Multiscale Characterization and Biological Assessment of Pyrophosphate-Stabilized Amorphous Calcium Carbonate Doped with Bioactive IonsPSOP-03Marion MERLE, CIRIMAT, Université de Toulouse, CNRS, TOULOUSE INP - ENSIACET, Toulouse, France
    Jérémy SOULIÉ, CIRIMAT, Université de Toulouse, CNRS, TOULOUSE INP - ENSIACET, Toulouse, France
    Christian REY, CIRIMAT, Université de Toulouse, CNRS, TOULOUSE INP - ENSIACET, Toulouse, France
    Pierre ROBLIN, LGC, CNRS, Université de Toulouse, 118 route de Narbonne Bâtiment 2R1, Toulouse, France
    Capucine SASSOYE, Sorbonne Université, CNRS, LCMCP, Paris, France
    Christian BONHOMME, Sorbonne Université, CNRS, LCMCP, Paris, France
    Shunfeng WANG, Institute for Physiological Chemistry, University Medical Center of the Johannes Gutenberg University, Mainz, Germany
    Werner E.G. MÜLLER, Institute for Physiological Chemistry, University Medical Center of the Johannes Gutenberg University, Mainz, Germany
    Christèle COMBES, CIRIMAT, Université de Toulouse, CNRS, TOULOUSE INP - ENSIACET, Toulouse, France

    person_pinChristèle COMBES, CIRIMAT, Université de Toulouse, CNRS, TOULOUSE INP - ENSIACET, Toulouse, France
    16:15 | O4 Osteoarticular - Targeting HIF Pathway for Personalised Bone Regeneration in Diabetic PatientsPSOP-03Adriana-Monica RADU, Division of Surgery and Interventional Sciences, University College London, London, United Kingdom
    Yutong Amy LI, University College London
    Azadeh REZAEI, University College London
    Joel TURNER, University College London
    Gavin JELL, University College London

    person_pinAdriana-Monica RADU, Division of Surgery and Interventional Sciences, University College London, London, United Kingdom
    15:30 | O1 Bioderived - Bioinks derived from human amniotic membrane and proof-of-principle application to bioprintingPSOP-04Léo COMPERAT, Inserm U1026, Tissue Bioengineering, ART BioPrint, F-33076, Bordeaux, France
    Lise CHAGOT, Inserm U1026, Tissue Bioengineering, ART BioPrint, F-33076, Bordeaux, France
    Sarah MASSOT, Inserm U1026, Tissue Bioengineering, ART BioPrint, F-33076, Bordeaux, France
    Chantal MÉDINA, Inserm U1026, Tissue Bioengineering, ART BioPrint, F-33076, Bordeaux, France
    Nathalie DUSSERRE, Inserm U1026, Tissue Bioengineering, ART BioPrint, F-33076, Bordeaux, France
    Marie-Laure STACHOWICZ , Inserm U1026, Tissue Bioengineering, ART BioPrint, F-33076, Bordeaux, France
    Jean-Christophe FRICAIN, Inserm U1026, Tissue Bioengineering, ART BioPrint, F-33076, Bordeaux, France ; CHU Bordeaux, Services d’Odontologie et de Santé Buccale, F-33076 Bordeaux, France
    Hugo DE OLIVERIA, Inserm U1026, Tissue Bioengineering, ART BioPrint, F-33076, Bordeaux, France

    person_pinLéo COMPERAT, Inserm U1026, Tissue Bioengineering, ART BioPrint, F-33076, Bordeaux, France
    15:45 | O2 Bioderived - Engineering a Tendon-Bone Enthesis-Mimicking Hybrid Matrix for Repair of Irreparable Rotator Cuff TearsPSOP-04Jeremy MORTIMER, Department of Orthopaedics & Musculoskeletal Science, Division of Surgery & Interventional Science, University College London (UCL), Royal National Orthopaedic Hospital, London, United Kingdom
    Maryam TAMADDON, Department of Orthopaedics & Musculoskeletal Science, Division of Surgery & Interventional Science, University College London (UCL), Royal National Orthopaedic Hospital, London, United Kingdom
    Chaozong LIU, Department of Orthopaedics & Musculoskeletal Science, Division of Surgery & Interventional Science, University College London (UCL), Royal National Orthopaedic Hospital, London, United Kingdom

    person_pinChaozong LIU, Department of Orthopaedics & Musculoskeletal Science, Division of Surgery & Interventional Science, University College London (UCL), Royal National Orthopaedic Hospital, London, United Kingdom
    16:00 | O3 Bioderived - Production of mineralised collagen films using electrophoretic depositionPSOP-04Katrina STAUNTON, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
    David BARRETT, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
    Ruth CAMERON, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
    Serena BEST, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK

    person_pinKatrina STAUNTON, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
    16:15 | O4- Bioderived - Tuning the bioactivity of MSC-secreted ECM through control of substrate stiffnessPSOP-04Daniel HEATH, Department of Biomedical Engineering, University of Melbourne, Parkville, Australia

    person_pinDaniel HEATH, Department of Biomedical Engineering, University of Melbourne, Parkville, Australia
    15:30 | O1 Surface - Bone Adhesive with High Mechanical Strength and Natural Bone Replacing Capabilities Shows Clinical Potential in Implant Fixation to Osteoporotic Bone.PSOP-05Ivana IVANKOVIC, PBC Biomed, Shannon, Ireland
    Gerard INSLEY, PBC Biomed, Shannon, Ireland
    Enda LARKIN, University College Dublin, Ireland
    Robert FLAVIN, St. Vincents University Hospital, Ireland

    person_pinGerard INSLEY, PBC Biomed, Shannon, Ireland
    15:45 | O2 Surface - Development of tough 3D-printed biomimetic calcium phosphate scaffolds for bone regenerationPSOP-05Laura DEL MAZO BARBARA, Biomaterials, Biomechanics and Tissue Engineering Group, Department of Materials Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Spain; Barcelona Research Centre for Multiscale Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Spain
    Linh JOHANSSON, Biomaterials, Biomechanics and Tissue Engineering Group, Department of Materials Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Spain; Barcelona Research Centre for Multiscale Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Spain; Mimetis Biomaterials S.L., Barcelona, Spain
    Maria-Pau GINEBRA, Biomaterials, Biomechanics and Tissue Engineering Group, Department of Materials Science and Engineering, Universitat Politècnica de Catalunya; Barcelona Research Centre for Multiscale Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Spain

    person_pinMaria-Pau GINEBRA, Biomaterials, Biomechanics and Tissue Engineering Group, Department of Materials Science and Engineering, Universitat Politècnica de Catalunya; Barcelona Research Centre for Multiscale Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Spain
    16:00 | O3 Surface - Bone sialoprotein immobilized in collagen type I induces bone regeneration in vitro and in vivo PSOP-05Anja KRIEGEL, Department of Orthopedics and Traumatology, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany
    Christian SCHLOSSER, Department of Orthopedics and Traumatology, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany
    Christoph DAHMEN, Department of Orthopedics and Traumatology, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany
    Hermann GOETZ, Cell Biology Unit, PKZI, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany
    Franziska CLAUDER, Immundiagnostik AG, Bensheim, Germany
    Franz Paul ARMBRUSTER, Immundiagnostik AG, Bensheim, Germany
    Andreas BARANOSKI, Department of Orthopedics and Traumatology, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany
    Philipp DREES, Department of Orthopedics and Traumatology, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany
    Pol Maria ROMMENS, Department of Orthopedics and Traumatology, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany
    Ulrike RITZ, Department of Orthopedics and Traumatology, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany

    person_pinUlrike RITZ, Department of Orthopedics and Traumatology, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany
    16:15 | O4 Surface - Surface Modifications on Titanium Alloy : A Promising Way to Understand and Fight Implant- Related InfectionPSOP-05Jennifer VARIN-SIMON, University of Reims Champagne-Ardenne
    Amina ARAHOUNI, IREPA LASER
    Frédéric MERMET, IREPA LASER
    Anais LEMAIRE, University of Reims Champagne-Ardenne
    Marius COLIN, University of Reims Champagne-Ardenne
    Léa THORAVAL, University of Reims Champagne-Ardenne
    Fany REFFUVEILLE, University of Reims Champagne-Ardenne
    Frédéric VELARD, University of Reims Champagne-Ardenne

    person_pinFrédéric VELARD, University of Reims Champagne-Ardenne, Reims, France
    15:30 | O1 Processing - Fetuin A functionalization of biodegradable nonwovens towards biomimetic guided bone regenerationPSOP-06Stefan OSCHATZ, Institute for Biomedical Engineering, Rostock University Medical Center, Rostock, Germany
    Michael TESKE, Institute for Biomedical Engineering, Rostock University Medical Center, Rostock, Germany
    Jana MARKHOFF, Institute for Biomedical Engineering, Rostock University Medical Center, Rostock, Germany
    Ulrike BURMEISTER, Department of Operative Dentistry and Periodontology, Rostock University Medical Center, Rostock, Germany
    Sabine ILLNER, Institute for Biomedical Engineering, Rostock University Medical Center, Rostock, Germany
    Hermann LANG, Department of Operative Dentistry and Periodontology, Rostock University Medical Center, Rostock, Germany
    Niels GRABOW, Institute for Biomedical Engineering, Rostock University Medical Center, Rostock, Germany

    person_pinStefan OSCHATZ, Institute for Biomedical Engineering, Rostock University Medical Center, Rostock, Germany
    15:45 | O2 Processing - The freeze-casting process: a promising tool for the fabrication of macroporous composite scaffolds for bone substitutionPSOP-06Prescillia LAGARRIGUE, CIRIMAT, Université de Toulouse, CNRS, Toulouse INP - ENSIACET, Toulouse, France
    Marion MERLE, CIRIMAT, Université de Toulouse, CNRS, Toulouse INP - ENSIACET, Toulouse, France
    Gabriele VECCHIO, IBMM, Université de Montpellier, CNRS, Toulouse INP - ENSIACET, Toulouse, France
    Mariane SCHARDOSIM, PUCRS, GEPSI-LMN, Porto Alegre, Brazil
    Jae-Min OH, Department of Energy and Materials Engineering, Dongguk University, Seoul, Republic of Korea
    Benjamin DUPLOYER, CIRIMAT, Université de Toulouse, CNRS, Université Paul Sabatier, Toulouse, France
    Christophe TENAILLEAU, CIRIMAT, Université de Toulouse, CNRS, Université Paul Sabatier, Toulouse, France
    Guillaume BROTONS, MMM, CNRS, Le Mans Université, Le Mans, France
    Pierre ROBLIN, LGC, CNRS, Université de Toulouse, Toulouse, France
    Sophie CAZALBOU, CIRIMAT, Université de Toulouse, CNRS, Université Paul Sabatier, Toulouse, France
    Christian REY, CIRIMAT, Université de Toulouse, CNRS, Toulouse INP - ENSIACET, Toulouse, France
    Vincent DARCOS, IBMM, Université de Montpellier, CNRS, Toulouse INP - ENSIACET, Toulouse, France
    David GROSSIN, CIRIMAT, Université de Toulouse, CNRS, Toulouse INP - ENSIACET, Toulouse, France
    Christophe DROUET, 'Christophe DROUET'
    Christèle COMBES, CIRIMAT, Université de Toulouse, CNRS, Toulouse INP - ENSIACET, Toulouse, France
    Jérémy SOULIE, CIRIMAT, Université de Toulouse, CNRS, Toulouse INP - ENSIACET, Toulouse, France

    person_pinJérémy SOULIE, CIRIMAT, Université de Toulouse, CNRS, Toulouse INP - ENSIACET, Toulouse, France
    16:00 | O3 Processing - Three-dimensional Architectural Design and Assessment of Ice-templated Collagen Scaffolds for Tissue Engineering ApplicationsPSOP-06Huijie Lillian ZHANG, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
    Ben STEEL, Department of Materials Science and Metallurgy, University of Cambridge
    Ruth CAMERON, Department of Materials Science and Metallurgy, University of Cambridge
    Serena BEST, Department of Materials Science and Metallurgy, University of Cambridge

    person_pinHuijie Lillian ZHANG, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
    16:15 | O4 Processing - Versatile method for high-throughput fabrication of microparticles with defined geometries and size for biomedical applicationsPSOP-06Marta MACIEL, CEB -Center of Biological Engineering, University of Minho, Braga, Portugal; CICECO – Institute of Materials of Aveiro, University of Aveiro, Aveiro, Portugal
    Max VAN DE VOORT, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Netherlands
    Mariana CARREIRA, CICECO – Institute of Materials of Aveiro, University of Aveiro, Aveiro, Portugal
    Tiago CORREIA, CICECO – Institute of Materials of Aveiro, University of Aveiro, Aveiro, Portugal
    Lorenzo MORONI, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Netherlands
    João MANO, CICECO – Institute of Materials of Aveiro, University of Aveiro, Aveiro, Portugal

    person_pinMarta MACIEL, CEB -Center of Biological Engineering, University of Minho, Braga, Portugal; CICECO – Institute of Materials of Aveiro, University of Aveiro, Aveiro, Portugal
    15:30 | O1 Soft tissue - Pathogen-Resistant Dermal Clay Dressings for Healing Burns, Wounds, and ScarsPSOP-07Kausik MUKHOPADHYAY, Department of Materials Science and Engineering, University of Central Florida. Orlando. USA
    Suvash GHIMIRE, Department of Materials Science and Engineering, University of Central Florida. Orlando. USA

    person_pinKausik MUKHOPADHYAY, Department of Materials Science and Engineering, University of Central Florida. Orlando. USA
    15:45 | O2 Soft Tissue - Porous Poly(glycerol sebacate)-based Scaffolds for Adipose Tissue Engineering ApplicationsPSOP-07Rachel FURMIDGE, Materials Science and Engineering, Kroto Research Institute, The University of Sheffield, Sheffield, UK
    Victoria WORKMAN, The University of Sheffield
    Victoria GIBLIN, Department of Plastic Surgery, Sheffield Teaching Hospitals NHS Trust, Sheffield, UK
    Frederik CLAEYSSENS, The University of Sheffield
    Vanessa HEARNDEN, The University of Sheffield

    person_pinRachel FURMIDGE, Materials Science and Engineering, Kroto Research Institute, The University of Sheffield, Sheffield, UK
    16:00 | O3 Soft Tissue - Advanced Synthetic Materials for 3D Printing Applications and its Use as Scaffolds for Airway Regeneration.PSOP-07Luis SORIANO, School of Pharmacy and Biomolecular Sciences, RCSI, Dublin, Ireland; Tissue Engineering Research Group, RCSI, Dublin, Ireland; SFI Centre for Research in Medical Devices (CÚRAM), NUI, Galway, Ireland
    Bo LI, Department of Chemistry, RCSI, Dublin, Ireland
    Cian O'LEARY, School of Pharmacy and Biomolecular Sciences, RCSI, Dublin, Ireland; Tissue Engineering Research Group, RCSI, Dublin, Ireland; SFI Centre for Research in Medical Devices (CÚRAM), NUI, Galway, Ireland
    Fergal J. O'BRIEN, Tissue Engineering Research Group, RCSI, Dublin, Ireland
    Andreas HEISE, Department of Chemistry, RCSI, Dublin, Ireland
    Sally-Ann CRYAN, School of Pharmacy and Biomolecular Sciences, RCSI, Dublin, Ireland; Tissue Engineering Research Group, RCSI, Dublin, Ireland; SFI Centre for Research in Medical Devices (CÚRAM), NUI, Galway, Ireland

    person_pinLuis SORIANO, School of Pharmacy and Biomolecular Sciences, RCSI, Dublin, Ireland; Tissue Engineering Research Group, RCSI, Dublin, Ireland; SFI Centre for Research in Medical Devices (CÚRAM), NUI, Galway, Ireland
    16:15 | O4 Soft Tissue - A PGSAA-based adhesive filler for perianal fistulasPSOP-07Elodie LLUSAR, TISSIUM, Paris, France
    Miguel LOPES, TISSIUM
    Prune GERBOUIN, TISSIUM
    Maria PEREIRA, TISSIUM

    person_pinElodie LLUSAR, TISSIUM, Paris, France
    17:15 | KL1 Canadian Society & ESB - Targeted Gene Delivery of Interleukin-10 via Polymer Nanoparticles to Reduce the Inflammation in AtherosclerosisNicholas DISTASIO, McGill University
    Stephanie LEHOUX, McGill University
    Maryam TABRIZIAN, Department of Biomedical Engineering; Faculty of Dentistry and Oral Health Sciences, Montreal, Canada

    person_pinMaryam TABRIZIAN, Department of Biomedical Engineering; Faculty of Dentistry and Oral Health Sciences, Montreal, Canada
    17:30 | KL2 Canadian Society & ESB - Innovative 3D Autologous and Immunocompetent Skin Model Reconstructed by Tissue EngineeringEmilie ATTIOGBE, Centre de Recherche en Organogénèse Expérimentale de l’Université Laval (LOEX), Québec, QC, Canada / Centre de Recherche du CHU de Québec-Université Laval, Québec, QC, Canada
    Sébastien LAROCHELLE, Centre de Recherche en Organogénèse Expérimentale de l’Université Laval (LOEX), Québec, QC, Canada / Centre de Recherche du CHU de Québec-Université Laval, Québec, QC, Canada
    Carine MAINZER, R&D department, SILAB, Brive, France
    Brigitte CLOSS, R&D department, SILAB, Brive, France
    Caroline GILBERT, Centre de Recherche du CHU de Québec-Université Laval, Québec, QC, Canada / Faculté de Médecine, Université Laval, Québec, QC, Canada
    Véronique MOULIN, Centre de Recherche en Organogénèse Expérimentale de l’Université Laval (LOEX), Québec, QC, Canada / Centre de Recherche du CHU de Québec-Université Laval, Québec, QC, Canada / Faculté de Médecine, Université Laval, Québec, QC, Canada

    person_pinEmilie ATTIOGBE, Centre de Recherche en Organogénèse Expérimentale de l’Université Laval (LOEX), Québec, QC, Canada / Centre de Recherche du CHU de Québec-Université Laval, Québec, QC, Canada
    17:45 | O1 Canadian Society & ESB - Non-woven Textiles for Medical Implants: Mechanical Performances ImprovementFrederic HEIM, Laboratoire de Physique et Mécanique Textiles (LPMT), ENSISA, Mulhouse, France

    person_pinFrederic HEIM, Laboratoire de Physique et Mécanique Textiles (LPMT), ENSISA, Mulhouse, France
    18:00 | O2 Canadian Society & ESB - Effect of Synthetic INGAP-P on human islet insulin secretion and gene expressionJAMES PORTER, Dept. of Biological and Biomeidcal Engineering, McGill University, Montreal, Canada
    Maryam TABRIZIAN, McGill University

    person_pinJAMES PORTER, Dept. of Biological and Biomeidcal Engineering, McGill University, Montreal, Canada
    18:15 | O3 Canadian Society & ESB - Proteomics as a tool to gain next level insights into photo-crosslinkable biopolymer modificationsNele PIEN, Polymer Chemistry and Biomaterials Research Group, Centre of Macromolecular Chemistry (CMaC), Ghent University, Ghent, Belgium and Laboratory for Biomaterials and Bioengineering, CRC-I, Laval University, Quebec, Canada
    Fabrice BRAY, Miniturisation pour la Synthèse, l’Analyse et la Protéomique, CNRS, Université de Lille, Lille, France
    Tom GHEYSENS, Polymer Chemistry and Biomaterials Research Group, Centre of Macromolecular Chemistry (CMaC), Ghent University, Ghent, Belgium
    Liesbeth TYTGAT, Polymer Chemistry and Biomaterials Research Group, Centre of Macromolecular Chemistry (CMaC), Ghent University, Ghent, Belgium
    Christian ROLANDO, Miniturisation pour la Synthèse, l’Analyse et la Protéomique, CNRS, Université de Lille, Lille, France
    Diego MANTOVANI, Laboratory for Biomaterials and Bioengineering, CRC-I, Laval University, Quebec, Canada
    Peter DUBRUEL, Polymer Chemistry and Biomaterials Research Group, Centre of Macromolecular Chemistry (CMaC), Ghent University, Ghent, Belgium
    Sandra VAN VLIERBERGHE, Polymer Chemistry and Biomaterials Research Group, Centre of Macromolecular Chemistry (CMaC), Ghent University, Ghent, Belgium

    person_pinNele PIEN, Polymer Chemistry and Biomaterials Research Group, Centre of Macromolecular Chemistry (CMaC), Ghent University, Ghent, Belgium and Laboratory for Biomaterials and Bioengineering, CRC-I, Laval University, Quebec, Canada
    18:30 | O4 Canadian Society & ESB - Method for Covalent Bonding of Heparin to Carbon Nanotube-Coated Metal SurfacesLynn HEIN, Mechanical Engineering, McGill University, Montreal, Canada; Chemical Engineering, McGill University, Montreal, Canada

    person_pinLynn HEIN, Mechanical Engineering, McGill University, Montreal, Canada; Chemical Engineering, McGill University, Montreal, Canada
    17:15 | KL1 SFB ESB - Photoinduced Hydrogel Network Reorganization Modulates Intestinal Organoid Epithelial Shape to Template Crypt FormationMax YAVITT, Chemical and Biological Engineering, University of Colorado Boulder, Boulder, Colorado, USA; BioFrontiers Institute, Boulder, Colorado, United States
    Michael BLATCHLEY, University of Colorado Boulder, BioFrontiers Institute
    Peter DEMPSEY, University of Colorado Anschutz Medical Campus
    Kristi ANSETH, University of Colorado Boulder, BioFrontiers Institute

    person_pinMax YAVITT, Chemical and Biological Engineering, University of Colorado Boulder, Boulder, Colorado, USA; BioFrontiers Institute, Boulder, Colorado, United States
    17:45 | KL2 SFB ESB - Artificial Extracellular Matrix Scaffolds Enhance Maturation of Human Stem Cell-Derived NeuronsZaida ALVAREZ PINTO, Simpson Querrey Institute for BioNanotechnology, Northwestern University, Chicago, USA//Institute for Bioengineering of Catalonia, IBEC, Barcelona, Spain
    Juan Alberto ORTEGA, Department of Pathology and Experimental Therapeutics, University of Barcelona, Barcelona, Spain
    Kohei SATO, Simpson Querrey Institute for BioNanotechnology, Northwestern University, Chicago, USA
    Ivan SASSELLI, Simpson Querrey Institute for BioNanotechnology, Northwestern University, Chicago, USA
    Elisabeth ENGEL, Institute for Bioengineering of Catalonia, IBEC, Barcelona, Spain
    Samuel STUPP, Simpson Querrey Institute for BioNanotechnology, Northwestern University, Chicago, USA//3Department of Chemistry, Northwestern University, Evanston, USA //Department of Materials Science and Engineering, Northwestern University, Evanston, USA //Department of Medicine, Northwestern University, Chicago, USA
    Evangelos KISKINIS, Simpson Querrey Institute for BioNanotechnology, Northwestern University, Chicago, USA //The Ken & Ruth Davee Department of Neurology, Northwestern University, Chicago, USA

    person_pinZaida ALVAREZ PINTO, Simpson Querrey Institute for BioNanotechnology, Northwestern University, Chicago, USA//Institute for Bioengineering of Catalonia, IBEC, Barcelona, Spain
    18:15 | O1 SFB ESB - Hydrogel Viscoelasticity Modulates Fusion of Mesenchymal Stem Cell SpheroidsMani DIBA, Laboratory for Cell and Tissue Engineering, John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, USA
    David WU, Laboratory for Cell and Tissue Engineering, John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, USA
    Stephanie YANG, Laboratory for Cell and Tissue Engineering, John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, USA
    Benjamin FREEDMAN, Laboratory for Cell and Tissue Engineering, John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, USA
    Alberto ELOSEGUI-ARTOLA, Laboratory for Cell and Tissue Engineering, John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, USA
    David MOONEY, Laboratory for Cell and Tissue Engineering, John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, USA

    person_pinMani DIBA, Laboratory for Cell and Tissue Engineering, John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, USA
    18:30 | O2 SFB ESB - Investigating the impact of Ti3C2TX (MXene) within an accommodative intraocular lens design on the development of posterior capsular opacificationGrace COOKSLEY, School of Pharmacy and Biomolecular Sciences, University of Brighton, Brighton, BN2 4GJ, UK; Rayner Intraocular Lenses, Limited., The Ridley Innovation Centre, Worthing, BN14 8AG, UK
    Joseph LACEY, Rayner Intraocular Lenses, Ltd.
    Marcus DYMOND, University of Brighton
    Yury GOGOTSI, Drexel University
    Susan SANDEMAN, University of Brighton

    person_pinGrace COOKSLEY, School of Pharmacy and Biomolecular Sciences, University of Brighton, Brighton, BN2 4GJ, UK; Rayner Intraocular Lenses, Limited., The Ridley Innovation Centre, Worthing, BN14 8AG, UK
    17:15 | O1 - Design of Advanced Polymer Biomaterials for the Treatment of Autoimmune DiseaseBiomaterials AwardsNicholas A PEPPAS, Department of Biomedical Engineering, Department of Chemical Engineering, Department of Pediatrics, Surgery and Perioperative Care, Dell Medical School, and Division of Molecular Pharmaceutics and Drug Delivery, The University of Texas at Austin, Austin, USA

    person_pinNicholas A PEPPAS, Department of Biomedical Engineering, Department of Chemical Engineering, Department of Pediatrics, Surgery and Perioperative Care, Dell Medical School, and Division of Molecular Pharmaceutics and Drug Delivery, The University of Texas at Austin, Austin, USA
    17:45 | O2 - Engineered biomaterials for lymph node drug delivery and disease modeling enable next-generation approaches in cancer immunotherapy Biomaterials AwardsSusan N. THOMAS, Woodruff School of Mechanical Engineering and Parker H. Petit Institute of Bioengineering and Bioscience, Georgia Institute of Technology, Atlanta, GA, USA

    person_pinSusan N. THOMAS, Woodruff School of Mechanical Engineering and Parker H. Petit Institute of Bioengineering and Bioscience, Georgia Institute of Technology, Atlanta, GA, USA
    18:15 | O3 - “Smart” Biodegradable Materials with Desired Shapes, Structures and Electroactive Functions at Nano/Micro-Scales For Medical ApplicationsBiomaterials AwardsThanh DUC NGUYEN, Department of Mechanical Engineering, Department of Biomedical Engineering, Institute of Materials Science, University of Connecticut, USA

    person_pinThanh DUC NGUYEN, Department of Mechanical Engineering, Department of Biomedical Engineering, Institute of Materials Science, University of Connecticut, USA
    17:15 | Award RSC - Lipid nanoparticles for mRNA therapeutics, genome editing, and cell therapyYizhou DONG, Division of Pharmaceutics and Pharmacology, College of Pharmacy, The Ohio State University

    person_pinYizhou DONG, Division of Pharmaceutics and Pharmacology, College of Pharmacy, The Ohio State University, Colombus, United States
    17:45 | O1 RSC - Novel mucoadhesive chitosan-methylcellulose buccal patches with broad antibacterial activityLorenzo BONETTI, Dept. of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, 20131, Milan, Italy
    Alice CAPRIOGLIO, Dept. of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, 20131, Milan (Italy)
    Nina BONO, Dept. of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, 20131, Milan (Italy)
    Gabriele CANDIANI, Dept. of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, 20131, Milan (Italy)
    Lina ALTOMARE, Dept. of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, 20131, Milan (Italy)

    person_pinLorenzo BONETTI, Dept. of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, 20131, Milan, Italy
    18:00 | O2 RSC - Functionalization of 3D printed PLLA/PLCL bioresorbable stents with endothelial cell adhesive peptidesVictor CHAUSSE, Biomaterials, Biomechanics and Tissue Engineering Group, Dept. of Materials Science and Engineering, Barcelona East School of Engineering (EEBE), Universitat Politècnica de Catalunya (UPC), Barcelona, Spain. Barcelona Research Center in Multiscale Science and Engineering, UPC, Barcelona, Spain
    Carlos MAS-MORUNO, Biomaterials, Biomechanics and Tissue Engineering Group, Dept. of Materials Science and Engineering, Barcelona East School of Engineering (EEBE), Universitat Politècnica de Catalunya (UPC), Barcelona, Spain. Barcelona Research Center in Multiscale Science and Engineering, UPC, Barcelona, Spain
    Marta PEGUEROLES, Biomaterials, Biomechanics and Tissue Engineering Group, Dept. of Materials Science and Engineering, Barcelona East School of Engineering (EEBE), Universitat Politècnica de Catalunya (UPC), Barcelona, Spain. Barcelona Research Center in Multiscale Science and Engineering, UPC, Barcelona, Spain

    person_pinVictor CHAUSSE, Biomaterials, Biomechanics and Tissue Engineering Group, Dept. of Materials Science and Engineering, Barcelona East School of Engineering (EEBE), Universitat Politècnica de Catalunya (UPC), Barcelona, Spain. Barcelona Research Center in Multiscale Science and Engineering, UPC, Barcelona, Spain
    18:15 | O3 RSC - Injectable Biomimetic Mussel – Based Adhesive for Bone Repair and Remodeling Antzela TZAGIOLLARI, School of Mechanical and Manufacturing Engineering, Dublin City University, Ireland
    Gerard INSLEY, PBC Biomed, Shannon, Ireland
    David KELLY, PBC Biomed, Shannon, Ireland
    Philip PROCTER, GP Bio Ltd., Rathkeale, Ireland
    Helen MCCARTHY, School of Pharmacy, Queen’s University Belfast, UK
    Tanya LEVINGSTONE, School of Mechanical and Manufacturing Engineering, Dublin City University, Ireland
    Nicholas DUNNE, School of Mechanical and Manufacturing Engineering, Dublin City University, Ireland

    person_pinAntzela TZAGIOLLARI, School of Mechanical and Manufacturing Engineering, Dublin City University, Ireland
    18:30 | O4 RSC - An iodine labeled injectable hyaluronic acid hydrogel for an in vivo bicolor x-ray monitoring of a biomimetic scaffold in brain regeneration cell therapyMoustoifa SAID, Univ Grenoble Alpes, Inserm, U1216, Grenoble Institut Neurosciences, Grenoble, France; Univ. Grenoble Alpes, Centre des Recherches sur les Macromolécules Végétales, CNRS UPR 5301, Grenoble, France
    Rachel AUZELY-VELTY, Centre des Recherches sur les Macromolécules Végétales (CERMAV) CNRS UPR 5301 - Université Grenoble Alpes
    Olivier DETANTE, Grenoble Institut Neurosciences - INSERM U1216 - Université Grenoble Alpes - CHU Grenoble Alpes
    Claire ROME, Grenoble Institut Neurosciences - INSERM U1216 - Université Grenoble Alpes

    person_pinMoustoifa SAID, Univ Grenoble Alpes, Inserm, U1216, Grenoble Institut Neurosciences, Grenoble, France; Univ. Grenoble Alpes, Centre des Recherches sur les Macromolécules Végétales, CNRS UPR 5301, Grenoble, France
    17:15 | KL1 BIOMAT & Human Repair - Wireless Theranostic Smart Contact Lens for Monitoring and Control of Intraocular Pressure in GlaucomaHahn SEI KWANG , Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), 77 Cheongam-ro, Nam-gu, Pohang, Gyeongbuk 37673, Korea
    Kim TAE YEON, Pohang University of Science and Technology (POSTECH)

    person_pinHahn SEI KWANG , Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), 77 Cheongam-ro, Nam-gu, Pohang, Gyeongbuk 37673, Korea
    17:45 | O1 BIOMAT & Human Repair - DIAPID project : an innovative prosthesis dedicated to childrenRodolphe MIGNERET, ICPEES, UMR 7515; CAMB, UMR 7199
    Julie FAVRE, BioMAT, UMR1121
    Ariane DAVID, FIMATHO, University Hospital of Lille
    Anne HEBRAUD, ICPEES, UMR 7515
    Guy SCHLATTER, ICPEES, UMR 7515
    Benoit FRISCH, CAMB, UMR 7199
    Cendrine SEGUIN, CAMB, UMR 7199
    Vincent BALL, BioMAT, UMR1121
    Nadia BAHLOULI, I Cube, UMR 7357
    Hamdi JMAL, I Cube, UMR 7357
    Duyti SHARMA, METRICS, URL 2694
    Isabelle TALON, BioMAT, UMR1121; University of Medecine and University Hospital of Strasbourg

    person_pinAriane DAVID, FIMATHO, University Hospital of Lille, France, Lille
    18:00 | O2 BIOMAT & Human Repair - Breast reconstruction using a bioabsorbable Tissue-Engineering Chamber for the regeneration of autologous adipose tissue: A Long Term pre-clinical review on minipigsJulien PAYEN, Lattice Medical
    Damien CLERET, Lattice Medical
    Pierre-Marie DANZÉ, CHU Lille Banque de Tissus et Service Chirurgie Plastique
    Pierre-Marie GUERRESCHI, CHU Lille Banque de Tissus et Service Chirurgie Plastique; Inserm UMR S 1172
    Philippe MARCHETTI, CHU Lille Banque de Tissus et Service Chirurgie Plastique; Inserm U 1008

    person_pinJulien PAYEN, Lattice Medical, Loos, France
    18:15 | O3 BIOMAT & Human Repair - Fucoidan: from brown algae to a novel radiotracer in cardiovascular imagingCédric CHAUVIERRE, Université Paris Cité, UMRS1148, INSERM
    Joël AERTS, X. Bichat Medical School, Université Paris Cité, UMS34 FRIM; AP-HP, Department of Nuclear Medicine, X. Bichat Hospital
    François ROUZET, Université Paris Cité, UMRS1148, INSERM; X. Bichat Medical School, Université Paris Cité, UMS34 FRIM; AP-HP, Department of Nuclear Medicine, X. Bichat Hospital
    Didier LETOURNEUR, Université Paris Cité, UMRS1148, INSERM
    Rein OOSTVEEN, Department of Vascular Medicine, Academic Medical Center
    Erik STROES, Department of Vascular Medicine, Academic Medical Center

    person_pinCédric CHAUVIERRE, Université Paris Cité, UMRS1148, INSERM, Paris, France
    18:30 | O4 BIOMAT & Human Repair - Bone Substitutes: from lab to bedDidier MAINARD, CHRU

    person_pinDidier MAINARD, CHRU, Nancy, France
    10:30 | KL Physical forces - New tools in magnetic tissue engineeringSYMP-04Manuela E. GOMES, University of Minho

    person_pinManuela E. GOMES, University of Minho, Guimaraes, Portugal
    11:15 | O2 Physical forces - High-throughput Generation of Soft Dissolvable Cell Microcarriers using In-air MicrofluidicsSYMP-04Luanda LINS, Leijten Lab, Dept. of Developmental BioEngineering, TechMed Centre, University of Twente, Enschede, The Netherlands
    Tom KAMPERMAN, University of Twente
    Jeroen LEIJTEN, University of Twente

    person_pinLuanda LINS, Leijten Lab, Dept. of Developmental BioEngineering, TechMed Centre, University of Twente, Enschede, The Netherlands
    11:30 | O3 Physical forces - Biological Evaluation of an In Vitro Biomimetic Platform Based on a Parallel Perfusion Bioreactor Designed to Test and Promote the Osteogenic Commitment of Cells and BiomaterialsSYMP-04Farah DAOU, Dept. of Health Sciences, Center for Translational Research on Autoimmune and Allergic Diseases (CAAD), Università del Piemonte Orientale (UPO), Novara, Italy

    person_pinFarah DAOU, Dept. of Health Sciences, Center for Translational Research on Autoimmune and Allergic Diseases (CAAD), Università del Piemonte Orientale (UPO), Novara, Italy
    11:45 | O4 Physical forces - A novel approach for vascularization in 3D in vitro adipose tissue modelsSYMP-04Francesca GRILLI, Politecnico di Milano
    Matteo PITTON, Department of Chemistry, Materials and Chemical Engineering “G. Natta”, Politecnico di Milano, Milan, Italy
    Nicola CONTESSI NEGRINI, Politecnico di Milano
    Lina ALTOMARE, Politecnico di Milano
    Silvia FARÈ, Politecnico di Milano

    person_pinMatteo PITTON, Department of Chemistry, Materials and Chemical Engineering “G. Natta”, Politecnico di Milano, Milan, Italy
    12:00 | FP01 Physical forces - Perfusable Microvessel Substitutes Integrated in a Tailored Bioreactor Enable the Investigation of Chemotaxis in vitroSYMP-04Mattis WACHENDÖRFER, Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
    Eleftheria PANTAZOGLOU, Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
    Horst FISCHER, Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany

    person_pinMattis WACHENDÖRFER, Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
    12:05 | FP02 Physical forces - Synthesis of aligned hollow polymeric microfibers by coaxial electrospinning for the development of 3D in vitro models in perfusion bioreactorsSYMP-04Marián MANTECÓN-ORIA, Departamento de Ingenierias Química y Biomolecular, Universidad de Cantabria, Santander, Spain
    María J. RIVERO, Departamento de Ingenierias Química y Biomolecular, Universidad de Cantabria, Santander, Spain
    Olga TAPIA, Universidad Europea del Atlántico (UNEATLANTICO), Santander, Spain
    Ane URTIAGA, Departamento de Ingenierias Química y Biomolecular, Universidad de Cantabria, Santander, Spain
    Nazely DIBAN, Departamento de Ingenierias Química y Biomolecular, Universidad de Cantabria, Santander, Spain

    person_pinNazely DIBAN, Departamento de Ingenierias Química y Biomolecular, Universidad de Cantabria, Santander, Spain
    12:10 | FP03 Physical forces - Photo-crosslinkable gelatin-based bio-inks as strategy towards patient-specific breast reconstructionSYMP-04Lana VAN DAMME, Polymer Chemistry & Biomaterials Group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Phillip BLONDEEL, Department of Plastic & Reconstructive Surgery, Ghent University Hospital, Corneel Heymanslaan 10, 2K12, 9000 Ghent, Belgium
    Sandra VAN VLIERBERGHE, 1. Polymer Chemistry & Biomaterials Group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Krijgslaan 281, S4-Bis, 9000 Ghent, Belgium.

    person_pinLana VAN DAMME, Polymer Chemistry & Biomaterials Group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    10:30 | KL Gene activated - Scaffold-Mediated Viral Gene Delivery for Cartilage and Osteochondral RepairSYMP-05Magali CUCCHIARINI, Center of Experimental Orthopaedics, Saarland University and Saarland University Medical Center

    person_pinMagali CUCCHIARINI, Center of Experimental Orthopaedics, Saarland University and Saarland University Medical Center, Homburg/Saar, Germany
    11:00 | O1 Gene activated - Are gelatin nanoparticles suitable non-viral vectors for the delivery of mRNA?SYMP-05Lea ANDRÉE, Department of Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboudumc, Nijmegen, The Netherlands
    Rik OUDE EGBERINK, Department of Biochemistry, Radboud Institute for Molecular Life Sciences, Radboudumc, Nijmegen, The Netherlands
    Josephine DODEMONT, Department of Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboudumc, Nijmegen, The Netherlands
    Negar HASSANI BESHELI, Department of Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboudumc, Nijmegen, The Netherlands
    Fang YANG, Department of Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboudumc, Nijmegen, The Netherlands
    Roland BROCK, Department of Biochemistry, Radboud Institute for Molecular Life Sciences, Radboudumc, Nijmegen, The Netherlands
    Sander LEEUWENBURGH, Department of Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboudumc, Nijmegen, The Netherlands

    person_pinLea ANDRÉE, Department of Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboudumc, Nijmegen, The Netherlands
    11:15 | O2 Gene activated - The activity of fucoidan/dendrimer nanoparticles regarding angiogenesis SYMP-05Filipe OLIM, CQM-Centro de Química da Madeira, University of Madeira, Campus da Penteada, 9020-105 Funchal, Portugal
    Ana RUTE NEVES, CQM-Centro de Química da Madeira, University of Madeira, Campus da Penteada, 9020-105 Funchal, Portugal
    Irene RODRIGUEZ-CLEMENTE, Unidad Asociada Neurodeath, School of Medicine, University of Castilla-La Mancha, 02006 Albacete, Spain
    Valentín CEÑA, Unidad Asociada Neurodeath, School of Medicine, University of Castilla-La Mancha, 02006 Albacete, Spain
    Helena TOMÁS, CQM-Centro de Química da Madeira, University of Madeira, Campus da Penteada, 9020-105 Funchal, Portugal

    person_pinFilipe OLIM, CQM-Centro de Química da Madeira, University of Madeira, Campus da Penteada, 9020-105 Funchal, Portugal
    11:30 | O3 Gene activated - Toward an innovative cement formulation combining calcium phosphate and lipid-oligonucleotide to address bacterial resistanceSYMP-05Clémentine AUBRY, ARNA/Inserm U1212, CNRS 5320, University of Bordeaux, Bordeaux, France
    Christèle COMBES, CIRIMAT, Université de Toulouse, CNRS, Toulouse INP, Toulouse, France
    Christophe DROUET, CIRIMAT, Université de Toulouse, CNRS, Toulouse INP, Toulouse, France
    Corinne ARPIN, MFP/CNRS 5234, University of Bordeaux, Bordeaux, France
    Tina KAUSS, ARNA/Inserm U1212, CNRS 5320, University of Bordeaux, Bordeaux, France
    Philippe BARTHÉLÉMY, ARNA/Inserm U1212, CNRS 5320, University of Bordeaux, Bordeaux, France

    person_pinClémentine AUBRY, ARNA/Inserm U1212, CNRS 5320, University of Bordeaux, Bordeaux, France
    11:45 | O4 Gene activated - Novel cancer gene-therapy carriers based on the recombinant fusion of polycationic Elastin-Like Polymers and single-chain variable antibody fragmentsSYMP-05Sara ESCALERA-ANZOLA, Smart Biodevices for Nanomedicine, University of Valladolid, Edificio LUCIA, Valladolid, Spain
    Sofía SERRANO-DÚCAR, Smart Biodevices for Nanomedicine, University of Valladolid, Edificio LUCIA, Valladolid, Spain / Unit of Excellence Institute of Biology and Molecular Genetics (IBGM), University of Valladolid-CSIC
    Raquel MUÑOZ, Smart Biodevices for Nanomedicine, University of Valladolid, Edificio LUCIA, Valladolid, Spain / Unit of Excellence Institute of Biology and Molecular Genetics (IBGM), University of Valladolid-CSIC
    Alessandra GIROTTI, Smart Biodevices for Nanomedicine, University of Valladolid, Edificio LUCIA, Valladolid, Spain / Unit of Excellence Institute of Biology and Molecular Genetics (IBGM), University of Valladolid-CSIC
    Francisco Javier ARIAS, Smart Biodevices for Nanomedicine, University of Valladolid, Edificio LUCIA, Valladolid, Spain / Unit of Excellence Institute of Biology and Molecular Genetics (IBGM), University of Valladolid-CSIC

    person_pinSara ESCALERA-ANZOLA, Smart Biodevices for Nanomedicine, University of Valladolid, Edificio LUCIA, Valladolid, Spain
    12:00 | FP01 Gene activated - Decellularisation of whole human condyles for osteochondral repairSYMP-05Halina NORBERTCZAK, School of Biomedical Sciences, Faculty of Biological Sciences, University of Leeds, Leeds, United Kingdom
    Eileen INGHAM, School of Biomedical Sciences, Faculty of Biological Sciences, University of Leeds, Leeds, United Kingdom
    Jennifer EDWARDS, School of Biomedical Sciences, Faculty of Biological Sciences, University of Leeds, Leeds, United Kingdom
    Paul ROONEY, NHS Blood and Transplant Tissue and Eye Services, Liverpool, United Kingdom
    Hazel FERMOR, School of Biomedical Sciences, Faculty of Biological Sciences, University of Leeds, Leeds, United Kingdom

    person_pinHazel FERMOR, School of Biomedical Sciences, Faculty of Biological Sciences, University of Leeds, Leeds, United Kingdom
    12:05 | FP02 Gene activated - Bone Regeneration with Antibiotic Delivery – A New Approach to Osteomyelitis and Infected Joint ReplacementsSYMP-05Eoin BARRETT, Royal College of Surgeons in Ireland
    Helena KELLY, Royal College of Surgeons in Ireland
    Robert FLAVIN, St. Vincent's Private Hospital, Dublin, Ireland
    Gerard INSLEY, PBC Biomed
    Ciara MURPHY, Anatomy and Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland

    person_pinGerard INSLEY, PBC Biomed
    10:30 | KL Electroactive - Soft Electronics as Interfaces to Living TissuesSYMP-06John A. ROGERS, Department of Materials Science and Engineering and Biomedical Engineering, Northwestern University

    person_pinJohn A. ROGERS, Department of Materials Science and Engineering and Biomedical Engineering, Northwestern University, Evanston, USA
    11:00 | O1 Electroactive - Biomimetic Electroconductive PEDOT Nanoparticle Scaffold for Spinal Cord Injury RepairSYMP-06Aleksandra SERAFIN, Bernal Institute, School of Engineering, University of Limerick, Ireland
    Mario CULEBRAS RUBIO, University of Valencia
    Miguel OLIVEIRA, University of Minho
    Maurice N. COLLINS, University of Minho

    person_pinAleksandra SERAFIN, Bernal Institute, School of Engineering, University of Limerick, Ireland
    11:15 | O2 Electroactive - Dissolution Behaviour and Biocompatibility of Combinatorially Sputtered SiFeCN Coatings for Spinal ImplantsSYMP-06Estefanía ECHEVERRI, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    Charlotte SKJÖLDEBRAND, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    Gry HULSART-BILLSTRÖM, Department of Medicinal Chemistry, Uppsala University, Uppsala, Sweden
    Cecilia PERSSON, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden

    person_pinEstefanía ECHEVERRI, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    11:30 | O3 Electroactive - Collagen/Pristine Graphene as an Electroconductive Interface Material for Neuronal Medical Device ApplicationsSYMP-06Jack MAUGHAN, Chemical Physics of Low Dimensional Nanostructures Group, School of Physics, Trinity College Dublin & Tissue Engineering Research Group, Royal College of Surgeons in Ireland
    Pedro J. GOUVEIA, Tissue Engineering Research Group, Royal College of Surgeons in Ireland
    Jonathan N. COLEMAN, Chemical Physics of Low Dimensional Nanostructures Group, School of Physics, Trinity College Dublin
    Fergal J. O' BRIEN, Tissue Engineering Research Group, Royal College of Surgeons in Ireland

    person_pinJack MAUGHAN, Chemical Physics of Low Dimensional Nanostructures Group, School of Physics, Trinity College Dublin & Tissue Engineering Research Group, Royal College of Surgeons in Ireland
    11:45 | O4 Electroactive - Bioelectronics to study and regenerate boneSYMP-06Donata IANDOLO, INSERM, U1059 Sainbiose, Université Jean Monnet, Saint-Étienne, FR.
    Darius WIDERA, School of Pharmacy, University of Reading, UK;
    Róisín M. OWENS, Department of Chemical Engineering and Biotechnology, University of Cambridge, UK

    person_pinDonata IANDOLO, INSERM, U1059 Sainbiose, Université Jean Monnet, Saint-Étienne, FR.
    12:00 | FP01 Electroactive - Nutlin-loaded ultrasound-activated piezoelectric nanovectors: Modulation of anti-angiogenic activitySYMP-06Ozlem SEN, Istituto Italiano di Tecnologia, Smart Bio-Interfaces, Viale Rinaldo Piaggio 34, 56025 Pontedera, Italy
    Attilio MARINO, Istituto Italiano di Tecnologia
    Carlotta PUCCI, Istituto Italiano di Tecnologia
    Gianni CIOFANI, Istituto Italiano di Tecnologia

    person_pinOzlem SEN, Istituto Italiano di Tecnologia, Smart Bio-Interfaces, Viale Rinaldo Piaggio 34, 56025 Pontedera, Italy
    12:05 | FP02 Electroactive - Design of a fully-resorbable electronic device for neural stimulation and monitoringSYMP-06Simon RÉGAL, CEA Grenoble, LETI-Clinatec et LETI-DTBS
    Maxime LEPRINCE, CEA Grenoble, LETI-DTBS et CERMAV
    Pascal MAILLEY, CEA Grenoble, LETI-DTBS
    Napoleon TORRES-MARTINEZ, CEA Grenoble, LETI-Clinatec
    David RATEL, CEA Grenoble, LETI-Clinatec
    Fabien SAUTER, CEA Grenoble, LETI-Clinatec
    Rachel AUZÉLY, CNRS, CERMAV
    Isabelle TEXIER, University Grenoble Alpes, CEA, LETI-DTBS, F-38000 Grenoble, France

    person_pinIsabelle TEXIER, University Grenoble Alpes, CEA, LETI-DTBS, F-38000 Grenoble, France
    12:10 | FP03 Electroactive - A Closed-Loop Soft Robotic Drug Delivery System to Overcome the Foreign Body ResponseSYMP-06Lucien H.J. SCHREIBER, Anatomy and Regenerative Medicine Institute (REMEDI), School of Medicine, NUI Galway, Galway, Ireland.
    Rachel BEATTY, Anatomy and Regenerative Medicine Institute (REMEDI), School of Medicine, NUI Galway, Galway, Ireland; SFI Centre for Advanced Materials and BioEngineering Research (AMBER), Trinity College Dublin, Dublin, Ireland.
    Keegan L. MENDEZ, Harvard-MIT Program in Health Sciences and Technology, Cambridge, MA, USA.
    William WHYTE, Institute for Medical Engineering and Science, Massachusetts Institute of Technology, Cambridge, MA, USA.
    Yiling FAN, Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
    Scott T. ROBINSON, Anatomy and Regenerative Medicine Institute (REMEDI), School of Medicine, NUI Galway, Galway, Ireland; SFI Centre for Advanced Materials and BioEngineering Research (AMBER), Trinity College Dublin, Dublin, Ireland.
    Andrew J. SIMPKIN, School of Mathematics, Statistics and Applied Mathematics, NUI Galway, Galway, Ireland
    Ellen T. ROCHE, Harvard-MIT Program in Health Sciences and Technology, Cambridge, MA, USA; Institute for Medical Engineering and Science, Massachusetts Institute of Technology, Cambridge, MA, USA; Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
    Eimear B. DOLAN, Department of Biomedical Engineering, NUI Galway, Galway, Ireland
    Garry P. DUFFY, Anatomy and Regenerative Medicine Institute (REMEDI), School of Medicine, NUI Galway, Galway, Ireland; SFI Centre for Advanced Materials and BioEngineering Research (AMBER), Trinity College Dublin, Dublin, Ireland.

    person_pinLucien H.J. SCHREIBER, Anatomy and Regenerative Medicine Institute (REMEDI), School of Medicine, NUI Galway, Galway, Ireland.
    10:30 | KL OoO - Biomaterials, Organoids And Microfluidics: A Winning Trio For Organ-On-ChipsSYMP-07Audrey FERRAND, Team ‘Environment and Intestinal Epithelium’, Institut de Recherche en Santé Digestive (IRSD)

    person_pinAudrey FERRAND, Team ‘Environment and Intestinal Epithelium’, Institut de Recherche en Santé Digestive (IRSD), Toulouse, France
    11:00 | O1 - Using Collagen Microfibers to Unlock in vitro Vascularized Mature Adipose Tissue Regeneration: Applications to Patients-derived Drug-screening Models and Breast ReconstructionSYMP-07Fiona LOUIS, Joint Research Laboratory (TOPPAN) for Advanced Cell Regulatory Chemistry, Graduate School of Engineering, Osaka University, Japan.
    Yoshihiro SOWA, Department of Plastic and Reconstructive Surgery, Graduate School of Medical Sciences, Kyoto Prefectural University of Medicine, Japan.
    Shiro Kitano KITANO, Joint Research Laboratory (TOPPAN) for Advanced Cell Regulatory Chemistry, Graduate School of Engineering, Osaka University, Japan.
    Michiya MATSUSAKI, Joint Research Laboratory (TOPPAN) for Advanced Cell Regulatory Chemistry, Graduate School of Engineering, Osaka University, Japan.

    person_pinFiona LOUIS, Joint Research Laboratory (TOPPAN) for Advanced Cell Regulatory Chemistry, Graduate School of Engineering, Osaka University, Japan.
    11:15 | O2 - 3D Bioprinted Glioblastoma MicroenvironmentSYMP-07Jessica SENIOR, University of Huddersfield, UK
    Anke BRUNING-RICHARDSON, University of Huddersfield, UK
    Alan SMITH, University of Huddersfield, UK

    person_pinJessica SENIOR, University of Huddersfield, UK
    11:30 | O3 - Stratified Living Units for Modeling Pancreatic Tumor-Stroma MicroenvironmentSYMP-07Maria MONTEIRO, CICECO‐Aveiro Institute of Materials, Aveiro University, Aveiro, Portugal
    Vítor GASPAR, CICECO – Aveiro Institute of Materials, University of Aveiro
    João MANO, CICECO – Aveiro Institute of Materials, University of Aveiro

    person_pinMaria MONTEIRO, CICECO‐Aveiro Institute of Materials, Aveiro University, Aveiro, Portugal
    11:45 | O4 - In vitro alveolar-capillary barrier model for the study of particulate matter toxicitySYMP-07Chiara Emma CAMPIGLIO, Department of Management, Information and Production Engineering, University of Bergamo, Dalmine (BG), Italy
    Andrea REMUZZI, Department of Management, Information and Production Engineering, University of Bergamo, Dalmine (BG), Italy

    person_pinChiara Emma CAMPIGLIO, Department of Management, Information and Production Engineering, University of Bergamo, Dalmine (BG), Italy
    12:00 | FP01 OoO - Cabbage leaves as 3D platform for in vitro adipose tissue modelSYMP-07Maddalena BRACCHI, Politecnico di Milano
    Andrea FIORATI, Politecnico di Milano
    Lina ALTOMARE, Dipartimento di Chimica, Materiali, Ing. Chimica ‘G Natta’ Politecnico di Milano, Milan, Italy

    person_pinLina ALTOMARE, Dipartimento di Chimica, Materiali, Ing. Chimica ‘G Natta’ Politecnico di Milano, Milan, Italy
    12:05 | FP02 OoO - Organ-on-a-chip to evaluate biomaterialsSYMP-07Oscar CASTANO LINARES, University of Barcelona (UB), Barcelona, Spain; Institute for Bioengineering of Catalonia (IBEC), Barcelona, Spain; CIBER en Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, Madrid, Spain
    Adrian LOPEZ CANOSA, Institute for Bioengineering of Catalonia (UB)
    Ines SOUSA PEREIRA, Institute for Bioengineering of Catalonia (UB)
    Anna VILCHE MARISCAL, University of Barcelona (UB)
    Ana PASCUAL SEGURA, University of Barcelona (UB)
    Josep FERRE TORRES, University of Barcelona (UB)
    Adrià NOGUERA MONTEAGUDO, University of Barcelona (UB)
    Eduardo YANAC HUERTAS, University of Barcelona (UB)
    Soledad PEREZ-AMODIO, Institute for Bioengineering of Catalonia (UB)
    Romen RODRIGUEZ TRUJILLO, University of Barcelona (UB)
    Aurora HERNANDEZ MACHADO, University of Barcelona (UB)
    Josep SAMITIER, Institute for Bioengineering of Catalonia (UB)
    Elisabeth ENGEL LOPEZ, Polytechnical University of Catalonia (UPC)

    person_pinOscar CASTANO LINARES, University of Barcelona (UB), Barcelona, Spain; Institute for Bioengineering of Catalonia (IBEC), Barcelona, Spain; CIBER en Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, Madrid, Spain
    12:10 | FP03 OoO - Development of optically-tuned bioresins for the rapid volumetric bioprinting of liver organoid-laden metabolic biofactoriesSYMP-07Paulina NÚÑEZ BERNAL, Department of Orthopedics, UMC Utrecht, Utrecht, the Netherlands
    Manon BOUWMEESTER, Department of Clinical Sciences, Faculty of Veterinary Medicine
    Jorge MADRID-WOLFF, Laboratory of Applied Photonics Devices, École Polytechnique Fédéral Lausanne (EPFL)
    Marc FALANDT, Department of Clinical Sciences, Faculty of Veterinary Medicine
    Sammy FLORCZAK, Department of Orthopaedics, University Medical Center Utrecht
    Núria GINÉS RODRIGUEZ, Department of Orthopaedics, University Medical Center Utrecht
    Yang LI, Department of Orthopaedics, University Medical Center Utrecht
    Gabriel GRÖßBACHER, Department of Orthopaedics, University Medical Center Utrecht
    Roos-Anne SAMSOM, Department of Clinical Sciences, Faculty of Veterinary Medicine
    Monique VAN WOLFEREN, Department of Clinical Sciences, Faculty of Veterinary Medicine
    Luc VAN DER LAAN, Department of Surgery, Erasmus MC-University Medical Center
    Paul DELROT, Readily3D SA
    Damien LOTERIE, Readily3D SA
    Jos MALDA, Department of Orthopaedics, University Medical Center Utrecht; Department of Clinical Sciences, Faculty of Veterinary Medicine
    Christophe MOSER, Laboratory of Applied Photonics Devices, École Polytechnique Fédéral Lausanne (EPFL)
    Bart SPEE, Department of Clinical Sciences, Faculty of Veterinary Medicine
    Riccardo LEVATO, Department of Clinical Sciences, Faculty of Veterinary Medicine; Department of Orthopaedics, University Medical Center Utrecht

    person_pinMarc FALANDT, Department of Clinical Sciences, Faculty of Veterinary Medicine
    12:15 | FP04 OoO - sciPULSE ULTRA LOW VOLUME - Dispensing of small droplets in the range of 18 -180 pLSYMP-07Dietrich KOESTER, SCIENION GmbH, Berlin, Germany
    Beatrix ROEHRDANZ, SCIENION GmbH, Berlin, Germany

    person_pinDietrich KOESTER, SCIENION GmbH, Berlin, Germany
    10:30 | KL1 Supramolecular - b-sheet peptide based supramolecular scaffolds: from design to applicationSYMP-08Alberto SAIANI, Department of Materials, University of Manchester, Manchester, United Kingdom

    person_pinAlberto SAIANI, Department of Materials, University of Manchester, Manchester, United Kingdom
    11:00 | O1 Supramolecular - Heparin-Guided Binding of VEGF to Supramolecular Biomaterial Surfaces to Create Dual-Functionalized Hemocompatible Devices SYMP-08Dina IBRAHIM, Eindhoven University of Technology, Eindhoven, The Netherlands
    Moniek SCHMITZ, Eindhoven University of Technology, Eindhoven, The Netherlands
    Paul BARTELS, Eindhoven University of Technology, Eindhoven, The Netherlands
    Simone TWISK, Eindhoven University of Technology, Eindhoven, The Netherlands
    Anthal SMITS, Eindhoven University of Technology, Eindhoven, The Netherlands
    Carlijn BOUTEN, Eindhoven University of Technology, Eindhoven, The Netherlands
    Patricia DANKERS, Eindhoven University of Technology, Eindhoven, The Netherlands

    person_pinDina IBRAHIM, Eindhoven University of Technology, Eindhoven, The Netherlands
    11:15 | O2 Supramolecular - Biodegradable dendrimers for mRNA therapeutics: crossing the BBB of the ischemic brainSYMP-08Marília TORRADO, i3S/INEB - Institute for Research and Innovation in Health/Institute of Biomedical Engineering, University of Porto, Porto, Portugal; ICBAS - Abel Salazar Biomedical Sciences Institute, University of Porto, Porto, Portugal
    Victoria LEIRO, i3S/INEB - Institute for Research and Innovation in Health/Institute of Biomedical Engineering, University of Porto, Porto, Portugal
    Sofia DUQUE SANTOS, i3S/INEB - Institute for Research and Innovation in Health/Institute of Biomedical Engineering, University of Porto, Porto, Portugal
    Ana Paula PÊGO, i3S/INEB - Institute for Research and Innovation in Health/Institute of Biomedical Engineering, University of Porto, Porto, Portugal; ICBAS - Abel Salazar Biomedical Sciences Institute, University of Porto, Porto, Portugal

    person_pinMarília TORRADO, i3S/INEB - Institute for Research and Innovation in Health/Institute of Biomedical Engineering, University of Porto, Porto, Portugal; ICBAS - Abel Salazar Biomedical Sciences Institute, University of Porto, Porto, Portugal
    11:30 | O3 Supramolecular - Hybrid supramolecular and photoresponsive gelatin hydrogels as dynamic cell culture matrices and volumetrically printable bioresinsSYMP-08Marc FALANDT, Dept. of Clinical Sciences, Faculty of Veterinary Medicine, Utrecht University, The Netherlands
    Paulina NUNEZ BERNAL, Dept. of Orthopaedics, University Medical Center Utrecht, Utrecht University
    Klement WIDMANN, Dept. of Orthopaedics, University Medical Center Utrecht, Utrecht University
    Marisa ASSUNÇÃO, Dept. of Orthopaedics, University Medical Center Utrecht, Utrecht University
    Jos MALDA, Dept. of Orthopaedics, University Medical Center Utrecht, Utrecht University; Dept. of Clinical Sciences, Faculty of Veterinary Medicine, Utrecht University
    Tina VERMONDEN, Dept. of Pharmaceutics, Faculty of Science, Utrecht University
    Riccardo LEVATO, Dept. of Clinical Sciences, Faculty of Veterinary Medicine, Utrecht University; Dept. of Orthopaedics, University Medical Center Utrecht, Utrecht University

    person_pinMarc FALANDT, Dept. of Clinical Sciences, Faculty of Veterinary Medicine, Utrecht University, The Netherlands
    11:45 | O4 Supramolecular - Corneal endothelial tissue engineering using smart, multi-layered polymer sheetsSYMP-08Jasper DELAEY, Polymer Chemistry & Biomaterials group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Jasper VAN HOORICK, Polymer Chemistry & Biomaterials group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent (Belgium)
    Bert VAN DEN BOGERD, Department of Ophthalmology, Visual Optics and Visual Rehabilitation, Faculty of Medicine and Health Sciences, University of Antwerp, Wilrijk (Belgium)
    Lincy PYL, Department of Mechanics of materials and constructions, Vrije Universiteit Brussel, Brussels, Belgium
    Joost BRANCART, Physical Chemistry and Polymer Science (FYSC), Vrije Univeristeit Brussel, Brussels, Belgium
    Carina KOPPEN, Department of Ophthalmology, Visual Optics and Visual Rehabilitation, Faculty of Medicine and Health Sciences, University of Antwerp, Wilrijk (Belgium)
    Peter DUBRUEL, Polymer Chemistry & Biomaterials group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Sandra VAN VLIERBERGHE, Polymer Chemistry & Biomaterials group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium

    person_pinJasper DELAEY, Polymer Chemistry & Biomaterials group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    12:10 | FP01 Supramolecular - Dual-crosslinked degradable elastomer with self-healing propertiesSYMP-08Mathilde GROSJEAN, Department of Polymers for Health and Biomaterials, IBMM, University of Montpellier, Montpellier, France
    Louis GANGOLPHE, Polymers for Health and Biomaterials - IBMM - Univ Montpellier, LRP - Grenoble INP - Univ Grenoble Alpes
    Frédéric BOSSARD, LRP - Grenoble INP - Univ Grenoble Alpes
    Xavier GARRIC, Polymers for Health and Biomaterials - IBMM - Univ Montpellier
    Benjamin NOTTELET, Polymers for Health and Biomaterials - IBMM - Univ Montpellier

    person_pinMathilde GROSJEAN, Department of Polymers for Health and Biomaterials, IBMM, University of Montpellier, Montpellier, France
    10:30 | KL in situ monitoring - QCM-D as a powerful tool to design and evaluate BiomaterialsTech S3Erik NILEBÄCK, Biolin Scientific AB

    person_pinErik NILEBÄCK, Biolin Scientific AB, Västra Frölunda, Sweden
    10:45 | O1 In situ monitoring - Real-Time Monitoring and Optimization of Hydrogel Photocrosslinking in Volumetric PrintingTech S3Sammy FLORCZAK, Department of Orthopedics, UMC Utrecht, Utrecht, the Netherlands
    Davide RIBEZZI, Department of Orthopedics, UMC Utrecht, Utrecht, the Netherlands
    Jos MALDA, Department of Orthopedics, UMC Utrecht, Utrecht, the Netherlands, AND, Department of Clinical Sciences, Faculty of Veterinary Medicine, Utrecht University, Utrecht, the Netherlands
    Riccardo LEVATO, Department of Orthopedics, UMC Utrecht, Utrecht, the Netherlands, AND, Department of Clinical Sciences, Faculty of Veterinary Medicine, Utrecht University, Utrecht, the Netherlands

    person_pinSammy FLORCZAK, Department of Orthopedics, UMC Utrecht, Utrecht, the Netherlands
    11:00 | O2 In situ monitoring - Sono-responsive Hybrid TiO2/Polymer Nanomaterials for Actively Targeted Sonodynamic Therapy of Cancer Tech S3Ivan ZLOTVER, Department of Material Science and Engineering, Technion – Israel Institute of Technology, Haifa, Israel
    Alejandro SOSNIK, Department of Material Science and Engineering, Technion – Israel Institute of Technology

    person_pinIvan ZLOTVER, Department of Material Science and Engineering, Technion – Israel Institute of Technology, Haifa, Israel
    11:15 | O3 In situ monitoring - Bio-impedance and Microscopy Monitoring of Spheroid Inside a Microfluidic Device for Electro-Chemotherapy ApplicationsTech S3Pauline BREGIGEON, Univ Lyon, Ecole Centrale de Lyon, INSA Lyon, Université Claude Bernard Lyon 1, CNRS, Ampère, UMR5005, 69130 Ecully, France
    Théo LE BERRE, Univ Lyon, Ecole Centrale de Lyon, INSA Lyon, Université Claude Bernard Lyon 1, CNRS, Ampère, UMR5005, 69130 Ecully, France
    Charlotte RIVIERE, Univ Lyon, Université Claude Bernard Lyon 1, CNRS, Institut Lumière Matière, F-69622, Villeurbanne, France; Institut Universitaire de France (IUF), France
    Laure FRANQUEVILLE, Univ Lyon, Ecole Centrale de Lyon, INSA Lyon, Université Claude Bernard Lyon 1, CNRS, Ampère, UMR5005, 69130 Ecully, France
    Christian VOLLAIRE, Univ Lyon, Ecole Centrale de Lyon, INSA Lyon, Université Claude Bernard Lyon 1, CNRS, Ampère, UMR5005, 69130 Ecully, France
    Julien MARCHALOT, Univ Lyon, Ecole Centrale de Lyon, INSA Lyon, Université Claude Bernard Lyon 1, CNRS, Ampère, UMR5005, 69130 Ecully, France
    Marie FRENEA-ROBIN, Univ Lyon, Ecole Centrale de Lyon, INSA Lyon, Université Claude Bernard Lyon 1, CNRS, Ampère, UMR5005, 69130 Ecully, France

    person_pinPauline BREGIGEON, Univ Lyon, Ecole Centrale de Lyon, INSA Lyon, Université Claude Bernard Lyon 1, CNRS, Ampère, UMR5005, 69130 Ecully, France
    11:30 | KL1 Production methods - Influence of Endotoxin on Cellular ActivityTech S4Jos OLIJVE, Rousselot Biomedical, Meulestedekaai 81, 9000 Gent, Belgium
    Elien GEVAERT, Rousselot Biomedical
    Bjorn VERGAUWEN, Rousselot Biomedical
    Catarina FERREIRA DA SILVA, Rousselot Biomedical

    person_pinJos OLIJVE, Rousselot Biomedical, Meulestedekaai 81, 9000 Gent, Belgium
    12:00 | KL2 Production methods - Gelatin: From Biomaterial to BIO INKTech S4Jasper VAN HOORICK, BIO INX
    Agnes DOBOS, BIO INX

    person_pinAgnes DOBOS, BIO INX, Ghent, Belgium
    12:15 | O1 Production methods - Cellularized MPL-produced microscaffolds as building blocks for cartilage defects repair.Tech S4Olivier GUILLAUME, 3D Printing and Biofabrication Group, Institute of Materials Science and Technology, TU Wien, Vienna, Austria
    Oliver KOPINSKI-GRÜNWALD, 3D Printing and Biofabrication Group, Institute of Materials Science and Technology, TU Wien, Vienna, Austria
    Sandra VAN VLIERBERGHE, Polymer Chemistry & Biomaterials Group, Centre of Macromolecular Chemistry, Department of Organic and Macromolecular Chemistry, Ghent University, Belgium
    Aleksandr OVSIANIKOV, 3D Printing and Biofabrication Group, Institute of Materials Science and Technology, TU Wien, Vienna, Austria

    person_pinOlivier GUILLAUME, 3D Printing and Biofabrication Group, Institute of Materials Science and Technology, TU Wien, Vienna, Austria
    15:30 | O1 Antimicrobial - Chitosan-DEAE Nanoparticles for the Development of Antipneumococcal TherapeuticsPSOP-08Vazquez ROBERTO , Microbial and Plant Biotechnology Department, Centro de Investigaciones Biologicas Margarita Salas (CIB-CSIC), Madrid, Spain; Centro de Investigacion Biomedica en Red de Enfermedades Respiratorias (CIBERES), Madrid, Spain
    Francisco Javier CARO-LEON, Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC), Madrid, Spain; Biopolymers Research Group, Centro de Investigacion en Alimentacion y Desarrollo A. C., Hermosillo, Mexico
    Nakal-Chidiac ALBERTO, Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC), Madrid, Spain
    Susana RUIZ, Microbial and Plant Biotechnology Department, Centro de Investigaciones Biol´ogicas Margarita Salas (CIB-CSIC), Madrid, Spain; Centro de Investigacion Biomedica en Red de Enfermedades Respiratorias (CIBERES), Madrid, Spain
    Carmen DOÑORO, Animal Cell Culture Facility, Centro de Investigaciones Biologicas Margarita Salas (CIB-CSIC), Madrid, Spain
    Luis GARCIA-FERNANDEZ, Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC), Madrid, Spain
    Blanca VAZQUEZ-LASA, Instituto de Ciencia y Tecnologia de Polimeros (ICTP-CSIC), Madrid, Spain; Centro de Investigacion Biomedica en Red de Bioingeniería, Biomateriales, y Nanomedicina (CIBER-BBN), Madrid, Spain; Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy (SUSPLAST), Madrid, Spain
    Julio SAN ROMAN, Instituto de Ciencia y Tecnologia de Polimeros (ICTP-CSIC), Madrid, Spain;
    Jesus SANZ, Microbial and Plant Biotechnology Department, Centro de Investigaciones Biologicas Margarita Salas (CIB-CSIC), Madrid, Spain; Centro de Investigacion Biomedica en Red de Enfermedades Respiratorias (CIBERES), Madrid, Spain
    Pedro GARCIA, Microbial and Plant Biotechnology Department, Centro de Investigaciones Biologicas Margarita Salas (CIB-CSIC), Madrid, Spain; Centro de Investigacion Biomedica en Red de Enfermedades Respiratorias (CIBERES), Madrid, Spain
    María Rosa AGUILAR DE ARMAS, Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC), Madrid, Spain; Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales, y Nanomedicina (CIBER-BBN), Madrid, Spain

    person_pinMaría Rosa AGUILAR DE ARMAS, Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC), Madrid, Spain; Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales, y Nanomedicina (CIBER-BBN), Madrid, Spain
    15:45 | O2 Antimicrobial - Evaluation of the Staphylococcus Aureus Bacteriophages Lytic Activity Depending on the Biopolymer CarrierPSOP-08Liga STIPNIECE, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre, Riga Technical University, Riga, Latvia; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia
    Dace REZEVSKA, Department of Biology and Microbiology, Riga Stradins University, Riga, Latvia
    Dagnija LOCA, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre, Riga Technical University, Riga, Latvia; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia

    person_pinLiga STIPNIECE, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre, Riga Technical University, Riga, Latvia; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia
    16:00 | O3 Antimicrobial - Antibiotic-free Collagen-Hydroxyapatite Scaffolds Reinforced with 3D Printing to Treat Infection and Support Bone Regeneration in Load-Bearing DefectsPSOP-08Katelyn GENOUD, Tissue Engineering Research Group (TERG), RCSI University of Medicine and Health Sciences, Dublin, Ireland
    Joanna SADOWSKA, 1. Tissue Engineering Research Group (TERG), RCSI University of Medicine and Health Sciences, Ireland. 3. Advanced Materials and Biomedical Engineering Research (AMBER) Centre, Dublin, Ireland.
    Rachael POWER, 1. Tissue Engineering Research Group (TERG), RCSI University of Medicine and Health Sciences, Ireland. 3. Advanced Materials and Biomedical Engineering Research (AMBER) Centre, Dublin, Ireland.
    Lara COSTARD, 1. Tissue Engineering Research Group (TERG), RCSI University of Medicine and Health Sciences, Ireland. 3. Advanced Materials and Biomedical Engineering Research (AMBER) Centre, Dublin, Ireland.
    Mark LEMOINE, 1. Tissue Engineering Research Group (TERG), RCSI University of Medicine and Health Sciences, Ireland. 2. Trinity Centre for Biomedical Engineering, Trinity College Dublin, Ireland. 3. Advanced Materials and Biomedical Engineering Research (AMBER) Centre, Dublin, Ireland.
    Emily RYAN, 1. Tissue Engineering Research Group (TERG), RCSI University of Medicine and Health Sciences, Ireland. 3. Advanced Materials and Biomedical Engineering Research (AMBER) Centre, Dublin, Ireland.
    Gang CHEN, 4. Department of Physiology and Medical Physics, RCSI, Dublin, Ireland
    Daniel KELLY, 1. Tissue Engineering Research Group (TERG), RCSI University of Medicine and Health Sciences, Ireland. 2. Trinity Centre for Biomedical Engineering, Trinity College Dublin, Ireland. 3. Advanced Materials and Biomedical Engineering Research (AMBER) Centre, Dublin, Ireland.
    Fergal O'BRIEN, 1. Tissue Engineering Research Group (TERG), RCSI University of Medicine and Health Sciences, Ireland. 2. Trinity Centre for Biomedical Engineering, Trinity College Dublin, Ireland. 3. Advanced Materials and Biomedical Engineering Research (AMBER) Centre, Dublin, Ireland.

    person_pinKatelyn GENOUD, Tissue Engineering Research Group (TERG), RCSI University of Medicine and Health Sciences, Dublin, Ireland
    16:15 | O4 Antimicrobial - Biological characterization of antibacterial Ag-doped calcium titanate layer on titanium implantsPSOP-08David PIÑERA AVELLANEDA, Biomaterials, Biomechanics and Tissue Engineering Group, Department of Materials Science and Engineering, Technical University of Catalonia (UPC), Barcelona East School of Engineering (EEBE), 08019, Barcelona, Spain
    Judit BUXADERA PALOMERO, Universitat Politècnica de Catalunya
    José María MANERO, Universitat Politècnica de Catalunya
    Elisa RUPÉREZ, Universitat Politècnica de Catalunya

    person_pinDavid PIÑERA AVELLANEDA, Biomaterials, Biomechanics and Tissue Engineering Group, Department of Materials Science and Engineering, Technical University of Catalonia (UPC), Barcelona East School of Engineering (EEBE), 08019, Barcelona, Spain
    15:30 | O1 Nanobiomaterials - 3D-printed Plasmonic Scaffolds for SERS Sensing and Imaging of Cancer ModelsPSOP-09Clara GARCIA-ASTRAIN, CIC biomaGUNE, Basque Research and Technology Alliance (BRTA), 20014 Donostia-San Sebastián, Spain; Centro de Investigación Biomédica en Red de Bioingeniería Biomateriales, y Nanomedicina (CIBER-BBN), 20014 Donostia-San Sebastián, Spain
    Malou HENRIKSEN-LACEY, CIC biomaGUNE, Basque Research and Technology Alliance (BRTA)/Centro de Investigación Biomédica en Red de Bioingeniería Biomateriales, y Nanomedicina (CIBER-BBN)
    Beatriz MOLINA, CIC biomaGUNE, Basque Research and Technology Alliance (BRTA)
    Elisa LENZI, CIC biomaGUNE, Basque Research and Technology Alliance (BRTA)
    Judith LANGER, CIC biomaGUNE, Basque Research and Technology Alliance (BRTA)
    Dorleta JIMENEZ DE ABERASTURI, CIC biomaGUNE, Basque Research and Technology Alliance (BRTA)/Centro de Investigación Biomédica en Red de Bioingeniería Biomateriales, y Nanomedicina (CIBER-BBN)/Ikerbasque Basque Foundation for Science
    Luis M LIZ-MARZÁN, CIC biomaGUNE, Basque Research and Technology Alliance (BRTA)/Centro de Investigación Biomédica en Red de Bioingeniería Biomateriales, y Nanomedicina (CIBER-BBN)/Ikerbasque Basque Foundation for Science

    person_pinClara GARCIA-ASTRAIN, CIC biomaGUNE, Basque Research and Technology Alliance (BRTA), 20014 Donostia-San Sebastián, Spain; Centro de Investigación Biomédica en Red de Bioingeniería Biomateriales, y Nanomedicina (CIBER-BBN), 20014 Donostia-San Sebastián, Spain
    15:45 | O2 Nanobiomaterials - Surface-functionalized nanomedicines with FcRn-targeted ligands for intestinal delivery of semaglutidePSOP-09Soraia PINTO, Instituto de Investigação e Inovação em Saúde (i3S), University of Porto, Porto, Portugal; Instituto de Ciências Biomédicas Abel Salazar (ICBAS), University of Porto, Porto, Portugal
    Hélder SANTOS, Department of Biomedical Engineering, University Medical Center Groningen
    Bruno SARMENTO, i3S and CESPU

    person_pinSoraia PINTO, Instituto de Investigação e Inovação em Saúde (i3S), University of Porto, Porto, Portugal; Instituto de Ciências Biomédicas Abel Salazar (ICBAS), University of Porto, Porto, Portugal
    16:00 | O3 Nanobiomaterials - General features of metal sulfide biomineralization in microorganisms and particularity in intracellular biomineralization of copper sulfidePSOP-09Yeseul PARK, Aix-Marseille Université, CEA, CNRS, BIAM, 13108 Saint Paul lez Durance, France
    Zohar EYAL, Department of Plant and Environmental Sciences, Weizmann Institute of Science
    Péter PEKKER, University of Pannonia, Nanolab
    Daniel M. CHEVRIER, BIAM, CEA Cadarache
    Christopher T. LEFÈVRE, BIAM, CEA Cadarache
    Pascal ARNOUX, BIAM, CEA Cadarache
    Jean ARMENGAUD, Université Paris-Saclay, CEA, INRAE, Département Médicaments et Technologies pour la Santé (DMTS)
    Caroline L. MONTEIL, BIAM, CEA Cadarache
    Assaf GAL, Department of Plant and Environmental Sciences, Weizmann Institute of Science
    Mihály PÓSFAI, University of Pannonia, Nanolab
    Damien FAIVRE, BIAM, CEA Cadarache

    person_pinYeseul PARK, Aix-Marseille Université, CEA, CNRS, BIAM, 13108 Saint Paul lez Durance, France
    16:15 | O4 Nanobiomaterials - Development of Virus-Like Particle platform for the control of cell behaviorPSOP-09Hasna MAAYOUF, Université de Haute-Alsace, IS2M-CNRS 7361, F-68100 Mulhouse, France
    Thomas DOS-SANTOS, Université de Haute-Alsace, IS2M-CNRS 7361
    Isabelle BRIGAUD, Université de Haute-Alsace, IS2M-CNRS 7361
    Tatiana PETITHORY, Université de Haute-Alsace, IS2M-CNRS 7361
    Karine ANSELME, Université de Haute-Alsace, IS2M-CNRS 7361
    Carole ARNOLD, Université de Haute-Alsace, IS2M-CNRS 7361
    Laurent PIEUCHOT, Université de Haute-Alsace, IS2M-CNRS 7361

    person_pinHasna MAAYOUF, Université de Haute-Alsace, IS2M-CNRS 7361, F-68100 Mulhouse, France
    15:30 | O1 Neural tissue - Design of a Fibre-based Neuronal Guidance Scaffold for the Inner EarPSOP-10Peter BEHRENS, Institute of Inorganic Chemistry, Leibniz University Hannover, Hannover, Germany; Department of Otorhinolaryngology, Head and Neck Surgery, Hannover Medical School, Hannover, Germany; Cluster of Excellence Hearing4all, Hannover, Germany
    Monika SEEGERS, Institute of Inorganic Chemistry, Leibniz University Hannover; Cluster of Excellence Hearing4all, Hannover
    Inga WILLE, Institute of Inorganic Chemistry, Leibniz University Hannover; Cluster of Excellence Hearing4all, Hannover
    Jennifer HARRE, Department of Otorhinolaryngology, Head and Neck Surgery, Hannover Medical School, Hannover; Cluster of Excellence Hearing4all, Hannover
    Thomas LENARZ, Department of Otorhinolaryngology, Head and Neck Surgery, Hannover Medical School, Hannover; Cluster of Excellence Hearing4all, Hannover
    Athanasia WARNECKE, Department of Otorhinolaryngology, Head and Neck Surgery, Hannover Medical School, Hannover; Cluster of Excellence Hearing4all, Hannover

    person_pinMonika SEEGERS, Institute of Inorganic Chemistry, Leibniz University Hannover; Cluster of Excellence Hearing4all, Hannover
    15:45 | O2 Neural Tissue - Anisotropic Interfacial Complexes of Collagen and Glycosaminoglycans as Mimics of Neural TissuesPSOP-10Rui R. COSTA, 3B’s Research Group, I3Bs – Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Avepark – Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805-017 Barco, Guimarães, Portugal; ICVS/3B’s – PT Government Associate Laboratory, Braga/Guimarães, Portugal
    David CABALLERO, 3B's Research Group, University of Minho
    Diana SOARES DA COSTA, 3B's Research Group, University of Minho
    Subhas C. KUNDU, 3B's Research Group, University of Minho
    Rui L. REIS, 3B's Research Group, University of Minho
    Iva PASHKULEVA, 3B's Research Group, University of Minho

    person_pinRui R. COSTA, 3B’s Research Group, I3Bs – Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Avepark – Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805-017 Barco, Guimarães, Portugal; ICVS/3B’s – PT Government Associate Laboratory, Braga/Guimarães, Portugal
    16:00 | O3 Neural Tissue - Fabrication of Living Electrodes Using Multiphoton Induced Degradation in a Photoresponsive Hydrogels for Neural Interface ApplicationsPSOP-10Augusto LOFFREDO, CÚRAM SFI Research Centre for Medical Devices, National University of Ireland Galway, Galway, Ireland
    Lana VAN DAMME, Polymer Chemistry & Biomaterial Group – Centre of Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Jasper VAN HOORICK, Polymer Chemistry & Biomaterial Group – Centre of Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Sandra VAN VLIERBERGHE, Polymer Chemistry & Biomaterial Group – Centre of Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Abhay PANDIT, CÚRAM SFI Research Centre for Medical Devices, National University of Ireland Galway, Galway, Ireland
    Manus BIGGS, CÚRAM SFI Research Centre for Medical Devices, National University of Ireland Galway, Galway, Ireland

    person_pinJasper VAN HOORICK, Polymer Chemistry & Biomaterial Group – Centre of Macromolecular Chemistry, Ghent University, Ghent, Belgium
    16:15 | O4 Neural Tissue - The mechanical side of the brain: a tissue engineered model to explore the role of mechanical properties alterations in CNS demyelinationPSOP-10Eva Daniela CARVALHO, i3S – Instituto for Health and Research in Innovation, University of Porto, Porto, Portugal / INEB – Institute of Biomedical Engineering, University of Porto, Porto, Portugal / FEUP – Faculty of Engineering, University of Porto, Porto, Portugal
    Miguel Rafael Gonçalves MORAIS, i3S – Instituto for Health and Research in Innovation, University of Porto, Porto, Portugal / INEB – Institute of Biomedical Engineering, University of Porto, Porto, Portugal
    Georgia ATHANASOPOULOU, i3S – Instituto for Health and Research in Innovation, University of Porto, Porto, Portugal / INEB – Institute of Biomedical Engineering, University of Porto, Porto, Portugal / ICBAS – School of Medicine and Biomedical Sciences, University of Porto, Portugal
    Marco ARAÚJO, i3S – Instituto for Health and Research in Innovation, University of Porto, Porto, Portugal / INEB – Institute of Biomedical Engineering, University of Porto, Porto, Portugal
    Hendrik HUBBE, TU Delft – Delft University of Technology, Chemical Engineering Department, The Netherlands
    Eduardo MENDES, TU Delft – Delft University of Technology, Chemical Engineering Department, The Netherlands
    Cristina Carvalho BARRIAS, i3S – Instituto for Health and Research in Innovation, University of Porto, Porto, Portugal / INEB – Institute of Biomedical Engineering, University of Porto, Porto, Portugal / ICBAS – School of Medicine and Biomedical Sciences, University of Porto, Portugal
    Ana Paula PÊGO, i3S – Instituto for Health and Research in Innovation, University of Porto, Porto, Portugal / INEB – Institute of Biomedical Engineering, University of Porto, Porto, Portugal / ICBAS – School of Medicine and Biomedical Sciences, University of Porto, Portugal

    person_pinEva Daniela CARVALHO, i3S – Instituto for Health and Research in Innovation, University of Porto, Porto, Portugal / INEB – Institute of Biomedical Engineering, University of Porto, Porto, Portugal / FEUP – Faculty of Engineering, University of Porto, Porto, Portugal
    15:30 | KL Clinical cardiovascular - Biomaterials in Vascular Surgery: Clinical Issues and (Endo)Vascular perspectivesCS1Caroline CARADU, Bordeaux University Hospital
    Eric DUCASSE, Bordeaux University Hospital
    Xavier BÉRARD, Bordeaux University Hospital

    person_pinCaroline CARADU, Bordeaux University Hospital, Bordeaux, France
    15:45 | O1 Clinical cardiovascular - Preclinical Evaluation of a Novel Nanofibrous Resorbable Synthetic Vascular Stent up to 12 Months in Rabbits CS1Dina IBRAHIM, Eindhoven University of Technology, Eindhoven, The Netherlands
    Sylvia DEKKER, Eindhoven University of Technology, Eindhoven, The Netherlands
    Arturo LICHAUCO, Eindhoven University of Technology, Eindhoven, The Netherlands; Stentit BV, Eindhoven, The Netherlands
    Golo VON BASUM, Stentit BV, Eindhoven, The Netherlands
    Bart SANDERS, Stentit BV, Eindhoven, The Netherlands
    Marc VAN SAMBEEK, Catharina Hospital Eindhoven, The Netherlands
    Yoshinobu ONUMA, National University of Ireland, Galway, Ireland
    Patrick SERRUYS, National University of Ireland, Galway, Ireland
    Carlijn BOUTEN, Eindhoven University of Technology, Eindhoven, The Netherlands
    Anthal SMITS, Eindhoven University of Technology, Eindhoven, The Netherlands

    person_pinAnthal SMITS, Eindhoven University of Technology, Eindhoven, The Netherlands
    16:00 | O2 Clinical cardiovascular - CHARACTERIZATION OF A CELL-ASSEMBLED EXTRACELLULAR MATRIX (CAM) SUTURE MATERIALCS1Paul BORCHIELLINI , Univ. Bordeaux, Inserm, BioTis, UMR1026, F-33000 Bordeaux, France ; CHU de Bordeaux, Bordeaux, France
    Adeline RAMES, Univ. Bordeaux, Inserm, BioTis, UMR1026, F-33000 Bordeaux, France
    Francois ROUBERTIE, CHU de Bordeaux, Bordeaux, France
    Nicolas L'HEUREUX, Univ. Bordeaux, Inserm, BioTis, UMR1026, F-33000 Bordeaux, France
    Fabien KAWECKI, Univ. Bordeaux, Inserm, BioTis, UMR1026, F-33000 Bordeaux, France

    person_pinPaul BORCHIELLINI , Univ. Bordeaux, Inserm, BioTis, UMR1026, F-33000 Bordeaux, France ; CHU de Bordeaux, Bordeaux, France
    16:15 | O3 Clinical cardiovascular - Extent of Calcification in Heart Valve Tissue Engineering; a Systematic Review and Meta-Analysis of Large-Animal Studies of Pulmonary Valve Replacement.CS1Dewy VAN DER VALK, Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, The Netherlands
    Aleksandra FOMINA, Graduate School of Life Sciences, Utrecht University, Utrecht, The Netherlands
    Marcelle UITERWIJK, Heart Center, Amsterdam University Medical Center, Amsterdam, The Netherlands
    Carlijn HOOIJMANS, Department for health evidence (SYRCLE), Radboud University Medical Center, Nijmegen, The Netherlands
    Anat AKIVA, Department of Biochemistry, Radboud University Medical Center, Nijmegen, The Netherlands
    Jolanda KLUIN, Heart Center, Amsterdam University Medical Center, Amsterdam, The Netherlands
    Carlijn BOUTEN, Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, The Netherlands
    Anthal SMITS, Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, The Netherlands

    person_pinDewy VAN DER VALK, Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, The Netherlands
    15:30 | KL Translational I - From Quantum Chemistry to Drug Eluting Stents: a Historical Narrative of How The Electro-Grafting of Vinylic Polymers Ended Up in PatientsTrans S1Christophe BUREAU, AlchiMedics S.A.S.,Paris, France
    Jianhua SUN, Sino Medical Sciences & Technology Inc.

    person_pinChristophe BUREAU, AlchiMedics S.A.S.,Paris, France
    16:00 | O1 Translational I - Novel Fermentation based functional bio-material advances - GMP compliant non animal derived Collagen and bacterial CelluloseTrans S1Norbert WINDHAB, Evonik
    Tim SMONIK, Evonik
    T. SMOLNIK, Evonik
    A. KARAU, Evonik
    Theresia KUNTZ, Evonik

    person_pinT. SMOLNIK, Evonik, Essen, Germany
    16:15 | O2 Translational I - Development of new tissue-engineered vascular grafts: implantation, conservation and sterilization.Trans S1Diane POTART, BioTis INSERM U1026, Université de Bordeaux, Bordeaux, France
    Maude GLUAIS, BioTis Inserm U1026
    Nicolas DA SILVA, BioTis Inserm U1026
    Alexandra GAUBERT, ChemBioPharm - Université de Bordeaux
    Benoit ROUSSEAU, Animal facilities - Université de Bordeaux
    Marie HOURQUES, marie.hourques@inserm.fr
    Nicolas L'HEUREUX, BioTis INSERM U1026

    person_pinDiane POTART, BioTis INSERM U1026, Université de Bordeaux, Bordeaux, France
    17:15 | - How to keep young researchers in a good mental shape?PART IIAn BOGAERTS, HSE Department, KU Leuven, Leuven, Belgium

    person_pinAn BOGAERTS, HSE Department, KU Leuven, Leuven, Belgium
    17:45 | - Navigating The Early Academic Career, With a SmilePART IIVianney DELPLACE, Nantes Université, Oniris, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, Nantes, France

    person_pinVianney DELPLACE, Nantes Université, Oniris, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, Nantes, France
    17:15 | O1 Cardiovascular - 3D in situ ECM deposition: a new class of biohybrid material for cardiac repairPSOP-11Albane CARRÉ, Université Paris Cité, INSERM U1148, Paris, France
    Emannuelle POQUE, Université de Bordeaux, Institut CBMN UMR 5248, Pessac, France
    Christelle HARSCOAT-SCHIAVO, Université de Bordeaux, Institut CBMN UMR 5248, Pessac, France
    Pascale SUBRA-PATERNAULT, Université de Bordeaux, Institut CBMN UMR 5248, Pessac, France
    Teresa SIMON-YARZA, Université Paris Cité, INSERM U1148, Paris, France

    person_pinAlbane CARRÉ, Université Paris Cité, INSERM U1148, Paris, France
    17:30 | O2 Cardiovascular - Poly(alkylene terephthalate)s for Cardiovascular Applications: Effect of Molar Mass and Alkyl Chain Length on Surface Properties and BiocompatibilityPSOP-11Lenny VAN DAELE, Polymer Chemistry and Biomaterials Group (PBM), Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Babs VAN DE VOORDE, Polymer Chemistry and Biomaterials Group (PBM), Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Lobke DE VOS, Polymer Chemistry and Biomaterials Group (PBM), Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Robin COLENBIER, Polymer Chemistry and Biomaterials Group (PBM), Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Laurens PARMENTIER, Polymer Chemistry and Biomaterials Group (PBM), Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Louis VAN DER MEEREN, Department of Biotechnology, Ghent University, Ghent, Belgium
    Andre SKIRTACH, Department of Biotechnology, Ghent University, Ghent, Belgium
    Ruslan DMITRIEV, Department of Basic Medical Sciences, Tissue Engineering and Biomaterials Group, Ghent University, Ghent, Belgium
    Sandra VAN VLIERBERGHE, Polymer Chemistry and Biomaterials Group (PBM), Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Peter DUBRUEL, Polymer Chemistry and Biomaterials Group (PBM), Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium

    person_pinLenny VAN DAELE, Polymer Chemistry and Biomaterials Group (PBM), Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    17:45 | O3 Cardiovascular - High-throughput Screening to Mimic Tunica Media SMCs Alignment in Porous Blood Vessel ScaffoldsPSOP-11Klaudia JURCZAK, University of Groningen, Groningen, The Netherlands
    Ruichen ZHANG, Master student
    Richte SCHUURMANN, co-promotor
    Henri LEUVENINK, Professor
    Jan-Luuk HILLEBRANDS , professor
    Ruud BANK, promotor
    Jean-Paul DE VRIES , promotor
    Patrick VAN RIJN, promotor

    person_pinKlaudia JURCZAK, University of Groningen, Groningen, The Netherlands
    18:00 | O4 Cardiovascular - First Implantation of an Allogeneic Woven Tissue-Engineered Blood Vessel Made of Cell-Assembled Extracellular MatrixPSOP-11Fabien KAWECKI, Univ. Bordeaux, Inserm, BioTis, UMR1026, F-33000 Bordeaux, France.
    Gaëtan ROUDIER, Univ. Bordeaux, Inserm, BioTis, UMR1026, F-33000 Bordeaux, France.
    Yoann TORRES, Univ. Bordeaux, Inserm, BioTis, UMR1026, F-33000 Bordeaux, France.
    Paul BORCIELLINI, Univ. Bordeaux, Inserm, BioTis, UMR1026, F-33000 Bordeaux, France. Congenital Heart Diseases Department, CHU de Bordeaux, Pessac, France.
    Luca PORRO, Vascular Surgery Department, CHU de Bordeaux, Bordeaux, France
    François ROUBERTIE, Congenital Heart Diseases Department, CHU de Bordeaux, Pessac, France.
    Xavier BERARD, Univ. Bordeaux, Inserm, BioTis, UMR1026, F-33000 Bordeaux, France. Vascular Surgery Department, CHU de Bordeaux, Bordeaux, France
    Nicolas L'HEUREUX, Univ. Bordeaux, Inserm, BioTis, UMR1026, F-33000 Bordeaux, France.

    person_pinFabien KAWECKI, Univ. Bordeaux, Inserm, BioTis, UMR1026, F-33000 Bordeaux, France.
    17:15 | O1 Hydrogels I - A Universal Nanogel-based Coating Approach For Medical ImplantsPSOP-12Damla KESKIN, University of Groningen, University Medical Center Groningen, Department of Biomedical Engineering, Groningen, The Netherlands
    Devlina GHOSH, University of Groningen, University Medical Center Groningen, Department of Biomedical Engineering, Groningen, The Netherlands
    Reinier BRON, University of Groningen, University Medical Center Groningen, Department of Biomedical Engineering, Groningen, The Netherlands
    Theo VAN KOOTEN, University of Groningen, University Medical Center Groningen, Department of Biomedical Engineering, Groningen, The Netherlands
    Clio M. SIEBENMORGEN, University of Groningen, University Medical Center Groningen, Department of Biomedical Engineering, Groningen, The Netherlands
    Guangyue ZU, University of Groningen, University Medical Center Groningen, Department of Biomedical Engineering, Groningen, The Netherlands
    Max J.H. WITJES, University of Groningen, University Medical Center Groningen, Department of Oral and Maxillofacial Surgery, Groningen, The Netherlands
    Patrick VAN RIJN, University of Groningen, University Medical Center Groningen, Department of Biomedical Engineering, Groningen, The Netherlands

    person_pinDevlina GHOSH, University of Groningen, University Medical Center Groningen, Department of Biomedical Engineering, Groningen, The Netherlands
    17:30 | O2 Hydrogels I - Cell-instructive 3D Printed Multilayered Biomaterials embedded in Photocrosslinkable Hydrogels for Vascular Tissue EngineeringPSOP-12João BORGES, Department of Chemistry, CICECO – Aveiro Institute of Materials, University of Aveiro, 3810-193 Aveiro, Portugal
    Cristiana SOUSA, Department of Chemistry, CICECO – Aveiro Institute of Materials, University of Aveiro, 3810-193 Aveiro, Portugal
    Catarina SARAIVA, Department of Chemistry, CICECO – Aveiro Institute of Materials, University of Aveiro, 3810-193 Aveiro, Portugal
    Tiago CORREIA, Department of Chemistry, CICECO – Aveiro Institute of Materials, University of Aveiro, 3810-193 Aveiro, Portugal
    Sónia PATRÍCIO, Department of Chemistry, CICECO – Aveiro Institute of Materials, University of Aveiro, 3810-193 Aveiro, Portugal
    Tamagno PESQUEIRA, Department of Chemistry, CICECO – Aveiro Institute of Materials, University of Aveiro, 3810-193 Aveiro, Portugal
    Maria Isabel RIAL-HERMIDA, Department of Chemistry, CICECO – Aveiro Institute of Materials, University of Aveiro, 3810-193 Aveiro, Portugal
    João MANO, Department of Chemistry, CICECO – Aveiro Institute of Materials, University of Aveiro, 3810-193 Aveiro, Portugal

    person_pinJoão BORGES, Department of Chemistry, CICECO – Aveiro Institute of Materials, University of Aveiro, 3810-193 Aveiro, Portugal
    17:45 | O3 Hydrogels I - Ex vivo and in vivo evaluation of injectable and porous hydrogels as support for muscle repair PSOP-12Cloé PARET, PGNM-INMG, CNRS UMR 5310 - INSERM U1217, Claude Bernard university, Lyon, France
    Marie QUINCEROT, IBCP
    Louise GRIVEAU, IBCP
    Vincent GACHE, INMG-PGNM
    Jérôme SOHIER, IBCP

    person_pinCloé PARET, PGNM-INMG, CNRS UMR 5310 - INSERM U1217, Claude Bernard university, Lyon, France
    18:00 | O4 Hydrogels I - Thermosensitive shrinking behavior of biopolymer-based hydrogels for high resolution printingPSOP-12Martina VIOLA, Department of Pharmaceutical Sciences (UIPS), Faculty of Science, Utrecht University, Utrecht, The Netherlands; Department of Orthopaedics, University Medical Center Utrecht, Utrecht, The Netherlands.
    Marta GARCIA VALVERDE, Utrecht University
    Jaap VAN TRIJP, Utrecht University
    Paulina NUÑEZ BERNAL, University Medical Center Utrecht
    Carl.C.L. SCHUURMANS, Utrecht University
    Cornelus F. VAN NOSTRUM, Utrecht University
    Riccardo LEVATO, University Medical Center Utrecht
    Tina VERMONDEN, Utrecht University

    person_pinMartina VIOLA, Department of Pharmaceutical Sciences (UIPS), Faculty of Science, Utrecht University, Utrecht, The Netherlands; Department of Orthopaedics, University Medical Center Utrecht, Utrecht, The Netherlands.
    17:15 | KL Osteoarticular repair - Clinical Applications of Enamel Matrix Derivative, a Biomimetic and Inflammation-modulating BiomaterialCS2Nathalie WEBER, Institut Straumann AG

    person_pinNathalie WEBER, Institut Straumann AG, Basel, Switzerland
    17:45 | O1 Osteoarticular repair - Influence of glenoid microdrilling on tissue remodeling at the pyrocarbon hemi-implant interfaceCS2Rémy GAUTHIER, Univ Lyon, CNRS, INSA Lyon, UCBL, Matéis, Lyon, France
    Amira HANNOUN, Wright Medical, Grenoble, France
    Imbert DE GAUDEMARIS, Univ Lyon, CNRS, INSA Lyon, LaMCoS, France
    Nina ATTIK, Univ Lyon, CNRS, UCBL, LMI, France
    Michel HASSLER, Wright Medical, Grenoble, France
    Ana-Maria TRUNFIO-SFARGHIU, Univ Lyon, CNRS, INSA Lyon, LaMCoS, France

    person_pinRémy GAUTHIER, Univ Lyon, CNRS, INSA Lyon, UCBL, Matéis, Lyon, France
    18:00 | O2 Osteoarticular repair - Preclinical study design and validation of a model of intervertebral disc degeneration for the evaluation of glyco-functionalised biomaterialsCS2Kieran JOYCE, CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland, Galway, Ireland
    Jordy SCHOL, Department of Orthopaedic Surgery, Surgical Science, Tokai University School of Medicine, Isehara, Japan / Research Center for Regenerative Medicine and Cancer Stem Cell, Tokai University School of Medicine, Isehara, Japan
    Aert SCHEPER, CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland, Galway, Ireland
    Frances BACH, Department of Clinical Sciences, Faculty of Veterinary Medicine, Utrecht University, Utrecht, The Netherlands.
    Björn MEIJ, Department of Clinical Sciences, Faculty of Veterinary Medicine, Utrecht University, Utrecht, The Netherlands.
    Richard DRAKE, Department of Cell and Molecular Pharmacology and Experimental Therapeutics, Medical University of South Carolina, Charleston, USA.
    Marianna A. TRYFONIDOU, Department of Clinical Sciences, Faculty of Veterinary Medicine, Utrecht University, Utrecht, The Netherlands.
    Martina MARCHETTI-DESCHMANN, Institute of Chemical Technologies and Analytics, TU Wien, 1040 Vienna, Austria.
    Daisuke SAKAI, Department of Orthopaedic Surgery, Surgical Science, Tokai University School of Medicine, Isehara, Japan / Research Center for Regenerative Medicine and Cancer Stem Cell, Tokai University School of Medicine, Isehara, Japan
    Abhay PANDIT, CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland, Galway, Ireland

    person_pinKieran JOYCE, CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland, Galway, Ireland
    18:15 | O3 Osteoarticular repair - 3D-printed Biocompatible and Biodegradable PLA Scaffolds with Optimized Architecture and BMP-2 Dose to Repair a Sheep Metatarsal Critical-size Bone DefectCS2Charlotte GAROT, U1292 Biosanté, Equipe CNRS EMR 5000 BRM, Université Grenoble-Alpes, INSERM, CEA, Grenoble, France
    Sarah SCHOFFIT, B3OA, Université de Paris, CNRS, INSERM, Paris, France ; ENVA, B3OA, Maisons-Alfort, France
    Paul MACHILLOT, U1292 Biosanté, Equipe CNRS EMR 5000 BRM, Université Grenoble-Alpes, INSERM, CEA, Grenoble, France
    Cécile MOUFOULET, CIC1401, CHU de Bordeaux, Bordeaux, France
    Julie VIAL, B3OA, Université de Paris, CNRS, INSERM, Paris, France ; ENVA, B3OA, Maisons-Alfort, France
    Adeline DECAMBRON, B3OA, Université de Paris, CNRS, INSERM, Paris, France ; ENVA, B3OA, Maisons-Alfort, France
    Claire DEROY, CIC1401, CHU de Bordeaux, Bordeaux, France
    Julien VOLLAIRE, Institut pour l'Avancée des Biosciences, INSERM U1209, Université Grenoble-Alpes, Grenoble, France
    Martine RENARD, CIC1401, CHU de Bordeaux, Bordeaux, France
    Véronique JOSSERAND, Institut pour l'Avancée des Biosciences, INSERM U1209, Université Grenoble-Alpes, Grenoble, France
    Samantha ROQUES, CIC1401, CHU de Bordeaux, Bordeaux, France
    Marlène DURAND, CIC1401, CHU de Bordeaux, Bordeaux, France
    Laurence BORDENAVE, CIC1401, CHU de Bordeaux, Bordeaux, France
    Véronique VIATEAU, B3OA, Université de Paris, CNRS, INSERM, Paris, France ; ENVA, B3OA, Maisons-Alfort, France
    Mathieu MANASSERO, B3OA, Université de Paris, CNRS, INSERM, Paris, France ; ENVA, B3OA, Maisons-Alfort, France
    Georges BETTEGA, Institut pour l'Avancée des Biosciences, INSERM U1209, Université Grenoble-Alpes, Grenoble, France ; Service de chirurgie maxillo-faciale, CHANGE, Epagny Metz-Tassy, France
    Delphine LOGEART-AVRAMOGLOU, B3OA, Université de Paris, CNRS, INSERM, Paris, France
    Catherine PICART, U1292 Biosanté, Equipe CNRS EMR 5000 BRM, Université Grenoble-Alpes, INSERM, CEA, Grenoble, France

    person_pinCharlotte GAROT, U1292 Biosanté, Equipe CNRS EMR 5000 BRM, Université Grenoble-Alpes, INSERM, CEA, Grenoble, France
    17:15 | KL Translational II - Shinning a light on tissue repair: from the bench to the bedsideTrans S2Maria PEREIRA, Tissium
    Rachel MOTTE, Tissium
    Elise DEVRIES, Tissium

    person_pinMaria PEREIRA, Tissium, Paris, France
    17:45 | O1 Translational II - Inguinal Hernia Mesh with a Drug Delivery SystemTrans S2François AUBERT, Cousin Surgery, Wervicq, France
    Stéphanie DEGOUTIN, Univ. Lille, CNRS, INRA, ENSCL UMR8207, UMET – Unité Matériaux et Transformations, F-59000 Lille, France
    Feng CHAI, Univ. Lille, Inserm, CHU Lille, U1008 – Controlled Drug Delivery Systems and Biomaterials, F-59000 Lille, France
    Mickaël MATON, Univ. Lille, Inserm, CHU Lille, U1008 – Controlled Drug Delivery Systems and Biomaterials, F-59000 Lille, France
    Safa OUERGHEMMI, Cousin Surgery, 59117 WERVICQ-SUD, FRANCE
    Bernard MARTEL, Univ. Lille, CNRS, INRA, ENSCL UMR8207, UMET – Unité Matériaux et Transformations, F-59000 Lille, France
    Nicolas BLANCHEMAIN, Univ. Lille, Inserm, CHU Lille, U1008 – Controlled Drug Delivery Systems and Biomaterials, F-59000 Lille, France

    person_pinFrançois AUBERT, Cousin Surgery, Wervicq, France
    18:00 | O2 Translational II - Industrialization of mesenchymal stem cell derived extracellular vesicle manufacturing Trans S2Adam HARDING, Process Development Department, Lonza Cell and Gene, Geleen, The Netherlands
    Bart VAN DIJK, Lonza Cell and Gene
    Paul CAHILL, Dublin City University
    Verena BÖRGER, Universitätsklinikum Essen
    Ravi VYZASATYA, Lonza Cell and Gene

    person_pinAdam HARDING, Process Development Department, Lonza Cell and Gene, Geleen, The Netherlands
    18:15 | O3 Translational II - A Novel Resorbable Polyester, Tailor-Made to Support as a Knitted Temporary Support for Primary Ventral & Incisional Hernia Repair Trans S2Robert VESTBERG, Medtronic – Sofradim Production, Trévoux, France
    Julie LECUIVRE, Medtronic - Sofradim Production
    Emilie PAYET, Medtronic - Sofradim Production
    Amandine RADLOVIC, Medtronic - Sofradim Production
    Yves BAYON, Medtronic - Sofradim Production

    person_pinYves BAYON, Medtronic - Sofradim Production
    09:45 | Eur S 01 - Open innovation test beds, a tool for the effective validation of new technologies on medical devicesEur SIraida LOINAZ, CIDETEC, Basque Research and Technology Alliance (BRTA), Donostia - San Sebastián, Spain

    person_pinIraida LOINAZ, CIDETEC, Basque Research and Technology Alliance (BRTA), Donostia - San Sebastián, Spain, Donostia - San Sebastián, Spain
    10:00 | Eur S 02 - cmRNAbone project: 3D Printed-Matrix Assisted Chemically Modified RNAs Bone Regenerative Therapy for Trauma and Osteoporotic PatientsEur SMatteo D'ESTE, AO Research Institute Davos
    Daphne VAN DER HEIDE, Department of Health Science and Technology, ETH Zürich
    Joëlle AMÉDÉE, Inserm U1026, université de Bordeaux, Bioingénierie tissulaire

    person_pinMatteo D'ESTE, AO Research Institute Davos, Davos, Switzerland
    10:15 | Eur S 03 - From the Teaming Phase 2 project Baltic Biomaterials Centre of Excellence consortiumEur SDagnija LOCA, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of Riga Technical University, Latvia

    person_pinDagnija LOCA, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of Riga Technical University, Latvia
    10:30 | Eur S 04 - From pathobiology to synovia on chip: driving rheumatoid arthritis to the precision medicine goal (FLAMIN-GO)Eur SAnnalisa CHIOCCHETTI, Department of Health Sciences, Interdisciplinary Research Center of Autoimmune Diseases-IRCAD and Center for Translational Research on Autoimmune and Allergic Disease-CAAD, Università del Piemonte Orientale, 28100 Novara, Italy; Trusteck s.r.l. (TRUSTECK, Italy); Max Planck Institute (MPG, Germany); Science on the Street (SoS, Slovenia); REGENHU (reH, Switzerland) and EU CORE Consulting Srl (EUCORE, Italy) , Italy
    Consortium FLAMIN-GO , Department of Health Sciences, Interdisciplinary Research Center of Autoimmune Diseases-IRCAD and Center for Translational Research on Autoimmune and Allergic Disease-CAAD, Università del Piemonte Orientale, 28100 Novara, Italy FLAMIN-GO Consortium: Università del Piemonte Orientale (UPO, Italy), Instituto Nacional de Engenharia Biomédica (INEB, Portugal); Consiglio Nazionale delle Ricerche (CNR, Italy); Queen Mary University of London (QMUL, England); Associazione per la Ricerca che Cura (ARCA, Italy); Riga Technical University (RTU, Latvia); Enginsoft Turkey (ES, Turkey); Fluidigm France Sarl (FLUIDIGM, France); AO Research Institute (ARI, Switzerland); Trusteck s.r.l. (TRUSTECK, Italy); Max Planck Institute (MPG, Germany); Science on the Street (SoS, Slovenia); REGENHU (reH, Switzerland) and EU CORE Consulting Srl (EUCORE, Italy)

    person_pinAnnalisa CHIOCCHETTI, Department of Health Sciences, Interdisciplinary Research Center of Autoimmune Diseases-IRCAD and Center for Translational Research on Autoimmune and Allergic Disease-CAAD, Università del Piemonte Orientale, 28100 Novara, Italy; Trusteck s.r.l. (TRUSTECK, Italy); Max Planck Institute (MPG, Germany); Science on the Street (SoS, Slovenia); REGENHU (reH, Switzerland) and EU CORE Consulting Srl (EUCORE, Italy) , Italy, Italy
    10:45 | Eur S 05 - EVPRO - Development of Extracellular Vesicles loaded hydrogel coatings with immunomodulatory activity for Promoted Regenerative Osseointegration of revision endoprosthesis Eur SClaudia SKAZIK-VOOGT, Precision engineering and Automation, Fraunhofer Institute for Production Technology, Aachen, Germany
    Consortium EVPRO, 1Precision engineering and Automation, Fraunhofer Institute for Production Technology, Aachen, Germany 2University Hospital Essen, Essen, Germany; Lonza Cell & Gene, Geleen, Netherlands; Dublin City University, Dublin, Ireland; Trinity College Dublin, Dublin, Ireland; Leibniz Institute for interactive materials, Aachen, Germany; University Maastricht, Maastricht, Netherland; Meotec GmbH, Aachen, Germany; Stryker, Amsterdam, Netherland; Politecnico di Torino, Torino, Italy; Knappschafts Hospital Bochum, Bochum, Germany

    person_pinClaudia SKAZIK-VOOGT, Precision engineering and Automation, Fraunhofer Institute for Production Technology, Aachen, Germany
    11:00 | Eur S 06 - Background, Success and Failures to get an ERCEur SRiccardo LEVATO, Utrecht University

    person_pinRiccardo LEVATO, Utrecht University, Utrech, The Netherlands
    09:45 | KL Conductive biomaterials - Conducting biomaterials for regenerative bioelectronics – a story of electrochemistrySYMP-09Sebastian SHANER, Department of Microsystems Engineering (IMTEK) , University of Freiburg
    Sebastian JOSÉ LEAL-ORDONEZ, Department of Microsystems Engineering (IMTEK) , University of Freiburg
    Lukas MATTER, Department of Microsystems Engineering (IMTEK) , University of Freiburg
    Anna SAVELYEVA, Department of Microsystems Engineering (IMTEK) , University of Freiburg
    Ute RIEDE, Department of Microsystems Engineering (IMTEK) , University of Freiburg
    Nicole JEDRUSIK, Department of Microsystems Engineering (IMTEK) , University of Freiburg
    Ahmed SAEED, Department of Microsystems Engineering (IMTEK) , University of Freiburg
    Elisabeth OTTE, Department of Microsystems Engineering (IMTEK) , University of Freiburg
    Fernanda NARVAEZ, Department of Microsystems Engineering (IMTEK) , University of Freiburg
    Oliya ABDULLAEVA, Division of Nursing and Medical Technology, Luleå University of Technology
    Christian BÖHLER, Department of Microsystems Engineering (IMTEK) , University of Freiburg; 3Division of Nursing and Medical Technology, Luleå University of Technology
    Maria ASPLUND, Department of Microsystems Engineering (IMTEK) , University of Freiburg; BrainLinks-BrainTools Center, University of Freiburg; Division of Nursing and Medical Technology, Luleå University of Technology; Department of Microtechnology and Nanoscience, Chalmers University of Technology; Freiburg Institute for Advanced Studies (FRIAS), University of Freiburg

    person_pinMaria ASPLUND, Department of Microsystems Engineering (IMTEK) , University of Freiburg; BrainLinks-BrainTools Center, University of Freiburg; Division of Nursing and Medical Technology, Luleå University of Technology; Department of Microtechnology and Nanoscience, Chalmers University of Technology; Freiburg Institute for Advanced Studies (FRIAS), University of Freiburg , Freiburg, Germany
    10:15 | O1 Conductive biomaterials - Elongation-induced Crystallization by One-step Melt-spinning of Poly (L-lactic Acid) Fibers for Future Piezoelectric BioapplicationsSYMP-09Richard SCHÖNLEIN, 1) POLYMAT and Polymers and Advanced Materials: Physics, Chemistry and Technology, Faculty of Chemistry, University of Basque Country UPV/EHU, 20018 Donostia-San Sebastian, Spain; 2) POLYMAT and Department of Mining-Metallurgy Engineering and Materials Science, Faculty of Engineering in Bilbao, University of Basque Country UPV/EHU, 48013 Bilbao, Spain
    Robert AGUIRRESAROBE, POLYMAT and Polymers and Advanced Materials: Physics, Chemistry and Technology, Faculty of Chemistry, University of Basque Country UPV/EHU, 20018 Donostia-San Sebastian, Spain
    Jone M. UGARTEMENDIA, POLYMAT and Department of Mining-Metallurgy Engineering and Materials Science, Faculty of Engineering in Bilbao, University of Basque Country UPV/EHU, 48013 Bilbao, Spain

    person_pinRichard SCHÖNLEIN, 1) POLYMAT and Polymers and Advanced Materials: Physics, Chemistry and Technology, Faculty of Chemistry, University of Basque Country UPV/EHU, 20018 Donostia-San Sebastian, Spain; 2) POLYMAT and Department of Mining-Metallurgy Engineering and Materials Science, Faculty of Engineering in Bilbao, University of Basque Country UPV/EHU, 48013 Bilbao, Spain
    10:30 | O2 Conductive biomaterials - Electroconductive Scaffolds Based on Gelatin and PEDOT:PSS for Cardiac Regenerative MedicineSYMP-09Franco FURLANI, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy
    Nicola SANGIORGI, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy
    Elisabetta CAMPODONI, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy
    Monica MONTESI, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy
    Alessandra SANSON, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy
    Monica SANDRI, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy
    Silvia PANSERI, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy

    person_pinFranco FURLANI, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy
    10:45 | O3 Conductive biomaterials - Nanocellulose Composite Wound Dressings with Integrated pH Sensing Capabilities for Detection of Wound InfectionsSYMP-09Olof ESKILSSON, Laboratory of Molecular Materials, Division of Biophysics and Bioengineering, Department of Physics, Chemistry and Biology, Linköping University, SE-581 83 Linköping, Sweden
    Elisa ZATTARIN, Laboratory of Molecular Materials, Division of Biophysics and Bioengineering, Department of Physics, Chemistry and Biology, Linköping University, SE-581 83 Linköping, Sweden
    Linn BERGLUND, Division of Materials Science, Department of Engineering Sciences and Mathematics, Luleå University of Technology, SE-971 87 Luleå, Sweden
    Kristiina OKSMAN, Division of Materials Science, Department of Engineering Sciences and Mathematics, Luleå University of Technology, SE-971 87 Luleå, Sweden
    Kristina HANNA, Center for Disaster Medicine and Traumatology, Department of Biomedical and Clinical Sciences, Linköping University, SE-581 85 Linköping, Sweden
    Jonathan RAKAR, Center for Disaster Medicine and Traumatology, Department of Biomedical and Clinical Sciences, Linköping University, SE-581 85 Linköping, Sweden
    Torbjörn BENGTSSON, Cardiovascular Research Centre (CVRC), School of Medical Sciences, Örebro University, SE-701 82 Örebro, Sweden
    Johan JUNKER, Center for Disaster Medicine and Traumatology, Department of Biomedical and Clinical Sciences, Linköping University, SE-581 85 Linköping, Sweden
    Robert SELEGÅRD, Laboratory of Molecular Materials, Division of Biophysics and Bioengineering, Department of Physics, Chemistry and Biology, Linköping University, SE-581 83 Linköping, Sweden
    Emma BJÖRK, Division of Nanostructured Materials, Department of Physics, Chemistry and Biology (IFM), Linköping University, SE-58183 Linköping, Sweden
    Daniel AILI, Laboratory of Molecular Materials, Division of Biophysics and Bioengineering, Department of Physics, Chemistry and Biology, Linköping University, SE-581 83 Linköping, Sweden

    person_pinElisa ZATTARIN, Laboratory of Molecular Materials, Division of Biophysics and Bioengineering, Department of Physics, Chemistry and Biology, Linköping University, SE-581 83 Linköping, Sweden
    11:00 | FP01 Conductive biomaterials - Novel Pulsed Electrodeposition Method for Hybrid Conductive Soft Hydrogel based on PEDOT/Alginate for Versatile Drug DeliverySYMP-09Arua DA SILVA, Implantable Bioelectronics Laboratory. Department of Automatic Control and Systems Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK
    Thomas PATERSON, Implantable Bioelectronics Laboratory. Department of Automatic Control and Systems Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK
    Ivan MINEV, Implantable Bioelectronics Laboratory. Department of Automatic Control and Systems Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK

    person_pinArua DA SILVA, Implantable Bioelectronics Laboratory. Department of Automatic Control and Systems Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK
    11:05 | FP02 Conductive biomaterials - The interplay of collagen/bioactive glass nanoparticle coatings and electrical stimulation regimes distinctly enhanced osteogenic differentiation of human mesenchymal stem cellsSYMP-09Poh Soo LEE, Institute of General Electrical Engineering, University of Rostock, Rostock, Germany; Max Bergmann Centre of Biomaterials, Technische Universität Dresden, Dresden, Germany
    Christiane HEINEMANN, Technical University of Dresden; Max-Bergmann Center of Biomaterials, Institute of Materials Science, Faculty of Mechanical Science and Engineering
    Kai ZHENG, Nanjing Medical University; Jiangsu Province Engineering Research Center of Stomatological Translational Medicine
    Revathi APPALI, University of Rostock; Institute of General Electrical Engineering, Faculty of Computer Science and Electrical Engineering; Department of Ageing of Individuals and Society, Interdisciplinary Faculty
    Jan KRIEGHOFF, University Leipzig; Institute of Pharmacy, Pharmaceutical Technology, Faculty of Medicine
    Aldo BOCCACCINI, University of Erlangen-Nuremburg; Department of Material Science and Engineering, Institute of Biomaterials
    Ursula VAN RIENEN, University of Rostock; Institute of General Electrical Engineering, Faculty of Computer Science and Electrical Engineering; Department of Ageing of Individuals and Society, Interdisciplinary Faculty; Department of Life, Light and Matter, Interdisciplinary Faculty
    Vera HINTZE, Technical University of Dresden; Max-Bergmann Center of Biomaterials, Institute of Materials Science, Faculty of Mechanical Science and Engineering

    person_pinPoh Soo LEE, Institute of General Electrical Engineering, University of Rostock, Rostock, Germany; Max Bergmann Centre of Biomaterials, Technische Universität Dresden, Dresden, Germany
    11:10 | FP03 Conductive biomaterials - Electrohydrodynamics based functional nanofibers electrically stimulate neuron regenerationSYMP-09Christoph MÜLLER, Aarhus University
    Menglin CHEN, Department of Biological and Chemical Engineering, Aarhus University, Aarhus, Denmark

    person_pinMenglin CHEN, Department of Biological and Chemical Engineering, Aarhus University, Aarhus, Denmark
    09:45 | KL Nanofibrous materials - Design and Fabrication of Multifunctional Micro-/Nanofiber Meshes for HealthcareSYMP-10Andreas LENDLEIN , Institute of Chemistry & Institute of Biochemistry and Biology, University of Potsdam

    person_pinAndreas LENDLEIN , Institute of Chemistry & Institute of Biochemistry and Biology, University of Potsdam , Potsdam, Germany
    10:15 | O1 Nanofibrous materials - Core-shell electrospun nanofibers incorporated with Silver Nanoparticles for inhibition of microorganismsSYMP-10CAMILA FABIANO FREITAS, State University of Maringá, Maringa-Brazil
    PAULO RICARDO DE SOUZA, State University of Maringá, Maringa-Brazil
    WILKER CAETANO, State University of Maringá, Maringa-Brazil
    EDUARDO RADOVANOVIC, State University of Maringá, Maringa-Brazil
    Edvani MUNIZ, State University of Maringá, Maringa-Brazil and Federal University of Piaui, Teresina-Brazil

    person_pinEdvani MUNIZ, State University of Maringá, Maringa-Brazil and Federal University of Piaui, Teresina-Brazil
    10:30 | O2 Nanofibrous materials - Engineering of dual-stimuli responsive nanofibrous magnetic membranes for localized cancer treatmentSYMP-10Adriana GONÇALVES, i3N/CENIMAT, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica, Portugal
    Joana MATOS, i3N/CENIMAT, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica, Portugal
    Raquel CABRITA, i3N/CENIMAT, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica, Portugal
    Inês RODRIGUES, 3N/CENIMAT, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica, Portugal
    João Paulo BORGES, 3N/CENIMAT, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica, Portugal
    Paula SOARES, i3N/CENIMAT, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica, Portugal

    person_pinPaula SOARES, i3N/CENIMAT, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica, Portugal
    10:45 | O3 Nanofibrous materials - An Improved Wet-electrospun Technology for Fabrication of High Porous PCL Matrix for Cartilage Tissue EngineeringSYMP-10Haoyu WANG, Institute of Orthopaedic & Musculoskeletal Science, UCL, London, UK
    Maryam TAMADDON, UCL
    Chaozong LIU, UCL

    person_pinHaoyu WANG, Institute of Orthopaedic & Musculoskeletal Science, UCL, London, UK
    11:00 | FP01 Nanofibrous materials - Electrospun PNIPAAm-based fibers for pH- and thermo-responsive localized drug releaseSYMP-10Adriana GONÇALVES, CENIMAT | i3N, Department of Materials Science, NOVA SST, Caparica, Portugal
    Miguel CASTILHO, Department of Biomedical Engineering, Technical University of Eindhoven/Department of Orthopedics, University Medical Center Utrecht
    João Paulo BORGES, CENIMAT | i3N, Department of Materials Science
    Paula SOARES, CENIMAT | i3N, Department of Materials Science

    person_pinAdriana GONÇALVES, CENIMAT | i3N, Department of Materials Science, NOVA SST, Caparica, Portugal
    11:05 | FP02 Nanofibrous materials - Topography-induced modulation of cell behaviour by alumina ceramic textilesSYMP-10Deepanjalee DUTTA, Institute for Biophysics, University of Bremen, Otto-Hahn-Allee 1, 28359 Bremen, Germany
    TITINUN NUNTAPRAMOTE, University of Bremen
    KUROSCH REZWAN, University of Bremen
    DOROTHEA BRÜGGEMANN, University of Bremen

    person_pinDeepanjalee DUTTA, Institute for Biophysics, University of Bremen, Otto-Hahn-Allee 1, 28359 Bremen, Germany
    11:10 | FP03 Nanofibrous materials - 3D membrane of electrospun fibers for cell cultureSYMP-10Bénédicte FROMAGER, Institut Européen des Membranes, Univ Montpellier, ENSCM, CNRS, Montpellier, FRANCE

    person_pinBénédicte FROMAGER, Institut Européen des Membranes, Univ Montpellier, ENSCM, CNRS, Montpellier, FRANCE
    09:45 | KL Tissue & Organ engineering - The role of physiologically based kinetic modeling in interpreting the results of in vitro cell-based toxicity assaysSYMP-11Ronette GEHRING, Institute of Risk Assessment Sciences, Utrecht University

    person_pinRonette GEHRING, Institute of Risk Assessment Sciences, Utrecht University, Utrecht, The Netherlands
    10:15 | O1 Tissue & Organ engineering - Porous Polysaccharide-Based Scaffolds Promote Hepatocytes Autoassembly into Functional Spheroids and Improve Survival After Acute Liver Injury in MiceSYMP-11Camille LE GUILCHER, Université Paris Cité, INSERM U1148, Paris, France
    Gregory MERLEN, INSERM U1193, Université Paris-Saclay, Orsay, France
    Alessandra DELLAQUILA, Université Paris Cité, INSERM U1148, Paris, France
    Marie-Noëlle LABOUR, Université Paris Cité, INSERM U1148, Paris, France
    Rachida AID, Université Paris Cité, INSERM U1148, Paris, France
    Thierry TORDJMANN, INSERM U1193, Université Paris-Saclay, Orsay, France
    Didier LETOURNEUR, Université Paris Cité, INSERM U1148, Paris, France
    Teresa SIMON-YARZA, Université Paris Cité, INSERM U1148, Paris, France

    person_pinTeresa SIMON-YARZA, Université Paris Cité, INSERM U1148, Paris, France
    10:30 | O2 Tissue & Organ engineering - Fibrin microgels for dermal papilla cell encapsulation as an alternative to spheroid culturesSYMP-11Cristina QUÍLEZ LÓPEZ, Department of Bioengineering and Aerospace engineering, Universidad Carlos III de Madrid, Leganés, Spain
    Leticia VALENCIA BLANCO, Department of Bioengineering and Aerospace engineering, Universidad Carlos III de Madrid, Leganés, Spain
    Jorge GONZÁLEZ-RICO IRIARTE, Department of Continuum Mechanics and Structural Analysis, Universidad Carlos III de Madrid, Leganés, Spain
    José Luis JORCANO NOVAL, Department of Bioengineering and Aerospace engineering, Universidad Carlos III de Madrid, Leganés, Spain
    Diego VELASCO BAYÓN, Department of Bioengineering and Aerospace engineering, Universidad Carlos III de Madrid, Leganés, Spain

    person_pinCristina QUÍLEZ LÓPEZ, Department of Bioengineering and Aerospace engineering, Universidad Carlos III de Madrid, Leganés, Spain
    10:45 | O3 Tissue & Organ engineering - Hybrid scaffolds to create long-term in vitro co-culture model for targeted treatment of ovarian cancerSYMP-11Elly DE VLIEGHERE, Polymer Chemistry and Biomaterials Group, Centre of Macromolecular Chemistry, Ghent University, Belgium and Cancer Research Institute Ghent (CRIG), Ghent University, Belgium
    Eva BLONDEEL, Department of Human Structure and Repair - Laboratory of Experimental Cancer Research, Ghent University, Belgium and Cancer Research Institute Ghent (CRIG), Ghent University, Belgium
    Nathan CARPENTIER, Polymer Chemistry and Biomaterials Group, Centre of Macromolecular Chemistry, Ghent University, Belgium
    Koen VAN DE VIJVER , Department of Diagnostic Sciences, Ghent University hospital, Belgium and Cancer Research Institute Ghent (CRIG), Ghent University, Belgium
    Sandra VAN VLIERBERGHE, Polymer Chemistry and Biomaterials Group, Centre of Macromolecular Chemistry, Ghent University, Belgium and Cancer Research Institute Ghent (CRIG), Ghent University, Belgium
    Olivier DE WEVER, Department of Human Structure and Repair - Laboratory of Experimental Cancer Research, Ghent University, Belgium and Cancer Research Institute Ghent (CRIG), Ghent University, Belgium

    person_pinElly DE VLIEGHERE, Polymer Chemistry and Biomaterials Group, Centre of Macromolecular Chemistry, Ghent University, Belgium and Cancer Research Institute Ghent (CRIG), Ghent University, Belgium
    11:00 | FP01 Tissue & Organ engineering - Innovative luminescent porous 3D-printed scaffolds based on 13-93B20 bioactive glass and persistent luminescent particles for bone bioengineering. SYMP-11Amel HOUAOUI, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    Agata SZCZODRA, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    Susanna MIETTINEN, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    Laeticia PETIT, Faculty of Engineering and Natural Science, Tampere University, Tampere, Finland
    Jonathan MASSERA, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland

    person_pinAmel HOUAOUI, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    11:05 | FP02 Tissue & Organ engineering - Organo-mineral 3D-printed scaffolds for bone regenerationSYMP-11Baptiste CHARBONNIER, RMeS Lab - INSERM U 1229 - Nantes University, Nantes, France
    Segolène REISS, RMeS Lab - INSERM U 1229 - Nantes University
    Pierre CORRE, RMeS Lab - INSERM U 1229 - Nantes University
    Pierre WEISS, RMeS Lab - INSERM U 1229 - Nantes University

    person_pinBaptiste CHARBONNIER, RMeS Lab - INSERM U 1229 - Nantes University, Nantes, France
    09:45 | KL Nanoparticles & Theranostic - Engineering Conformable Polymeric microMESH for the Delivery of Combination Therapies against GliomasSYMP-12Paolo DECUZZI, Laboratory of Nanotechnology for Precision Medicine

    person_pinPaolo DECUZZI, Laboratory of Nanotechnology for Precision Medicine, Genova, Italy
    10:15 | O1 Nanoparticles & Theranostic - Extracellular Hyperthermia for the treatment of advanced cutaneous melanomaSYMP-12Beatriz SIMÕES, i3N/CENIMAT, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica, Portugal
    Filipe ALMEIDA, i3N/CENIMAT, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica, Portugal
    Paula SOARES, i3N/CENIMAT, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica, Portugal

    person_pinBeatriz SIMÕES, i3N/CENIMAT, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica, Portugal
    10:30 | O2 Nanoparticles & Theranostic - Multifunctional polydopamine nanoparticles as a platform for treating colorectal cancerSYMP-12Alessio CARMIGNANI, Smart Bio-Interfaces, Istituto Italiano di Tecnologia, Viale Rinaldo Piaggio 34, 56025 Pontedera, Italy
    Matteo BATTAGLINI, Smart Bio-Interfaces, Istituto Italiano di Tecnologia, Viale Rinaldo Piaggio 34, 56025 Pontedera, Italy
    Gianni CIOFANI, Smart Bio-Interfaces, Istituto Italiano di Tecnologia, Viale Rinaldo Piaggio 34, 56025 Pontedera, Italy

    person_pinMatteo BATTAGLINI, Smart Bio-Interfaces, Istituto Italiano di Tecnologia, Viale Rinaldo Piaggio 34, 56025 Pontedera, Italy
    10:45 | O3 Nanoparticles & Theranostic - Ultrasound responsive polymer microbubbles for a targeted treatment of thrombotic diseasesSYMP-12Louise FOURNIER, INSERM U1148, LVTS, Université Paris Cité, Bichat Hospital, Paris, France
    Rachida AID, INSERM U1148, LVTS, Université Paris Cité, Bichat Hospital, Paris, France ; UMS34 FRIM, Université de Paris, Paris, France
    Cyrille ORSET, Inserm U1237, CYCERON, Université Caen Normandie, Caen, France
    Olivier COUTURE, Laboratoire d’Imagerie Biomédicale, Sorbonne Université, UMR 7371-U1146, Paris, France
    Denis VIVIEN, Inserm U1237, CYCERON, Université Caen Normandie, Caen, France
    Cédric CHAUVIERRE, INSERM U1148, LVTS, Université Paris Cité, Bichat Hospital, Paris, France

    person_pinLouise FOURNIER, INSERM U1148, LVTS, Université Paris Cité, Bichat Hospital, Paris, France
    11:00 | FP01 Nanoparticles & Theranostic - Cytotoxicity of nitric oxide releasing Pluronic F-127 hydrogel containing silica nanoparticles loaded with cisplatin towards breast cancer cellSYMP-12Amedea BAROZZI SEABRA, Center for Natural and Human Sciences, Federal University of ABC, Santo André, Brazil
    Bianca DE MELO SANTANA, Federal University of ABC (UFABC)
    Joana CLAUDIO PIERETTI, Federal University of ABC (UFABC)
    Rafael NUNES GOMES, Federal University of ABC (UFABC)
    Giselle CERCHIARO, Federal University of ABC (UFABC)

    person_pinAmedea BAROZZI SEABRA, Center for Natural and Human Sciences, Federal University of ABC, Santo André, Brazil
    11:05 | FP02 Nanoparticles & Theranostic - Peptide Mediation of Nanoparticles To Cross The Blood-Brain Barrier – A Platform For Brain Drug DeliverySYMP-12Catarina CHAPARRO, CENIMAT/i3N (Centro de Investigação em Materiais), NOVA School of Science and Technology (FCT-NOVA), Almada, Portugal; Instituto de Medicina Molecular, Faculdade de Medicina da Universidade de Lisboa, Lisboa, Portugal
    Marco CAVACO, Instituto de Medicina Molecular, Faculdade de Medicina da Universidade de Lisboa
    Miguel CASTANHO, Instituto de Medicina Molecular, Faculdade de Medicina da Universidade de Lisboa
    João Paulo BORGES, CENIMAT/i3N (Centro de Investigação em Materiais), NOVA School of Science and Technology (FCT-NOVA)
    Vera NEVES, Instituto de Medicina Molecular, Faculdade de Medicina da Universidade de Lisboa
    Paula I. P. SOARES, CENIMAT/i3N (Centro de Investigação em Materiais), NOVA School of Science and Technology (FCT-NOVA)

    person_pinCatarina CHAPARRO, CENIMAT/i3N (Centro de Investigação em Materiais), NOVA School of Science and Technology (FCT-NOVA), Almada, Portugal; Instituto de Medicina Molecular, Faculdade de Medicina da Universidade de Lisboa, Lisboa, Portugal
    09:45 | KL1 Biohybrid materials - Electrowriting of functional biomaterialsSYMP-13Miguel CASTILHO, Dept. of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, The Netherlands; Inst. for Complex Molecular Systems, Eindhoven University of Technology, Eindhoven, The Netherlands ; Department of Orthopaedics, University Medical Center Utrecht, Utrecht, The Netherlands

    person_pinMiguel CASTILHO, Dept. of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, The Netherlands; Inst. for Complex Molecular Systems, Eindhoven University of Technology, Eindhoven, The Netherlands ; Department of Orthopaedics, University Medical Center Utrecht, Utrecht, The Netherlands, The Netherlands
    10:15 | O1 Biohybrid materials - Yarn of Human Amniotic Membrane Can Be Woven into a Vascular Graft with Clinically-Relevant Mechanical PropertiesSYMP-13Agathe GRÉMARE, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026; CHU Bordeaux, Odontology and Oral Health Department
    Lisa THIBES, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026
    Maude GLUAIS, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026
    Yoann TORRES, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026
    Diane POTART, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026
    Nicolas DA SILVA, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026
    Nathalie DUSSERRE, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026
    Mathilde FÉNÉLON, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026; CHU Bordeaux, Odontology and Oral Health Department
    Loïc SENTILHES, CHU Bordeaux, Obstetrics and Gynecology Department, F-33076 Bordeaux, France
    Sabrina LACOMME, Univ. Bordeaux, CNRS, INSERM, Bordeaux Imaging Center, BIC, UMS 3420, US 4
    Isabelle SVAHN, Univ. Bordeaux, CNRS, INSERM, Bordeaux Imaging Center, BIC, UMS 3420, US 4
    Etienne GONTIER, Univ. Bordeaux, CNRS, INSERM, Bordeaux Imaging Center, BIC, UMS 3420, US 4
    Jean-Christophe FRICAIN, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026; CHU Bordeaux, Odontology and Oral Health Department
    Nicolas L'HEUREUX, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026, Bordeaux, France

    person_pinNicolas L'HEUREUX, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026, Bordeaux, France
    10:30 | O2 Biohybrid materials - Organoids generation in human decellularized extracellular matrixSYMP-13Anastasia PAPOZ, Univ. Grenoble Alpes, CEA, Inserm, IRIG, Biomics, F-38000, Grenoble, France
    Patricia OBEID, Univ. Grenoble Alpes, CEA, Inserm, IRIG, Biomics, F-38000, Grenoble, France
    Delphine FREIDA, Univ. Grenoble Alpes, CEA, Inserm, IRIG, Biomics, F-38000, Grenoble, France
    Frédérique KERMARREC, Univ. Grenoble Alpes, CEA, Inserm, IRIG, Biomics, F-38000, Grenoble, France
    Julia NOVION DUCASSOU , Univ. Grenoble Alpes, INSERM, CEA, UMR BioSanté U1292, CNRS, CEA, FR2048 38000, Grenoble France
    Yohann COUTE, Univ. Grenoble Alpes, INSERM, CEA, UMR BioSanté U1292, CNRS, CEA, FR2048 38000, Grenoble France
    Xavier GIDROL, Univ. Grenoble Alpes, CEA, Inserm, IRIG, Biomics, F-38000, Grenoble, France
    Amandine PITAVAL, Univ. Grenoble Alpes, CEA, Inserm, IRIG, Biomics, F-38000, Grenoble, France

    person_pinAnastasia PAPOZ, Univ. Grenoble Alpes, CEA, Inserm, IRIG, Biomics, F-38000, Grenoble, France
    10:45 | O3 Biohybrid materials - Ice-Templated Collagen-Elastin Scaffolds As Potential Substrates For Lung Alveolar OrganoidsSYMP-13Gengyao WEI, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
    Malavika NAIR, University of Cambridge
    Daniel V. BAX, University of Cambridge
    Ruth E. CAMERON, University of Cambridge
    Serena M. BEST, University of Cambridge

    person_pinGengyao WEI, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
    11:00 | FP01 Biohybrid materials - Quantitative analysis of distribution paxillin and vinculin in osteoblasts and fibroblasts binding to electrospun PMMA fibers based on super-resolution fluorescent images. SYMP-13Krzysztof BERNIAK, Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Cracow, Poland
    Daniel URA, Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Cracow, Poland
    Urszula STACHEWICZ, Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Cracow, Poland

    person_pinKrzysztof BERNIAK, Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Cracow, Poland
    11:05 | FP02 Biohybrid materials - Development Of A Cardiac Bio-prosthesisSYMP-13Jean-Philippe JEHL, Institut Jean Lamour UMR 7198 CNRS / Université de Lorraine, Nancy, France
    Aurelia POERIO, Institut Jean Lamour - University of Lorraine
    Mélanie LOVERA-LEROUX, Institut Jean Lamour - University of Lorraine
    Solenne FLEUTOT, Institut Jean Lamour - University of Lorraine
    João F. MANO, CICECO - Department of chemistry - University of Aveiro
    FRANCK CLEYMAND, Institut Jean Lamour - University of Lorraine

    person_pinJean-Philippe JEHL, Institut Jean Lamour UMR 7198 CNRS / Université de Lorraine, Nancy, France
    11:10 | FP03 Biohybrid materials - Poly(L-lactic acid) and Ceramic Composite Structures for Fully Resorbable Cranial ImplantsSYMP-13Ana GRZESZCZAK, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    Jonas ÅBERG, OssDsign, Uppsala, Sweden
    Cecilia PERSSON, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden

    person_pinAna GRZESZCZAK, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    14:45 | KL Tissue models - Writing 3D In Vitro Models of Human Tendon Within a Biomimetic Fibrillar Support PlatformPSOP-13Rosa MONTEIRO, 3Bs Research Group, University of Minho
    Syeda BAKHT, 3Bs Research Group, University of Minho
    Manuel GOMEZ-FLORIT, 3Bs Research Group, University of Minho
    Rui REIS, 3Bs Research Group, University of Minho
    Rui DOMINGUES, 3B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Braga/Guimarães, Portugal
    Gomes MANUELA, 3Bs Research Group, University of Minho

    person_pinRui DOMINGUES, 3B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Braga/Guimarães, Portugal
    15:15 | O1 Tissue models - Design of 3D bioengineered cardiac tissue models for the evaluation of chemical cardiotoxicityPSOP-13Gianluca CIARDELLI, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy
    Arianna GRIVET-BRANCOT, Politecnico di Torino
    Valeria CHIONO, Politecnico di Torino
    Susanna SARTORI, Politecnico di Torino
    Monica BOFFITO, Politecnico di Torino

    person_pinGianluca CIARDELLI, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy
    15:30 | O2 Tissue models - A Humanized In Vitro Model of Innervated Skin for Transdermal Analgesic TestingPSOP-13Afonso MALHEIRO, Complex Tissue Regeneration Department, MERLN Institute, Maastricht University
    Maria THON, Department of Molecular Cell Biology and Immunology, Amsterdam University Medical Centre, Amsterdam Infection and Immunity Institute, Vrije Universiteit Amsterdam, Amsterdam, The Netherlands
    Ana Filipa LOURENÇO, Complex Tissue Regeneration Department, MERLN Institute, Maastricht University
    Adrian SEIJAS GAMARDO, Complex Tissue Regeneration Department, MERLN Institute, Maastricht University
    Susan GIBBS, Department of Molecular Cell Biology and Immunology, Amsterdam University Medical Centre, Amsterdam Infection and Immunity Institute, Vrije Universiteit Amsterdam, Amsterdam, The Netherlands
    Paul WIERINGA, Complex Tissue Regeneration Department, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, The Netherlands
    Lorenzo MORONI, Complex Tissue Regeneration Department, MERLN Institute, Maastricht University

    person_pinPaul WIERINGA, Complex Tissue Regeneration Department, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, The Netherlands
    15:45 | O3 Tissue models - An in vitro model as a drug testing platform for glaucomaPSOP-13Hannah LAMONT, Institute of Clinical Sciences, University of Birmingham, Edgbaston, Birmingham B15 2TT, UK; School of Chemical Engineering, University of Birmingham, Edgbaston, Birmingham B15 2TT, UK
    Imran MASOOD, University of Birmingham
    Alicia EL HAJ, University of Birmingham
    Liam GROVER, University of Birmingham
    Lisa HILL, University of Birmingham

    person_pinHannah LAMONT, Institute of Clinical Sciences, University of Birmingham, Edgbaston, Birmingham B15 2TT, UK; School of Chemical Engineering, University of Birmingham, Edgbaston, Birmingham B15 2TT, UK
    16:00 | FP01 Tissue models - Microphysiological systems for the study of neurodegenerative diseases in vitroPSOP-13Eleonora DE VITIS, CNR NANOTEC – Institute of Nanotechnology, Lecce, Italy; Università Del Salento, Dipartimento di Matematica e Fisica E. de Giorgi, Lecce, Italy
    Velia LA PESA, IRCCS San Raffaele Scientific Institute
    Francesca GERVASO, CNR-Nanotec, Istituto di Nanotecnologia
    Alessandro ROMANO, IRCCS San Raffaele Scientific Institute
    Angelo QUATTRINI, IRCCS San Raffaele Scientific Institute
    Giuseppe GIGLI, CNR-Nanotec, Istituto di Nanotecnologia e Università del Salento
    Lorenzo MORONI, Maastricht University, Complex Tissue Regeneration
    Alessandro POLINI, CNR-Nanotec, Istituto di Nanotecnologia

    person_pinEleonora DE VITIS, CNR NANOTEC – Institute of Nanotechnology, Lecce, Italy; Università Del Salento, Dipartimento di Matematica e Fisica E. de Giorgi, Lecce, Italy
    16:05 | FP02 Tissue models - Decellularized Fibrilar Matrix for Engineering Organotypic Tumor-stroma 3D BiomodelsPSOP-13Vitor GASPAR, CICECO‐Aveiro Institute of Materials, Aveiro University, Aveiro, Portugal
    Luis FERREIRA, CICECO- Aveiro Institute of Materials University of Aveiro
    Luis MENDES, CICECO- Aveiro Institute of Materials University of Aveiro
    Iola DUARTE, CICECO - Aveiro Institute of Materials University of Aveiro
    João MANO, CICECO - Aveiro Institute of Materials University of Aveiro

    person_pinVitor GASPAR, CICECO‐Aveiro Institute of Materials, Aveiro University, Aveiro, Portugal
    16:10 | FP03 Tissue models - Evaluating the use of synthetic self-assembling peptides to 3D bioprint in vitro cartilage tissue modelsPSOP-13Patricia SANTOS BEATO, Biochemical Engineering, University College London (UCL), London, UK
    Aline MILLER, Chemical Engineering, University of Manchester, Manchester, UK
    Andrew PITSILLIDES, Comparative Biomedical Sciences, The Royal Veterinary College, London, UK
    Ryo TORII, Mechanical Engineering, University College London (UCL), London, UK
    Deepak KALASKAR, Division of Surgery and Interventional Sciences, University College London (UCL), London, UK

    person_pinPatricia SANTOS BEATO, Biochemical Engineering, University College London (UCL), London, UK
    14:45 | KL Protein surface interactions - Competitive Binding and Molecular Crowding Regulate the Cytoplasmic Interactome of Non-Viral Polymeric Gene Delivery VectorsPSOP-14Julien GAUTROT, Queen Mary, University of London
    Aji Alex RAYNOLD, Queen Mary, University of London
    Danyang LI, Queen Mary, University of London

    person_pinJulien GAUTROT, Queen Mary, University of London
    15:15 | O1 Protein surface interactions - Correlation between protein adsorption onto Cu-doped sol-gel coatings and their antibacterial potentialPSOP-14Francisco ROMERO-GAVILÁN, Universitat Jaume I
    Andreia CERQUEIRA, Universitat Jaume I
    Iñaki GARCÍA-ARNÁEZ, Universidad del País Vasco
    Loredana SCALSCHI, Universitat Jaume I
    Begonya VICEDO, Universitat Jaume I
    Mikel AZKARGORTA, CicBiogune
    Félix ELORTZA, CicBiogune
    Mariló GURRUCHAGA, Universidad del País Vasco
    Isabel GOÑI, Universidad del País Vasco
    Julio SUAY, Department of Industrial Systems and Design Engineering, Universitat Jaume I, Castellón, Spain

    person_pinJulio SUAY, Department of Industrial Systems and Design Engineering, Universitat Jaume I, Castellón, Spain
    15:30 | O2 Protein surface interactions - Elastomeric, Bioadhesive and pH-responsive Copolymer Hydrogels Based on Poly(glycerol sebacate) and Poly(ethylene glycol)PSOP-14Mina ALEEMARDANI, Biomaterials and Tissue Engineering Group, Department of Materials Science and Engineering, Kroto Research Institute, The University of Sheffield, Sheffield, UK
    Michael Z TRIKIC, Biomaterials and Tissue Engineering Group, Department of Materials Science and Engineering, Kroto Research Institute, The University of Sheffield, Sheffield, UK
    Nicola H GREEN, 1Biomaterials and Tissue Engineering Group, Department of Materials Science and Engineering, Kroto Research Institute, The University of Sheffield, Sheffield, UK 2Insigneo Institute for in Silico Medicine, The Pam Liversidge Building, Sir Robert Hadfield Building, Mappin Street, Sheffield, UK
    Frederik CLAEYSSENS, 1Biomaterials and Tissue Engineering Group, Department of Materials Science and Engineering, Kroto Research Institute, The University of Sheffield, Sheffield, UK 2Insigneo Institute for in Silico Medicine, The Pam Liversidge Building, Sir Robert Hadfield Building, Mappin Street, Sheffield, UK

    person_pinMina ALEEMARDANI, Biomaterials and Tissue Engineering Group, Department of Materials Science and Engineering, Kroto Research Institute, The University of Sheffield, Sheffield, UK
    15:45 | O3 Protein surface interactions - "Stealth graft polymers for therapeutic mRNA vaccines"PSOP-14Coral GARCIA FERNANDEZ, Group d’Enginyeria de Materials (GEMAT), Intitut Químic de Sarrià, Universidad Ramon Llull, Barcelona, Spain
    CRISTINA FORNAGUERA PUIGVERT, Group d’Enginyeria de Materials (GEMAT), Intitut Químic de Sarrià, Universidad Ramon Llull, Barcelona, Spain
    SALVADOR BORRÓS GÓMEZ, Group d’Enginyeria de Materials (GEMAT), Intitut Químic de Sarrià, Universidad Ramon Llull, Barcelona, Spain

    person_pinCoral GARCIA FERNANDEZ, Group d’Enginyeria de Materials (GEMAT), Intitut Químic de Sarrià, Universidad Ramon Llull, Barcelona, Spain
    16:00 | FP01 Protein surface interactions - Injectable hydrogels for microRNA delivery to promote direct cell reprogramming in cardiac regenerationPSOP-14Elena MARCELLO, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy
    Letizia NICOLETTI, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy
    Camilla PAOLETTI, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy
    Valeria CHIONO, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy

    person_pinElena MARCELLO, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy
    16:05 | FP02 Protein surface interactions - A protein-based multiplex assay to screen osteogenic properties of calcium phosphate biomaterials with inorganic additivesPSOP-14Maria EISCHEN-LOGES, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, Netherlands
    Zeinab TAHMASEBI BIRGANI, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht university
    Yousra ALAOUI SELSOULI, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht university
    Martijn VAN GRIENSVEN, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht university
    Vanessa LAPOINTE, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht university
    Pamela HABIBOVIC, Maastricht university

    person_pinMaria EISCHEN-LOGES, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, Netherlands
    16:10 | FP03 Protein surface interactions - Milk-Derived Extracellular Vesicles for siRNA Delivery into Intestine Mimicking Caco-2 CellsPSOP-14Josepha ROERIG, Pharmaceutical Technology, Medical Faculty, Leipzig University, Germany
    Franziska MITRACH, Pharmaceutical Technology, Medical Faculty, Leipzig University, Germany
    Maximilian SCHMID, Institute of Pharmaceutics and Biopharmaceutics, Heinrich-Heine-University Duesseldorf, Germany
    Michael C. HACKER, Institute of Pharmaceutics and Biopharmaceutics, Heinrich-Heine-University Duesseldorf, Germany
    Christian WÖLK, Pharmaceutical Technology, Medical Faculty, Leipzig University, Germany
    Michaela SCHULZ-SIEGMUND, Pharmaceutical Technology, Medical Faculty, Leipzig University, Germany

    person_pinJosepha ROERIG, Pharmaceutical Technology, Medical Faculty, Leipzig University, Germany
    16:45 | O1 Hydrogels II - Click Chemistry Crosslinked Hydrogel Sealant for Repairing Corneal PerforationsPSOP-15Patrick SHAKARI, Department of Chemistry - Ångström, Macromolecular Chemistry, Uppsala University
    Mahsa Jamadi KHIABANI, Department of Chemistry - Ångström, Macromolecular Chemistry, Uppsala University
    Matilde FOLKESSON, Department of Chemistry - Ångström, Macromolecular Chemistry, Uppsala University
    Jenny ROSENQUIST, Department of Chemistry - Ångström, Macromolecular Chemistry, Uppsala University
    Carlemi CALITZ, Department of Medical Cell Biology, Uppsala University
    Femke HEINDRYCKX, Department of Medical Cell Biology, Uppsala University
    Ayan SAMANTA, Department of Chemistry - Ångström, Macromolecular Chemistry, Uppsala University

    person_pinPatrick SHAKARI, Department of Chemistry - Ångström, Macromolecular Chemistry, Uppsala University, Uppsala, Sweden
    17:00 | O2 Hydrogels II - Influence of hyaluronic acid within biomimetic pulmonary niche on the mesenchymal stem cells differentiation toward mature Type II pneuumocytesPSOP-15Francesca DELLA SALA, Institute of Polymers, Composite and Biomaterials, National Research Council of Italy, Viale J.F. Kennedy 54, 80125 Naples, Italy
    Mario DI GENNARO, Institute of Polymers, Composite and Biomaterials (IPCB), National Research Council (CNR) of Italy
    Gianluca LISTA, Ospedale dei Bambini “Vittore Buzzi” Milan, Italy
    Francesco MESSINA, Ospedale Evangelico Betania, Naples, Italy;
    Luigi AMBROSIO, Institute of Polymers, Composite and Biomaterials (IPCB), National Research Council (CNR) of Italy
    Assunta BORZACCHIELLO, Institute of Polymers, Composite and Biomaterials (IPCB), National Research Council (CNR) of Italy

    person_pinFrancesca DELLA SALA, Institute of Polymers, Composite and Biomaterials, National Research Council of Italy, Viale J.F. Kennedy 54, 80125 Naples, Italy
    17:15 | O3 Hydrogels II - An innovative phyllosilicate-based hydrogel for skin decontamination against chemical warfare agentsPSOP-15Kardelen DURMAZ, IBCP, LBTI, CNRS UMR 5305, Lyon, France
    Magaly MISBACH, LBTI, UMR 5305 (CNRS)
    Jean-Paul SALVI, LBTI, UMR 5305 (CNRS)
    Alix DANOY, LBTI, UMR 5305 (CNRS)
    Bernard VERRIER, LBTI, UMR 5305 (CNRS)
    Jérôme SOHIER, LBTI, UMR 5305 (CNRS)

    person_pinKardelen DURMAZ, IBCP, LBTI, CNRS UMR 5305, Lyon, France
    17:30 | O4 Hydrogels II - Hyaluronan-O-Carboxymethyl Chitosan-based Hydrogels as Delivery Platforms of Osteogenic Factors and Mesenchymal Stem CellsPSOP-15Daniel FERNÁNDEZ-VILLA, 1 Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC), Spain; 2 Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), Spain
    Kyra DE WIT, 1 Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC), Spain
    Luis ROJO, 1 Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC), Spain 2 Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), Spain
    Blanca VÁZQUEZ-LASA, 1 Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC), Spain 2 Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), Spain

    person_pinDaniel FERNÁNDEZ-VILLA, 1 Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC), Spain; 2 Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), Spain
    16:45 | O1 Additive manufacturing - Ceramics Dynamic Molding: a new technology of additive manufacturing for large-size Cranio-Maxillo-Facial orthopedic implantsPSOP-16Ambra PATERLINI, 3Deus Dynamics, Villeurbanne, France
    Célia HALIMI, 3Deus Dynamics
    Julien BARTHÈS, 3Deus Dynamics
    Edwin-Joffrey COURTIAL, 3Deus Dynamics

    person_pinAmbra PATERLINI, 3Deus Dynamics, Villeurbanne, France
    17:00 | O2 Additive manufacturing - Drop-On-Demand Bioprinting From Micro To Macro Scale Using The Acoustic Droplet Ejection PrinciplePSOP-16Stefan JENTSCH, Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
    Horst FISCHER, Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany

    person_pinStefan JENTSCH, Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
    17:15 | O3 Additive manufacturing - Engineering of a Bioartificial Filtration Unit of the Kidney using a Natural PolymerPSOP-16Syed Mohammad Daniel SYED MOHAMED, Department of Materials Science and Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK
    Jack TUFFIN, Bristol Renal, Translational Health Sciences, Bristol Medical School, University of Bristol, Bristol, UK
    Elbaraa ELGHAZY, Department of Materials Science and Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK
    Gavin WELSH, Bristol Renal, Translational Health Sciences, Bristol Medical School, University of Bristol, Bristol, UK
    Ipsita ROY, Department of Materials Science and Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK

    person_pinSyed Mohammad Daniel SYED MOHAMED, Department of Materials Science and Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK
    17:30 | O4 Additive manufacturing - Giving Life to Materials: Tuning bacterial behavior in Pluronic based bioinks for living therapeutic applicationsPSOP-16Shardul BHUSARI, Leibniz Institute for New Materials (INM), Saarbrücken, Germany, Chemistry Department, Saarland University, Saarbrücken, Germany
    Shrikrishnan SANKARAN, Leibniz Institute for New Materials (INM), Saarbrücken, Germany
    Aránzazu DEL CAMPO, Leibniz Institute for New Materials (INM), Saarbrücken, Germany, Chemistry Department, Saarland University, Saarbrücken, Germany

    person_pinShardul BHUSARI, Leibniz Institute for New Materials (INM), Saarbrücken, Germany, Chemistry Department, Saarland University, Saarbrücken, Germany
    16:45 | O1 Cell & Tissue interactions I - A Tissue Engineering Model of Non-Syndromic Craniosynostosis for Identifying Potential Therapeutic Targets that Accelerate Bone RepairPSOP-17Mariangela MEYER, (1) Tissue Engineering Research Group (TERG), Department of Anatomy and Regenerative Medicine, Royal College of Surgeons in Ireland (RCSI), Dublin 2, Ireland. (2) Advanced Materials Bio-Engineering Research Centre (AMBER), RCSI and Trinity College Dublin (TCD), Dublin 2, Ireland.
    Shirley BRACKEN, (3) National Paediatric Craniofacial Centre, Children’s Health Ireland (CHI) at Temple Street, Temple Street, Dublin 1, Ireland.
    Dylan J. MURRAY, (3) National Paediatric Craniofacial Centre, Children’s Health Ireland (CHI) at Temple Street, Temple Street, Dublin 1, Ireland.
    Arlyng GONZÁLEZ-VÁZQUEZ, (1) Tissue Engineering Research Group (TERG), Department of Anatomy and Regenerative Medicine, Royal College of Surgeons in Ireland (RCSI), Dublin 2, Ireland. (2) Advanced Materials Bio-Engineering Research Centre (AMBER), RCSI and Trinity College Dublin (TCD), Dublin 2, Ireland.
    Fergal J. O’BRIEN, (1) Tissue Engineering Research Group (TERG), Department of Anatomy and Regenerative Medicine, Royal College of Surgeons in Ireland (RCSI), Dublin 2, Ireland. (2) Advanced Materials Bio-Engineering Research Centre (AMBER), RCSI and Trinity College Dublin (TCD), Dublin 2, Ireland. (4) Trinity Centre for Bioengineering, TCD, Dublin 2, Ireland.

    person_pinMariangela MEYER, (1) Tissue Engineering Research Group (TERG), Department of Anatomy and Regenerative Medicine, Royal College of Surgeons in Ireland (RCSI), Dublin 2, Ireland. (2) Advanced Materials Bio-Engineering Research Centre (AMBER), RCSI and Trinity College Dublin (TCD), Dublin 2, Ireland.
    17:00 | O2 Cell & Tissue interactions I - High-Throughput Screening to Elucidate Biomaterial-Associated InfectionPSOP-17Lisa TROMP, Department of Biomedical Engineering, W.J. Kolff Institute for Biomedical Engineering and Materials Science, University of Groningen/University Medical Center Groningen, Groningen, The Netherlands
    Torben VAN DER BOON, University Medical Center Groningen

    person_pinLisa TROMP, Department of Biomedical Engineering, W.J. Kolff Institute for Biomedical Engineering and Materials Science, University of Groningen/University Medical Center Groningen, Groningen, The Netherlands
    17:15 | O3 Cell & Tissue interactions I - Transcriptomics Analysis During Early Healing of Rabbit Calvarial Defects; Influence of Scaffold’s MicroarchitecturePSOP-17Julien GUERRERO, University of Zurich, Center of Dental Medicine, Oral Biotechnology & Bioengineering, Zürich, Switzerland.
    Chafik GHAYOR, University of Zurich, Center of Dental Medicine, Oral Biotechnology & Bioengineering, Zürich, Switzerland.
    Indranil BHATTACHARYA, University of Zurich, Center of Dental Medicine, Oral Biotechnology & Bioengineering, Zürich, Switzerland.
    Franz WEBER, University of Zurich, Center of Dental Medicine, Oral Biotechnology & Bioengineering, Zürich, Switzerland. CABMM, Center for Applied Biotechnology and Molecular Medicine, University of Zurich, Zurich, Switzerland

    person_pinJulien GUERRERO, University of Zurich, Center of Dental Medicine, Oral Biotechnology & Bioengineering, Zürich, Switzerland.
    17:30 | O4 Cell & Tissue interactions I - Learning from Cell-Material Interactions to Improve MSC Therapeutic PotentialPSOP-17Nathan LAGNEAU, Nantes Université, Oniris, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Pierre TOURNIER, Nantes Université, Oniris, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Boris HALGAND, Nantes Université, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    François LOLL, Nantes Université, Oniris, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Yves MAUGARS, Nantes Université, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Jérôme GUICHEUX, Nantes Université, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Catherine LE VISAGE, Nantes Université, Oniris, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Vianney DELPLACE, Nantes Université, Oniris, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France

    person_pinNathan LAGNEAU, Nantes Université, Oniris, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    16:45 | O1 Drug delivery I - Nanoparticles drug delivery systems to counteract inflammation on microfluidic-based neurovascular bone unitPSOP-18Estrela NETO, INEB - Instituto Nacional de Engenharia Biomédica, Universidade do Porto, Porto, Portugal; i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal
    Ana MONTEIRO, i3S - institute of investigation and innovation in health / INEB - institute of biomedical engineering / FEUP - Faculty of Engineering University of Porto
    Catarina PEREIRA, i3S - institute of investigation and innovation in health / INEB - institute of biomedical engineering
    Bruno SARMENTO, i3S - institute of investigation and innovation in health / INEB - institute of biomedical engineering/ CESPU - institute of investigationa and advanced formation on health science and technology
    Meriem LAMGHARI, i3S - institute of investigation and innovation in health / INEB - institute of biomedical engineering

    person_pinEstrela NETO, INEB - Instituto Nacional de Engenharia Biomédica, Universidade do Porto, Porto, Portugal; i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal
    17:00 | O2 Drug delivery I - Regioselectively Oxidized Hyaluronate for Enhanced Cisplatin DeliveryPSOP-18Lukáš MÜNSTER, Centre of Polymer Systems, Tomas Bata University in Zlín, Zlín, Czech Republic
    Zdenka CAPAKOVA, Centre of Polymer Systems, Tomas Bata University in Zlín, Zlín, Czech Republic
    Ivo KURITKA, Centre of Polymer Systems, Tomas Bata University in Zlín, Zlín, Czech Republic
    Jan VICHA, Centre of Polymer Systems, Tomas Bata University in Zlín, Zlín, Czech Republic

    person_pinJan VICHA, Centre of Polymer Systems, Tomas Bata University in Zlín, Zlín, Czech Republic
    17:15 | O3 Drug Delivery I - Drug-eluting metals by cold sintering processing: high strength and prolonged drug releasePSOP-18Aliya SHARIPOVA, Department of Material Science and Engineering, Technion – Israel Institute of Technology, Haifa, Israel
    Olga BAKINA, Institute of Strength Physics and Materials Science, SB RAS, Tomsk, Russia
    Alexander LOZHKOMOEV, Institute of Strength Physics and Materials Science, SB RAS, Tomsk, Russia
    Marat LERNER, Institute of Strength Physics and Materials Science, SB RAS, Tomsk, Russia
    Alejandro SOSNIK, Department of Material Science and Engineering, Technion – Israel Institute of Technology, Haifa, Israel

    person_pinAliya SHARIPOVA, Department of Material Science and Engineering, Technion – Israel Institute of Technology, Haifa, Israel
    17:30 | O4 Drug delivery I - Stimulation of Neovascularisation by Controlled Delivery of VEGF using an Implantable Hydrogel Loaded Soft Robotic Drug Delivery SystemPSOP-18Eimear WALLACE, 1. Anatomy and Regenerative Medicine Institute (REMEDI), School of Medicine, College of Medicine Nursing and Health Sciences, National University of Ireland Galway, Ireland, 2. Aurum Laboratories, Explora-Biotech, Rome, Italy
    Lucien SCHREIBER, 1. Anatomy and Regenerative Medicine Institute (REMEDI), School of Medicine, College of Medicine Nursing and Health Sciences, National University of Ireland Galway, Ireland
    Giulia LATTANZI, 1. Anatomy and Regenerative Medicine Institute (REMEDI), School of Medicine, College of Medicine Nursing and Health Sciences, National University of Ireland Galway, Ireland
    Stefania STRAINO, 2. Aurum Laboratories, Explora-Biotech, Rome, Italy
    Francesca CIANFARANI, 2. Aurum Laboratories, Explora-Biotech, Rome, Italy
    Gabriella CIOTTI, 2. Aurum Laboratories, Explora-Biotech, Rome, Italy
    Tapas MITRA, 3. Centre for Research in Medical Devices (CÚRAM), National University of Ireland Galway, Ireland
    Gabriella BELLAVIA, 2. Aurum Laboratories, Explora-Biotech, Rome, Italy
    Garry DUFFY, 1. Anatomy and Regenerative Medicine Institute (REMEDI), School of Medicine, College of Medicine Nursing and Health Sciences, National University of Ireland Galway, Ireland, 3. Centre for Research in Medical Devices (CÚRAM), National University of Ireland Galway, Ireland, 4. Advanced Materials and BioEngineering Research Centre (AMBER), Trinity College Dublin, Ireland

    person_pinEimear WALLACE, 1. Anatomy and Regenerative Medicine Institute (REMEDI), School of Medicine, College of Medicine Nursing and Health Sciences, National University of Ireland Galway, Ireland, 2. Aurum Laboratories, Explora-Biotech, Rome, Italy
    16:45 | O1 Polymer I - Mesenchymal Stem Cells Sense the Toughness of InterfacesPSOP-19Julien GAUTROT, School of Engineering and Materials Science, Queen Mary, University of London, London, United Kingdom
    Lihui PENG, Queen Mary, University of London

    person_pinJulien GAUTROT, School of Engineering and Materials Science, Queen Mary, University of London, London, United Kingdom
    17:00 | O2 Polymer I - Effect of WS2NT on PLLA Microstructure During Bioresorbable Stent Manufacturing ProcessPSOP-19Lison ROCHER, School of Mechanical and Aerospace Engineering, Queen’s University Belfast, UK
    Alex B. LENNON, School of Mechanical and Aerospace Engineering, Queen’s University Belfast, UK
    Gary H. MENARY, School of Mechanical and Aerospace Engineering, Queen’s University Belfast, UK

    person_pinLison ROCHER, School of Mechanical and Aerospace Engineering, Queen’s University Belfast, UK
    17:15 | O3 Polymer I - The Degradation and Encrustation Behaviours of Poly Glycerol Sebacate Citrate in Artificial UrinePSOP-19Lu ZHANG, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
    Ruth CAMERON, University of Cambridge
    Serena BEST, University of Cambridge

    person_pinLu ZHANG, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
    17:30 | O4 Polymer I - Role of Macromolecular Characteristics on the Morphology of Thermosensitive Chitosan HydrogelsPSOP-19Pierre MARQUAILLE, Molecular, Macromolecular Chemistry and Materials, ESPCI Paris, CNRS, PSL University, France// Équipe de Recherche sur les Relations Matrice Extracellulaire-Cellule, CY Cergy Paris Université, France.
    Carla PALOMINO-DURAND, Équipe de Recherche sur les Relations Matrice Extracellulaire-Cellule, CY Cergy Paris Université, France
    Phuong-Anh DANG, Molecular, Macromolecular Chemistry and Materials, ESPCI Paris, CNRS, PSL University, France
    Rachel AUZELY, Centre de Recherches sur les Macromolécules Végétales, CNRS, Université Grenoble Alpes, France
    Raphaël MICHEL, Centre de Recherches sur les Macromolécules Végétales, CNRS, Université Grenoble Alpes, France
    Sonia ORTEGA, Centre de Recherches sur les Macromolécules Végétales, CNRS, Université Grenoble Alpes, France
    Emmanuel PAUTHE, Équipe de Recherche sur les Relations Matrice Extracellulaire-Cellule, CY Cergy Paris Université, France
    Laurent CORTE, Molecular, Macromolecular Chemistry and Materials, ESPCI Paris, CNRS, PSL University, France // Centre des Matériaux, Mines Paris, PSL University, Evry, France
    Sophie NORVEZ, Molecular, Macromolecular Chemistry and Materials, ESPCI Paris, CNRS, PSL University, France

    person_pinPierre MARQUAILLE, Molecular, Macromolecular Chemistry and Materials, ESPCI Paris, CNRS, PSL University, France// Équipe de Recherche sur les Relations Matrice Extracellulaire-Cellule, CY Cergy Paris Université, France.
    09:00 | KL Biomimetics I - Engineered spider silk hybrid proteins with transforming growth factor b3 modulates stem cell response and anticipate new prospects for tendon repairPSOP-20Albina FRANCO, 3B’s Research Group –I3BS Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Braga/Guimarães, Portugal;
    Syeda BAKHT, 3B’s Research Group, University of Minho
    Marcia RODRIGUES, 3B’s Research Group, University of Minho
    Manuel GOMEZ-FLORIT, 3B’s Research Group, University of Minho
    Rui DOMINGUES, 3B’s Research Group, University of Minho
    Isabel LEONOR, 3B’s Research Group, University of Minho
    Rui REIS, 3B’s Research Group, University of Minho
    Manuela GOMES, 3B’s Research Group, University of Minho

    person_pinAlbina FRANCO, 3B’s Research Group –I3BS Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Braga/Guimarães, Portugal;
    09:30 | O1 Biomimetics I - Automated fabrication of biomimetic platforms to present bone morphogenetic proteinsPSOP-20Julius SEFKOW-WERNER, BRM team, Biosanté, IRIG, Cea- Grenoble
    Jean LE PENNEC, BRM team, Biosanté, IRIG, Cea- Grenoble
    Paul MACHILLOT, BRM team, Biosanté, IRIG, Cea- Grenoble
    João LOPES, BRM team, Biosanté, IRIG, Cea- Grenoble
    Antoine DELON, Liphy, UGA Grenoble
    Catherine PICART, BRM team, Biosanté, IRIG, Cea- Grenoble
    Elisa MIGLIORINI, Univ. Grenoble Alpes, CEA, INSERM, U1292 Biosanté, CNRS EMR 5000 BRM, 38000 Grenoble, France

    person_pinElisa MIGLIORINI, Univ. Grenoble Alpes, CEA, INSERM, U1292 Biosanté, CNRS EMR 5000 BRM, 38000 Grenoble, France
    09:45 | O2 Biomimetics I - Combination of Proteolytic Sequences, VEGF-mimetic Peptide and Laminin-derived Peptide for the Spatiotemporal Direction of Angiogenesis and Neurogenesis in Elastin-Like Recombinamer ScaffoldsPSOP-20Fernando GONZÁLEZ-PÉREZ, G.I.R. BIOFORGE, Universidad de Valladolid CIBER-BBN, Valladolid, Spain
    Matilde ALONSO, Bioforge, Universidad de Valladolid
    José Carlos RODRÍGUEZ-CABELLO, Bioforge, Universidad de Valladolid

    person_pinFernando GONZÁLEZ-PÉREZ, G.I.R. BIOFORGE, Universidad de Valladolid CIBER-BBN, Valladolid, Spain
    10:00 | O3 Biomimetics I - Four-axis fabrication of a biocompatible vascular graft mimicking mechanical vessel propertiesPSOP-20Tim TEN BRINK, Department of Complex Tissue Regeneration (CTR)/MERLN Institute for Technology Inspired regenerative Medicine, Maastricht University, Maastricht, The Netherlands
    Kenny VAN KAMPEN, Maastricht University, MERLN Institute for Technology-Inspired Regenerative Medicine, Department of Complex Tissue Regeneration (CTR)
    Carlos MOTA, Maastricht University, MERLN Institute for Technology-Inspired Regenerative Medicine, Department of Complex Tissue Regeneration (CTR)
    Lorenzo MORONI, Maastricht University, MERLN Institute for Technology-Inspired Regenerative Medicine, Department of Complex Tissue Regeneration (CTR)

    person_pinTim TEN BRINK, Department of Complex Tissue Regeneration (CTR)/MERLN Institute for Technology Inspired regenerative Medicine, Maastricht University, Maastricht, The Netherlands
    10:15 | FP01 Biomimetics I - Characterization and Modeling of Functional Gradients for Enabling Tough Biomimetic DevicesPSOP-20Mauricio CRUZ SALDIVAR, Department of Biomechanical Engineering, Faculty of 3mE, Delft University of Technology, Delft, The Netherlands
    Robin P.E. VEEGER, Department of Biomechanical Engineering, Faculty of 3mE, Delft University of Technology, Delft, The Netherlands
    Quentin GROSSMAN, Mechanics of Biological and Bioinspired Materials Laboratory, Department of Aerospace and Mechanical Engineering, University of Liège, Liège, Belgium
    Astrid CANTAMESSA, Mechanics of Biological and Bioinspired Materials Laboratory, Department of Aerospace and Mechanical Engineering, University of Liège, Liège, Belgium
    Davide RUFFONI, Mechanics of Biological and Bioinspired Materials Laboratory, Department of Aerospace and Mechanical Engineering, University of Liège, Liège, Belgium
    Eugeni L. DOUBROVSKI, Faculty of Industrial Design Engineering, Delft University of Technology, Delft, The Netherlands
    Mohammad J. MIRZAALI, Department of Biomechanical Engineering, Faculty of 3mE, Delft University of Technology, Delft, The Netherlands
    Amir A. ZADPOOR, Department of Biomechanical Engineering, Faculty of 3mE, Delft University of Technology, Delft, The Netherlands

    person_pinMauricio CRUZ SALDIVAR, Department of Biomechanical Engineering, Faculty of 3mE, Delft University of Technology, Delft, The Netherlands
    09:00 | KL Biomaterials for cancer - Applications of organoids in bioengineeringPSOP-21Jens PUSCHHOF, Epithelium Microenvironment Interaction Laboratory, Division Microbiome and Cancer, German Cancer Research Center
    Yorick POST, Hubrecht Institute
    Cayetano PLEGUEZUELOS-MANZANO, Hubrecht Institute
    Axel-Rosendahl HUBER, Hubrecht Institute
    Hans CLEVERS, Hubrecht Institute

    person_pinJens PUSCHHOF, Epithelium Microenvironment Interaction Laboratory, Division Microbiome and Cancer, German Cancer Research Center, Heidelberg, Germany
    09:30 | O1 Biomaterials for cancer - Designing a Peptide Hydrogel for Early Detection of CancerPSOP-21Niall MAHON, Department of Materials, Manchester Institute of Biotechnology, 131 Princess Street, Manchester, M1 7DN, UK
    Olga TSIGKOU, University of Manchester
    Elena BICHENKOVA, University of Manchester
    Alberto SAIANI, University of Manchester

    person_pinNiall MAHON, Department of Materials, Manchester Institute of Biotechnology, 131 Princess Street, Manchester, M1 7DN, UK
    09:45 | O2 Biomaterials for Cancer - Patient-derived nanocarriers for precise hyperthermia against glioblastoma multiforme cellsPSOP-21Daniele DE PASQUALE, Smart Bio-Interfaces, Istituto Italiano di Tecnologia, Pontedera (Pisa), 56025 Italy
    Carlotta PUCCI, Italian Institute of Technology
    Gianni CIOFANI, Italian Institute of Technology

    person_pinDaniele DE PASQUALE, Smart Bio-Interfaces, Istituto Italiano di Tecnologia, Pontedera (Pisa), 56025 Italy
    10:00 | O3 Biomaterials for cancer - Reactive Oxygen/Nitrogen Species-Scavenging Hydrogels with Therapeutic Potentials in Triple-Negative Breast Cancer PSOP-21Amir ALSHARABASY, CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland, Galway (NUIG), Ireland
    Pau FARRÀS, School of Biological and Chemical Sciences, Ryan Institute & CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland, Galway (NUIG), Ireland
    Sharon GLYNN, Discipline of Pathology, Lambe Institute for Translational Research & CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland, Galway (NUIG), Ireland
    Abhay PANDIT, CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland, Galway (NUIG), Ireland

    person_pinAmir ALSHARABASY, CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland, Galway (NUIG), Ireland
    10:15 | FP01 Biomaterials for cancer - Multifunctional biomimetic pancreatic cancer cell membrane-camouflaged vitamin E-based prodrug micelles PSOP-21Miguel PEREIRA DA SILVA, Department of Pharmaceutical Technology, Faculty of Pharmacy, University of Coimbra, Coimbra, Portugal
    Alba FERREIRÓS, Nasasbiotech, S.L., Canton Grande 9, 15003 A Coruña, Spain
    Ana Cláudia PAIVA-SANTOS, 1 Department of Pharmaceutical Technology, Faculty of Pharmacy, University of Coimbra, 3000-548 Coimbra, Portugal; 2 REQUIMTE/LAQV, Group of Pharmaceutical Technology, Faculty of Pharmacy, University of Coimbra, 3000-548 Coimbra, Portugal
    Francisco VEIGA, 1 Department of Pharmaceutical Technology, Faculty of Pharmacy, University of Coimbra, 3000-548 Coimbra, Portugal; 2 REQUIMTE/LAQV, Group of Pharmaceutical Technology, Faculty of Pharmacy, University of Coimbra, 3000-548 Coimbra, Portuga
    Angel CONCHEIRO, Departamento de Farmacología, Farmacia y Tecnología Farmacéutica, I+D Farma, Facultad de Farmacia and Health Research Institute of Santiago de Compostela (IDIS), Universidade de Santiago de Compostela, 15782 Santiago de Compostela, Spain
    Carmen ALVAREZ-LORENZO, Departamento de Farmacología, Farmacia y Tecnología Farmacéutica, I+D Farma, Facultad de Farmacia and Health Research Institute of Santiago de Compostela (IDIS), Universidade de Santiago de Compostela, 15782 Santiago de Compostela, Spain

    person_pinMiguel PEREIRA DA SILVA, Department of Pharmaceutical Technology, Faculty of Pharmacy, University of Coimbra, Coimbra, Portugal
    10:20 | FP02 Biomaterials for cancer - A 3D Co-Culture Spheroid Model to Assess the Response of Bone Metastases to Anticancer DrugsPSOP-21Ceri-Anne SUURMOND, Department of Dentistry – Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, Nijmegen, The Netherlands
    Rong WANG, Department of Dentistry, Regenerative Biomaterials, Radboud Institute of Molecular Life Sciences, Radboud University Medical Center
    Jeroen VAN DEN BEUCKEN, Department of Dentistry, Regenerative Biomaterials, Radboud Institute of Molecular Life Sciences, Radboud University Medical Center
    Sander LEEUWENBURGH, Department of Dentistry, Regenerative Biomaterials, Radboud Institute of Molecular Life Sciences, Radboud University Medical Center

    person_pinCeri-Anne SUURMOND, Department of Dentistry – Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, Nijmegen, The Netherlands
    10:25 | FP03 Biomaterials for cancer - Polymeric Nanoparticles Targeting Glycans in Gastric Cancer Cells Under Live Flow ConditionsPSOP-21Francisca DINIZ, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal; ICBAS- Institute of Biomedical Sciences of Abel Salazar, University of Porto, Portugal
    Maria AZEVEDO, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal
    Flávia SOUSA, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal
    Hugo OSÓRIO, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal
    Diana CAMPOS, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal
    Paula SAMPAIO, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal
    Joana GOMES, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal
    Bruno SARMENTO, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal
    Celso A. REIS, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal

    person_pinFrancisca DINIZ, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal; ICBAS- Institute of Biomedical Sciences of Abel Salazar, University of Porto, Portugal
    09:00 | KL1 Sustainability of biomaterials - Sustainability of Additive Manufacturing Technologies to create Smart Scaffolds for Regenerative MedicineESB S.SocietiesLorenzo MORONI, Complex Tissue Regeneration Department, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University

    person_pinLorenzo MORONI, Complex Tissue Regeneration Department, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, The Netherlands
    09:20 | KL2 Sustainability of biomaterials - Sustainable Biomaterials of bacterial origin and their use in Biomedical ApplicationsESB S.SocietiesIpsita ROY, University of Sheffield

    person_pinIpsita ROY, University of Sheffield, Sheffield, United Kingdom
    09:40 | KL3 Sustainability of biomaterials - Are bio-based and circular solutions more sustainable? A scientific perspective to assess environmental, economic and social sustainability of bio-circular options.ESB S.SocietiesMassimo PERUCCA, Project HUB-360
    Sridhar ANEGALLA, Project HUB-360
    Stefania TRUFFA, Project HUB-360

    person_pinMassimo PERUCCA, Project HUB-360, Turin, Italy
    10:00 | O1 Sustainability of biomaterials - From 2D to 3D, challenges for a more sustainable scienceESB S.SocietiesTeresa SIMON YARZA, University Paris Cité, Inserm U1148, Paris, France

    person_pinTeresa SIMON YARZA, University Paris Cité, Inserm U1148, Paris, France
    10:15 | O2 Sustainability of biomaterials - Physiological polyphosphate, a smart nano-/bio-material for tissue regeneration and a prophylactic drug against SARS-CoV-2 infectionESB S.SocietiesWerner MÜLLER, University Medical Center of the Johannes Gutenberg University Mainz, Germany
    Xiaohong PROF. WANG, University Medical Center of the Johannes Gutenberg University Mainz, Germany

    person_pinWerner MÜLLER, University Medical Center of the Johannes Gutenberg University Mainz, Germany
    09:00 | KL Bioprinting technologies - Advances in Light-based Bioprinting: Layerwise and Layerless Volumetric Technologies for Organoid Culture and Tissue EngineeringSYMP-14Riccardo LEVATO, Living Matter Engineering and Biofabrication group, Regenerative Medicine Center Utrecht; Department of Clinical Sciences, Faculty of Veterinary Medicine; Department of Orthopaedics, University Medical Center Utrecht

    person_pinRiccardo LEVATO, Living Matter Engineering and Biofabrication group, Regenerative Medicine Center Utrecht; Department of Clinical Sciences, Faculty of Veterinary Medicine; Department of Orthopaedics, University Medical Center Utrecht, Utrecht, The Netherlands
    09:30 | O1 Bioprinting technologies - Development of Advanced Binary Cell-laden Hydrogels Consisting of Guanosine and Guanosine 5-Monophosphate for the 3D bioprinting of scaffolds for soft tissue defectsSYMP-14Maria GODOY-GALLARDO, Bioengineering Institute of Technology, International University of Catalonia, Sant Cugat del Vallès, Spain
    Maria MERINO-GÓMEZ, Bioengineering Institute of Technology, International University of Catalonia, Sant Cugat del Vallès, Spain
    Miguel A. MATEOS-TIMONEDA, Bioengineering Institute of Technology, International University of Catalonia, Sant Cugat del Vallès, Spain
    F. Javier GIL, Bioengineering Institute of Technology, International University of Catalonia, Sant Cugat del Vallès, Spain; Department of Dentistry, International University of Catalonia, Sant Cugat del Vallès, Spain
    Roman A. PÉREZ, Bioengineering Institute of Technology, International University of Catalonia, Sant Cugat del Vallès, Spain

    person_pinMaria MERINO-GÓMEZ, Bioengineering Institute of Technology, International University of Catalonia, Sant Cugat del Vallès, Spain
    09:45 | O2 Bioprinting technologies - Fabrication of vascularized 3D mammary gland model using hybrid volumetric bioprinting and photoablationSYMP-14Dominic RUETSCHE, Tissue Engineering + Biofabrication Laboratory, Department of Health Sciences and Technology, ETH Zürich, CH- 8093 Zürich, Switzerland
    Riccardo RIZZO, ETH Zurich
    Parth CHANSORIA, ETH Zürich
    Anny WANG, ETH Zurich
    Marcy ZENOBI-WONG, ETH Zürich

    person_pinDominic RUETSCHE, Tissue Engineering + Biofabrication Laboratory, Department of Health Sciences and Technology, ETH Zürich, CH- 8093 Zürich, Switzerland
    10:00 | O3 Bioprinting technologies - Bone Mimetic Composite Biomaterial-Ink combining Hyaluronan, Collagen and Calcium Phosphate Particles for the Delivery of Chemically Modified RNA for Treatment of Bone DefectsSYMP-14Daphne VAN DER HEIDE, AO Research Institute Davos, Davos, Switzerland; Department of Health Science and Technology, ETH Zürich, Zürich, Switzerland
    Elena DELLA BELLA, AO Research Institute Davos
    Huipin YUAN, Kuros Biosciences Bv
    Florence DE GROOT-BARRÈRE, Kuros Biosciences Bv
    Martin STODDART, AO Research Institute Davos
    Matteo D'ESTE, AO Research Institute Davos

    person_pinDaphne VAN DER HEIDE, AO Research Institute Davos, Davos, Switzerland; Department of Health Science and Technology, ETH Zürich, Zürich, Switzerland
    10:15 | FP01 Bioprinting technologies - Multi-Material Approach For The Replacement Of The Temporomandibular Joint SYMP-14Joanna BABILOTTE, Complex Tissue Regeneration department, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, the Netherlands
    Monize CAIADO DECARLI, MERLN Institute for Technology-Inspired Regenerative Medicine
    Amit CHANDRAKAR, MERLN Institute for Technology-Inspired Regenerative Medicine
    Paul WIERINGA, MERLN Institute for Technology-Inspired Regenerative Medicine
    Lorenzo MORONI, MERLN Institute for Technology-Inspired Regenerative Medicine

    person_pinJoanna BABILOTTE, Complex Tissue Regeneration department, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, the Netherlands
    10:20 | FP02 Bioprinting technologies - ECM mimicking hydrogel scaffolds for liver tissue engineering SYMP-14Nathan CARPENTIER, Polymer Chemistry and Biomaterials group, Ghent University, Ghent, Belgium
    Louis VAN DER MEEREN, Nano-biotechnology Laboratory, Ghent university
    Andre SKIRTACH, Nano-biotechnology Laboratory, Ghent university
    Lindsey DEVISSCHER, Gut-Liver Immunopharmacology Unit, Dpt Basic and Applied Medical Sciences, Ghent University
    Hans VAN VLIERBERGHE, Hepatology Research Unit, Dpt Internal Medicine and Paediatrics, Ghent University
    Peter DUBRUEL, Polymer Chemistry and Biomaterials group, Ghent University
    Sandra VAN VLIERBERGHE, Polymer Chemistry and Biomaterials group, Ghent University

    person_pinNathan CARPENTIER, Polymer Chemistry and Biomaterials group, Ghent University, Ghent, Belgium
    10:25 | FP03 Bioprinting technologies - 3D printed, anisotropic, and porous dense collagen hydrogels to model cardiac extracellular matrixSYMP-14Marie CAMMAN, Sorbonne Université, CNRS, UMR 7574, Laboratoire de Chimie de la Matière Condensée de Paris, F-75005 Paris, France/Sorbonne Université, Institut de Biologie Paris-Seine (IBPS), CNRS UMR 8256, Inserm ERL U1164, Biological Adaptation and Ageing, F-75005, Paris, France.
    Pierre JOANNE, Sorbonne Université, Institut de Biologie Paris-Seine (IBPS), CNRS UMR 8256, Inserm ERL U1164, Biological Adaptation and Ageing, F-75005, Paris, France.
    Alba MARCELLAN, Sciences et Ingénierie de la Matière Molle, ESPCI Paris, Université PSL, CNRS, Sorbonne Université, F-75005, Paris, France.
    Julie BRUN, Sciences et Ingénierie de la Matière Molle, ESPCI Paris, Université PSL, CNRS, Sorbonne Université, F-75005, Paris, France.
    Gervaise MOSSER, Sorbonne Université, CNRS, UMR 7574, Laboratoire de Chimie de la Matière Condensée de Paris, F-75005 Paris, France
    Onnik AGBULUT, Sorbonne Université, Institut de Biologie Paris-Seine (IBPS), CNRS UMR 8256, Inserm ERL U1164, Biological Adaptation and Ageing, F-75005, Paris, France.
    Christophe HÉLARY, Sorbonne Université, CNRS, UMR 7574, Laboratoire de Chimie de la Matière Condensée de Paris, F-75005 Paris, France

    person_pinMarie CAMMAN, Sorbonne Université, CNRS, UMR 7574, Laboratoire de Chimie de la Matière Condensée de Paris, F-75005 Paris, France/Sorbonne Université, Institut de Biologie Paris-Seine (IBPS), CNRS UMR 8256, Inserm ERL U1164, Biological Adaptation and Ageing, F-75005, Paris, France.
    09:00 | KL Dynamic materials - Macromolecular design of dynamic hydrogels for tissue engineeringSYMP-15Matthew BAKER, Maastricht University, Maastricht, Netherlands

    person_pinMatthew BAKER, Maastricht University, Maastricht, Netherlands
    09:30 | O1 Dynamic materials - Patient-derived lipid-based magnetic nanovectors: a step forward towards personalized nanomedicineSYMP-15Carlotta PUCCI, Smart Bio-Interfaces, Istituto Italiano di Tecnologia, Pontedera (Pisa), 56025 Italy
    Daniele DE PAQUALE, Italian Institute of Technology
    Gianni CIOFANI, Italian Institute of Technology

    person_pinCarlotta PUCCI, Smart Bio-Interfaces, Istituto Italiano di Tecnologia, Pontedera (Pisa), 56025 Italy
    09:45 | O2 Dynamic materials - Molecular constants of reversible Schiff base formation: How to design dynamic hydrogels from the bottom upSYMP-15Francis MORGAN, Department of Complex Tissue Regeneration, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, Netherlands
    Julia FERNÁNDEZ-PÉREZ, MERLN Institute for Technology-Inspired Regenerative Medicine
    Floor RUITER, MERLN Institute for Technology-Inspired Regenerative Medicine
    Ivo BEEREN, MERLN Institute for Technology-Inspired Regenerative Medicine
    Lorenzo MORONI, MERLN Institute for Technology-Inspired Regenerative Medicine
    Matthew BAKER, MERLN Institute for Technology-Inspired Regenerative Medicine

    person_pinFrancis MORGAN, Department of Complex Tissue Regeneration, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, Netherlands
    10:00 | O3 Dynamic materials - Design of thermo-responsive polypeptide bioconjugates for the treatment of glioblastoma by PDT/RDTSYMP-15Leslie E. DUBRANA, Laboratoire de Chimie des Polymères Organique, (LCPO), UMR 5629, Université de Bordeaux, CNRS, Bordeaux INP, Pessac, France
    Jade SUTTER, Biothérapie des Maladies Génétiques Inflammatoires et Cancers (BMGIC), INSERM U1035, Université de Bordeaux, France
    Charles DUPIN, Biothérapie des Maladies Génétiques Inflammatoires et Cancers (BMGIC), INSERM U1035, Université de Bordeaux, France
    Elisabeth GARANGER, Laboratoire de Chimie des Polymères Organique, (LCPO), UMR 5629, Université de Bordeaux, CNRS, Bordeaux INP, Pessac, France
    Sébastien LECOMMANDOUX, Laboratoire de Chimie des Polymères Organique, (LCPO), UMR 5629, Université de Bordeaux, CNRS, Bordeaux INP, Pessac, France

    person_pinLeslie E. DUBRANA, Laboratoire de Chimie des Polymères Organique, (LCPO), UMR 5629, Université de Bordeaux, CNRS, Bordeaux INP, Pessac, France
    10:15 | O4 Dynamic materials - Mixed Reality for Surgery : A New Tool For Medical DevicesSYMP-15Marc PIUZZI, Lynx Medical, Paris, France
    Stan LARROQUE, Lynx Medical, Paris, France
    Didier LETOURNEUR, INSERM U1148, LVTS, Université Paris Cité, X Bichat hospital, Paris, France
    Patrick NATAF, INSERM U1148, LVTS, Université Paris Cité, X Bichat hospital; Interventional Cardiology Department, APHP, X Bichat hospital, Université Paris Cité, Paris, France

    person_pinMarc PIUZZI, Lynx Medical, Paris, France
    09:00 | KL Multifunctional & Cell-instructive hydrogels - Design of hydrogels using natural macromolecules with improved structural and functional propertiesSYMP-16João F. MANO, University of Aveiro

    person_pinJoão F. MANO, University of Aveiro, Aveiro, Portugal
    09:30 | O1 Multifunctional & Cell-instructive hydrogels - Instructing Engineered Living Tissues from Within using Biophysically and Biochemically Tunable Microbuilding BlocksSYMP-16Tom KAMPERMAN, Dept. of Developmental BioEngineering, Faculty of Science and Technology, Technical Medical Centre, University Twente, Drienerlolaan 5, 7522NB Enschede, The Netherlands
    Niels WILLEMEN, Dept. of Developmental BioEngineering, Faculty of Science and Technology, Technical Medical Centre, University Twente, Drienerlolaan 5, 7522NB Enschede, The Netherlands
    Cindy KELDER, Dept. of Developmental BioEngineering, Faculty of Science and Technology, Technical Medical Centre, University Twente, Drienerlolaan 5, 7522NB Enschede, The Netherlands
    Michelle KOERSELMAN, Dept. of Developmental BioEngineering, Faculty of Science and Technology, Technical Medical Centre, University Twente, Drienerlolaan 5, 7522NB Enschede, The Netherlands
    Malin BECKER, Dept. of Developmental BioEngineering, Faculty of Science and Technology, Technical Medical Centre, University Twente, Drienerlolaan 5, 7522NB Enschede, The Netherlands
    Marcel KARPERIEN, Dept. of Developmental BioEngineering, Faculty of Science and Technology, Technical Medical Centre, University Twente, Drienerlolaan 5, 7522NB Enschede, The Netherlands
    Jeroen LEIJTEN, Dept. of Developmental BioEngineering, Faculty of Science and Technology, Technical Medical Centre, University Twente, Drienerlolaan 5, 7522NB Enschede, The Netherlands

    person_pinNiels WILLEMEN, Dept. of Developmental BioEngineering, Faculty of Science and Technology, Technical Medical Centre, University Twente, Drienerlolaan 5, 7522NB Enschede, The Netherlands
    09:45 | O2 Multifunctional & Cell-instructive hydrogel - A composite elastin derivative-based matrix for bone tissue engineering.SYMP-16Nadia MAHMOUDI, BioIngenierie Tissulaire (BioTis), Inserm U1026, University of Bordeaux, Bordeaux, France
    Bruno PAIVA DOS SANTOS, BioIngenierie Tissulaire (BioTis), Inserm U1026, University of Bordeaux, Bordeaux, France
    Hugo DE OLIVEIRA, BioIngenierie Tissulaire (BioTis), Inserm U1026, University of Bordeaux, Bordeaux, France
    Elisabeth GARANGER, Univ. Bordeaux, CNRS, Bordeaux INP, LCPO, UMR 5629, Pessac, France
    Sebastien LECOMMANDOUX, Univ. Bordeaux, CNRS, Bordeaux INP, LCPO, UMR 5629, Pessac, France
    Bertrand GARBAY, Univ. Bordeaux, CNRS, Bordeaux INP, LCPO, UMR 5629, Pessac, France
    Joëlle AMÉDÉE, BioIngenierie Tissulaire (BioTis), Inserm U1026, University of Bordeaux, Bordeaux, France

    person_pinNadia MAHMOUDI, BioIngenierie Tissulaire (BioTis), Inserm U1026, University of Bordeaux, Bordeaux, France
    10:00 | O3 Multifunctional & Cell-instructive hydrogels - Optimized allyl-modified gelatin hydrogel for 3D cell culture of primary human umbilical vein endothelial cells and dermal fibroblastsSYMP-16Alessandro CIANCIOSI, Department of Functional Materials in Medicine and Dentistry at the Institute of Functional Materials and Biofabrication (IFB), University of Würzburg and KeyLab Polymers for Medicine of the Bavarian Polymer Institute (BPI), Würzburg, Germany
    Hatice GENÇ, Section of Experimental Oncology and Nanomedicine (SEON), Else Kröner-Fresenius-Stiftung-Endowed Professorship for Nanomedicine, Department of Otorhinolaryngology, Head and Neck Surgery, University Hospital Erlangen, Friedrich-Alexander-Universität Erlangen-Nu?rnberg
    Tomasz JÜNGST, Department of Functional Materials in Medicine and Dentistry at the Institute of Functional Materials and Biofabrication (IFB), University of Würzburg and KeyLab Polymers for Medicine of the Bavarian Polymer Institute (BPI)
    Iwona CICHA, Section of Experimental Oncology and Nanomedicine (SEON), Else Kröner-Fresenius-Stiftung-Endowed Professorship for Nanomedicine, Department of Otorhinolaryngology, Head and Neck Surgery, University Hospital Erlangen, Friedrich-Alexander-Universität Erlangen-Nu?rnberg
    Jürgen GROLL, Department of Functional Materials in Medicine and Dentistry at the Institute of Functional Materials and Biofabrication (IFB), University of Würzburg and KeyLab Polymers for Medicine of the Bavarian Polymer Institute (BPI)

    person_pinAlessandro CIANCIOSI, Department of Functional Materials in Medicine and Dentistry at the Institute of Functional Materials and Biofabrication (IFB), University of Würzburg and KeyLab Polymers for Medicine of the Bavarian Polymer Institute (BPI), Würzburg, Germany
    10:15 | FP01 Multifunctional & Cell-instructive hydrogels - Development of a 3D polysaccharide porous membrane for the modelling of the outer blood retina barrier SYMP-16Chloé DUJARDIN, Université Paris Cité, INSERM U1148, Paris, France
    Paola APRILE, Université Paris Cité, INSERM U1148, Paris, France
    Walter HABELER, I-Stem, Institute for Stem Cell Therapy and Exploration of Monogenic Diseases, Corbeil-Essonnes, France
    Christelle MONVILLE, I-Stem, Institute for Stem Cell Therapy and Exploration of Monogenic Diseases, Corbeil-Essonnes, France
    Didier LETOURNEUR, Université Paris Cité, INSERM U1148, Paris, France
    Teresa SIMON-YARZA, Université Paris Cité, INSERM U1148, Paris, France

    person_pinChloé DUJARDIN, Université Paris Cité, INSERM U1148, Paris, France
    10:20 | FP02 Multifunctional & Cell-instructive hydrogels - Tuning the Physical Properties of Collagen/Hyaluronan Hydrogels to favor Mesenchymal Stem Cells Differentiation into NP Cells: A Step forwards Intervertebral Disc RegenerationSYMP-16Antoine FRAYSSINET, Sorbonne University, CNRS, UMR 7574 – Chemistry of Condensed Matter Laboratory
    Esther POTIER, Université de Paris - CNRS – Hôpital Lariboisière - B3OA
    Gervaise MOSSER, Sorbonne University, CNRS, UMR 7574 – Chemistry of Condensed Matter Laboratory
    Christophe HÉLARY, Sorbonne University, CNRS, UMR 7574 – Chemistry of Condensed Matter Laboratory - F-75005 Paris, France

    person_pinChristophe HÉLARY, Sorbonne University, CNRS, UMR 7574 – Chemistry of Condensed Matter Laboratory - F-75005 Paris, France
    10:25 | FP03 Multifunctional & Cell-instructive hydrogels - Critical aspects of Ti-based bulk metallic glasses for dental implant manufacturing SYMP-16Laurabelle GAUTIER, 1 MATEIS UMR CNRS 5510, INSA Lyon, Université Claude Bernard Lyon 1, 7 Av. Jean Capelle, F-69621, Villeurbanne, France
    Claire GAILLARD, MATEIS UMR CNRS 5510, INSA Lyon, Université Claude Bernard Lyon 1
    Benoît TER-OVANESSIAN, MATEIS UMR CNRS 5510, INSA Lyon, Université Claude Bernard Lyon 1
    Damien FABRÈGUE, MATEIS UMR CNRS 5510, INSA Lyon, Université Claude Bernard Lyon 1
    Jérôme CHEVALIER, MATEIS UMR CNRS 5510, INSA Lyon, Université Claude Bernard Lyon 1

    person_pinLaurabelle GAUTIER, 1 MATEIS UMR CNRS 5510, INSA Lyon, Université Claude Bernard Lyon 1, 7 Av. Jean Capelle, F-69621, Villeurbanne, France
    11:00 | O1 Biomimetics II - Development of a biomimetic stem cell scaffold system for spinal cord applicationsPSOP-22Cian O'CONNOR, Tissue Engineering Research Group, Dept of Anatomy & Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland & Advanced Materials & Bioengineering Research Centre, Trinity College Dublin, Dublin, Ireland
    Ian WOODS, Tissue Engineering Research Group, Dept of Anatomy & Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland & Advanced Materials and Bioengineering Research Centre, Trinity College Dublin, Dublin, Ireland
    Sean KERR, Tissue Engineering Research Group, Dept of Anatomy & Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland
    Adrian DERVAN, Tissue Engineering Research Group, Dept of Anatomy & Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland & Advanced Materials and Bioengineering Research Centre, Trinity College Dublin, Dublin, Ireland
    Fergal J. O'BRIEN, Tissue Engineering Research Group, Dept of Anatomy & Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland & Advanced Materials and Bioengineering Research Centre, Trinity College Dublin, Dublin, Ireland

    person_pinCian O'CONNOR, Tissue Engineering Research Group, Dept of Anatomy & Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland & Advanced Materials & Bioengineering Research Centre, Trinity College Dublin, Dublin, Ireland
    11:15 | O2 Biomimetics II - Microfabrication of Collagen Particles as Biomaterial Building Blocks for Bottom-Up Bone Tissue EngineeringPSOP-22Esra GÜBEN KAÇMAZ, Department of Instructive Biomaterials Engineering, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Universiteitssingel 40, 6229 ER Maastricht, Netherlands
    Zeinab (Niloofar) TAHMASEBI BIRGANI, PhD
    Pamela HABIBOVIC, Prof. Dr.
    Roman TRUCKENMÜLLER, Prof. Dr.

    person_pinEsra GÜBEN KAÇMAZ, Department of Instructive Biomaterials Engineering, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Universiteitssingel 40, 6229 ER Maastricht, Netherlands
    11:30 | O3 Biomimetics II - Beyond RGD; nanoclusters of syndecan- and integrin-binding ligands synergistically enhances cell/material interactionsPSOP-22Daniel HEATH, Department of Biomedical Engineering, University of Melbourne, Parkville, Australia

    person_pinDaniel HEATH, Department of Biomedical Engineering, University of Melbourne, Parkville, Australia
    11:45 | O4 Biomimetics II - Designing injectable and functional graphene oxide (GO) – self-assembling peptide hybrid hydrogels for biomedical applicationsPSOP-22Cosimo LIGORIO, University of Manchester
    Aravind VIJAYARAGHAVAN, University of Manchester
    Judith HOYLAND, University of Manchester
    Alberto SAIANI, Department of Materials, University of Manchester, Manchester, UK; Manchester Institute of Biotechnology, University of Manchester, Manchester, UK

    person_pinAlberto SAIANI, Department of Materials, University of Manchester, Manchester, UK; Manchester Institute of Biotechnology, University of Manchester, Manchester, UK
    11:00 | O1 Cell & Bacteria interactions - From laboratory scale to commercialization – Conception and evaluation for a virucidal surgical mask during the COVID-19 pandemic (Cidaltex®)PSOP-23Nicolas BLANCHEMAIN, Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems, Lille, France
    Mickael MATON, Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems, Lille, France
    Gaetan GERBER, Bioserenity, 47 bd de l’Hôpital, Paris, France
    Michele VIALETTE, Institut Pasteur de Lille, Unité de Sécurité Microbiologique, 1 rue du Professeur Calmette, Lille, France
    Camille SACAREAU, Institut Pasteur de Lille, Unité de Sécurité Microbiologique, 1 rue du Professeur Calmette, Lille, France
    Anthony PINON, Institut Pasteur de Lille, Unité de Sécurité Microbiologique, 1 rue du Professeur Calmette, Lille, France
    Pascal ODOU, Univ. Lille, CHU Lille, ULR 7365 - GRITA - Groupe de Recherche sur les formes Injectables et les Technologies Associées, F-59000 Lille
    Chrsitel NEUT, Univ. Lille, INSERM, CHU Lille, U1286, Institute for Translational Research in Inflammation, Lille, France
    Bernard MARTEL, Univ. Lille, CNRS, INRAE, ENSCL UMR 8207, UMET – Unité Matériaux et Transformations, Lille, France

    person_pinNicolas BLANCHEMAIN, Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems, Lille, France
    11:15 | O2 Cell & Bacteria interactions - Metallic Glass systems for biomedical applicationsPSOP-23Elham SHARIFIKOLOUEI, Department of Applied Science and Technology, Politecnico di Torino, Turin, Italy
    Baran SARAC, Erich Schmid Institute of Materials Science, Austrian Academy of Sciences
    Ziba NAJMI, Center for Translational Research on Autoimmune and Allergic Diseases ? CAAD, Università del Piemonte Orientale UPO, Vercelli VC, Italie
    Andrea COCHIS, Center for Translational Research on Autoimmune and Allergic Diseases ? CAAD, Università del Piemonte Orientale UPO
    Alessandro Calogero SCALIA, Center for Translational Research on Autoimmune and Allergic Diseases ? CAAD, Università del Piemonte Orientale UPO
    Maryam ALIABADI, German Institutes of Textile and Fiber Research, Denkendorf, Germany
    Sergio PERRERO, Politecnico di Torino (POLITO)
    Lia RIMONDINI, Center for Translational Research on Autoimmune and Allergic Diseases ? CAAD, Università del Piemonte Orientale UPO

    person_pinZiba NAJMI, Center for Translational Research on Autoimmune and Allergic Diseases ? CAAD, Università del Piemonte Orientale UPO, Vercelli VC, Italie
    11:30 | O3 Cell & Bacteria interactions - Controlling blood-material interaction and osseointegration potential by tuning the composition of amorphous metalsPSOP-23William LACKINGTON, Laboratory for Biointerfaces, Empa, Swiss Federal Laboratories for Materials Science and Technology, Switzerland
    Romy WIESTNER, Laboratory for Biointerfaces, Empa, Swiss Federal Laboratories for Materials Science and Technology, Switzerland
    Elena PRADERVAND, Laboratory of Metal Physics and Technology, ETH Zurich, Switzerland
    Martina CIHOVA, Laboratory of Metal Physics and Technology, ETH Zurich, Switzerland
    Eike MÜLLER, Laboratory for Biointerfaces, Empa, Swiss Federal Laboratories for Materials Science and Technology, Switzerland
    Yashoda CHANDORKAR, Laboratory for Biointerfaces, Empa, Swiss Federal Laboratories for Materials Science and Technology, Switzerland
    Mihai STOICA, Laboratory of Metal Physics and Technology, ETH Zurich, Switzerland
    Katharina MANIURA, Laboratory for Biointerfaces, Empa, Swiss Federal Laboratories for Materials Science and Technology, Switzerland
    Jörg F. LÖFFLER, Laboratory of Metal Physics and Technology, ETH Zurich, Switzerland
    Markus ROTTMAR, Laboratory for Biointerfaces, Empa, Swiss Federal Laboratories for Materials Science and Technology, St Galen, Switzerland

    person_pinMarkus ROTTMAR, Laboratory for Biointerfaces, Empa, Swiss Federal Laboratories for Materials Science and Technology, St Galen, Switzerland
    11:45 | O4 Cell & Bacteria interactions - Poly-L-Lysine and Human Plasmatic Fibronectin Films as Bifunctional Coatings to Reduce Bacterial Adhesion and Enhance Tissue IntegrationPSOP-23Anamar MIRANDA , Equipe de Recherche sur les Relations Matrice Extracellulaire Cellules, Institut des Matériaux, CY Cergy-Paris Université, Cergy-Pontoise, France
    Damien SEYER, CY Cergy Paris Université - ERRMECe
    Carla PALOMINO-DURAND, CY Cergy Paris Université - ERRMECe
    Houda MORAKCHI-GOUDJIL, CY Cergy Paris Université - ERRMECe
    Mathilde MASSONIE, CY Cergy Paris Université - ERRMECe
    Rémy AGNIEL, CY Cergy Paris Université - ERRMECe
    Hassan RAMMAL, EFOR Healthcare Paris
    Emmanuel PAUTHE, CY Cergy Paris Université - ERRMECe
    Adeline GAND, CY Cergy Paris Université - ERRMECe

    person_pinAnamar MIRANDA , Equipe de Recherche sur les Relations Matrice Extracellulaire Cellules, Institut des Matériaux, CY Cergy-Paris Université, Cergy-Pontoise, France
    11:00 | O1 Hydrogels III - Enzyme-controlled, nutritive hydrogel for mesenchymal stromal cell survival and paracrine functionsPSOP-24Cyprien DENOEUD, Université de Paris, B3OA CNRS 7052 INSERM U1271, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France.
    Guotian LUO, Université de Paris, B3OA CNRS 7052 INSERM U1271, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France.
    Pauline WOSINSKI, Université de Paris, B3OA CNRS 7052 INSERM U1271, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France.
    Julie BOISSELIER, Biomaterials for Health Research Group, ERRMECe, Équipe de recherche sur les Relations Matrice Extracellulaire-Cellules (EA1391), Institut des matériaux I-MAT (FD4122), CY Tech, CY Cergy Paris Université, Maison Internationale de la Recherche (MIR), Cergy, France.
    Adrien MOYA, Université de Paris, B3OA CNRS 7052 INSERM U1271, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France.
    Ahmad Moustapha DIALLO, Université de Paris, B3OA CNRS 7052 INSERM U1271, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France.
    Stéphane MARINESCO, Centre de Recherche en Neuroscience de Lyon, TIGER team et plateforme technique AniRA-Beliv, Inserm U2018, CNRS 5292, Université Lyon 1, Lyon, France.
    Anne MEILLER, Centre de Recherche en Neuroscience de Lyon, TIGER team et plateforme technique AniRA-Beliv, Inserm U2018, CNRS 5292, Université Lyon 1, Lyon, France.
    Hilel MOUSSI, Université de Paris, B3OA CNRS 7052 INSERM U1271, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France.
    Pierre BECQUART, Université de Paris, B3OA CNRS 7052 INSERM U1271, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France.
    Jean-Thomas VILQUIN, Sorbonne Université, INSERM, AIM, Centre de Recherche en Myologie, UMRS 974, AP-HP, Hôpital Pitié Salpêtrière, 75013, Paris, France
    Adeline GAND, Biomaterials for Health Research Group, ERRMECe, Équipe de recherche sur les Relations Matrice Extracellulaire-Cellules (EA1391), Institut des matériaux I-MAT (FD4122), CY Tech, CY Cergy Paris Université, Maison Internationale de la Recherche (MIR), Cergy, France.
    Delphine LOGEART-AVRAMOGLOU, Université de Paris, B3OA CNRS 7052 INSERM U1271, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France.
    Véronique LARRETA-GARDE, Biomaterials for Health Research Group, ERRMECe, Équipe de recherche sur les Relations Matrice Extracellulaire-Cellules (EA1391), Institut des matériaux I-MAT (FD4122), CY Tech, CY Cergy Paris Université, Maison Internationale de la Recherche (MIR), Cergy, France.
    Emmanuel PAUTHE, Biomaterials for Health Research Group, ERRMECe, Équipe de recherche sur les Relations Matrice Extracellulaire-Cellules (EA1391), Institut des matériaux I-MAT (FD4122), CY Tech, CY Cergy Paris Université, Maison Internationale de la Recherche (MIR), Cergy, France.
    Esther POTIER, Université de Paris, B3OA CNRS 7052 INSERM U1271, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France.
    Hervé PETITE, Université de Paris, B3OA CNRS 7052 INSERM U1271, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France.

    person_pinPauline WOSINSKI, Université de Paris, B3OA CNRS 7052 INSERM U1271, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France.
    11:15 | O2 Hydrogels III - Designing PEG-Peptide Copolymer Hydrogel for Biomedical Applications PSOP-24Andong LIU, The University of Manchester
    Lu-shin WONG , The University of Manchester
    Aline MILLER, The University of Manchester
    Alberto SAIANI, The University of Manchester

    person_pinAndong LIU, The University of Manchester
    11:30 | O3 Hydrogels III - Tuning viscoelasticity in colloidal nanoparticle hydrogels towards enhanced cell activityPSOP-24Pascal BERTSCH, Radboud University Medical Center, Regenerative Biomaterials, Nijmegen, The Netherlands
    Lea ANDRÉE, Radboud University Medical Center, Regenerative Biomaterials, Nijmegen, The Netherlands
    Negar HASSANI BESHELI, Radboud University Medical Center, Regenerative Biomaterials, Nijmegen, The Netherlands
    Sander LEEUWENBURGH, Radboud University Medical Center, Regenerative Biomaterials, Nijmegen, The Netherlands

    person_pinPascal BERTSCH, Radboud University Medical Center, Regenerative Biomaterials, Nijmegen, The Netherlands
    11:45 | O4 Hydrogels III - A multifunctional and programmable micro-platform for localized tumor invasion studiesPSOP-24Pouyan BOUKANY, Department of Chemical Engineering, Delft university of technology, Delft, The Netherlands
    Liu QIAN, Guangzhou Laboratory
    ten Dijke PETER, Leiden University Medical Center

    person_pinPouyan BOUKANY, Department of Chemical Engineering, Delft university of technology, Delft, The Netherlands
    11:00 | O1 Cell & Tissue interactions II - Single Cell Artificial Niches (SCANs) to study mechanotransduction guiding stem cell fate PSOP-25Castro JOHNBOSCO, Leijten Lab, Dept. of Developmental BioEngineering, TechMed Centre, University of Twente, The Netherlands

    person_pinCastro JOHNBOSCO, Leijten Lab, Dept. of Developmental BioEngineering, TechMed Centre, University of Twente, The Netherlands
    11:15 | O2 Cell & Tissue interactions II - The Role of Vascularization in Adhesion to Biological TissuesPSOP-25Estelle PALIERSE, Chimie Moléculaire, Macromoléculaire et Matériaux, ESPCI Paris, PSL University, Paris, France
    Maïlie ROQUART, Centre des Matériaux, Mines Paris, PSL University, Evry, France ; Chimie Moléculaire, Macromoléculaire et Matériaux, ESPCI Paris, PSL University, Paris, France
    Mylène SEBAGH, Service d’Anatomie et cytologie pathologiques, Hôpital Bicêtre, APHP, Le Kremlin-Bicêtre, France
    Mathieu MANASSERO, Biologie, Bioingénierie et Bioimagerie Ostéo-Articulaires, CNRS, Paris, France ; Service de chirurgie, École Nationale Vétérinaire de Maisons-Alfort, Maisons-Alfort, France
    Sophie NORVEZ, Chimie Moléculaire, Macromoléculaire et Matériaux, ESPCI Paris, PSL University, Paris, France
    Laurent CORTÉ, Centre des Matériaux, Mines Paris, PSL University, Evry, France ; Chimie Moléculaire, Macromoléculaire et Matériaux, ESPCI Paris, PSL University, Paris, France

    person_pinEstelle PALIERSE, Chimie Moléculaire, Macromoléculaire et Matériaux, ESPCI Paris, PSL University, Paris, France
    11:30 | O3 Cell & Tissue interactions II - 3D-bioprinted bionic pancreas as an innovative method of treating and preventing diabetes - how far we are from clinical application?PSOP-25Michał WSZOłA, Polbionica Ltd; Foundation of Research and Science Development; CM Medispace, Warsaw, Poland

    person_pinMichał WSZOłA, Polbionica Ltd; Foundation of Research and Science Development; CM Medispace, Warsaw, Poland
    11:00 | O1 Drug delivery II - Immunotoxicity caused by near-infrared light-responsive nanoparticles on the integrity of the blood-brain barrier PSOP-26Akhilesh RAI, Faculty of Medicine, University of Coimbra, Portugal
    Rafaela FERRAO, Center for Neuroscience and Cell Biology, University of Coimbra, Portugal

    person_pinAkhilesh RAI, Faculty of Medicine, University of Coimbra, Portugal
    11:15 | O2 Drug delivery II - An eye-drop formulation of Fas-mediated apoptosis inhibitor attenuates age-related macular degenerationPSOP-26Seon-Hong PYUN, Hanyang University
    You-Jong LEE, Hanyang University
    Eun-Hwa KANG, Hanyang University
    Taiyoun RHIM, Hanyang University
    Sang-Kyung LEE, Department of Bioengineering and BK21 FOUR Education and Research Group for Biopharmaceutical Innovation Leader, Hanyang University, Seoul

    person_pinSang-Kyung LEE, Department of Bioengineering and BK21 FOUR Education and Research Group for Biopharmaceutical Innovation Leader, Hanyang University, Seoul
    11:30 | O3 Drug Delivery II - Glucose Promotes Transplanted Human Mesenchymal Stromal Cell Paracrine Function Pertinent To AngiogenesisPSOP-26Guotian LUO, Université de Paris, CNRS, INSERM, B3OA, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France
    Cyprien DENOEUD, Université de Paris, CNRS, INSERM, B3OA, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France
    Pauline WOSINSKI, Université de Paris, CNRS, INSERM, B3OA, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France
    Nathanaël LAROCHETTE, Université de Paris, CNRS, INSERM, B3OA, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France
    Morad BENSIDHOUM, Université de Paris, CNRS, INSERM, B3OA, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France
    Esther POTIER, Université de Paris, CNRS, INSERM, B3OA, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France
    Hervé PETITE, Université de Paris, CNRS, INSERM, B3OA, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France

    person_pinPauline WOSINSKI, Université de Paris, CNRS, INSERM, B3OA, Paris, France & Ecole Nationale Vétérinaire d'Alfort, B3OA, Maisons-Alfort, France
    11:45 | O4 Drug delivery II - A Biomaterial Drug-Eluting Composite for Reducing Post-Surgical Inflammation and Fibrosis in GlaucomaPSOP-26Mark LEMOINE, 1. Tissue Engineering Research Group, Dept of Anatomy and Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland.
    Nina POHLER, 1. Tissue Engineering Research Group, Dept of Anatomy and Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland.
    Zulal DEMIR, 1. Tissue Engineering Research Group, Dept of Anatomy and Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland.
    Colm O'BRIEN, 2. Institute of Ophthalmology, Mater Misericordiae University Hospital, Dublin, Ireland.
    Fergal O'BRIEN, 1. Tissue Engineering Research Group, Dept of Anatomy and Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland.
    Alan HIBBITTS, 1. Tissue Engineering Research Group, Dept of Anatomy and Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland.

    person_pinAlan HIBBITTS, 1. Tissue Engineering Research Group, Dept of Anatomy and Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland.
    11:00 | O1 Polymer II - Optimization and characterization of Gellan Gum/Alginate microspheres produced via coaxial airflowPSOP-27Henrique CARRÊLO, Departamento de Ciência dos Materiais, CENIMAT/I3N, NOVA/FCT, Almada, Portugal
    Teresa CIDADE, NOVA/FCT
    Paulo BORGES, NOVA/FCT
    Paula SOARES, NOVA/FCT

    person_pinHenrique CARRÊLO, Departamento de Ciência dos Materiais, CENIMAT/I3N, NOVA/FCT, Almada, Portugal
    11:15 | O2 Polymer II - Increasing birefringence in 3D printed PLLA single layersPSOP-27Luke MALONE, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
    David ROPER, University of Cambridge
    Serena BEST, University of Cambridge
    Ruth CAMERON, University of Cambridge

    person_pinLuke MALONE, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
    11:30 | O3 Polymer II - Biodegradable PLA-PEU-PLA membranes: A new solution for the reduction of post-operative peritendinous adhesionsPSOP-27Hadda ZEBIRI, Institute of Biomolecules Max Mousseron
    Hélène VAN DEN BERGHE, Polymers for Health and Biomaterials/IBMM/Univ Montpellier, France
    Pierre-Emmanuel CHAMMAS, CHU Lapeyronie Montpellier
    Michel CHAMMAS, CHU Lapeyronie Montpellier
    Xavier GARRIC, Institute of Biomolecules Max Mousseron

    person_pinHélène VAN DEN BERGHE, Polymers for Health and Biomaterials/IBMM/Univ Montpellier, France
    11:45 | O4 Polymer II - Designing Photo-responsive Double Network Hydrogels for Tissue EngineeringPSOP-27Ana Agustina ALDANA, Department of Complex Tissue Regeneration, MERLN Institute for Technology Inspired Regenerative Medicine, Maastricht University, P.O. Box 616, 6200 MD Maastricht, The Netherlands
    Lex BECKER, Department of Complex Tissue Regeneration, MERLN Institute for Technology Inspired Regenerative Medicine, Maastricht University
    Jurica BAUER, MERLN Institute for Technology Inspired Regenerative Medicine, Maastricht University
    Lorenzo MORONI, Department of Complex Tissue Regeneration, MERLN Institute for Technology Inspired Regenerative Medicine, Maastricht University
    Matthew BAKER, Department of Complex Tissue Regeneration, MERLN Institute for Technology Inspired Regenerative Medicine, Maastricht University

    person_pinAna Agustina ALDANA, Department of Complex Tissue Regeneration, MERLN Institute for Technology Inspired Regenerative Medicine, Maastricht University, P.O. Box 616, 6200 MD Maastricht, The Netherlands
    P1 - Bioceramics and bioactive glasses - Innovative luminescent porous 3D-printed scaffolds based on 13-93B20 bioactive glass and persistent luminescent particles for bone bioengineering. Bioceramics and bioactive glassesAmel HOUAOUI, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    Agata SZCZODRA, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    Susanna MIETTINEN, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    Laeticia PETIT, Faculty of Engineering and Natural Science, Tampere University, Tampere, Finland
    Jonathan MASSERA, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland

    topicA-01 Bioceramics and bioactive glasses
    person_pinAmel HOUAOUI, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    P2- Bioceramics and bioactive glasses - Deposition of a polymer-based honeycomb-like membrane on 3D printed bioactive glass scaffold and decellularized bone matrix as scaffolds for bone tissue engineeringBioceramics and bioactive glassesAudrey DERAINE COQUEN, Laboratoire ERRMECe, CY Cergy Paris Université, Neuville sur Oise, France
    Emmanuel PAUTHE, Laboratoire ERRMECe, CY Cergy Paris Université
    Minna KELLOMAKI, BioMediTech institute, Medicine and Health Technology Faculty, Tampere University
    Michel BOISSIERE, Laboratoire ERRMECe, CY Cergy Paris Université
    Jonathan MASSERA, BioMediTech institute, Medicine and Health Technology Faculty, Tampere University

    topicA-01 Bioceramics and bioactive glasses
    person_pinMichel BOISSIERE, Laboratoire ERRMECe, CY Cergy Paris Université
    P3 - Bioceramics and bioactive glasses - Synthesis and Characterization of Strontium and/or Copper Doped Nanoparticles in the composition of AkermaniteBioceramics and bioactive glassesGeorgia K POUROUTZIDOU, School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki and School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki Greece
    Ioannis TSAMESIDIS, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Chrysanthi PAPOULIA, School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Eleana KONTONASAKI, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece

    topicA-01 Bioceramics and bioactive glasses
    person_pinGeorgia K POUROUTZIDOU, School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki and School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki Greece
    P4 - Bioceramics and bioactive glasses - Synthesis and Characterization of Akermanite Scaffolds Towards Bone Tissue RegenerationBioceramics and bioactive glassesGeorgia K POUROUTZIDOU, School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki and School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, Thessaloniki, Greece
    Maria LAZARIDOU, School of Chemistry, Faculty of Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Lambrini PAPADOPOULOU, School of Geology, Faculty of Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Konstantinos CHRISSAFIS, School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece and School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    George VOURLIAS, School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece and School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Dimitrios BIKIARIS, School of Chemistry, Faculty of Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Eleana KONTONASAKI, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece

    topicA-01 Bioceramics and bioactive glasses
    person_pinGeorgia K POUROUTZIDOU, School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki and School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, Thessaloniki, Greece
    P5 - Bioceramics and bioactive glasses - Synthesis and Characterization of Mesoporous Silica Nanoparticles Doped with Cerium for Biomedical Applications Bioceramics and bioactive glassesChrysanthi PAPAMARINOU, School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Georgia K POUROUTZIDOU, School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece and School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Eleana KONTONASAKI, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, Thessaloniki, Greece

    topicA-01 Bioceramics and bioactive glasses
    person_pinEleana KONTONASAKI, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, Thessaloniki, Greece
    P6 - Bioceramics and bioactive glasses - The Effect of pH Value on the Properties of MCM-41 Calcium and Cerium Doped Silica-Based Mesoporous Nanoparticles Bioceramics and bioactive glassesGeorgia K POUROUTZIDOU, School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki and School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, Thessaloniki, Greece
    Evangelia DELI, School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Chrysanthi PAPOULIA, School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Antigoni MARGELLOU, School of Chemistry, Faculty of Sciences, Aristotle University of Thessaloniki, Thessaloniki, Greece
    Dimitrios GKILIOPOULOS, School of Chemistry, Faculty of Sciences, Aristotle University of Thessaloniki, Thessaloniki, Greece
    George VOURLIAS, School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Konstantinos CHRISSAFIS, School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Konstantinos S. TRIANTAFYLLIDIS, School of Chemistry, Faculty of Sciences, Aristotle University of Thessaloniki, Thessaloniki, Greece
    Dimitrios BIKIARIS, School of Chemistry, Faculty of Sciences, Aristotle University of Thessaloniki, Thessaloniki, Greece
    Eleana KONTONASAKI, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece

    topicA-01 Bioceramics and bioactive glasses
    person_pinGeorgia K POUROUTZIDOU, School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki and School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, Thessaloniki, Greece
    P7 - Bioceramics and bioactive glasses - Bone Repair monitoring using K-edge Spectral ImagingBioceramics and bioactive glassesMaxence LIMELETTE, UMR CNRS 6230 CEISAM, Nantes, France
    Bruno BUJOLI, UMR CNRS 6230 CEISAM
    Frederic LEROUGE, Laboratoire de chimie ENS Lyon
    Szilvia KARPATI, Laboratoire de chimie ENS Lyon
    Stéphane PAROLA, Laboratoire de chimie ENS Lyon
    Olivier GAUTHIER, Oniris Nantes
    Philippe DOUEK, Hospices Civils de Lyon

    topicA-01 Bioceramics and bioactive glasses
    person_pinMaxence LIMELETTE, UMR CNRS 6230 CEISAM, Nantes, France
    P8 - Bioceramics and bioactive glasses - Injectable Bone Cement Containing CMC Microparticles for Silver Delivery Able to Reduce Implant-Associated Infection Risk Bioceramics and bioactive glassesSylvaine JACQUART, CIRIMAT - Toulouse INP
    Sophie GIROD-FULLANA, CIRIMAT - Université Paul Sabatier
    Fabien BROUILLET, CIRIMAT - Université Paul Sabatier
    Christel PIGASSE, LGC - Université Paul Sabatier
    Robin SIADOUS, Université de Bordeaux - BioTis
    Mohamed FATNASSI, CIRIMAT - Toulouse INP
    Julien GRIMOUD, LGC - Université Paul Sabatier
    Christian REY, CIRIMAT - Toulouse INP
    Christine ROQUES, LGC - Université Paul Sabatier
    Christèle COMBES, CIRIMAT, Université de Toulouse, CNRS, Toulouse INP - ENSIACET, Toulouse, France

    topicA-01 Bioceramics and bioactive glasses
    person_pinChristèle COMBES, CIRIMAT, Université de Toulouse, CNRS, Toulouse INP - ENSIACET, Toulouse, France
    P9 - Bioceramics and bioactive glasses - Bioactive Glasses From The Sio2-Cao-Na2O System With Angiogenic Properties For Bone Regeneration ApplicationBioceramics and bioactive glassesMartyna NIKODY, Department of Instructive Biomaterials Engineering & Department of Complex Tissue Regeneration, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, the Netherlands
    Matthias SCHUMMACHER, Department of Instructive Biomaterials Engineering, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, the Netherlands
    Lilian KESSELS, Department of Paediatrics, Maastricht University, Maastricht, the Netherlands
    Tim WOLFS, Department of Paediatrics, Maastricht University, Maastricht, the Netherlands
    Lizette MOREJON, Department of Ceramics and Composite Materials, BIOMAT Center for Biomaterials, University of Havana, Havana, Cuba
    Jose A. DELGADO, Department of Ceramics and Composite Materials, BIOMAT Center for Biomaterials, University of Havana, Havana, Cuba
    Lorenzo MORONI, Department of Complex Tissue Regeneration, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, the Netherlands
    Pamela HABIBOVIC, Department of Instructive Biomaterials Engineering, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, the Netherlands
    Elizabeth ROSADO BALMAYOR, Department of Instructive Biomaterials Engineering, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, the Netherlands

    topicA-01 Bioceramics and bioactive glasses
    person_pinMartyna NIKODY, Department of Instructive Biomaterials Engineering & Department of Complex Tissue Regeneration, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, the Netherlands
    P10 - Bioceramics and bioactive glasses - Investigating ionic therapy to restore bone regeneration following bisphosphonate related osteonecrosis of the jaw (BRONJ)Bioceramics and bioactive glassesWeijia HUANG, Division of Surgery, University College London, London, UK
    Azadeh REZAEI, University College London
    Yutong LI, University College London
    Sahar ALORAIBI, University college London
    Kaveh SHAKIB, University college London
    Gavin JELL, University college London

    topicA-01 Bioceramics and bioactive glasses
    person_pinWeijia HUANG, Division of Surgery, University College London, London, UK
    P11 - Bioceramics and bioactive glasses - Nanometric-sized Zirconias for dental applications: improving further the compromise between translucency, mechanical properties and aging resistanceBioceramics and bioactive glassesErica ROITERO, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    Helen REVERON, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, 69621 Villeurbanne , France
    Laurent GREMILLARD, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, 69621 Villeurbanne , France
    Vincent GARNIER, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, 69621 Villeurbanne , France
    Christian RITZBERGER, Ivoclar Vivadent AG, Benderstrasse 2, Li-9494 Schaan, Principality of Liechtenstein
    Jérôme CHEVALIER, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, 69621 Villeurbanne , France

    topicA-01 Bioceramics and bioactive glasses
    person_pinErica ROITERO, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    P12 - Bioceramics and bioactive glasses - Understanding soluble silicate species (Si) interactions with bone cellsBioceramics and bioactive glassesJoel TURNER, Division of Surgery and interventional sciences, UCL, London, UK
    Azadeh REZAEI, University College London
    Julian JONES, Imperial College London
    Gavin JELL, University College London

    topicA-01 Bioceramics and bioactive glasses
    person_pinJoel TURNER, Division of Surgery and interventional sciences, UCL, London, UK
    P14 - Bioceramics and bioactive glasses - Formation of b-TCP in a-TCP by intrinsic stressBioceramics and bioactive glassesAntonio J. SALINAS, Dept. Química en Ciencias Farmacéuticas, Universidad Complutense, Madrid, Spain
    Christoph STÄHLI, RMS Foundation, Bettlach, Switzerland
    Nicola DÖBELIN, RMS Foundation, Bettlach, Switzerland
    Marc BOHNER, RMS Foundation, Bettlach, Switzerland

    topicA-01 Bioceramics and bioactive glasses
    person_pinAntonio J. SALINAS, Dept. Química en Ciencias Farmacéuticas, Universidad Complutense, Madrid, Spain
    P15 - Bioceramics and bioactive glasses - Laser spinning of bioactive glass nanofibers for wound healing applicationsBioceramics and bioactive glassesAntonio RIVEIRO (1,3), (1) LaserOn research group, CINTECX, Univ. of Vigo ; Materials Eng., Applied Mechs. and Construction Dept., E.E.I., Univ. of Vigo, Vigo, Spain
    Mónica FERNÁNDEZ-ARIAS (1), (1) LaserOn research group, CINTECX, Univ. of Vigo, Lagoas-Marcosende 36310 Vigo, Spain
    Jesús DEL VAL (1), (1) LaserOn research group, CINTECX, Univ. of Vigo, Lagoas-Marcosende 36310 Vigo, Spain
    Rafael COMESAÑA (1,3), (1) LaserOn research group, CINTECX, Univ. of Vigo, Lagoas-Marcosende 36310 Vigo, Spain (3) Materials Eng., Applied Mechs. and Construction Dept., E.E.I., Univ. of Vigo, Lagoas-Marcosende 36310 Vigo, Spain
    Félix QUINTERO (1), (1) LaserOn research group, CINTECX, Univ. of Vigo, Lagoas-Marcosende 36310 Vigo, Spain
    Fernando LUSQUIÑOS (1), (1) LaserOn research group, CINTECX, Univ. of Vigo, Lagoas-Marcosende 36310 Vigo, Spain
    Julian R. JONES (4), (4) Department of Materials, Imperial College London, South Kensington Campus, London, SW7 2AZ, UK
    Juan POU (1), (1) LaserOn research group, CINTECX, Univ. of Vigo, Lagoas-Marcosende 36310 Vigo, Spain
    Felipe ARIAS GONZALEZ, (1) LaserOn research group, CINTECX, Univ. of Vigo, Lagoas-Marcosende 36310 Vigo, Spain

    topicA-01 Bioceramics and bioactive glasses
    person_pinFelipe ARIAS GONZALEZ, (1) LaserOn research group, CINTECX, Univ. of Vigo, Lagoas-Marcosende 36310 Vigo, Spain
    P16 - Bioceramics and bioactive glasses - Identification of signatures characterizing the physiological state of bone cells at the surface of hydroxyapatite bioceramicsBioceramics and bioactive glassesAlice ABÉLANET, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France
    Éric CHAMPION, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France
    Amandine MAGNAUDEIX, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France

    topicA-01 Bioceramics and bioactive glasses
    person_pinAmandine MAGNAUDEIX, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France
    P17 - Bioceramics and bioactive glasses - Bioglass-based magnetic electrospun membranes for bone cancer therapy and regenerationBioceramics and bioactive glassesRicardo MATOS, Departamento de Ciência dos Materiais - CENIMAT/i3N, FCT-NOVA, Caparica, Portugal
    Jorge SILVA, Departamento de Física - CENIMAT/i3N, FCT-NOVA, Caparica, Portugal
    Paula SOARES, Departamento de Ciência dos Materiais - CENIMAT/i3N, FCT-NOVA, Caparica, Portugal
    João BORGES, Departamento de Ciência dos Materiais - CENIMAT/i3N, FCT-NOVA, Caparica, Portugal

    topicA-01 Bioceramics and bioactive glasses
    person_pinJoão BORGES, Departamento de Ciência dos Materiais - CENIMAT/i3N, FCT-NOVA, Caparica, Portugal
    P18 - Bioceramics and bioactive glasses - Evaluation of the Bioactivity and Antioxidant Properties of Gentamicin and Polyphenols loaded Ce-MBGsBioceramics and bioactive glassesFrancesca FRAULINI, Department of Chemical and Geological Sciences, University of Modena and Reggio Emilia, Modena, Italy
    Gigliola LUSVARDI, University of Modena and Reggio Emilia
    Alfonso ZAMBON, University of Modena and Reggio Emilia

    topicA-01 Bioceramics and bioactive glasses
    person_pinFrancesca FRAULINI, Department of Chemical and Geological Sciences, University of Modena and Reggio Emilia, Modena, Italy
    P19 - Bioceramics and bioactive glasses - Composite (bio)inks with mesoporous bioactive glasses – advantages and challengesBioceramics and bioactive glassesVera GUDURIC, Centre for Translational Bone, Joint and Soft Tissue Research, Faculty of Medicine Carl Gustav Carus, TU Dresden, Germany
    Anne BERNHARDT, Centre for Translational Bone, Joint and Soft Tissue Research, Faculty of Medicine Carl Gustav Carus, TU Dresden, Germany
    Anja LODE, Centre for Translational Bone, Joint and Soft Tissue Research, Faculty of Medicine Carl Gustav Carus, TU Dresden, Germany
    Michael GELINSKY, Centre for Translational Bone, Joint and Soft Tissue Research, Faculty of Medicine Carl Gustav Carus, TU Dresden, Germany

    topicA-01 Bioceramics and bioactive glasses
    person_pinVera GUDURIC, Centre for Translational Bone, Joint and Soft Tissue Research, Faculty of Medicine Carl Gustav Carus, TU Dresden, Germany
    P20 - Bioceramics and bioactive glasses - Injectable Bone Substitutes with Enhanced Therapeutic Properties Bioceramics and bioactive glassesMaria Grazia RAUCCI, Institute of Polymers, Composites and Biomaterials – National Research Council (IPCB-CNR), Naples, Italy
    Xiao YANG, National Engineering Research Center for Biomaterials - Sichuan University
    Ines FASOLINO, National Research Council - Institute of Polymers, Composites and Biomaterials (CNR-IPCB)
    Alessandra SORIENTE, National Research Council - Institute of Polymers, Composites and Biomaterials (CNR-IPCB)
    Matteo SANTIN, School of Pharmacy & Biomolecular Sciences, University of Brighton
    Henri S. SCHREKKER, Institute of Chemistry, Universidade Federal do Rio Grande do Sul-UFRGS
    Xingdong ZHANG, National Engineering Research Center for Biomaterials - Sichuan University
    Luigi AMBROSIO, National Research Council - Institute of Polymers, Composites and Biomaterials (CNR-IPCB)

    topicA-01 Bioceramics and bioactive glasses
    person_pinMaria Grazia RAUCCI, Institute of Polymers, Composites and Biomaterials – National Research Council (IPCB-CNR), Naples, Italy
    P21 - Bioceramics and bioactive glasses - Tailoring hydroxyapatite bio-ceramic feedstock properties for masked stereolithography 3D printingBioceramics and bioactive glassesPedro Jesús NAVARRETE SEGADO, CIRIMAT & Laboratoire de Génie Chimique, Université de Toulouse, CNRS, Toulouse, France
    David GROSSIN, CIRIMAT, Université de Toulouse, CNRS, 4 Allée Émile Monso, 31030, Toulouse Cedex 4, France
    Mallorie TOURBIN, Laboratoire de Génie Chimique, Université de Toulouse, CNRS, 4 Allée Émile Monso, 31432, Toulouse Cedex 4, France
    Christine FRANCES, Laboratoire de Génie Chimique, Université de Toulouse, CNRS, 4 Allée Émile Monso, 31432, Toulouse Cedex 4, France

    topicA-01 Bioceramics and bioactive glasses
    person_pinPedro Jesús NAVARRETE SEGADO, CIRIMAT & Laboratoire de Génie Chimique, Université de Toulouse, CNRS, Toulouse, France
    P22 - Bioceramics and bioactive glasses - Novel borosilicate bioactive glass scaffolds for bone implantsBioceramics and bioactive glassesAgata SZCZODRA, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    Amel HOUAOUI, Faculty of Medicine and Health Technology, Tampere University
    Susanna MIETTINEN, Faculty of Medicine and Health Technology, Tampere University
    Jonathan MASSERA, Faculty of Medicine and Health Technology, Tampere University

    topicA-01 Bioceramics and bioactive glasses
    person_pinAgata SZCZODRA, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    P25 - Bioceramics and bioactive glasses - New amorphous calcium ortho-/pyrophosphate biomaterial promotes bone repair of critical-sized calvarial defects in ratBioceramics and bioactive glassesRebecca LANDON, B3OA, CNRS UMR 7052, INSERM U1271, ENVA, Université de Paris, 75010 Paris, France
    Maximilien DESBORD, CIRIMAT, UMR 5085 INPT-CNRS-UPS, Université de Toulouse, ENSIACET, 31030 Toulouse, France
    Robin SIADOUS, BIOTIS, INSERM U1026, Université de Bordeaux, 33000 Bordeaux, France
    Ahmad Moustapha DIALLO, B3OA, CNRS UMR 7052, INSERM U1271, ENVA, Université de Paris, 75010 Paris, France
    Nathanael LAROCHETTE, B3OA, CNRS UMR 7052, INSERM U1271, ENVA, Université de Paris, 75010 Paris, France
    Hanane EL-HAFCI, B3OA, CNRS UMR 7052, INSERM U1271, ENVA, Université de Paris, 75010 Paris, France
    Jérémy SOULIÉ, CIRIMAT, UMR 5085 INPT-CNRS-UPS, Université de Toulouse, ENSIACET, 31030 Toulouse, France
    Joelle AMÉDÉE, BIOTIS, INSERM U1026, Université de Bordeaux, 33000 Bordeaux, France
    Christèle COMBES, CIRIMAT, UMR 5085 INPT-CNRS-UPS, Université de Toulouse, ENSIACET, 31030 Toulouse, France
    Fani ANAGNOSTOU, B3OA, CNRS UMR 7052, INSERM U1271, ENVA, Université de Paris, 75010 Paris, France & Department of Periodontology, Service of Odontology-Pitie? Salpe?trie?re Hospital, AP-HP et U.F.R. of Odontology, 75013 Paris, France

    topicA-01 Bioceramics and bioactive glasses
    person_pinRebecca LANDON, B3OA, CNRS UMR 7052, INSERM U1271, ENVA, Université de Paris, 75010 Paris, France
    P26 - Bioceramics and bioactive glasses - Injectable Mesoporous Bioactive Nanoparticles for Bone Regeneration in Osteoporotic ModelBioceramics and bioactive glassesDaniel ARCOS, Dep. of Chemistry in Pharmaceutical Sciences. IdIS Hosp 12 Octubre. Univ. Complutense, Madrid, Spain-CIBER BBN
    Natividad GÓMEZ-CEREZO, Dep. of Chemistry in Pharmaceutical Sciences. IdIS Hosp 12 Octubre. Univ. Complutense, Madrid, Spain- CIBER BBN
    Laura CASARRUBIOS, Dep. of Biochemistry and Molecular Biology. IdISSC. Univ. Complutense, Madrid, Spain
    María José FEITO, Dep. of Biochemistry and Molecular Biology. IdISSC. Univ. Complutense, Madrid, Spain
    Melchor SAIZ-PARDO, Pathology Department, Hospital Clínico San Carlos, Madrid, Spain
    Luis ORTEGA, Pathology Department, Hospital Clínico San Carlos, Madrid, Spain
    David DE PABLO, Pathology Department, Hospital Clínico San Carlos, Madrid, Spain
    Idoia DIAZ-GÜEMES, Centro de Cirugía de Mínima Invasión Jesús Usón, NANBIOSIS. Cáceres, Spain
    Blanca FERNÁNDEZ-TOMÉ, Centro de Cirugía de Mínima Invasión Jesús Usón, NANBIOSIS. Cáceres, Spain
    Silvia ENCISO, Centro de Cirugía de Mínima Invasión Jesús Usón, NANBIOSIS. Cáceres, Spain
    Francisco Miguel SÁNCHEZ-MARGALLO, Centro de Cirugía de Mínima Invasión Jesús Usón, NANBIOSIS. Cáceres, Spain
    María VALLET-REGÍ, Dep. of Chemistry in Pharmaceutical Sciences. IdIS Hosp 12 Octubre. Univ. Complutense, Madrid, Spain-CIBER BBN
    María Teresa PORTOLÉS, Dep. of Biochemistry and Molecular Biology. IdISSC. Univ. Complutense, Madrid, Spain - CIBER BBN

    topicA-01 Bioceramics and bioactive glasses
    person_pinDaniel ARCOS, Dep. of Chemistry in Pharmaceutical Sciences. IdIS Hosp 12 Octubre. Univ. Complutense, Madrid, Spain-CIBER BBN
    P27 - Bioceramics and bioactive glasses - Influence of Bioceramic Scaffold Macro-Architecture on Loaded Mesenchymal Stromal Cell Viability and Local Inflammation in a Rat Subcutaneous ModelBioceramics and bioactive glassesAlexandra VILLARD, Université de Paris, CNRS UMR 7052, INSERM U1271, B3OA, Paris, France
    Baptiste CHARBONNIER, Nantes Université, INSERM UMRS 1229, RMeS, Nantes, France
    Manon MAROQUENNE, Université de Paris, CNRS UMR 7052, INSERM U1271, B3OA, Paris, France
    Guoyan XIAN, Université de Paris, CNRS UMR 7052, INSERM U1271, B3OA, Paris, France
    David MARCHAT, Mines Saint-Etienne, Univ Lyon, Univ Jean Monnet, Etablissement Français du Sang, INSERM U1059, Sainbiose, Saint-Etienne, France
    Hervé PETITE, Université de Paris, CNRS UMR 7052, INSERM U1271, B3OA, Paris, France
    Morad BENSIDHOUM, Université de Paris, CNRS UMR 7052, INSERM U1271, B3OA, Paris, France
    Delphine LOGEART-AVRAMOGLOU, Université de Paris, CNRS UMR 7052, INSERM U1271, B3OA, Paris, France
    Esther POTIER, Université de Paris, CNRS UMR 7052, INSERM U1271, B3OA, Paris, France

    topicA-01 Bioceramics and bioactive glasses
    person_pinBaptiste CHARBONNIER, Nantes Université, INSERM UMRS 1229, RMeS, Nantes, France
    P28 - Bioceramics and bioactive glasses - Synthesis of Octacalcium Phosphate by Co-Precipitation MethodBioceramics and bioactive glassesRajan CHOUDHARY, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia
    Abhishek INDURKAR, Riga Technical University
    Kristaps RUBENIS, Riga Technical University
    Janis LOCS, Riga Technical University

    topicA-01 Bioceramics and bioactive glasses
    person_pinRajan CHOUDHARY, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia
    P30 - Bioceramics and bioactive glasses - 3D printing of silk-bioceramic nanocomposites for the regeneration of innervated and vascularized bone tissueBioceramics and bioactive glassesVincent FITZPATRICK, BME department, Tufts University, Medford, Massachusetts, U.S.A
    Zaira MOLDES MARTIN, Tufts University
    Anna DECK, Tufts University
    Ruben TORRES SANCHEZ, Tufts University
    Anne VALAT, Tufts University
    Riley PATTEN, Tufts University
    David KAPLAN, Tufts University

    topicA-01 Bioceramics and bioactive glasses
    person_pinVincent FITZPATRICK, BME department, Tufts University, Medford, Massachusetts, U.S.A
    P31 - Bioceramics and bioactive glasses - Synthesis of nanosized silicoaluminophosphate (SAPO) zeolites with osteoinductive properties.Bioceramics and bioactive glassesCristian COVARRUBIAS, 1Laboratory of Nanobiomaterials, Research Institute for Dental Sciences, Faculty of Dentistry, University of Chile, Santiago, Chile.
    Torres CAMILA, Faculty of Dentistry, University of Chile.
    Maureira MIGUEL, Faculty of Dentistry, University of Chile.

    topicA-01 Bioceramics and bioactive glasses
    person_pinCristian COVARRUBIAS, 1Laboratory of Nanobiomaterials, Research Institute for Dental Sciences, Faculty of Dentistry, University of Chile, Santiago, Chile.
    P32 - Bioceramics and bioactive glasses - Fibronectin Adsorption On Surface-Modified Bioactive Glass S53P4 And Its Implication On Human Adipose Stem Cells BehaviorBioceramics and bioactive glassesVirginia Alessandra GOBBO, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    Amel HOUAOUI, Tampere University
    Agata SZCZODRA, Tampere University
    Paula TURKKI, Tampere University
    Vesa HYTÖNEN, Tampere University
    Susanna MIETTINEN, Tampere University
    Jonathan MASSERA, Tampere University

    topicA-01 Bioceramics and bioactive glasses
    person_pinVirginia Alessandra GOBBO, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    P33 - Bioceramics and bioactive glasses - Surface modified mesoporous bioactive glass: effect of silanization on bioactivity and protein interactionBioceramics and bioactive glassesAnita LUCAS, Institut des Sciences Chimiques de Rennes, UMR CNRS 6226, Université de Rennes1, Rennes, France.
    Khalil ANEB, a) Institut des Sciences Chimiques de Rennes, UMR CNRS 6226, Université de Rennes1, 263 avenue du Général Leclerc, 35042 Rennes, France. b) Laboratoire de Génie de l’Environnement, Département de Génie des Procédés, Faculté de Technologie, Université de Bejaia, 06000 Bejaia, Algérie.
    Soizic CHEVANCE, Institut des Sciences Chimiques de Rennes, UMR CNRS 6226, Université de Rennes1, 263 avenue du Général Leclerc, 35042 Rennes, France
    Odile MERDRIGNAC, Institut des Sciences Chimiques de Rennes, UMR CNRS 6226, Université de Rennes1, 263 avenue du Général Leclerc, 35042 Rennes, France
    Bertrand LEFEUVRE, Institut des Sciences Chimiques de Rennes, UMR CNRS 6226, Université de Rennes1, 263 avenue du Général Leclerc, 35042 Rennes, France
    Nouha LETAÏEF-OUNALLI, Laboratoire de Physico-Chimie des Matériaux, avenue de l’Environnement, Université de Monastir, 5000 Monastir, Tunisie
    Theodore BERTHELOT, Institut des Sciences Chimiques de Rennes, UMR CNRS 6226, Université de Rennes1, 263 avenue du Général Leclerc, 35042 Rennes, France

    topicA-01 Bioceramics and bioactive glasses
    person_pinAnita LUCAS, Institut des Sciences Chimiques de Rennes, UMR CNRS 6226, Université de Rennes1, Rennes, France.
    P34 - Bioceramics and bioactive glasses - 'Ready-to-use' magnesium phosphate bone cement with advanced degradation rateBioceramics and bioactive glassesFriederike KAISER, University Hospital of Wuerzburg, Department for Functional Materials in Medicine and Dentistry, Würzburg, Germany
    Anna-Lena PREISSLER, University Hospital of Wuerzburg, Department for Functional Materials in Medicine and Dentistry, Würzburg, Germany
    Lena SCHROETER, University Hospital of Ulm, Institute of Orthopaedic Research and Biomechanics, Ulm, Germany
    Anita IGNATIUS, University Hospital of Ulm, Institute of Orthopaedic Research and Biomechanics, Ulm, Germany
    Uwe GBURECK, University Hospital of Wuerzburg, Department for Functional Materials in Medicine and Dentistry, Würzburg, Germany

    topicA-01 Bioceramics and bioactive glasses
    person_pinFriederike KAISER, University Hospital of Wuerzburg, Department for Functional Materials in Medicine and Dentistry, Würzburg, Germany
    P1 - Bio-derived materials - Decellularized Fibrilar Matrix for Engineering Organotypic Tumor-stroma 3D BiomodelsBio-derived biomaterials Vitor GASPAR, CICECO‐Aveiro Institute of Materials, Aveiro University, Aveiro, Portugal
    Luis FERREIRA, CICECO- Aveiro Institute of Materials University of Aveiro
    Luis MENDES, CICECO- Aveiro Institute of Materials University of Aveiro
    Iola DUARTE, CICECO - Aveiro Institute of Materials University of Aveiro
    João MANO, CICECO - Aveiro Institute of Materials University of Aveiro

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinVitor GASPAR, CICECO‐Aveiro Institute of Materials, Aveiro University, Aveiro, Portugal
    P2 - Bio-derived materials - Development of a new preservation method of human amnio-chorionic membrane for bone regenerationBio-derived biomaterials Paul GALVEZ, University of Bordeaux, INSERM, Laboratory BioTis, UMR 1026, Bordeaux, France
    Naïma AHMED OMAR, University of Bordeaux, INSERM, Laboratory BioTis, UMR 1026, F-33076 Bordeaux, France
    Robin SIADOUS, University of Bordeaux, INSERM, Laboratory BioTis, UMR 1026, F-33076 Bordeaux, France
    Xavier LAFARGE, French Blood Establishment (EFS), Aquitaine-Limousin Branch, Bordeaux, France
    Loic SENTILHES, University hospital, Gynecology-Obstetrics Service, F-33076, Bordeaux, France
    Sylvain CATROS, University of Bordeaux, INSERM, Laboratory BioTis, UMR 1026, F-33076 Bordeaux, France
    Nicolas L'HEUREUX, University of Bordeaux, INSERM, Laboratory BioTis, UMR 1026, F-33076 Bordeaux, France
    Jean-Christophe FRICAIN, University of Bordeaux, INSERM, Laboratory BioTis, UMR 1026, F-33076 Bordeaux, France
    Mathilde FÉNELON, University of Bordeaux, INSERM, Laboratory BioTis, UMR 1026, F-33076 Bordeaux, France

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinPaul GALVEZ, University of Bordeaux, INSERM, Laboratory BioTis, UMR 1026, Bordeaux, France
    P3 - Bio-derived materials - A newly developed ECM scaffold for cardiac tissue engineering is remodeled by resident human cardiac progenitor cellsBio-derived biomaterials Anna Maria SACCO, Department of Public Health, University of Naples Federico II, Naples, Italy
    Domenico COZZOLINO, Department of Public Health, University of Naples Federico II
    Veronica ROMANO, Department of Public Health, University of Naples Federico II
    Immacolata BELVISO, Department of Public Health, University of Naples Federico II
    Giulia RICCI, Department of Experimental Medicine, Università della Campania Luigi Vanvitelli
    Marcella CAMMAROTA, Department of Experimental Medicine, Università della Campania Luigi Vanvitelli
    Oriana CASCIELLO, Department of Public Health, University of Naples Federico II
    Fabrizio SCHONAUER, Department of Public Health, University of Naples Federico II
    Cristiano AMARELLI, Department of Cardiovascular Surgery and Transplant, Monaldi Hospital
    Franca DI MEGLIO, Department of Public Health, University of Naples Federico II
    Clotilde CASTALDO, Department of Public Health, University of Naples Federico II

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinAnna Maria SACCO, Department of Public Health, University of Naples Federico II, Naples, Italy
    P5 - Bio-derived materials - Decellularized pancreatic extra-cellular matrix to mimic tumor microenvironment Bio-derived biomaterials Sophia COFFY, Univ. Grenoble Alpes, CEA, Inserm, IRIG, Biomics, Grenoble, France
    Anastasia PAPOZ, Univ. Grenoble Alpes, CEA, Inserm, IRIG, Biomics, F-38000, Grenoble, France
    Patricia OBEID, Univ. Grenoble Alpes, CEA, Inserm, IRIG, Biomics, F-38000, Grenoble, France
    Clémence PFEIL, Univ. Grenoble Alpes, CEA, Inserm, IRIG, Biomics, F-38000, Grenoble, France
    Julia NOVION-DUCASSOU, Univ. Grenoble Alpes, INSERM, CEA, UMR BioSanté U1292, CNRS, CEA, FR2048 38000, Grenoble France
    Edouard GIRARD, Univ. Grenoble Alpes, CNRS, CHU Grenoble Alpes Department of Digestive and Emergency Surgery, Grenoble INP, TIMC-IMAG, Grenoble, France.
    Gael ROTH, Univ. Grenoble Alpes, CNRS, CHU Grenoble Alpes Department of Digestive and Emergency Surgery, Grenoble INP, TIMC-IMAG, Grenoble, France.
    Xavier GIDROL, Univ. Grenoble Alpes, CEA, Inserm, IRIG, Biomics, F-38000, Grenoble, France
    Amandine PITAVAL, Univ. Grenoble Alpes, CEA, Inserm, IRIG, Biomics, F-38000, Grenoble, France

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinSophia COFFY, Univ. Grenoble Alpes, CEA, Inserm, IRIG, Biomics, Grenoble, France
    P6 - Bio-derived materials - Biological and mechanical characterization of a decellularized porcine esophageal biological matrixBio-derived biomaterials Romane LESIEUR, BIOTIS U1026 INSERM, Université de Bordeaux; CIC1401 INSERM, CHU de Bordeaux, Bordeaux, France
    Cécile MONFOULET, CIC1401 INSERM
    Samantha ROQUES, CIC1401 INSERM
    Martine RENARD, CIC1401 INSERM
    Agnès DROCHON, Institut de mécanique et d’ingénierie, UMR CNRS 5295
    Denis COLLET, Service de Chirurgie Digestive, CHU de Bordeaux
    Laurence BORDENAVE, BIOTIS U1026 - CIC1401 INSERM - Service de Médecine Nucléaire, CHU de Bordeaux
    Marlène DURAND, BIOTIS U1026 - CIC1401 INSERM

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinRomane LESIEUR, BIOTIS U1026 INSERM, Université de Bordeaux; CIC1401 INSERM, CHU de Bordeaux, Bordeaux, France
    P7 - Bio-derived materials - Engineering a Cell-derived Extracellular Matrix for Intervertebral Disc Regeneration using CRISPR/dCas9Bio-derived biomaterials Catarina MILHEIRO, i3S - Instituto de Investigação e Inovação em Saúde, Univeristy of Porto; ICBAS - Insituto de Ciências Biomédicas Abel Salazar, University of Porto, Porto, Portugal
    Raquel GONÇALVES, i3S - Instituto de Investigação e Inovação em Saúde, Univeristy of Porto; INEB - Instituto de Engenharia Biomédica, University of Porto; ICBAS - Insituto de Ciências Biomédicas Abel Salazar, University of Porto.
    Mário BARBOSA, i3S - Instituto de Investigação e Inovação em Saúde, Univeristy of Porto; INEB - Instituto de Engenharia Biomédica, University of Porto; ICBAS - Insituto de Ciências Biomédicas Abel Salazar, University of Porto.
    Joana CALDEIRA, i3S - Instituto de Investigação e Inovação em Saúde, Univeristy of Porto; INEB - Instituto de Engenharia Biomédica, University of Porto.

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinCatarina MILHEIRO, i3S - Instituto de Investigação e Inovação em Saúde, Univeristy of Porto; ICBAS - Insituto de Ciências Biomédicas Abel Salazar, University of Porto, Porto, Portugal
    P8 - Bio-derived materials - Human protein based materials to engineer groundbreaking accurate 3D models for cell culture and tissue engineering Bio-derived biomaterials Catarina CUSTÓDIO, Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Sara SANTOS, Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, 3810-193, Aveiro, Portugal
    Cátia MONTEIRO, Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, 3810-193, Aveiro, Portugal
    Inês DEUS, Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, 3810-193, Aveiro, Portugal
    Elisa MARTINS, Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, 3810-193, Aveiro, Portugal
    Andrºe LIMA, Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, 3810-193, Aveiro, Portugal
    João MANO, Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, 3810-193, Aveiro, Portugal

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinCatarina CUSTÓDIO, Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    P9 - Bio-derived materials - Yarn of Human Amniotic Membrane Can Be Woven into a Vascular Graft with Clinically-Relevant Mechanical PropertiesBio-derived biomaterials Agathe GRÉMARE, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026; CHU Bordeaux, Odontology and Oral Health Department
    Lisa THIBES, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026
    Maude GLUAIS, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026
    Yoann TORRES, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026
    Diane POTART, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026
    Nicolas DA SILVA, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026
    Nathalie DUSSERRE, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026
    Mathilde FÉNÉLON, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026; CHU Bordeaux, Odontology and Oral Health Department
    Loïc SENTILHES, CHU Bordeaux, Obstetrics and Gynecology Department, F-33076 Bordeaux, France
    Sabrina LACOMME, Univ. Bordeaux, CNRS, INSERM, Bordeaux Imaging Center, BIC, UMS 3420, US 4
    Isabelle SVAHN, Univ. Bordeaux, CNRS, INSERM, Bordeaux Imaging Center, BIC, UMS 3420, US 4
    Etienne GONTIER, Univ. Bordeaux, CNRS, INSERM, Bordeaux Imaging Center, BIC, UMS 3420, US 4
    Jean-Christophe FRICAIN, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026; CHU Bordeaux, Odontology and Oral Health Department
    Nicolas L'HEUREUX, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026, Bordeaux, France

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinNicolas L'HEUREUX, Univ. Bordeaux, INSERM, Laboratory for the Bioengineering of Tissues - BioTis, UMR1026, Bordeaux, France
    P10 - Bio-derived materials - Development of protocol for obtaining autologous liquid PRF for local drug delivery systemsBio-derived biomaterials Ilze SALMA, Institute of Stomatology, Riga Stradins University, Department of Oral and Maxillofacial Surgery, Riga Stradins University, Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, LV
    Lana MICKO, Institute of Stomatology, Riga Stradins University, Department of Oral and Maxillofacial Surgery, Riga Stradins University, Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, LV
    Karina EGLE, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, LV
    Arita DUBNIKA, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, LV

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinIlze SALMA, Institute of Stomatology, Riga Stradins University, Department of Oral and Maxillofacial Surgery, Riga Stradins University, Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, LV
    P12 - Bio-derived materials - Development Of Customized Nanoparticle-Doped Bioinks For 3D Printed Dynamic Cancer ModelsBio-derived biomaterials Paula VAZQUEZ-ARISTIZABAL, Biodonostia Health Research Institute, Tissue Engineering Group, Paseo Dr. Beguiristain s/n, 20014; CIC biomaGUNE, Basque Research and Technology Alliance (BRTA), Donostia-San Sebastián, Spain
    Malou HENRIKSEN-LACEY, CIC biomaGUNE / CIBER-BBN
    Dorleta JIMENEZ DE ABERASTURI, CIC biomaGUNE / CIBER-BBN / Ikerbasque
    Judith LANGER, CIC biomaGUNE / CIBER-BBN
    Ander IZETA, Biodonostia HRI / Tecnun (University of Navarra)
    Luis M. LIZ-MARZÁN, CIC biomaGUNE / CIBER-BBN / Ikerbasque

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinPaula VAZQUEZ-ARISTIZABAL, Biodonostia Health Research Institute, Tissue Engineering Group, Paseo Dr. Beguiristain s/n, 20014; CIC biomaGUNE, Basque Research and Technology Alliance (BRTA), Donostia-San Sebastián, Spain
    P13 - Bio-derived materials - Development of a purification process for xenogeneic bone matrices using supercritical CO2 technologyBio-derived biomaterials Solène ROTA, BIOBank, Lieusaint, France & BioSan group, ERRMECe Laboratory, CY Cergy-Paris Université, Neuville-sur-Oise, France
    Ludovic SICARD, Université Paris Cité, Laboratory URP2496 Orofacial Pathologies, Imaging and Biotherapies, Paris, France
    Justine PERARNAUD, BioSan group, ERRMECe Laboratory, CY Cergy-Paris Université, Neuville-sur-Oise, France
    Michel BOISSIERE, BioSan group, ERRMECe Laboratory, CY Cergy-Paris Université, Neuville-sur-Oise, France
    Raphaël BARDONNET, BIOBank, Lieusaint, France
    Catherine CHAUSSAIN, Université Paris Cité, Laboratory URP2496 Orofacial Pathologies, Imaging and Biotherapies, Paris, France
    Caroline GORIN, Université Paris Cité, Laboratory URP2496 Orofacial Pathologies, Imaging and Biotherapies, Paris, France
    Emmanuel PAUTHE, BioSan group, ERRMECe Laboratory, CY Cergy-Paris Université, Neuville-sur-Oise, France

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinSolène ROTA, BIOBank, Lieusaint, France & BioSan group, ERRMECe Laboratory, CY Cergy-Paris Université, Neuville-sur-Oise, France
    P14 - Bio-derived materials - Antibacterial and immunomodulatory decellularized Wharton’s jelly scaffold for tissue engineeringBio-derived biomaterials Marie DUBUS, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Loïc SCOMAZZON, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Julie CHEVRIER, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Léa ABOU NASSIF, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Fabien LAMRET, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Marius COLIN, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Cédric MAUPRIVEZ, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Halima KERDJOUDJ, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinHalima KERDJOUDJ, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    P15 - Bio-derived materials - Promising Decellularized Material Derived from Umbilical Cord Displays Extended Antibacterial PropertiesBio-derived biomaterials Fabien LAMRET, Biomatériaux et Inflammation en Site Osseux (BIOS) EA 4691, Université de Reims Champagne Ardenne, Reims, France
    Marie DUBUS, Biomatériaux et Inflammation en Site Osseux (BIOS) EA 4691, Université de Reims Champagne Ardenne, 51100 Reims, France
    Julie CHEVRIER, Biomatériaux et Inflammation en Site Osseux (BIOS) EA 4691, Université de Reims Champagne Ardenne, 51100 Reims, France
    Cédric MAUPRIVEZ, Biomatériaux et Inflammation en Site Osseux (BIOS) EA 4691, Université de Reims Champagne Ardenne, 51100 Reims, France
    Halima KERDJOUDJ, Biomatériaux et Inflammation en Site Osseux (BIOS) EA 4691, Université de Reims Champagne Ardenne, 51100 Reims, France
    Marius COLIN, Biomatériaux et Inflammation en Site Osseux (BIOS) EA 4691, Université de Reims Champagne Ardenne, 51100 Reims, France

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinFabien LAMRET, Biomatériaux et Inflammation en Site Osseux (BIOS) EA 4691, Université de Reims Champagne Ardenne, Reims, France
    P17 - Bio-derived materials - Influence of HHP treatment on cell death of differentiated cartilage tissueBio-derived biomaterials Nico BRANDT, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald, Greifswald, Germany
    Christopher POHL, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    Charlotte KOPPE, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    Andreas HOENE, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    Daniel BEHRENDT, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    Friederike POOSCH, Department of Oto-Rhino-Laryngology, Head and Neck Surgery, Rostock University Medical
    Daniel STRÜDER, Department of Oto-Rhino-Laryngology, Head and Neck Surgery, Rostock University Medical
    Michael SCHLOSSER, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinNico BRANDT, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald, Greifswald, Germany
    P18 - Bio-derived materials - Co-encapsulation of Macrophages with Candida albicans in Porcine Decellularized Adipose Extracellular Matrix Hydrogels Bio-derived biomaterials Diez-Orejas ROSALÍA, Departamento de Microbiología y Parasitología, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), Madrid, Spain
    Cicuéndez MÓNICA, Departamento de Química en Ciencias Farmacéuticas, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain
    García-Lizarribar ANDREA, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    Casarrubios LAURA, Departamento de Bioquímica y Biología Molecular, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain
    Polo-Montalvo ALBERTO, Departamento de Bioquímica y Biología Molecular, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain
    Feito MARÍA JOSÉ, Departamento de Bioquímica y Biología Molecular, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain
    Fernández-San-Argimiro FRANCISCO JAVIER, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    García-Urkia NEREA, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    Murua OLATZ, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    Madarieta IRATXE, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    Olalde BEATRIZ, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    Portolés MARÍA TERESA, Departamento de Bioquímica y Biología Molecular, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain; CIBER de Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, 28040 Madrid, Spain

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinDiez-Orejas ROSALÍA, Departamento de Microbiología y Parasitología, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), Madrid, Spain
    P19 - Bio-derived materials - Use of tubular plants as vascular models: A feasibility study of decellularization and characterization Bio-derived biomaterials Ali SALEHI, Institute for Biomedical Engineering (BMT), University of Stuttgart, Stuttgart, Germany
    Gemma LUCAS SALIDO, Institute for Biomedical Engineering (BMT), University of Stuttgart
    Giorgio CATTANEO, Institute for Biomedical Engineering (BMT), University of Stuttgart

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinAli SALEHI, Institute for Biomedical Engineering (BMT), University of Stuttgart, Stuttgart, Germany
    P20 - Bio-derived materials - Porcine Decellularized Adipose Extracellular Matrix Hydrogels Modulate Proliferation and Pro-inflammatory Response of Encapsulated MacrophagesBio-derived biomaterials Cicuéndez MÓNICA, Departamento de Química en Ciencias Farmacéuticas, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), Madrid, Spain
    García-Lizarribar ANDREA, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    Casarrubios LAURA, Departamento de Bioquímica y Biología Molecular, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain
    Polo-Montalvo ALBERTO, Departamento de Bioquímica y Biología Molecular, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain
    Feito MARÍA JOSÉ, Departamento de Bioquímica y Biología Molecular, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain
    Fernández-San-Argimiro FRANCISCO JAVIER, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    García-Urkia NEREA, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    Murua OLATZ, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    Madarieta IRATXE, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    Diez-Orejas ROSALÍA, Departamento de Microbiología y Parasitología, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain
    Olalde BEATRIZ, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    Portolés MARÍA TERESA, Departamento de Bioquímica y Biología Molecular, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain; CIBER de Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, 28040 Madrid, Spain

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinCicuéndez MÓNICA, Departamento de Química en Ciencias Farmacéuticas, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), Madrid, Spain
    P21 - Bio-derived materials - Effects of Porcine Decellularized Adipose Extracellular Matrix Hydrogels on Encapsulated Liver, Lung and Kidney CellsBio-derived biomaterials Polo-Montalvo ALBERTO, Departamento de Bioquímica y Biología Molecular, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain
    Cicuéndez MÓNICA, Departamento de Química en Ciencias Farmacéuticas, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain
    García-Lizarribar ANDREA, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    Casarrubios LAURA, Departamento de Bioquímica y Biología Molecular, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain
    Feito MARÍA JOSÉ, Departamento de Bioquímica y Biología Molecular, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain
    Fernández San Argimiro FRANCISCO JAVIER, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    García-Urkia NEREA, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    Murua OLATZ, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    Madarieta IRATXE, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    Diez-Orejas ROSALÍA, Departamento de Microbiología y Parasitología, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain
    Olalde BEATRIZ, TECNALIA, Basque Research and Technology Alliance (BRTA), E20009 Donostia-San Sebastian, Spain
    Portolés MARÍA TERESA , Departamento de Bioquímica y Biología Molecular, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain; CIBER de Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, Madrid, Spain

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinPortolés MARÍA TERESA , Departamento de Bioquímica y Biología Molecular, Universidad Complutense de Madrid (UCM), Instituto de Investigación Sanitaria del Hospital Clínico San Carlos (IdISSC), 28040 Madrid, Spain; CIBER de Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, Madrid, Spain
    P22 - Bio-derived materials - Porcine decellularized adipose matrix-based bioinks to fabricate 3D-printed models of the central nervous systemBio-derived biomaterials Andrea GARCÍA LIZARRIBAR, TECNALIA, Basque Research and Technology Alliance (BRTA), Donostia-San Sebastian, Spain
    Lina PAPADIMITRIOU, IESL, Foundation for Research and Technology-Hellas (FORTH)
    Francisco Javier FERNANDEZ SAN ARGIMINO, TECNALIA, Basque Research and Technology Alliance (BRTA)
    Olatz MURUA, TECNALIA, Basque Research and Technology Alliance (BRTA)
    Iratxe MADARIETA, TECNALIA, Basque Research and Technology Alliance (BRTA)
    Anthi RANELLA, IESL, Foundation for Research and Technology-Hellas (FORTH)
    Beatriz OLALDE, TECNALIA, Basque Research and Technology Alliance (BRTA)

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinAndrea GARCÍA LIZARRIBAR, TECNALIA, Basque Research and Technology Alliance (BRTA), Donostia-San Sebastian, Spain
    P23 - Bio-derived materials - Optimization of Cartilage Decellularization to Obtain Functional Extracellular MatrixBio-derived biomaterials Unai MENDIBIL, Center for Cooperative Research in Biomaterial (CIC biomaGUNE), Donostia-San Sebastian, Spain; TECNALIA, Donostia-San Sebastian, Spain
    Nerea GARCIA-URQUIA, TECNALIA
    MIkel AZKARGORTA, CIC bioGUNE
    Felix ELORTZA, CIC bioGUNE
    Beatriz OLALDE, TECNALIA
    Ander ABARRATEGI, CIC biomaGUNE

    topicA-02 Bio-derived biomaterials (decellularized tissues, tissue banks)
    person_pinUnai MENDIBIL, Center for Cooperative Research in Biomaterial (CIC biomaGUNE), Donostia-San Sebastian, Spain; TECNALIA, Donostia-San Sebastian, Spain
    P1 - Biomimetic and bioinspired materials - 3D Bioinspired Hydrogels with Molecularly Imprinted Nanoparticles Sequester Endogenous Growth Factors and Synergistically Direct Stem Cell Fate CommitmentBiomimetic and bioinspired materialsSimão P. B. TEIXEIRA, 3B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Braga/Guimarães, Portugal
    Alberto PARDO, 3B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark – Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805 017 Barco GMR, Portugal. ICVS/3B's–PT Government Associate Laboratory, Braga/Guimarães, Portugal. Colloids and Polymers Physics Group, Particle Physics Department and Health Research Institute, University of Santiago de Compostela, 15782 Santiago de Compostela, Spain
    Syeda Mahwish BAKHT, 3B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark – Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805 017 Barco GMR, Portugal. ICVS/3B's–PT Government Associate Laboratory, Braga/Guimarães, Portugal.
    Manuel GOMEZ-FLORIT, 3B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark – Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805 017 Barco GMR, Portugal. ICVS/3B's–PT Government Associate Laboratory, Braga/Guimarães, Portugal.
    Rui L. REIS, 3B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark – Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805 017 Barco GMR, Portugal. ICVS/3B's–PT Government Associate Laboratory, Braga/Guimarães, Portugal.
    Manuela E. GOMES, 3B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark – Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805 017 Barco GMR, Portugal. ICVS/3B's–PT Government Associate Laboratory, Braga/Guimarães, Portugal.
    Rui M. A. DOMINGUES, 3B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark – Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805 017 Barco GMR, Portugal. ICVS/3B's–PT Government Associate Laboratory, Braga/Guimarães, Portugal.

    topicA-03 Biomimetic and bioinspired materials
    person_pinRui M. A. DOMINGUES, 3B's Research Group, I3Bs—Research Institute on Biomaterials, Biodegradables and Biomimetics of University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark – Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805 017 Barco GMR, Portugal. ICVS/3B's–PT Government Associate Laboratory, Braga/Guimarães, Portugal.
    P4 - Biomimetic and bioinspired materials - ECM mimicking hydrogel scaffolds for liver tissue engineering Biomimetic and bioinspired materialsNathan CARPENTIER, Polymer Chemistry and Biomaterials group, Ghent University, Ghent, Belgium
    Louis VAN DER MEEREN, Nano-biotechnology Laboratory, Ghent university
    Andre SKIRTACH, Nano-biotechnology Laboratory, Ghent university
    Lindsey DEVISSCHER, Gut-Liver Immunopharmacology Unit, Dpt Basic and Applied Medical Sciences, Ghent University
    Hans VAN VLIERBERGHE, Hepatology Research Unit, Dpt Internal Medicine and Paediatrics, Ghent University
    Peter DUBRUEL, Polymer Chemistry and Biomaterials group, Ghent University
    Sandra VAN VLIERBERGHE, Polymer Chemistry and Biomaterials group, Ghent University

    topicA-03 Biomimetic and bioinspired materials
    person_pinNathan CARPENTIER, Polymer Chemistry and Biomaterials group, Ghent University, Ghent, Belgium
    P5 - Biomimetic and bioinspired materials - Hybrid HMSCs-Microcomposite Building Blocks for Bottom-Up Engineering of Bone TissueBiomimetic and bioinspired materialsK. SONG, Department of Instructive Biomaterials Engineering, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, The Netherlands
    Zeinab TAHMASEBI BIRGANI, 0616193079
    Pamela HABIBOVIC, 83155
    Roman TRUCKENMÜLLER, 0614340516

    topicA-03 Biomimetic and bioinspired materials
    person_pinK. SONG, Department of Instructive Biomaterials Engineering, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, The Netherlands
    P8 - Biomimetic and bioinspired materials - Multi-Material Approach For The Replacement Of The Temporomandibular Joint Biomimetic and bioinspired materialsJoanna BABILOTTE, Complex Tissue Regeneration department, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, the Netherlands
    Monize CAIADO DECARLI, MERLN Institute for Technology-Inspired Regenerative Medicine
    Amit CHANDRAKAR, MERLN Institute for Technology-Inspired Regenerative Medicine
    Paul WIERINGA, MERLN Institute for Technology-Inspired Regenerative Medicine
    Lorenzo MORONI, MERLN Institute for Technology-Inspired Regenerative Medicine

    topicA-03 Biomimetic and bioinspired materials
    person_pinJoanna BABILOTTE, Complex Tissue Regeneration department, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, the Netherlands
    P9 - Biomimetic and bioinspired materials - Organo-mineral 3D-printed scaffolds for bone regenerationBiomimetic and bioinspired materialsBaptiste CHARBONNIER, RMeS Lab - INSERM U 1229 - Nantes University, Nantes, France
    Segolène REISS, RMeS Lab - INSERM U 1229 - Nantes University
    Pierre CORRE, RMeS Lab - INSERM U 1229 - Nantes University
    Pierre WEISS, RMeS Lab - INSERM U 1229 - Nantes University

    topicA-03 Biomimetic and bioinspired materials
    person_pinBaptiste CHARBONNIER, RMeS Lab - INSERM U 1229 - Nantes University, Nantes, France
    P10 - Biomimetic and bioinspired materials - Cabbage leaves as 3D platform for in vitro adipose tissue modelBiomimetic and bioinspired materialsMaddalena BRACCHI, Politecnico di Milano
    Andrea FIORATI, Politecnico di Milano
    Lina ALTOMARE, Dipartimento di Chimica, Materiali, Ing. Chimica ‘G Natta’ Politecnico di Milano, Milan, Italy

    topicA-03 Biomimetic and bioinspired materials
    person_pinLina ALTOMARE, Dipartimento di Chimica, Materiali, Ing. Chimica ‘G Natta’ Politecnico di Milano, Milan, Italy
    P12 - Biomimetic and bioinspired materials - Multifunctional biomimetic pancreatic cancer cell membrane-camouflaged vitamin E-based prodrug micelles Biomimetic and bioinspired materialsMiguel PEREIRA DA SILVA, Department of Pharmaceutical Technology, Faculty of Pharmacy, University of Coimbra, Coimbra, Portugal
    Alba FERREIRÓS, Nasasbiotech, S.L., Canton Grande 9, 15003 A Coruña, Spain
    Ana Cláudia PAIVA-SANTOS, 1 Department of Pharmaceutical Technology, Faculty of Pharmacy, University of Coimbra, 3000-548 Coimbra, Portugal; 2 REQUIMTE/LAQV, Group of Pharmaceutical Technology, Faculty of Pharmacy, University of Coimbra, 3000-548 Coimbra, Portugal
    Francisco VEIGA, 1 Department of Pharmaceutical Technology, Faculty of Pharmacy, University of Coimbra, 3000-548 Coimbra, Portugal; 2 REQUIMTE/LAQV, Group of Pharmaceutical Technology, Faculty of Pharmacy, University of Coimbra, 3000-548 Coimbra, Portuga
    Angel CONCHEIRO, Departamento de Farmacología, Farmacia y Tecnología Farmacéutica, I+D Farma, Facultad de Farmacia and Health Research Institute of Santiago de Compostela (IDIS), Universidade de Santiago de Compostela, 15782 Santiago de Compostela, Spain
    Carmen ALVAREZ-LORENZO, Departamento de Farmacología, Farmacia y Tecnología Farmacéutica, I+D Farma, Facultad de Farmacia and Health Research Institute of Santiago de Compostela (IDIS), Universidade de Santiago de Compostela, 15782 Santiago de Compostela, Spain

    topicA-03 Biomimetic and bioinspired materials
    person_pinMiguel PEREIRA DA SILVA, Department of Pharmaceutical Technology, Faculty of Pharmacy, University of Coimbra, Coimbra, Portugal
    P13 - Biomimetic and bioinspired materials - Bone Regeneration with Antibiotic Delivery – A New Approach to Osteomyelitis and Infected Joint ReplacementsBiomimetic and bioinspired materialsEoin BARRETT, Royal College of Surgeons in Ireland
    Helena KELLY, Royal College of Surgeons in Ireland
    Robert FLAVIN, St. Vincent's Private Hospital, Dublin, Ireland
    Gerard INSLEY, PBC Biomed
    Ciara MURPHY, Anatomy and Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland

    topicA-03 Biomimetic and bioinspired materials
    person_pinGerard INSLEY, PBC Biomed
    P14 - Biomimetic and bioinspired materials - The interplay of collagen/bioactive glass nanoparticle coatings and electrical stimulation regimes distinctly enhanced osteogenic differentiation of human mesenchymal stem cellsBiomimetic and bioinspired materialsPoh Soo LEE, Institute of General Electrical Engineering, University of Rostock, Rostock, Germany; Max Bergmann Centre of Biomaterials, Technische Universität Dresden, Dresden, Germany
    Christiane HEINEMANN, Technical University of Dresden; Max-Bergmann Center of Biomaterials, Institute of Materials Science, Faculty of Mechanical Science and Engineering
    Kai ZHENG, Nanjing Medical University; Jiangsu Province Engineering Research Center of Stomatological Translational Medicine
    Revathi APPALI, University of Rostock; Institute of General Electrical Engineering, Faculty of Computer Science and Electrical Engineering; Department of Ageing of Individuals and Society, Interdisciplinary Faculty
    Jan KRIEGHOFF, University Leipzig; Institute of Pharmacy, Pharmaceutical Technology, Faculty of Medicine
    Aldo BOCCACCINI, University of Erlangen-Nuremburg; Department of Material Science and Engineering, Institute of Biomaterials
    Ursula VAN RIENEN, University of Rostock; Institute of General Electrical Engineering, Faculty of Computer Science and Electrical Engineering; Department of Ageing of Individuals and Society, Interdisciplinary Faculty; Department of Life, Light and Matter, Interdisciplinary Faculty
    Vera HINTZE, Technical University of Dresden; Max-Bergmann Center of Biomaterials, Institute of Materials Science, Faculty of Mechanical Science and Engineering

    topicA-03 Biomimetic and bioinspired materials
    person_pinPoh Soo LEE, Institute of General Electrical Engineering, University of Rostock, Rostock, Germany; Max Bergmann Centre of Biomaterials, Technische Universität Dresden, Dresden, Germany
    P16 - Biomimetic and bioinspired materials - Collagen-MWCNTs composite foils from benign solvent– optimization of parameters and physicochemical characteristicBiomimetic and bioinspired materialsSebastian WILK, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Krakow, Poland
    Michal DZIADEK , AGH University of Science and Technology; Jagiellonian University, Department of Chemistry
    Magdalena ZIABKA, AGH University of Science and Technology
    Katarzyna CHOLEWA-KOWALSKA, AGH University of Science and Technology
    Aleksandra BENKO, AGH University of Science and Technology

    topicA-03 Biomimetic and bioinspired materials
    person_pinSebastian WILK, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Krakow, Poland
    P17 - Biomimetic and bioinspired materials - Novel design of gelatin microparticles for anticancer delivery and integration with fibre-based devicesBiomimetic and bioinspired materialsSamuel MOORCROFT, Leeds Institute of Textiles and Colour, University of Leeds ; School of Mechanical Engineering, University of Leeds, Leeds, United Kingdom
    Giuseppe TRONCI, Leeds Institute of Textiles and Colour, University of Leeds
    Russell HARRIS, School of Mechanical Engineering, University of Leeds
    Stephen RUSSELL, Leeds Institute of Textiles and Colour, University of Leeds

    topicA-03 Biomimetic and bioinspired materials
    person_pinSamuel MOORCROFT, Leeds Institute of Textiles and Colour, University of Leeds ; School of Mechanical Engineering, University of Leeds, Leeds, United Kingdom
    P18 - Biomimetic and bioinspired materials - 3D printed bone-like scaffolds: design and biological assessmentBiomimetic and bioinspired materialsMiriam MERCO, Institute of Translational Pharmacology, National Research Council, Rome, Italy
    Federico MOCHI, Hypatia Research Consortium, Rome, Italy
    Eleonora ZENOBI, Hypatia Research Consortium, Rome, Italy
    Elisa SCATENA, Hypatia Research Consortium, Rome, Italy
    Antonella LISI, Institute of Translational Pharmacology, National Research Council, Rome, Italy.
    Costantino DEL GAUDIO, Hypatia Research Consortium, Rome, Italy
    Mario LEDDA, Institute of Translational Pharmacology, National Research Council, Rome, Italy.

    topicA-03 Biomimetic and bioinspired materials
    person_pinMiriam MERCO, Institute of Translational Pharmacology, National Research Council, Rome, Italy
    P20 - Biomimetic and bioinspired materials - Biomimetic approach to decipher proliferation, adhesion and differentiation in neuroblastoma cell linesBiomimetic and bioinspired materialsJoão Carlos LOPES CARDOSO FILHO, CEA, CNRS, University Grenoble Alpes, BRM ERL 5000, Grenoble, France
    Perrine M’PEMBA-HENNEBERT, CEA, CNRS, University Grenoble Alpes, BRM ERL 5000
    Paul MACHILLOT, CEA, CNRS, University Grenoble Alpes, BRM ERL 5000
    Elisa MIGLIORINI, CEA, CNRS, University Grenoble Alpes, BRM ERL 5000
    Catherine PICART, CEA, CNRS, University Grenoble Alpes, BRM ERL 5000; CEA, direction of fundamental research, interdisciplinary research institute of Grenoble (IRIG), FRE CNRS

    topicA-03 Biomimetic and bioinspired materials
    person_pinJoão Carlos LOPES CARDOSO FILHO, CEA, CNRS, University Grenoble Alpes, BRM ERL 5000, Grenoble, France
    P21 - Biomimetic and bioinspired materials - 3D Printing Biomimetic Analogues of Calcium Deposits at Vascular Chronic Total Occlusions Using Computed Tomography Angiography Biomimetic and bioinspired materialsMuireann O'REILLY, (1) Discipline of Anatomy and Regenerative Medicine Institute, School of Medicine, College of Medicine, Nursing and Health Sciences, National University of Ireland Galway, Galway, Ireland (2) CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland Galway, Galway, Ireland
    Benjamin BRENNAN, (1) Discipline of Anatomy and Regenerative Medicine Institute, School of Medicine, College of Medicine, Nursing and Health Sciences, National University of Ireland Galway, Galway, Ireland (2) CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland Galway, Galway, Ireland
    Hugh G. MANNING, (3) SFI Centre for Advanced Materials and Bioengineering Research (AMBER), Trinity College Dublin and National University of Ireland Galway, Ireland (4) Additive Research Laboratory (AR-Lab), Trinity College Dublin, Dublin, Ireland
    Rachel BEATTY, (1) Discipline of Anatomy and Regenerative Medicine Institute, School of Medicine, College of Medicine, Nursing and Health Sciences, National University of Ireland Galway, Galway, Ireland (3) SFI Centre for Advanced Materials and Bioengineering Research (AMBER), Trinity College Dublin and National University of Ireland Galway, Ireland
    Peter DOCKERY, (1) Discipline of Anatomy and Regenerative Medicine Institute, School of Medicine, College of Medicine, Nursing and Health Sciences, National University of Ireland Galway, Galway, Ireland
    Garry P. DUFFY, (1) Discipline of Anatomy and Regenerative Medicine Institute, School of Medicine, College of Medicine, Nursing and Health Sciences, National University of Ireland Galway, Galway, Ireland (2) CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland Galway, Galway, Ireland (3) SFI Centre for Advanced Materials and Bioengineering Research (AMBER), Trinity College Dublin and National University of Ireland Galway, Ireland

    topicA-03 Biomimetic and bioinspired materials
    person_pinMuireann O'REILLY, (1) Discipline of Anatomy and Regenerative Medicine Institute, School of Medicine, College of Medicine, Nursing and Health Sciences, National University of Ireland Galway, Galway, Ireland (2) CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland Galway, Galway, Ireland
    P22 - Biomimetic and bioinspired materials - Improving the Biofunctionality of Bacterial Nanocellulose Hydrogel Scaffolds by Bioprocessing StrategiesBiomimetic and bioinspired materialsJörn HÜLSMANN, Department for Cardiac Surgery, Otto von Guericke University, Medical Faculty, Magdeburg, Germany
    Fabian REUTER, Otto von Guericke University Magdeburg, Department Soft Matter
    Martin BEUTNER, Otto von Guericke University Magdeburg, Institute of Manufacturing Technology and Quality Management
    Theresa FRAUNE, Otto von Guericke University Magdeburg, Medical Faculty, Department for Cardiac Surgery
    Viktoria BECK, Otto von Guericke University Magdeburg, Medical Faculty, Department for Cardiac Surgery
    Max WACKER, Otto von Guericke University Magdeburg, Medical Faculty, Department for Cardiac Surgery
    Matthias HACKERT-OSCHÄTZCHEN, Otto von Guericke University Magdeburg, Institute of Manufacturing Technology and Quality Management
    Claus-Dieter OHL, Otto von Guericke University Magdeburg, Department Soft Matter
    Katja BETTENBROCK, Max Planck Institute for Dynamics of Complex Technical Systems, Department Analysis and Redesign of Biological Networks
    Maximilian SCHERNER, Otto von Guericke University Magdeburg, Medical Faculty, Department for Cardiac Surgery
    Jens WIPPERMANN, Otto von Guericke University Magdeburg, Medical Faculty, Department for Cardiac Surgery

    topicA-03 Biomimetic and bioinspired materials
    person_pinJörn HÜLSMANN, Department for Cardiac Surgery, Otto von Guericke University, Medical Faculty, Magdeburg, Germany
    P24 - Biomimetic and bioinspired materials - Innovative UV-physical filter based on hybrid Ti-doped hydroxyapatite for eco-sustainable sunscreen formulationsBiomimetic and bioinspired materialsElisabetta CAMPODONI, ISTEC-CNR
    Margherita MONTANARI, ISTEC-CNR
    Chiara ARTUSI, Institute of Science and Technology for Ceramics-National Research Council (ISTEC-CNR), Faenza, Italy
    Linda BERGAMINI, ISTEC-CNR
    Giada BASSI, ISTEC-CNR
    Silvia PANSERI, ISTEC-CNR
    Anna TAMPIERI, ISTEC-CNR
    Alessandra SANSON, ISTEC-CNR
    Monica SANDRI, ISTEC-CNR

    topicA-03 Biomimetic and bioinspired materials
    person_pinChiara ARTUSI, Institute of Science and Technology for Ceramics-National Research Council (ISTEC-CNR), Faenza, Italy
    P28 - Biomimetic and bioinspired materials - Development of bio-inspired protein-based materials as novel anti-corrosive coatings and transparent adhesivesBiomimetic and bioinspired materialsCraig ALLAN, Institute of Life Science, Swansea University, Swansea, United Kingdom
    Gethin ALLEN, Swansea University
    Alex HAROLD, Swansea University
    Sholeem GRIFFIN, Swansea University
    David PENNEY, Swansea University
    Geertje VAN KEULEN, Swansea University

    topicA-03 Biomimetic and bioinspired materials
    person_pinCraig ALLAN, Institute of Life Science, Swansea University, Swansea, United Kingdom
    P29 - Biomimetic and bioinspired materials - Recombinant polyelectrolyte-based Complex Coacervates with intrinsically disordered and LCST behaviorBiomimetic and bioinspired materialsJulio FERNÁNDEZ-FERNÁNDEZ, GIR BIOFORGE, University of Valladolid, Valladolid, Spain
    Carmen HERRERO, GIR BIOFORGE, University of Valladolid
    Jaime CALDEVILLA, GIR BIOFORGE, University of Valladolid
    Mercedes SANTOS, GIR BIOFORGE, University of Valladolid
    Matilde ALONSO, GIR BIOFORGE, University of Valladolid
    Jose Carlos RODRÍGUEZ, GIR BIOFORGE, University of Valladolid

    topicA-03 Biomimetic and bioinspired materials
    person_pinJulio FERNÁNDEZ-FERNÁNDEZ, GIR BIOFORGE, University of Valladolid, Valladolid, Spain
    P30 - Biomimetic and bioinspired materials - New boron-containing cryogel scaffolds for tissue engineering applicationBiomimetic and bioinspired materialsSeda CEYLAN, Department of Bioengineering, Faculty of Engineering, Adana Alparslan Türke? Science and Technology University, Adana, Turkey
    Ryan DIMMOCK, School of Pharmacy and Bioengineering, Keele University, Stoke on Trent, UK
    Ying YANG, School of Pharmacy and Bioengineering, Keele University, Stoke on Trent, UK

    topicA-03 Biomimetic and bioinspired materials
    person_pinRyan DIMMOCK, School of Pharmacy and Bioengineering, Keele University, Stoke on Trent, UK
    P31 - Biomimetic and bioinspired materials - Osteoinductive porous Ti6Al4V-beta Tricalcium Phosphate Hybrid Scaffolds for Orthopedic ApplicationsBiomimetic and bioinspired materialsJiaPing LI, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, The Netherlands

    topicA-03 Biomimetic and bioinspired materials
    person_pinJiaPing LI, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, The Netherlands
    P33 - Biomimetic and bioinspired materials - Fabrication of Collagen-Hyaluronic Acid Cryogels by Directional Freezing Mimicking the Arcade-Like Structure of Articular CartilageBiomimetic and bioinspired materialsTaiyo YAMAMOTO, AO Foundation
    Rotsiniaina RANDRIANTSILEFISOA, AO Research Institute Davos, Davos Platz, Switzerland
    Christoph SPRECHER, AO Foundation
    Matteo D'ESTE, AO Foundation

    topicA-03 Biomimetic and bioinspired materials
    person_pinRotsiniaina RANDRIANTSILEFISOA, AO Research Institute Davos, Davos Platz, Switzerland
    P34 - Biomimetic and bioinspired materials - Hybrid bioinspired coating induces in vivo critical-sized defect bone regeneration Biomimetic and bioinspired materialsMarie DUBUS, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Loïc SCOMAZZON, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Léa ABOU NASSIF, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Adrien BALDIT, LEM3-UMR-7239, CNRS - Arts et Métiers ParisTech; ENIM, Université de Lorraine, Metz, France
    Abdelilah BELJEBBAR, UMR CNRS 7369, BioSpectroscopie Translationnelle BioSpecT, Université de Reims Champagne Ardenne, Reims, France
    Julien BRAUX, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Cédric MAUPRIVEZ, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Halima KERDJOUDJ, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France

    topicA-03 Biomimetic and bioinspired materials
    person_pinHalima KERDJOUDJ, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    P35 - Biomimetic and bioinspired materials - Synthetic Biomimicking Lipid Coatings Enhance Hemocompatibility of Silica MicroparticlesBiomimetic and bioinspired materialsFrancisca Luisa FERNANDES GOMES, Leijten Lab, Department of Developmental BioEngineering, Faculty of Science and Technology, Technical Medical Centre, University of Twente, Enschede, The Netherlands
    Jasper VAN WEERD, LipoCoat BV, Enschede, Netherlands
    Pascal JONKHEIJM, Department of Molecules and Materials, Laboratory of Biointerface Chemistry, Faculty of Science and Technology, MESA+ Institute for Nanotechnology, University of Twente, Enschede, The Netherlands
    Jeroen LEIJTEN, Leijten Lab, Department of Developmental BioEngineering, Faculty of Science and Technology, Technical Medical Centre, University of Twente, Enschede, The Netherlands

    topicA-03 Biomimetic and bioinspired materials
    person_pinFrancisca Luisa FERNANDES GOMES, Leijten Lab, Department of Developmental BioEngineering, Faculty of Science and Technology, Technical Medical Centre, University of Twente, Enschede, The Netherlands
    P36 - Biomimetic and bioinspired materials - Design and production of a novel HELP-based component for antimicrobial surfaces functionalizationBiomimetic and bioinspired materialsLaura COLOMINA ALFARO, University of Trieste, Department of Life Sciences, Trieste, Italy
    Artemis STAMBOULI, University of Birmingham, School of Metallurgy and Materials
    Pietro RICCIO, University of Birmingham, School of Metallurgy and Materials
    Hanieh IJAKIPOUR, University of Birmingham, School of Metallurgy and Materials
    Antonella BANDIERA, University of Trieste, Department of Life Sciences

    topicA-03 Biomimetic and bioinspired materials
    person_pinLaura COLOMINA ALFARO, University of Trieste, Department of Life Sciences, Trieste, Italy
    P37 - Biomimetic and bioinspired materials - Utility of Chitin and Chitosan Derived from Tenebrio Molitor for Biomedical ApplicationsBiomimetic and bioinspired materialsNeda KHATAMI, 1-Center for Cooperative Research in Biomaterial (CIC biomaGUNE), Donostia-San Sebastian, Spain. 2- POLYMAT, University of the Basque Country UPV/EHU, San Sebastián, Gipuzkoa, Spain
    Pablo MARTIN ABAD, University of the Basque Country UPV/EHU, Bilbao, Spain
    Camarero-Espinosa SANDRA, 1- POLYMAT, University of the Basque Country UPV/EHU, San Sebastián, Gipuzkoa, Spain. 2- Ikerbasque, Basque Foundation for Science, Bilbao, Spain.
    Ander ABARRATEGI, 1- Center for Cooperative Research in Biomaterial (CIC biomaGUNE), Donostia-San Sebastian, Spain. 2- Ikerbasque, Basque Foundation for Science, Bilbao, Spain

    topicA-03 Biomimetic and bioinspired materials
    person_pinNeda KHATAMI, 1-Center for Cooperative Research in Biomaterial (CIC biomaGUNE), Donostia-San Sebastian, Spain. 2- POLYMAT, University of the Basque Country UPV/EHU, San Sebastián, Gipuzkoa, Spain
    P38 - Biomimetic and bioinspired materials - Suitability of octacalcium phosphate-carboxylates in mineralised collagen film productionBiomimetic and bioinspired materialsKatrina STAUNTON, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
    Thomas KRESS, Department of Chemistry, University of Cambridge, Cambridge, UK
    Melinda DUER, Department of Chemistry, University of Cambridge, Cambridge, UK
    Ruth CAMERON, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
    Serena BEST, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK

    topicA-03 Biomimetic and bioinspired materials
    person_pinKatrina STAUNTON, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
    P1 - Hydrogels - Novel Pulsed Electrodeposition Method for Hybrid Conductive Soft Hydrogel based on PEDOT/Alginate for Versatile Drug DeliveryHydrogelsArua DA SILVA, Implantable Bioelectronics Laboratory. Department of Automatic Control and Systems Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK
    Thomas PATERSON, Implantable Bioelectronics Laboratory. Department of Automatic Control and Systems Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK
    Ivan MINEV, Implantable Bioelectronics Laboratory. Department of Automatic Control and Systems Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK

    topicA-06 Hydrogels
    person_pinArua DA SILVA, Implantable Bioelectronics Laboratory. Department of Automatic Control and Systems Engineering, Faculty of Engineering, University of Sheffield, Sheffield, UK
    P2 - Hydrogels - Cytotoxicity of nitric oxide releasing Pluronic F-127 hydrogel containing silica nanoparticles loaded with cisplatin towards breast cancer cellHydrogelsAmedea BAROZZI SEABRA, Center for Natural and Human Sciences, Federal University of ABC, Santo André, Brazil
    Bianca DE MELO SANTANA, Federal University of ABC (UFABC)
    Joana CLAUDIO PIERETTI, Federal University of ABC (UFABC)
    Rafael NUNES GOMES, Federal University of ABC (UFABC)
    Giselle CERCHIARO, Federal University of ABC (UFABC)

    topicA-06 Hydrogels
    person_pinAmedea BAROZZI SEABRA, Center for Natural and Human Sciences, Federal University of ABC, Santo André, Brazil
    P3 - Hydrogels - Dynamic Hydrogel Bioinks for Tissue Regenerative ApplicationsHydrogelsTony FELICIANO, MERLN, Maastricht University, Maastricht, NL
    Matt B. BAKER, MERLN, Maastricht University

    topicA-06 Hydrogels
    person_pinTony FELICIANO, MERLN, Maastricht University, Maastricht, NL
    P4 - Hydrogels - Assessing Jellyfish Collagen Hydrogel for supporting Human OsteoblastsHydrogelsSwastina NATH VARMA, Institute of Orthopaedic and Musculoskeletal Science, University College London, Royal National Orthopaedic Hospital, Stanmore, London, UK
    Maryam TAMADDON, UCL
    Andrew MEARNS-SPRAGG, Jellagen
    Pascale GUILLOT, UCL
    Chaozong LIU, UCL

    topicA-06 Hydrogels
    person_pinChaozong LIU, UCL
    P5 - Hydrogels - Development of Functional Composite Hydrogels for Bone RegenerationHydrogelsAnna RUBINA, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Riga Technical University; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia
    Inta KREICBERGA, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Baltic Biomaterials Centre of Excellence
    Artemijs SCEGLOVS, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Baltic Biomaterials Centre of Excellence
    Kristine SALMA-ANCANE, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Baltic Biomaterials Centre of Excellence

    topicA-06 Hydrogels
    person_pinAnna RUBINA, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Riga Technical University; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia
    P6 - Hydrogels - Gelatin-alginate hydrogel enriched by dialdehyde starch or squaric acid as a new bio-inkHydrogelsJoanna SKOPINSKA-WISNIEWSKA, Faculty of Chemistry, Nicolaus Copernicus University in Torun, Poland
    Marta TUSZYNSKA, The Ludwik Rydygier Collegium Medicum in Bydgoszcz, Nicolaus Copernicus University in Torun
    Lukasz KAZMIERSKI, The Ludwik Rydygier Collegium Medicum in Bydgoszcz, Nicolaus Copernicus University in Torun
    Anna BAJEK, The Ludwik Rydygier Collegium Medicum in Bydgoszcz, Nicolaus Copernicus University in Torun

    topicA-06 Hydrogels
    person_pinJoanna SKOPINSKA-WISNIEWSKA, Faculty of Chemistry, Nicolaus Copernicus University in Torun, Poland
    P7 - Hydrogels - Hydrogel properties applied in contact lensesHydrogelsBarbara FARIAS MANCILLA, LCPO UMR5629, Université Bordeaux/ CNRS/ Ecole Nationale Supérieure de Chimie, de Biologie & de Physique, Pessac, France. Ophtalmic Compagnie, Villepinte, France
    Romain JAGU, Ophtalmic Compagnie, 33 rue des vanesses 93420 Villepinte, France
    Olivier SANDRE, LCPO UMR5629, Université Bordeaux/ CNRS/ Ecole Nationale Supérieure de Chimie, de Biologie & de Physique 16 Avenue Pey-Berland, 33607 Pessac Cedex, France. Ophtalmic Compagnie, 33 rue des vanesses 93420 Villepinte, France
    Simon HARRISSON, LCPO UMR5629, Université Bordeaux/ CNRS/ Ecole Nationale Supérieure de Chimie, de Biologie & de Physique 16 Avenue Pey-Berland, 33607 Pessac Cedex, France. Ophtalmic Compagnie, 33 rue des vanesses 93420 Villepinte, France

    topicA-06 Hydrogels
    person_pinBarbara FARIAS MANCILLA, LCPO UMR5629, Université Bordeaux/ CNRS/ Ecole Nationale Supérieure de Chimie, de Biologie & de Physique, Pessac, France. Ophtalmic Compagnie, Villepinte, France
    P8 - Hydrogels - Hydrogels based on chitosan with the addition of copper- and cobalt-doped mesoporous bioactive glassesHydrogelsSzymon SALAGIERSKI, Department of Glass Technology and Amorphous Coatings, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, 30 Mickiewicza Av., 30-059 Krakow, Poland
    Barbara ZAGRAJCZUK, Department of Glass Technology and Amorphous Coatings, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, 30 Mickiewicza Av., 30-059 Krakow, Poland
    Elzbieta MENASZEK, Department of Cytobiology, Faculty of Pharmacy, Jagiellonian University, Collegium Medicum, 9 Medyczna St. 30-688 Krakow, Poland
    Michal DZIADEK, Department of Glass Technology and Amorphous Coatings, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, 30 Mickiewicza Av., 30-059 Krakow, Poland; Faculty of Chemistry, Jagiellonian University, 2 Gronostajowa St., 30-387 Krakow, Poland
    Katarzyna CHOLEWA-KOWALSKA, Department of Glass Technology and Amorphous Coatings, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, 30 Mickiewicza Av., 30-059 Krakow, Poland

    topicA-06 Hydrogels
    person_pinSzymon SALAGIERSKI, Department of Glass Technology and Amorphous Coatings, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, 30 Mickiewicza Av., 30-059 Krakow, Poland
    P9 - Hydrogels - Characterization of Gelatin Hydrogels for 3D Bioprinting and Tissue EngineeringHydrogelsÁngela CASTRO MARÍA, Biomaterials and Regenerative Medicine group, IMDEA Materials Institute, Getafe, Madrid, Spain 28906
    Juan Pedro FERNANDEZ, Multifunctional Nanocomposites group, IMDEA Materials Institute, Getafe, Madrid, Spain 28906
    Jennifer PATTERSON, Biomaterials and Regenerative Medicine group, IMDEA Materials Institute, Getafe, Madrid, Spain 28906

    topicA-06 Hydrogels
    person_pinÁngela CASTRO MARÍA, Biomaterials and Regenerative Medicine group, IMDEA Materials Institute, Getafe, Madrid, Spain 28906
    P10 - Hydrogels - Strontium ranelate loaded epsilon-poly-L-lysine/hyaluronic acid hydrogelsHydrogelsEleonora RIEKSTA, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Riga, Latvia; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia
    Amanda VINCIUNE, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Riga, Latvia
    Dagnija LOCA, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Riga, Latvia; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia

    topicA-06 Hydrogels
    person_pinEleonora RIEKSTA, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Riga, Latvia; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia
    P11 - Hydrogels - Anisotropic conductive shape-memory g-C3N4/rGO hydrogel-based nerve guide conduitsHydrogelsJordi AMAGAT MOLAS, Department of Biological and Chemical Engineering, Aarhus University, Denmark, Sino-Danish College (SDC), University of Chinese Academy of Sciences, Beijing 101400, China.
    Frederik HØBJERG SVEJSØ, Department of Biological and Chemical Engineering, Aarhus University, Denmark
    Yingchun SU, Department of Biological and Chemical Engineering, Aarhus University, Denmark, School of Electrical Engineering and Computer Science, KTH Royal Institute of Technology, Electrum 229, 16440, Kista, Sweden
    Alice LE FRIEC, Department of Biological and Chemical Engineering, Aarhus University, Denmark
    Steffan MØLLER SØNDERSKOV, Interdisciplinary Nanoscience Center, iNANO, Aarhus University, Denmark
    Mingdong DONG, Interdisciplinary Nanoscience Center, iNANO, Aarhus University, Denmark
    Menglin CHEN, Department of Biological and Chemical Engineering, Aarhus University, Denmark, Interdisciplinary Nanoscience Center, iNANO, Aarhus University, Denmark

    topicA-06 Hydrogels
    person_pinJordi AMAGAT MOLAS, Department of Biological and Chemical Engineering, Aarhus University, Denmark, Sino-Danish College (SDC), University of Chinese Academy of Sciences, Beijing 101400, China.
    P12 - Hydrogels - Intravital 3D bioprinting of microfluidic networks for blood guidance in living organismsHydrogelsLuca BRANDOLINO, 1)Department of Industrial Engineering, University of Padova, Padova, Italy. 2)Veneto Institute of Molecular Medicine, Padova, Italy.
    Anna URCIUOLO, Department of Women’s and Children’s Health, University of Padova, Padova, Italy.
    Andrea MASET, 1)Department of Industrial Engineering, University of Padova, Padova, Italy. 2)Veneto Institute of Molecular Medicine, Padova, Italy.
    Carmela RIBECCO , 1)Department of Industrial Engineering, University of Padova, Padova, Italy. 2)Veneto Institute of Molecular Medicine, Padova, Italy.
    Pietro BELLET, 1)Department of Industrial Engineering, University of Padova, Padova, Italy. 2)Veneto Institute of Molecular Medicine, Padova, Italy.
    Assunta FABBOZZO , Department of Cardiac, Thoracic, Vascular Sciences and Public Health, University of Padua, 35128 Padua, Italy.
    Gino GEROSA, Department of Cardiac, Thoracic, Vascular Sciences and Public Health, University of Padua, 35128 Padua, Italy.
    Monica GIOMO, Department of Industrial Engineering, University of Padova, Padova, Italy.
    Nicola ELVASSORE, 1)Department of Industrial Engineering, University of Padova, Padova, Italy. 2)Veneto Institute of Molecular Medicine, Padova, Italy.3)University College London Great Ormond Street Institute of Child Health, London, UK.

    topicA-06 Hydrogels
    person_pinLuca BRANDOLINO, 1)Department of Industrial Engineering, University of Padova, Padova, Italy. 2)Veneto Institute of Molecular Medicine, Padova, Italy.
    P13 - Hydrogels - Adhesive lignin reinforced hydrogels with conductive PEDOT:HA nanoparticle additives for sensing and electricity generation applications.HydrogelsCaitriona WINTERS, Stokes Labs, Bernal Institute, School of Engineering, University of Limerick, Ireland
    Mario CULEBRAS, Institute of Material Science, University of Valencia
    Maurice COLLINS, Stokes Labs, Bernal Institute, School of Engineering, University of Limerick, Ireland

    topicA-06 Hydrogels
    person_pinCaitriona WINTERS, Stokes Labs, Bernal Institute, School of Engineering, University of Limerick, Ireland
    P14 - Hydrogels - Scaffolds that meet the electrochemical balance of the native cartilage for the regeneration of osteoarthritic jointsHydrogelsGarazi LARRAÑAGA-JAURRIETA, BioSmarTE Lab, POLYMAT, University of the Basque Country UPV/EHU, Donostia / San Sebastián 20018; Regenerative Medicine Lab, CICbiomaGUNE, Donostia / San Sebastián 20014, Gipuzkoa, Spain
    Ander ABARRATEGI, Regenerative Medicine Lab (CICbiomaGUNE)
    Sandra CAMARERO-ESPINOSA, BioSmarTE lab (POLYMAT) and IKERBASQUE

    topicA-06 Hydrogels
    person_pinGarazi LARRAÑAGA-JAURRIETA, BioSmarTE Lab, POLYMAT, University of the Basque Country UPV/EHU, Donostia / San Sebastián 20018; Regenerative Medicine Lab, CICbiomaGUNE, Donostia / San Sebastián 20014, Gipuzkoa, Spain
    P15 - Hydrogels - Non-Swellable Click Hydrogels Solely Composed of A Cold Water Fish Gelatin Polymer NetworkHydrogelsTobias HAMMER, Empa

    topicA-06 Hydrogels
    person_pinTobias HAMMER, Empa
    P16 - Hydrogels - Patterned hydrogels with spatially tunable biophysical and biochemical properties to guide 3D stem cell response and osteogenesisHydrogelsClaudia GARRIDO, Julius Wolff Institut, Berlin Institute of Health, Charité - Universitätsmedizin Berlin; Max Planck Institute for Colloids and Interfaces, Potsdam, Germany
    Daniela GARSKE, Julius Wolff Institut, Berlin Institute of Health, Charité - Universitätsmedizin Berlin; Max Planck Institute for Colloids and Interfaces
    Shahrouz AMINI, Max Planck Institute of Colloids and Interfaces
    Georg DUDA, Julius Wolff Institut, Berlin Institute of Health, Charité – Universitätsmedizin Berlin
    Katharina SCHMIDT-BLEEK, Julius Wolff Institut, Berlin Institute of Health, Charité - Universitätsmedizin Berlin
    Amaia CIPITRIA, Max Planck Institute of Colloids and Interfaces; Biodonostia Health research Institute; IKERBASQUE, Basque Foundation for Science

    topicA-06 Hydrogels
    person_pinClaudia GARRIDO, Julius Wolff Institut, Berlin Institute of Health, Charité - Universitätsmedizin Berlin; Max Planck Institute for Colloids and Interfaces, Potsdam, Germany
    P17 - Hydrogels - Cellulose-based hydrogel scaffolds for 3D in vitro cultivation of human MSCsHydrogelsIlias NIKOLITS, University of Natural Resources and Life Sciences, Vienna

    topicA-06 Hydrogels
    person_pinIlias NIKOLITS, University of Natural Resources and Life Sciences, Vienna
    P18 - Hydrogels - Generation of “elastic” organotypic skin culturesHydrogelsCristina QUÍLEZ LÓPEZ, Department of Bioengineering and Aerospace engineering, Universidad Carlos III de Madrid, Leganés, Spain
    Maria STOJIC, Department of Bioengineering and Aerospace engineering, Universidad Carlos III de Madrid, Leganés, Spain
    Maria Luisa LÓPEZ-DONAIRE, Department of Continuum Mechanics and Structural Analysis, Universidad Carlos III de Madrid, Leganés, Spain
    Jorge GONZÁLEZ-RICO IRIARTE, Department of Continuum Mechanics and Structural Analysis, Universidad Carlos III de Madrid, Leganés, Spain
    Daniel GRACÍA-GONZÁLEZ, Department of Continuum Mechanics and Structural Analysis, Universidad Carlos III de Madrid, Leganés, Spain
    Miguel GONZÁLEZ PÉREZ, BIOFORGE (Group for Advanced Materials and Nanobiotechnology), University of Valladolid, CIBER-BBN, 47011 Valladolid, Spain
    José Carlos RODRÍGUEZ-CABELLO, BIOFORGE (Group for Advanced Materials and Nanobiotechnology), University of Valladolid, CIBER-BBN, 47011 Valladolid, Spain
    José Luis JORCANO NOVAL, Department of Bioengineering and Aerospace engineering, Universidad Carlos III de Madrid, Leganés, Spain / Instituto de Investigación Sanitaria Gregorio Marañón, Madrid, Spain
    Israel GONZÁLEZ DE TORRE, BIOFORGE (Group for Advanced Materials and Nanobiotechnology), University of Valladolid, CIBER-BBN, 47011 Valladolid, Spain
    Diego VELASCO , Department of Bioengineering and Aerospace engineering, Universidad Carlos III de Madrid, Leganés, Spain / Instituto de Investigación Sanitaria Gregorio Marañón, Madrid, Spain

    topicA-06 Hydrogels
    person_pinCristina QUÍLEZ LÓPEZ, Department of Bioengineering and Aerospace engineering, Universidad Carlos III de Madrid, Leganés, Spain
    P19 - Hydrogels - Biologically Active Double Network Hydrogels Based on Chitosan Derivatives and Poly(Vinyl Alcohol) for Regeneration of Cartilage DefectsHydrogelsPatrycja DOMALIK-PYZIK, Department of Biomaterials and Composites, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Kraków, Poland
    Malwina FURGA?A, Department of Biomaterials and Composites, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Kraków, Poland

    topicA-06 Hydrogels
    person_pinPatrycja DOMALIK-PYZIK, Department of Biomaterials and Composites, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Kraków, Poland
    P20 - Hydrogels - Synthesis and Characterization of Novel Selanated Hydrogels for Tissue Engineering and 3D BioprintingHydrogelsMaria PEREZ-ARALUCE, University of Navarra

    topicA-06 Hydrogels
    person_pinMaria PEREZ-ARALUCE, University of Navarra
    P21 - Hydrogels - A composite Bioink Based on Gelatin/Cellulose Nanofibrils: Overcoming Remaining challenges HydrogelsSara NEJATI, McGill University
    Luc MONGEAU, McGill University

    topicA-06 Hydrogels
    person_pinSara NEJATI, McGill University
    P22 - Hydrogels - Hyaluronic Acid Hydrogels and the release of an Immunomodulating Parasitic Derived Peptide Therapeutic to overcome the Foreign Body ResponseHydrogelsVictoria WARD, 1- Anatomy and Regenerative Medicine Institute (REMEDI), College of Medicine, Nursing and Health Sciences, NUI Galway 2-SFI Advanced Materials and BioEngineering Research Centre (AMBER), Trinity College Dublin & NUI Galway
    Joanne O'DWYER, Anatomy and Regenerative Medicine Institute (REMEDI), College of Medicine, Nursing and Health Sciences, NUI Galway
    Lalor RICHARD, Center of One Health (COH) and Ryan Institute, School of Natural Science, NUI Galway
    John.P DALTON, Center of One Health (COH) and Ryan Institute, School of Natural Science, NUI Galway
    Garry DUFFY, 1 Anatomy and Regenerative Medicine Institute (REMEDI), College of Medicine, Nursing and Health Sciences, NUI Galway. 2 -SFI Advanced Materials and BioEngineering Research Centre (AMBER), Trinity College Dublin & NUI Galway 3-CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland Galway (NUIG) & RCSI, Galway, Ireland

    topicA-06 Hydrogels
    person_pinVictoria WARD, 1- Anatomy and Regenerative Medicine Institute (REMEDI), College of Medicine, Nursing and Health Sciences, NUI Galway 2-SFI Advanced Materials and BioEngineering Research Centre (AMBER), Trinity College Dublin & NUI Galway
    P24 - Hydrogels - Immunomodulatory Microgels for Wound Healing ApplicationsHydrogelsSepideh MOHAMMADI, Department of Mechanical Engineering, McGill University, Montreal, Canada
    Hossein RAVANBAKHSH, Department of Mechanical Engineering, McGill University, Montreal, QC H3A 0C3, Canada
    Sareh TAHERI, Department of Mechanical Engineering, McGill University, Montreal, QC H3A 0C3, Canada
    Guangyu BAO, Department of Mechanical Engineering, McGill University, Montreal, QC H3A 0C3, Canada
    Luc MONGEAU, Department of Mechanical Engineering, McGill University, Montreal, QC H3A 0C3, Canada

    topicA-06 Hydrogels
    person_pinSepideh MOHAMMADI, Department of Mechanical Engineering, McGill University, Montreal, Canada
    P25 - Hydrogels - A New Sequentially Functionalised Collagen I Based Visible Light Crosslinked Hydrogel for Chondrocyte EncapsulationHydrogelsAhranee CANDEN, Institute of Medical and Biological Engineering, University of Leeds, Leeds UK
    Hazel FERMOR, University of Leeds
    Xuebin YANG, University of Leeds
    Giuseppe TRONCI, University of Leeds
    Claire BROCKETT, University of Leeds

    topicA-06 Hydrogels
    person_pinAhranee CANDEN, Institute of Medical and Biological Engineering, University of Leeds, Leeds UK
    P27 - Hydrogels - Nanocomposite Hydrogel of Phosphorous-containing Nanocellulose and Bionanoceramics and Its Impact on the Osteogenic Differentiation of Osteoblasts in Scaffold Cell CultureHydrogelsQingbo WANG, Laboratory of Natural Materials Technology, Åbo Akademi University, Turku, Finland
    Özge KARADAS, Pharmaceutical Sciences Laboratory, Åbo Akademi University, Turku, Finland
    Tuomas NÄREOJA, Pharmaceutical Sciences Laboratory, Åbo Akademi University, Turku, Finland/Molecular Biotechnology & Diagnostics, Dept. of Life Technologies, University of Turku, Turku, Finland/Division of Pathology, Department of Laboratory Medicine, Karolinska Institutet, Huddinge, Sweden
    Xiaoju WANG, Laboratory of Natural Materials Technology&Pharmaceutical Sciences Laboratory, Åbo Akademi University, Turku, Finland.

    topicA-06 Hydrogels
    person_pinXiaoju WANG, Laboratory of Natural Materials Technology&Pharmaceutical Sciences Laboratory, Åbo Akademi University, Turku, Finland.
    P28 - Hydrogels - Swelling Force of Hydrogel Tissue Expander Induces Intestinal Lengthening HydrogelsSASZA CHYNTARA NABILLA, Department of Materials, University of Oxford, Oxford, United Kingdom
    Ren-Jei CHUNG, National Taipei University of Technology
    Jan Tadeusz CZERNUSZKA, University of Oxford

    topicA-06 Hydrogels
    person_pinSASZA CHYNTARA NABILLA, Department of Materials, University of Oxford, Oxford, United Kingdom
    P31 - Hydrogels - U Can’t Touch This: anti-adhesive PEG hydrogels with improved mechanical properties for blood-contacting devicesHydrogelsHelena P. FERREIRA, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal; ICBAS – Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, Porto, Portugal
    Duarte MOURA, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal; FEUP – Faculdade de Engenharia, Dep. Engenharia Metalúrgica e Materiais, Universidade do Porto, Portugal
    Andreia T. PEREIRA, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal
    Patrícia C. HENRIQUES, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal
    Cristina C. BARRIAS, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal; ICBAS – Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, Porto, Portugal
    Fernão D. MAGALHÃES, LEPABE – Laboratório de Engenharia de Processos, Ambiente, Biotecnologia e Energia, Faculdade de Engenharia da Universidade do Porto, Porto, Portugal
    Lorenzo MORONI, MERLN – Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, Netherlands
    Inês C. GONÇALVES, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal

    topicA-06 Hydrogels
    person_pinHelena P. FERREIRA, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal; ICBAS – Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, Porto, Portugal
    P32 - Hydrogels - Biomimetic Hydrogel Formulation via Machine Learning for Bio-printing HydrogelsAlexander STOKES, Schools of Engineering and Computing, Newcastle University Newcastle upon Tyne, UK
    Priscila MELO, Newcastle University
    Piergiorgio GENTILE, Newcastle University
    Jaume BACARDIT, Newcastle University
    Ana Marina FERREIRA, Newcastle University

    topicA-06 Hydrogels
    person_pinAlexander STOKES, Schools of Engineering and Computing, Newcastle University Newcastle upon Tyne, UK
    P33 - Hydrogels - Self-synthesizing materials for tissue culture applicationsHydrogelsKirill MIKHAILOV, Stratingh Institute for Chemistry, University of Groningen, the Netherlands
    Ivana MARIC, Stratingh Institute for Chemistry, University of Groningen, the Netherlands
    Liangliang YANG, University Medical Center Groningen, Department of Biomedical Engineering, W. J. Kolff Institute, University of Groningen, the Netherlands
    Reinier BRON, University Medical Center Groningen, Department of Biomedical Engineering, W. J. Kolff Institute, University of Groningen, the Netherlands
    Patrick VAN RIJN, University Medical Center Groningen, Department of Biomedical Engineering, W. J. Kolff Institute, University of Groningen, the Netherlands
    Sijbren OTTO, Stratingh Institute for Chemistry, University of Groningen, the Netherlands

    topicA-06 Hydrogels
    person_pinKirill MIKHAILOV, Stratingh Institute for Chemistry, University of Groningen, the Netherlands
    P34 - Hydrogels - Biopolymer hydrogels for 3D in vitro modelling of rheumatoid arthritis synovial tissue HydrogelsNora SELICATO, CNR NANOTEC - Institute of Nanotechnology ,Campus, Ecotekne, via Monteroni, 73100 Lecce, Italy
    Antonella STANZIONE, CNR NANOTEC - Institute of Nanotechnology, Campus Ecotekne, via Monteroni, 73100 Lecce, Italy; Dipartimento di Matematica e Fisica E. de Giorgi, Università Del Salento, Campus Ecotekne, via Monteroni, 73100 Lecce, Italy
    Beatrice VILARDO, Dipartimento di Scienze della Salute, Interdisciplinary Research Center of Autoimmune Diseases-IRCAD, Università del Piemonte Orientale, Novara, Italy; Center for Translational Research on Autoimmune and Allergic Diseases, University of Piemonte Orientale, Novara, Italy
    Francesca SCALERA, CNR NANOTEC - Institute of Nanotechnology, Campus Ecotekne, via Monteroni, 73100 Lecce, Italy
    Annalisa CHIOCCHETTI, Dipartimento di Scienze della Salute, Interdisciplinary Research Center of Autoimmune Diseases-IRCAD, Università del Piemonte Orientale, Novara, Italy; Center for Translational Research on Autoimmune and Allergic Diseases, University of Piemonte Orientale, Novara, Italy
    Alessandro POLINI, CNR NANOTEC – Institute of Nanotechnology, Lecce, Italy
    Francesca GERVASO, CNR NANOTEC - Institute of Nanotechnology, Campus Ecotekne, via Monteroni, 73100 Lecce, Italy

    topicA-06 Hydrogels
    person_pinAlessandro POLINI, CNR NANOTEC – Institute of Nanotechnology, Lecce, Italy
    P37 - Hydrogels - UV-Cured Collagen Networks as Building Blocks for Advanced Wound DressingsHydrogelsCharles BROOKER, Clothworkers’ Centre for Textile Materials Innovation for Healthcare (CCTMIH), School of Design & School of Dentistry, St. James’s University Hospital, University of Leeds, Leeds, UK
    Giuseppe TRONCI, University of Leeds

    topicA-06 Hydrogels
    person_pinCharles BROOKER, Clothworkers’ Centre for Textile Materials Innovation for Healthcare (CCTMIH), School of Design & School of Dentistry, St. James’s University Hospital, University of Leeds, Leeds, UK
    P38 - Hydrogels - Self-assembling peptide gels for articular patella cartilage repairHydrogelsJames WARREN, Institute of Biological and Medical Engineering, University of Leeds; Faculty of Biological Sciences, University of Leeds; Bragg Centre for Materials Research, University of Leeds, Leeds, UK
    Raelene COWIE, University of Leeds
    Louise JENNINGS, University of Leeds
    Ruth WILCOX, University of Leeds
    Hazel FERMOR, University of Leeds

    topicA-06 Hydrogels
    person_pinJames WARREN, Institute of Biological and Medical Engineering, University of Leeds; Faculty of Biological Sciences, University of Leeds; Bragg Centre for Materials Research, University of Leeds, Leeds, UK
    P39 - Hydrogels - Radiopaque Laponite® crosslinked pNIPAM-co-DMAc hydrogel for Tissue RegenerationHydrogelsRpnak JANANI, Sheffield Hallam University
    Abdusalam ESSA, Sheffield Hallam University
    Christine LE MAITRE, Sheffield Hallam University
    Chris SAMMON, Materials and Engineering Research Institute, Sheffield Hallam University, Sheffield, UK

    topicA-06 Hydrogels
    person_pinChris SAMMON, Materials and Engineering Research Institute, Sheffield Hallam University, Sheffield, UK
    P40 - Hydrogels - Printing versatility of a novel hydrogel material as a key to tissue engineering applicationsHydrogelsMartina MEAZZO, Ghent University, Ghent, BE
    Fabrizio BARBERIS, Genova University
    Catherine VAN DER STRAETEN, Gent University
    Peter DUBRUEL, Gent University

    topicA-06 Hydrogels
    person_pinMartina MEAZZO, Ghent University, Ghent, BE
    P41 - Hydrogels - Light and temperature dual-responsive interpenetrating polymer network for mimicking muscle tissue ECMHydrogelsAntonella STANZIONE, Dipartimento di Matematica e Fisica E. De Giorgi, University of Salento; CNR-Nanotec, Institute of Nanotechnology, Lecce, Italy
    Alessandro POLINI, CNR-Nanotec, Institute of Nanotechnology, 73100 Lecce, Italy
    Francesca SCALERA, CNR-Nanotec, Institute of Nanotechnology, 73100 Lecce, Italy
    Francesca GERVASO, CNR-Nanotec, Institute of Nanotechnology, 73100 Lecce, Italy

    topicA-06 Hydrogels
    person_pinAntonella STANZIONE, Dipartimento di Matematica e Fisica E. De Giorgi, University of Salento; CNR-Nanotec, Institute of Nanotechnology, Lecce, Italy
    P42 - Hydrogels - A SMART BIOMATERIAL PLATFORM FOR 2D-GROWN hMSC OSTEOGENIC DIFFERENTIATIONHydrogelsMichele VALEO, Université de Bordeaux, Chimie et Biologie des Membranes et Nano-Objets (UMR5248 CBMN); CNRS, CBMN UMR5248; Bordeaux INP, CBMN UMR5248, Pessac, France
    Murielle REMY, University of Bordeaux
    Laura GUEE, Company
    Cécile FEUILLIE, University of Bordeaux
    Christel CHANSEAU, University of Bordeaux
    Sébastien MARIE, Company
    Michael MOLINARI, University of Bordeaux
    Marie-Christine DURRIEU, University of Bordeaux

    topicA-06 Hydrogels
    person_pinMichele VALEO, Université de Bordeaux, Chimie et Biologie des Membranes et Nano-Objets (UMR5248 CBMN); CNRS, CBMN UMR5248; Bordeaux INP, CBMN UMR5248, Pessac, France
    P43 - Hydrogels - Differentiation of NSC-34 cells toward motor neuron-like phenotype in a 3D thermosensitive chitosan-based ECM model HydrogelsAntonella STANZIONE, Dipartimento di Matematica e Fisica E. De Giorgi, University of Salento; CNR-Nanotec, Institute of Nanotechnology, Lecce, Italy
    Alessandro POLINI, CNR-Nanotec, Institute of Nanotechnology, 73100 Lecce, Italy
    Velia LA PESA, IRCCS San Raffaele Scientific Institute, Neuropathology Unit, Institute of Experimental Neurology and Division of Neuroscience, 20132 Milan, Italy
    Angelo QUATTRINI, IRCCS San Raffaele Scientific Institute, Neuropathology Unit, Institute of Experimental Neurology and Division of Neuroscience, 20132 Milan, Italy
    Alessandro ROMANO, IRCCS San Raffaele Scientific Institute, Neuropathology Unit, Institute of Experimental Neurology and Division of Neuroscience, 20132 Milan, Italy
    Giuseppe GIGLI, CNR-Nanotec, Institute of Nanotechnology, 73100 Lecce, Italy
    Lorenzo MORONI, Complex Tissue Regeneration, Maastricht University, 6229 ER Maastricht, The Netherlands
    Francesca GERVASO, CNR-Nanotec, Institute of Nanotechnology, 73100 Lecce, Italy

    topicA-06 Hydrogels
    person_pinAntonella STANZIONE, Dipartimento di Matematica e Fisica E. De Giorgi, University of Salento; CNR-Nanotec, Institute of Nanotechnology, Lecce, Italy
    P44 - Hydrogels - Biofabrication of Atherosclerotic Plaques to Develop Ex-Vivo Stenotic Artery ModelHydrogelsPriusha RAVIPATI, LaBS, Department of Chemistry, Materials and Chemical Engineering ‘Giulio Natta’, Politecnico di Milano, Milan, Italy
    Federica POTERE, LaBS, Department of Chemistry, Materials and Chemical Engineering ‘Giulio Natta’, Politecnico di Milano, Milan, Italy
    Sara MANTERO, LaBS, Department of Chemistry, Materials and Chemical Engineering ‘Giulio Natta’, Politecnico di Milano, Milan, Italy
    Giancarlo PENNATI, LaBS, Department of Chemistry, Materials and Chemical Engineering ‘Giulio Natta’, Politecnico di Milano, Milan, Italy

    topicA-06 Hydrogels
    person_pinPriusha RAVIPATI, LaBS, Department of Chemistry, Materials and Chemical Engineering ‘Giulio Natta’, Politecnico di Milano, Milan, Italy
    P45 - Hydrogels - Insight into the repercussions of magnetically oriented PEG microgels regarding structure, fiber properties and cell behavior in collagen hydrogelsHydrogelsAna Luísa CASTRO, i3S - Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Portugal; INEB - Instituto de Engenharia Biomédica, Universidade do Porto, Portugal; ICBAS - Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, Portugal;
    Sitara VEDARAMAN, Department of Advanced Materials for Biomedicine, Institute of Applied Medical Engineering, RWTH Aachen University, Aachen, Germany; Department of Technical and Macromolecular Chemistry, RWTH Aachen University, Aachen, Germany
    Mário A. BARBOSA, i3S - Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Portugal; INEB - Instituto de Engenharia Biomédica, Universidade do Porto, Portugal; ICBAS - Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, Portugal;
    Raquel M. GONÇALVES, i3S - Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Portugal; INEB - Instituto de Engenharia Biomédica, Universidade do Porto, Portugal; ICBAS - Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, Portugal;
    Laura DE LAPORTE, DWI—Leibniz Institute for Interactive Materials, Aachen, Germany; Department of Advanced Materials for Biomedicine, Institute of Applied Medical Engineering, RWTH Aachen University, Aachen, Germany; Department of Technical and Macromolecular Chemistry, RWTH Aachen University, Aachen, Germany

    topicA-06 Hydrogels
    person_pinAna Luísa CASTRO, i3S - Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Portugal; INEB - Instituto de Engenharia Biomédica, Universidade do Porto, Portugal; ICBAS - Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, Portugal;
    P47 - Hydrogels - Chemically-modified natural hydrogels for the design of double network 3D printed scaffolds HydrogelsUgo D'AMORA, Institute of Polymers, Composites and Biomaterials, National Research Council, Naples, Italy
    Alfredo RONCA, Institute of Polymers, Composites and Biomaterials, National Research Council, Naples, Italy
    Luigi AMBROSIO, Institute of Polymers, Composites and Biomaterials, National Research Council, Naples, Italy

    topicA-06 Hydrogels
    person_pinAlfredo RONCA, Institute of Polymers, Composites and Biomaterials, National Research Council, Naples, Italy
    P48 - Hydrogels - Designing a new in situ forming injectable hydrogel based on Schiff base linkages as platform for tissue engineering applicationsHydrogelsRoberta PAPPALARDO, Politecnico di Torino, Department of Mechanical and Aerospace Engineering, Turin, Italy
    Monica BOFFITO, Politecnico di Torino, Department of Mechanical and Aerospace Engineering, Turin, Italy; Istituto per i Processi Chimico-Fisici, Consiglio Nazionale delle Ricerche, Pisa, Italy
    Rossella LAURANO, Politecnico di Torino, Department of Mechanical and Aerospace Engineering, Turin, Italy
    Valeria CHIONO, Politecnico di Torino, Department of Mechanical and Aerospace Engineering, Turin, Italy; Istituto per i Processi Chimico-Fisici, Consiglio Nazionale delle Ricerche, Pisa, Italy
    Gianluca CIARDELLI, Politecnico di Torino, Department of Mechanical and Aerospace Engineering, Turin, Italy; Istituto per i Processi Chimico-Fisici, Consiglio Nazionale delle Ricerche, Pisa, Italy

    topicA-06 Hydrogels
    person_pinRoberta PAPPALARDO, Politecnico di Torino, Department of Mechanical and Aerospace Engineering, Turin, Italy
    P49 - Hydrogels - Monophasic Hyaluronic Acid-Silica Hybrid Hydrogels with Tunable Mechanical Properties for Articular Cartilage ApplicationsHydrogelsHuijun ZHANG, Institute of Biomaterials, Friedrich-Alexander-Universität Erlangen-Nuremberg, Erlangen, Germany
    Aldo BOCCACCINI, Institute of Biomaterials, Friedrich-Alexander-Universität Erlangen-Nuremberg, Erlangen, Germany

    topicA-06 Hydrogels
    person_pinHuijun ZHANG, Institute of Biomaterials, Friedrich-Alexander-Universität Erlangen-Nuremberg, Erlangen, Germany
    P50 - Hydrogels - Spatial-controlled coating of proangiogenic proteins on 3D porous hydrogels guides endothelial cell behaviorsHydrogelsChau LE BAO, INSERM U1148, Université Paris Cité, X Bichat Hôpital, Paris, France; Université Sorbonne Paris Nord, Galilée Institute, Villetaneuse, France
    Helen WALLER, Newcastle University, Newcastle upon Tyne NE1 7RU, United Kingdom
    Daniel PETERS, Newcastle University, Newcastle upon Tyne NE1 7RU, United Kingdom
    Jeremy LAKEY, Newcastle University, Newcastle upon Tyne NE1 7RU, United Kingdom
    Didier LETOURNEUR, INSERM U1148, Université de Paris, X Bichat Hospital, 75018 Paris, France
    Frédéric CHAUBET, INSERM U1148, Université Paris Cité, X Bichat Hôpital, 75018 Paris, France; Université Sorbonne Paris Nord, Galilée Institute, 93430 Villetaneuse, France
    Teresa SIMON-YARZA, INSERM U1148, Université Paris Cité, X Bichat Hôpital, 75018 Paris, France

    topicA-06 Hydrogels
    person_pinChau LE BAO, INSERM U1148, Université Paris Cité, X Bichat Hôpital, Paris, France; Université Sorbonne Paris Nord, Galilée Institute, Villetaneuse, France
    P51 - Hydrogels - Injectable collagen/MSCs microspheres for pulmonary tissue regenerationHydrogelsFrancesca DELLA SALA, Institute of Polymers, Composite and Biomaterials (IPCB), National Research Council (CNR) of Italy
    Gennaro LONGOBARDO, University of Naples Federico II, Naples, Italy
    Mario DI GENNARO, Institute of Polymers, Composite and Biomaterials (IPCB), National Research Council (CNR) of Italy
    Luigi AMBROSIO, Institute of Polymers, Composite and Biomaterials (IPCB), National Research Council (CNR) of Italy
    Assunta BORZACCHIELLO, Institute of Polymers, Composite and Biomaterials (IPCB), National Research Council (CNR) of Italy

    topicA-06 Hydrogels
    person_pinFrancesca DELLA SALA, Institute of Polymers, Composite and Biomaterials (IPCB), National Research Council (CNR) of Italy
    P52 - Hydrogels - Cellulose based Injectable bio-composites for Bone Tissue RegenerationHydrogelsAngelo SCIULLO, Politecnico di Milano
    Andrea FIORATI, Politecnico di Milano
    Maria Grazia RAUCCI, National Research Council
    Lina ALTOMARE, Politecnico di Milano

    topicA-06 Hydrogels
    person_pinLina ALTOMARE, Politecnico di Milano
    P53 - Hydrogels - Advancements in the production of self-esterified-Hyaluronan hydrogels and their potential in tissue regenerationHydrogelsEmiliano BEDINI, University of Naples Federico II
    Elisabetta CASSESE, University of Campania "Luigi Vanvitelli"
    Antonella D'AGOSTINO, University of Campania "Luigi Vanvitelli"
    Marcella CAMMAROTA, University of Campania "Luigi Vanvitelli"
    Chiara SCHIRALDI, University of Campania "Luigi Vanvitelli"
    Annalisa LA GATTA, University of Campania "Luigi Vanvitelli"

    topicA-06 Hydrogels
    person_pinAnnalisa LA GATTA, University of Campania "Luigi Vanvitelli"
    P54 - Hydrogels - Tuning of mechanical properties in photopolymerizable gelatin-based hydrogels for in vitro intestinal epithelial modelsHydrogelsRegina PAMPLONA CURIEL, Aragón Institute of Nanoscience and Materials (INMA), CSIC-University of Zaragoza, Zaragoza, Spain
    Sandra GONZÁLEZ LANA, BEONCHIP S.L., Zaragoza, Spain / Aragón Institute of Engineering Research (I3A), University of Zaragoza, Zaragoza, Spain
    Ignacio OCHOA GARRIDO, Aragón Institute of Engineering Research (I3A), University of Zaragoza, Zaragoza, Spain / CIBER in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), Spain / Institute for Health Research Aragón (IIS Aragón), Zaragoza, Spain
    Rafael MARTÍN RAPÚN, Aragón Institute of Nanoscience and Materials (INMA), CSIC-University of Zaragoza, Zaragoza, Spain / CIBER in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), Spain
    Carlos SÁNCHEZ SOMOLINOS, Aragón Institute of Nanoscience and Materials (INMA), CSIC-University of Zaragoza, Zaragoza, Spain / CIBER in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), Spain

    topicA-06 Hydrogels
    person_pinRegina PAMPLONA CURIEL, Aragón Institute of Nanoscience and Materials (INMA), CSIC-University of Zaragoza, Zaragoza, Spain
    P55 - Hydrogels - Gelatin modified with alkoxysilanes (GelmSi): a new hybrid polymer dedicated to bioengineering applicationsHydrogelsMatthieu SIMON, CHU / IRMB
    Marie MAUMUS, Bauerfeind / IRMB
    Baptiste LEGRAND, IBMM / UM
    Marjorie DUFAUD, IRMB / INSERM
    Christian JORGENSEN, CHU / IRMB
    Danièle NOËL, IRMB / INSERM
    Gilles SUBRA, IBMM / UM

    topicA-06 Hydrogels
    person_pinMatthieu SIMON, CHU / IRMB
    P56 - Hydrogels - Programmable DNA-Crosslinked Hydrogels as Adaptive Matrices for 3D Cell CultureHydrogelsYu Hsuan PENG, Leibniz-Institut für Polymerforschung Dresden e. V., Germany
    Krishna GUPTA, Leibniz-Institut für Polymerforschung Dresden e. V., Germany
    Syuan-Ku HSIAO, Leibniz-Institut für Polymerforschung Dresden e. V., Germany
    André RULAND, Leibniz-Institut für Polymerforschung Dresden e. V., Germany
    Günter K. AUERNHAMMER, Leibniz-Institut für Polymerforschung Dresden e. V., Germany
    Carsten WERNER, Leibniz-Institut für Polymerforschung Dresden e. V., Germany
    Elisha KRIEG, Leibniz-Institut für Polymerforschung Dresden e. V., Germany

    topicA-06 Hydrogels
    person_pinYu Hsuan PENG, Leibniz-Institut für Polymerforschung Dresden e. V., Germany
    P57 - Hydrogels - Collagen/hyaluronan polyionic complexes as a new building block to develop a novel bioink to model the intervertebral discHydrogelsStéphanie DE OLIVEIRA, Laboratoire de Chimie de la Matière Condensée de Paris, Paris, France
    Gregor MIKLOSIC, AO Research Institute, AO Foundation, Davos, Switzerland
    Matteo D'ESTE, AO Research Institute, AO Foundation, Davos, Switzerland
    Sébastien GRASTILLEUR, Laboratoire Regenerative Medicine and Skeleton, Nantes, France
    Joëlle VÉZIERS, Laboratoire Regenerative Medicine and Skeleton, Nantes, France
    Christophe HÉLARY, Laboratoire de Chimie de la Matière Condensée de Paris, Paris, France

    topicA-06 Hydrogels
    person_pinStéphanie DE OLIVEIRA, Laboratoire de Chimie de la Matière Condensée de Paris, Paris, France
    P58 - Hydrogels - Basic characterization of gelatin_k-carrageenan hydrogels as potential novel biomaterials for biomedical application HydrogelsMarta TUSZYNSKA, Faculty of Medicine, Department of Tissue Engineering, The Ludwik Rydygier Collegium Medicum in Bydgoszcz, Nicolaus Copernicus University in Torun, Poland
    Joanna SKOPINSKA-WISNIEWSKA, Faculty of Chemistry, Nicolaus Copernicus University in Torun, Poland
    Jakub MARCHEWKA, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Krakow, Poland
    Piotr JELEN, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Krakow, Poland
    Maciej BIK, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Krakow, Poland
    Anna BAJEK, Faculty of Medicine, Department of Tissue Engineering, The Ludwik Rydygier Collegium Medicum in Bydgoszcz, Nicolaus Copernicus University in Torun, Poland

    topicA-06 Hydrogels
    person_pinMarta TUSZYNSKA, Faculty of Medicine, Department of Tissue Engineering, The Ludwik Rydygier Collegium Medicum in Bydgoszcz, Nicolaus Copernicus University in Torun, Poland
    P59 - Hydrogels - Chemically Crosslinked Hyaluronic Acid-Chitosan Scaffolds for Potential Application on Cartilage Regeneration HydrogelsSandra ESCALANTE, Universidad de Málaga
    José BECERRA, Universidad de Málaga
    Julio SAN ROMÁN, Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC)
    María Rosa AGUILAR, Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC)
    Ivan DURAN, Universidad de Málaga
    Luis GARCÍA-FERNÁNDEZ, Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC)

    topicA-06 Hydrogels
    person_pinLuis GARCÍA-FERNÁNDEZ, Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC)
    P60 - Hydrogels - Characterization and Mechanical Properties of AgNPs/Gelatin/PEGDA Hydrogels for Wound DressingHydrogelsTugce SENER RAMAN , Leibniz-Institute of Surface Engineering (IOM)
    Stefan G. MAYR, Leibniz-Institute of Surface Engineering (IOM)
    Bernd ABEL, Leibniz-Institute of Surface Engineering (IOM)
    Agnes SCHULZE , Leibniz-Institute of Surface Engineering (IOM)

    topicA-06 Hydrogels
    person_pinTugce SENER RAMAN , Leibniz-Institute of Surface Engineering (IOM)
    P61 - Hydrogels - Engineering Hydrogels with Tunable Mechanical Properties for Targeted Stem Cell DifferentiationHydrogelsCristina LOPEZ-SERRANO, 1 Laboratoire d’Ingénierie de Surface, Département de génie des mines, de la métallurgie et des matériaux, Université Laval, Québec, Canada, 2Axe Médecine Régénératrice, Centre de recherche du CHU de Québec-Université Laval, Hôpital St-François d’Assise, Québec, Canada, 3Université de Bordeaux, Chimie et Biologie des Membranes et Nano-Objets (UMR5248 CBMN), Pessac, France, 4CNRS, CBMN UMR5248, Pessac, France, 5Bordeaux INP, CBMN UMR5248, Pessac, France
    Murielle REMY, 3Université de Bordeaux, Chimie et Biologie des Membranes et Nano-Objets (UMR5248 CBMN), Pessac, France, 4CNRS, CBMN UMR5248, Pessac, France, 5Bordeaux INP, CBMN UMR5248, Pessac, France
    Christel CHANSEAU, 3Université de Bordeaux, Chimie et Biologie des Membranes et Nano-Objets (UMR5248 CBMN), Pessac, France, 4CNRS, CBMN UMR5248, Pessac, France, 5Bordeaux INP, CBMN UMR5248, Pessac, France
    Andrée-Anne GUAY-BÉGIN, 1 Laboratoire d’Ingénierie de Surface, Département de génie des mines, de la métallurgie et des matériaux, Université Laval, Québec, Canada, 2Axe Médecine Régénératrice, Centre de recherche du CHU de Québec-Université Laval, Hôpital St-François d’Assise, Québec, Canada
    Jean RUEL, 6De?partement de Ge?nie me?canique, Universite? Laval, Que?bec, Canada, 2Axe Médecine Régénératrice, Centre de recherche du CHU de Québec-Université Laval, Hôpital St-François d’Assise, Québec, Canada
    Cécile FEUILLE, 3Université de Bordeaux, Chimie et Biologie des Membranes et Nano-Objets (UMR5248 CBMN), Pessac, France, 4CNRS, CBMN UMR5248, Pessac, France, 5Bordeaux INP, CBMN UMR5248, Pessac, France
    Michael MOLINARI, 3Université de Bordeaux, Chimie et Biologie des Membranes et Nano-Objets (UMR5248 CBMN), Pessac, France, 4CNRS, CBMN UMR5248, Pessac, France, 5Bordeaux INP, CBMN UMR5248, Pessac, France
    Gaétan LAROCHE, 1 Laboratoire d’Ingénierie de Surface, Département de génie des mines, de la métallurgie et des matériaux, Université Laval, Québec, Canada, 2Axe Médecine Régénératrice, Centre de recherche du CHU de Québec-Université Laval, Hôpital St-François d’Assise, Québec, Canada
    Marie-Christine DURRIEU, 3Université de Bordeaux, Chimie et Biologie des Membranes et Nano-Objets (UMR5248 CBMN), Pessac, France, 4CNRS, CBMN UMR5248, Pessac, France, 5Bordeaux INP, CBMN UMR5248, Pessac, France

    topicA-06 Hydrogels
    person_pinCristina LOPEZ-SERRANO, 1 Laboratoire d’Ingénierie de Surface, Département de génie des mines, de la métallurgie et des matériaux, Université Laval, Québec, Canada, 2Axe Médecine Régénératrice, Centre de recherche du CHU de Québec-Université Laval, Hôpital St-François d’Assise, Québec, Canada, 3Université de Bordeaux, Chimie et Biologie des Membranes et Nano-Objets (UMR5248 CBMN), Pessac, France, 4CNRS, CBMN UMR5248, Pessac, France, 5Bordeaux INP, CBMN UMR5248, Pessac, France
    P62 - Hydrogels - Development of a Structured Fluid Spray to Prevent Oral Scarring in Epidermolysis Bullosa PatientsHydrogelsThomas ROBINSON, University of Birmingham
    Richard MOAKES, University of Birmingham
    Iain CHAPPLE, University of Birmingham
    Adrian HEAGERTY, University of Birmingham
    Anthony METCALFE, University of Birmingham
    Liam GROVER, University of Birmingham

    topicA-06 Hydrogels
    person_pinThomas ROBINSON, University of Birmingham
    P63 - Hydrogels - Self-assembling peptide hydrogels for nucleus augmentation of the intervertebral discHydrogelsMatthew CULBERT, University of Leeds
    James WARREN, University of Leeds
    Hazel FERMOR, University of Leeds
    Paul BEALES, University of Leeds
    Ruth WILCOX, University of Leeds

    topicA-06 Hydrogels
    person_pinMatthew CULBERT, University of Leeds
    P65 - Hydrogels - Evaluation of enzymatic in-situ Crosslinking for the development of soft tissue engineering matricesHydrogelsSonja KUTH, Institute of Biomaterials, Friedrich-Alexander-Universität Erlangen-Nuremberg, Erlangen, Germany
    Aldo R. BOCCACCINI, Institute of Biomaterials, Friedrich-Alexander-Universität Erlangen-Nuremberg, Erlangen, Germany

    topicA-06 Hydrogels
    person_pinSonja KUTH, Institute of Biomaterials, Friedrich-Alexander-Universität Erlangen-Nuremberg, Erlangen, Germany
    P66 - Hydrogels - Phenolic agent as an addition to alginate-based hydrogels for 3D printing and drug delivery approachesHydrogelsFaina BIDER, Institute of Biomaterials, Friedrich-Alexander-Universität Erlangen-Nuremberg, Erlangen, Germany
    Marta MIOLA, Applied Science and Technology Department, Politecnico di Torino, Torino, Italy
    Enrica VERNÈ, Applied Science and Technology Department, Politecnico di Torino, Torino, Italy
    Aldo R. BOCCACCINI, Institute of Biomaterials, Friedrich-Alexander-Universität Erlangen-Nuremberg, Erlangen, Germany

    topicA-06 Hydrogels
    person_pinFaina BIDER, Institute of Biomaterials, Friedrich-Alexander-Universität Erlangen-Nuremberg, Erlangen, Germany
    P69 - Hydrogels - Natural polymer-based bioinks for in situ bioprintingHydrogelsNicola CONTESSI NEGRINI, Department of Bioengineering, Imperial College London, London, UK
    Alexandros MAKRYPIDIS, Department of Bioengineering, Imperial College London, London, UK
    Dominic J WALES, Hamlyn Centre, Institute of Global Health Innovation, Imperial College London, London, UK
    Muhsincan SESEN, Department of Bioengineering, Imperial College London, London, UK
    Adam CELIZ, Department of Bioengineering, Imperial College London, London, UK

    topicA-06 Hydrogels
    person_pinNicola CONTESSI NEGRINI, Department of Bioengineering, Imperial College London, London, UK
    P70 - Hydrogels - Extracting ready-to-use silkworm sericin: finding the best starting point HydrogelsAnabela VEIGA, CBQF , LEPABE and CSIC
    Filipa CASTRO, LEPABE
    Fernando ROCHA, LEPABE
    Blanca VÁZQUEZ-LASA, ICTP-CSIC and CIBER-BBN
    Luis ROJO, ICTP-CSIC and CIBER-BBN
    Ana L. OLIVEIRA , CBQF

    topicA-06 Hydrogels
    person_pinAnabela VEIGA, CBQF , LEPABE and CSIC
    P71 - Hydrogels - Dual-Functional Polysaccharide Microgels Modulated by Therapeutic Metal IonsHydrogelsAndrea LONCAREVIC, Faculty of Chemical Engineering and Technology, University of Zagreb
    Karla OSTOJIC, Faculty of Science, University of Zagreb
    Teodoro KLASER, Faculty of Science, University of Zagreb
    Inga URLIC, Faculty of Science, University of Zagreb
    Anamarija ROGINA, Faculty of Chemical Engineering and Technology, University of Zagreb

    topicA-06 Hydrogels
    person_pinAndrea LONCAREVIC, Faculty of Chemical Engineering and Technology, University of Zagreb
    P72 - Hydrogels - Alginate-Based Biocomposites Hydrogels Reinforced with Natural Polymers Used in Tissue Engineering: Structural and Physicochemical PropertiesHydrogelsAlexandra FERARU, Interdisciplinary Research Institute on Bio-Nano-Sciences, Babes-Bolyai University, Cluj-Napoca, România; Doctoral School of Physics, Babes-Bolyai University, Cluj-Napoca, România, Faculty of Physics, Babes-Bolyai University, Cluj-Napoca, România
    Zsejke-Réka TÓTH, Interdisciplinary Research Institute on Bio-Nano-Sciences, Babes-Bolyai University, Cluj-Napoca, România
    Klára MAGYARI, Interdisciplinary Research Institute on Bio-Nano-Sciences, Babes-Bolyai University, Cluj-Napoca, România; Department of Applied and Environmental Chemistry, Faculty of Science and Informatics, University of Szeged, Hungary
    Lucian BAIA, Interdisciplinary Research Institute on Bio-Nano-Sciences, Babes-Bolyai University, Cluj-Napoca, România; Faculty of Physics, Babes-Bolyai University, Cluj-Napoca, România

    topicA-06 Hydrogels
    person_pinAlexandra FERARU, Interdisciplinary Research Institute on Bio-Nano-Sciences, Babes-Bolyai University, Cluj-Napoca, România; Doctoral School of Physics, Babes-Bolyai University, Cluj-Napoca, România, Faculty of Physics, Babes-Bolyai University, Cluj-Napoca, România
    P74 - Hydrogels - Gellan Gum-Based Hydrogels for Extracellular Vesicles Delivery in Regenerative MedicineHydrogelsFranco FURLANI, National Research Council of Italy - Institute of Science and Technology for Ceramics
    Arianna ROSSI, National Research Council of Italy - Institute of Science and Technology for Ceramics
    Giada BASSI, National Research Council of Italy - Institute of Science and Technology for Ceramics
    Monica MONTESI, National Research Council of Italy - Institute of Science and Technology for Ceramics
    Silvia PANSERI, National Research Council of Italy - Institute of Science and Technology for Ceramics

    topicA-06 Hydrogels
    person_pinSilvia PANSERI, National Research Council of Italy - Institute of Science and Technology for Ceramics
    P75 - Hydrogels - Elaboration of Injectable Thermosensitive Hydrogels Based on Infernan: a Marine GlycosaminoglycanMimetic Exopolysaccharide for Tissue EngineeringHydrogelsArnaud FILLAUDEAU, IFREMER
    Agata ZYKWINSKA, IFREMER
    Corinne SINQUIN , IFREMER
    Laetitia MARCHAND, IFREMER
    Stéphane CUENOT, IMN
    Sylvia COLLIEC JOUAULT, IFREMER

    topicA-06 Hydrogels
    person_pinArnaud FILLAUDEAU, IFREMER
    P78 - Hydrogels - Fine-tuning the hydrogels porosity: a reliable strategy for controlling the drug delivery featuresHydrogelsIoana DUCEAC, Petru Poni Institute of Macromolecular Chemistry
    Sergiu COSERI, Petru Poni Institute of Macromolecular Chemistry

    topicA-06 Hydrogels
    person_pinIoana DUCEAC, Petru Poni Institute of Macromolecular Chemistry
    P82 - Hydrogels - A smart bioprintable Gellan Gum/Lignin hydrogel for cartilage regenerationHydrogelsMaria A. BONIFACIO, University of Bari, Italy
    Stefania COMETA, Jaber Innovation srl, Italy
    Andrea COCHIS, University of Piemonte Orientale UPO, Italy
    Annachiara SCALZONE, Newcastle University, United Kingdom
    Piergiorgio GENTILE, Newcastle University, United Kingdom
    Alessandro C. SCALIA, University of Piemonte Orientale UPO, Italy
    Lia RIMONDINI, University of Piemonte Orientale UPO, Italy
    Piero MATRORILLI, Politecnico di Bari, Italy
    Elvira DE GIGLIO, University of Bari, Italy

    topicA-06 Hydrogels
    person_pinAndrea COCHIS, University of Piemonte Orientale UPO, Italy
    P1 - Nanobiomaterials - Electrohydrodynamics based functional nanofibers electrically stimulate neuron regenerationNanobiomaterialsChristoph MÜLLER, Aarhus University
    Menglin CHEN, Department of Biological and Chemical Engineering, Aarhus University, Aarhus, Denmark

    topicA-07 Nano-biomaterials
    person_pinMenglin CHEN, Department of Biological and Chemical Engineering, Aarhus University, Aarhus, Denmark
    P3 - Nanobiomaterials - Nutlin-loaded ultrasound-activated piezoelectric nanovectors: Modulation of anti-angiogenic activityNanobiomaterialsOzlem SEN, Istituto Italiano di Tecnologia, Smart Bio-Interfaces, Viale Rinaldo Piaggio 34, 56025 Pontedera, Italy
    Attilio MARINO, Istituto Italiano di Tecnologia
    Carlotta PUCCI, Istituto Italiano di Tecnologia
    Gianni CIOFANI, Istituto Italiano di Tecnologia

    topicA-07 Nano-biomaterials
    person_pinOzlem SEN, Istituto Italiano di Tecnologia, Smart Bio-Interfaces, Viale Rinaldo Piaggio 34, 56025 Pontedera, Italy
    P5 - Nanobiomaterials - Hydrothermally and Plasma Treated Ti6Al4V for Antibacterial SurfacesNanobiomaterialsNiharika RAWAT, Laboratory of Physics, Faculty of Electrical Engineering, University of Ljubljana, Ljubljana, Slovenia
    Metka BENCINA, Department of Surface Engineering, Joz?ef Stefan Institute, Ljubljana, Slovenia
    Ita JUNKAR, Department of Surface Engineering, Joz?ef Stefan Institute, Ljubljana, Slovenia
    Aleš IGLIC, Laboratory of Physics, Faculty of Electrical Engineering, University of Ljubljana, Ljubljana, Slovenia

    topicA-07 Nano-biomaterials
    person_pinNiharika RAWAT, Laboratory of Physics, Faculty of Electrical Engineering, University of Ljubljana, Ljubljana, Slovenia
    P6 - Nanobiomaterials - Synthesis of Cerium Oxide Nanoparticles in Microfluidic ReactorsNanobiomaterialsKonstantinos TSACHOURIDIS, Department of Chemical Engineering, University of Manchester
    Antonios ANASTASIOU, Department of Chemical Engineering, University of Manchester

    topicA-07 Nano-biomaterials
    person_pinKonstantinos TSACHOURIDIS, Department of Chemical Engineering, University of Manchester
    P7 - Nanobiomaterials - Development of nanovectors for targeted delivery of p38 MAPK inhibitors to dendritic cellsNanobiomaterialsJinge YOU, University of Nottingham
    Andrew JACKSON, University of Nottingham
    Poulam PATEL, University of Nottingham
    Giuseppe MANTOVANI, University of Nottingham
    Cameron ALEXANDER, University of Nottingham

    topicA-07 Nano-biomaterials
    person_pinJinge YOU, University of Nottingham
    P8 - Nanobiomaterials - Synthesis and Characterization of Cerium Oxide Nanoparticles for Surface Coating of Titanium ImplantsNanobiomaterialsMaria-Eleni IOANNOU, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Georgia K POUROUTZIDOU, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece and School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Ioannis TSAMESIDIS, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Iason CHATZIMENTOR, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Eleni LIKOTRAFITI, Department of Food Science and Technology, International Hellenic University, 570 0154124 Thessaloniki, Greece
    Jonathan RHOADES, Department of Food Science and Technology, International Hellenic University, 570 0154124 Thessaloniki, Greece
    Eleana KONTONASAKI, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece

    topicA-07 Nano-biomaterials
    person_pinMaria-Eleni IOANNOU, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    P9 - Nanobiomaterials - Amphiphilic Nanogels for the Delivery of Hydrophobic CompoundsNanobiomaterialsClara LÓPEZ IGLESIAS, Universidade de Santiago de Compostela and Freie Universität Berlin
    Alexandra GRUBER, Freie Universität Berlin
    Ante MARKOVINA, Freie Universität Berlin
    Nithiya NIRMALANANTHAN-BUDAU, Bundesanstalt für Materialforschung und –prüfung (BAM)
    Ute RESCH-GENGER, Bundesanstalt für Materialforschung und –prüfung (BAM)
    Daniel KLINGER, Freie Universität Berlin

    topicA-07 Nano-biomaterials
    person_pinClara LÓPEZ IGLESIAS, Universidade de Santiago de Compostela and Freie Universität Berlin
    P10 - Nanobiomaterials - Dual-functional nanofibers for light neural stimulation and nerve growth factor releaseNanobiomaterialsJordi AMAGAT MOLAS, Department of Biological and Chemical Engineering, Aarhus University, Denmark, Sino-Danish College (SDC), University of Chinese Academy of Sciences, Beijing 101400, China.
    Natasja PORSKJÆR CHRISTENSEN, Department of Biological and Chemical Engineering, Aarhus University, Denmark.
    Yingchun SU, Department of Biological and Chemical Engineering, Aarhus University, Denmark, School of Electrical Engineering and Computer Science, KTH Royal Institute of Technology, Electrum 229, 16440, Kista, Sweden
    Alice LE FRIEC, Department of Biological and Chemical Engineering, Aarhus University, Denmark
    Menglin CHEN, Department of Biological and Chemical Engineering, Aarhus University, Denmark, Interdisciplinary Nanoscience Center, iNANO, Aarhus University, Denmark

    topicA-07 Nano-biomaterials
    person_pinJordi AMAGAT MOLAS, Department of Biological and Chemical Engineering, Aarhus University, Denmark, Sino-Danish College (SDC), University of Chinese Academy of Sciences, Beijing 101400, China.
    P11 - Nanobiomaterials - Targeting photothermal therapy to endometriotic cells overexpressing CD44NanobiomaterialsCristina VOLPINI, Molecular Medicine Department (DMM), Centre for Health Technologies (CHT), UdR INSTM, University of Pavia, Pavia, Italy; Medicina Clinica-Specialistica, UOR5 Laboratorio di Nanotecnologie, ICS Maugeri, IRCCS, 27100 Pavia, Italy; Interuniversity Center for the promotion of the 3Rs principles in teaching and research (Centro 3R), University of Pavia Unit, Italy
    Nora BLOISE, Molecular Medicine Department (DMM), Centre for Health Technologies (CHT), UdR INSTM, University of Pavia, Pavia, Italy; Medicina Clinica-Specialistica, UOR5 Laboratorio di Nanotecnologie, ICS Maugeri, IRCCS, 27100 Pavia, Italy; Interuniversity Center for the promotion of the 3Rs principles in teaching and research (Centro 3R), University of Pavia Unit, Italy
    Mattia DOMINONI, Department of Clinical, Surgical, Diagnostic and Paediatric Sciences, University of Pavia, Pavia, Italy
    Fabio BARRA, Academic Unit of Obstetrics and Gynecology, IRCCS Ospedale Policlinico San Martino, Genova, Italy;DINOGMI, University of Genova, Italy
    Valerio Gaetano VELLONE, Anatomia Patologica Universitaria, IRCCS Ospedale Policlinico San Martino, Genova; Dipartimento di Scienze Chirurgiche e Diagnostiche Integrate (DISC), Università di Genova
    Barbara GARDELLA, Department of Clinical, Surgical, Diagnostic and Paediatric Sciences, University of Pavia, Pavia, Italy; Department of Obstetrics and Gynecology, Fondazione IRCCS Policlinico San Matteo, Pavia, Italy
    Simone FERRERO, Academic Unit of Obstetrics and Gynecology, IRCCS Ospedale Policlinico San Martino, Genova, Italy; DINOGMI, University of Genova, Italy
    Livia VISAI, Molecular Medicine Department (DMM), Centre for Health Technologies (CHT), UdR INSTM, University of Pavia, Pavia, Italy; Medicina Clinica-Specialistica, UOR5 Laboratorio di Nanotecnologie, ICS Maugeri, IRCCS, 27100 Pavia, Italy; Interuniversity Center for the promotion of the 3Rs principles in teaching and research (Centro 3R), University of Pavia Unit, Italy

    topicA-07 Nano-biomaterials
    person_pinCristina VOLPINI, Molecular Medicine Department (DMM), Centre for Health Technologies (CHT), UdR INSTM, University of Pavia, Pavia, Italy; Medicina Clinica-Specialistica, UOR5 Laboratorio di Nanotecnologie, ICS Maugeri, IRCCS, 27100 Pavia, Italy; Interuniversity Center for the promotion of the 3Rs principles in teaching and research (Centro 3R), University of Pavia Unit, Italy
    P12 - Nanobiomaterials - Cell-penetrating peptide-modified nanoparticles for enhanced adipocyte uptakeNanobiomaterialsSuim CHOI, Hanyang University
    Yurim BAE, Hanyang University
    Guenyong LEE, Hanyang University

    topicA-07 Nano-biomaterials
    person_pinYurim BAE, Hanyang University
    P13 - Nanobiomaterials - Surface-functionalized polymer nanoparticles for localized fat reductionNanobiomaterialsIn Young LEE, Hanyang University
    Yu Rim BAE, Hanyang University
    Eun Ju JEONG, Supernova bio
    Kuen Yong LEE, Hanyang University

    topicA-07 Nano-biomaterials
    person_pinIn Young LEE, Hanyang University
    P14 - Nanobiomaterials - Carbon dioxide gas-generating PEG-based micelles for adipocytolysisNanobiomaterialsChunggoo KIM, Hanyang University
    Minju KIM, Hanyang University
    Kuen-Yong LEE, Hanyang University

    topicA-07 Nano-biomaterials
    person_pinMinju KIM, Hanyang University
    P15 - Nanobiomaterials - New sensitive sericin nanocarriers designed by living polymerization for cancer managementNanobiomaterialsIonut-Cristian RADU, University Politehnica of Bucharest
    Catalin ZAHARIA, University Politehnica of Bucharest
    Madalina NECOLAU, University Politehnica of Bucharest
    Eugeniu VASILE, University Politehnica of Bucharest
    Andreea VADUREANU, University Politehnica of Bucharest

    topicA-07 Nano-biomaterials
    person_pinIonut-Cristian RADU, University Politehnica of Bucharest
    P16 - Nanobiomaterials - Wound dressing based on nanofibers from hyaluronic acid and hyaluronic acid derivativeNanobiomaterialsStepan VONDROVIC, Contipro a.s.,
    Adela KOTZIANOVA, Contipro a.s.
    Petr SULC, Contipro a.s.
    Dagmar COZIKOVA, Contipro a.s.
    Jaromir KULHANEK, Contipro a.s.
    Vojtech PAVLIK, Contipro a.s.
    Tomas PRAT, Contipro a.s.
    Hana VAGNEROVA, Contipro a.s.
    Vendula JONES, Contipro a.s.
    Ondrej ZIDEK, Contipro a.s.

    topicA-07 Nano-biomaterials
    person_pinStepan VONDROVIC, Contipro a.s.,
    P17 - Nanobiomaterials - Modular Colloidal Gels for Focalized Delivery of Immunomodulatory TherapeuticsNanobiomaterialsLeandro GONÇALVES, CICECO - Aveiro Institute of Materials University of Aveiro
    Pedro LAVRADOR, CICECO - Aveiro Institute of Materials University of Aveiro
    Vítor GASPAR, CICECO - Aveiro Institute of Materials University of Aveiro
    João MANO, CICECO - Aveiro Institute of Materials University of Aveiro

    topicA-07 Nano-biomaterials
    person_pinVítor GASPAR, CICECO - Aveiro Institute of Materials University of Aveiro
    P22 - Nanobiomaterials - Electrospun Silica Nanofibres as Multifunctional Substrate for Regenerative Medicine and Drug Delivery NanobiomaterialsMiroslava RYSOVÁ, Technical University of Liberec
    Hana TOMÁNKOVÁ, Technical University of Liberec
    Markéta SCHAABOVÁ, Technical University of Liberec
    Šárka HAUZEROVÁ, Technical University of Liberec
    Pavel KEJZLAR, Technical University of Liberec
    Alena ŠEVCU, Technical University of Liberec

    topicA-07 Nano-biomaterials
    person_pinMiroslava RYSOVÁ, Technical University of Liberec
    P26 - Nanobiomaterials - DNA Modified MSN Films as Versatile Biointerfaces to Study Stem Cell Adhesion ProcessesNanobiomaterialsxingzhen ZHANG, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht, the Netherlands

    topicA-07 Nano-biomaterials
    person_pinxingzhen ZHANG, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht, the Netherlands
    P27 - Nanobiomaterials - Black Phosphorus-based 2D material with selective effects on Healthy and Cancer cell behaviorNanobiomaterialsInes FASOLINO, Institute of Polymers, Composites and Biomaterials – National Research Council (IPCB-CNR) Mostra d’Oltremare pad.20 - Viale J.F. Kennedy 54, 80125 Naples, Italy
    Alessandra SORIENTE, Institute of Polymers, Composites and Biomaterials – National Research Council (IPCB-CNR) Mostra d’Oltremare pad.20 - Viale J.F. Kennedy 54, 80125 Naples, Italy
    Maria CAPORALI, Institute of Chemistry of Organometallic Compounds – National Research Council (ICCOM-CNR), via Madonna del Piano 10, 50019 Sesto Fiorentino, Italy
    Manuel SERRANO-RUIZ, Institute of Chemistry of Organometallic Compounds – National Research Council (ICCOM-CNR), via Madonna del Piano 10, 50019 Sesto Fiorentino, Italy.
    Maurizio PERUZZINI, Institute of Chemistry of Organometallic Compounds – National Research Council (ICCOM-CNR), via Madonna del Piano 10, 50019 Sesto Fiorentino, Italy
    Luigi AMBROSIO, Institute of Polymers, Composites and Biomaterials – National Research Council (IPCB-CNR) Mostra d’Oltremare pad.20 - Viale J.F. Kennedy 54, 80125 Naples, Italy
    Maria Grazia RAUCCI, Institute of Polymers, Composites and Biomaterials – National Research Council (IPCB-CNR) Mostra d’Oltremare pad.20 - Viale J.F. Kennedy 54, 80125 Naples, Italy

    topicA-07 Nano-biomaterials
    person_pinInes FASOLINO, Institute of Polymers, Composites and Biomaterials – National Research Council (IPCB-CNR) Mostra d’Oltremare pad.20 - Viale J.F. Kennedy 54, 80125 Naples, Italy
    P29 - Nanobiomaterials - Fabrication of PLGA nanoparticles by droplet microfluidics for the sustained release in tumour microenvironmentNanobiomaterialsXue BAI, University of Manchester
    Sam BUTTERWORTH, University of Manchester
    Annalisa TIRELLA, University of Trento & University of Manchester

    topicA-07 Nano-biomaterials
    person_pinXue BAI, University of Manchester
    P30 - Nanobiomaterials - Investigations on the Influence of the PEG Chain Length on the Properties of Magnetic Nanoporous Silica NanoparticlesNanobiomaterialsTimo HERRMANN, Institute for Inorganic Chemistry, Leibniz University Hannover
    Janin REIFENRATH, Clinic for Orthopedic Surgery, Hannover Medical School
    Jessica MEIßNER, Institute for Pharmacology, Toxicology and Pharmacy, University of Veterinary Medicine Hannover, Foundation
    Peter BEHRENS, Institute for Inorganic Chemistry, Leibniz University Hannover

    topicA-07 Nano-biomaterials
    person_pinTimo HERRMANN, Institute for Inorganic Chemistry, Leibniz University Hannover
    P32 - Nanobiomaterials - Synthesis and morphological & structural characterization of metal oxides and their behavior in biological mediumNanobiomaterialsZsejke-Réka TÓTH, Nanostructured Materials and Bio-Nano-Interfaces Center, Interdisciplinary Research Institute on Bio-Nano-Sciences, Babes-Bolyai University, Cluj-Napoca, Romania
    Lenuta Nastasia RAZVANTA, Faculty of Chemistry and Chemical Engineering, Babes-Bolyai University, Cluj-Napoca, Romania
    Alexandra FERARU, Nanostructured Materials and Bio-Nano-Interfaces Center, Interdisciplinary Research Institute on Bio-Nano-Sciences, Babes-Bolyai University, Cluj-Napoca, Romania; Doctoral School of Physics, Faculty of Physics, Babes-Bolyai University, Cluj-Napoca, Romania
    Emilia LICARETE, Nanostructured Materials and Bio-Nano-Interfaces Center, Interdisciplinary Research Institute on Bio-Nano-Sciences, Babes-Bolyai University, Cluj-Napoca, Romania
    Lucian BAIA, Nanostructured Materials and Bio-Nano-Interfaces Center, Interdisciplinary Research Institute on Bio-Nano-Sciences, Babes-Bolyai University, Cluj-Napoca, Romania; Faculty of Physics, Babes-Bolyai University, Cluj-Napoca, Romania
    Klára MAGYARI, Nanostructured Materials and Bio-Nano-Interfaces Center, Interdisciplinary Research Institute on Bio-Nano-Sciences, Babes-Bolyai University, Cluj-Napoca, Romania; Department of Applied and Environmental Chemistry, Faculty of Science and Informatics, University of Szeged, Szeged, Hungary

    topicA-07 Nano-biomaterials
    person_pinZsejke-Réka TÓTH, Nanostructured Materials and Bio-Nano-Interfaces Center, Interdisciplinary Research Institute on Bio-Nano-Sciences, Babes-Bolyai University, Cluj-Napoca, Romania
    P33 - Nanobiomaterials - Intranasal delivery of mixed Nano-Micelles for Enhanced Glioblastoma Targeting Gene TherapyNanobiomaterialsYoungki LEE, Department of Bioengineering, College of Engineering, Hanyang University, Seoul 04763, Korea
    Minhyung LEE, Department of Bioengineering, College of Engineering, Hanyang University, Seoul 04763, Korea
    Junkyu HA, Department of Bioengineering, College of Engineering, Hanyang University, Seoul 04763, Korea
    Minkyung KIM, Department of Bioengineering, College of Engineering, Hanyang University, Seoul 04763, Korea

    topicA-07 Nano-biomaterials
    person_pinYoungki LEE, Department of Bioengineering, College of Engineering, Hanyang University, Seoul 04763, Korea
    P34 - Nanobiomaterials - Green synthesis of AgNP using snail slimeNanobiomaterialsMaria Francesca DI FILIPPO, Department of Chemistry, University of Bologna, Bologna, Italy
    Valentina DI MATTEO, Department of Chemistry, University of Bologna, Bologna, Italy
    Silvia PANZAVOLTA, Department of Chemistry, University of Bologna, Bologna, Italy

    topicA-07 Nano-biomaterials
    person_pinMaria Francesca DI FILIPPO, Department of Chemistry, University of Bologna, Bologna, Italy
    P35 - Nanobiomaterials - Piezoelectric nylon-11 nanoparticles as innovative anti-cancer nanovectorsNanobiomaterialsOzlem SEN, Istituto Italiano di Tecnologia
    Melis EMANET CIOFANI, Istituto Italiano di Tecnologia
    Gianni CIOFANI, Istituto Italiano di Tecnologia

    topicA-07 Nano-biomaterials
    person_pinOzlem SEN, Istituto Italiano di Tecnologia
    P36 - Nanobiomaterials - Tannic acid – Iron-based Nanocomplexes: a Natural Derivative to Fight Oxidative StressNanobiomaterialsCarlotta PUCCI, Italian Institute of Technology
    Gianni CIOFANI, Italian Institute of Technology

    topicA-07 Nano-biomaterials
    person_pinCarlotta PUCCI, Italian Institute of Technology
    P37 - Nanobiomaterials - Synthesis and characterization of ZnO nanoparticles carrying nitric oxide donor for potential biomedical applicationsNanobiomaterialsAmedea BAROZZI SEABRA, Federal University of ABC (UFABC)
    Isabella MARTINS LOURENÇO, Federal University of ABC (UFABC)
    Joana CLAUDIO PIERETTI, Federal University of ABC (UFABC)
    Bruna MOREIRA FREIRE , Federal University of ABC (UFABC)
    Bruno LEMOS BATISTA, Federal University of ABC (UFABC)
    Gerson NAKAZATO, Londrina State University
    Marcelly CHUE GONÇALVES, Londrina State University

    topicA-07 Nano-biomaterials
    person_pinAmedea BAROZZI SEABRA, Federal University of ABC (UFABC)
    P38 - Nanobiomaterials - Sumac (Rhus coriaria) Extract Loaded Polymeric Nanosheets for Controlled Transdermal Drug DeliveryNanobiomaterialsMelis EMANET, Fondazione Istituto Italiano di Tecnologia
    Mayu OKUDA, Waseda University
    Ozlem SEN, Fondazione Istituto Italiano di Tecnologia
    Shinji TAKEOKA, Waseda University
    Gianni CIOFANI, Fondazione Istituto Italiano di Tecnologia

    topicA-07 Nano-biomaterials
    person_pinMelis EMANET, Fondazione Istituto Italiano di Tecnologia
    P41 - Nanobiomaterials - Gold@Silver-Gold nanorattles as potential catalysts for biosensingNanobiomaterialsFlavia GONTIJO DA SILVA, University of Helsinki
    Pedro CAMARGO, University of Helsinki

    topicA-07 Nano-biomaterials
    person_pinFlavia GONTIJO DA SILVA, University of Helsinki
    P1 - Polymers/Supramolecular biomaterials - Dual-crosslinked degradable elastomer with self-healing propertiesPolymers/Supramolecular biomaterialsMathilde GROSJEAN, Department of Polymers for Health and Biomaterials, IBMM, University of Montpellier, Montpellier, France
    Louis GANGOLPHE, Polymers for Health and Biomaterials - IBMM - Univ Montpellier, LRP - Grenoble INP - Univ Grenoble Alpes
    Frédéric BOSSARD, LRP - Grenoble INP - Univ Grenoble Alpes
    Xavier GARRIC, Polymers for Health and Biomaterials - IBMM - Univ Montpellier
    Benjamin NOTTELET, Polymers for Health and Biomaterials - IBMM - Univ Montpellier

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinMathilde GROSJEAN, Department of Polymers for Health and Biomaterials, IBMM, University of Montpellier, Montpellier, France
    P2 - Polymers/Supramolecular biomaterials - Supramolecular network of poly(?-caprolactone) and poly(ethylene oxide) biomaterials with efficient thermo- and moisture-sensitive shape-memory.Polymers/Supramolecular biomaterialsJeremie CAPRASSE, Uliege
    Jean-Michel THOMASSIN, Uliege
    Raphaël RIVA, Uliege
    Christine JÉRÔME, Uliege

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinJeremie CAPRASSE, Uliege
    P3 - Polymers/Supramolecular biomaterials - The physicochemical and antibacterial properties of chitosan-based materials modified with phenolic acids irradiated by UVC lightPolymers/Supramolecular biomaterialsKaczmarek-Szczepa?ska BEATA, Faculty of Chemistry, Department of Biomaterials and Cosmetics Chemistry, Nicolaus Copernicus University in Torun, Poland
    Marcin WEKWEJT, Department of Biomaterials Technology, Faculty of Mechanical Engineering and Ship Technology, Gda?sk University of Technology, Gda?sk, Poland
    Lidia ZASADA, Faculty of Chemistry, Department of Biomaterials and Cosmetics Chemistry, Nicolaus Copernicus University in Torun, Poland
    Anna PA?UBICKA, Specialist Hospital in Ko?cierzyna, Department of Laboratory Diagnostics and Microbiology with Blood Bank, Ko?cierzyna, Poland
    Ewa OLEWNIK-KRUSZKOWSKA, Physical Chemistry and Physicochemistry of Polymers, Faculty of Chemistry, Nicolaus Copernicus Univer-sity in Torun, Poland

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinKaczmarek-Szczepa?ska BEATA, Faculty of Chemistry, Department of Biomaterials and Cosmetics Chemistry, Nicolaus Copernicus University in Torun, Poland
    P4 - Polymers/Supramolecular biomaterials - Chitosan-based films enriched by caffeic acid with poly(ethylene glycol)Polymers/Supramolecular biomaterialsKaczmarek-Szczepa?ska BEATA, Nicolaus Copernicus University in Toru?, Faculty of Chemistry, Department of Biomaterials and Cosmetics Chemistry
    Adrianna SOSIK, Nicolaus Copernicus University in Toru?, Faculty of Chemistry, Department of Biomaterials and Cosmetics Chemistry
    Anna MA?KOWSKA, Nicolaus Copernicus University in Toru?, Faculty of Chemistry, Department of Biomaterials and Cosmetics Chemistry
    Lidia ZASADA, Nicolaus Copernicus University in Toru?, Faculty of Chemistry, Department of Biomaterials and Cosmetics Chemistry
    Marta MICHALSKA-SIONKOWSKA, Nicolaus Copernicus University in Toru?, Faculty of Biological and Veterinary Sciences, Department of Environmental Microbiology and Biotechnology

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinKaczmarek-Szczepa?ska BEATA, Nicolaus Copernicus University in Toru?, Faculty of Chemistry, Department of Biomaterials and Cosmetics Chemistry
    P5 - Polymers/Supramolecular biomaterials - Supramolecular polymers for the design of modular multivalent antibacterial vaccinesPolymers/Supramolecular biomaterialsYuqing WANG, Department of Chemistry, Johannes Gutenberg-University Mainz, Germany

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinYuqing WANG, Department of Chemistry, Johannes Gutenberg-University Mainz, Germany
    P6 - Polymers/Supramolecular biomaterials - Validation of a New Surgical Management Strategy for Human Pubic Ligament LesionsPolymers/Supramolecular biomaterialsRobert BEYA, Anatomy Biomechanics Simulations Lab / Poitiers University, France
    Cyril BREQUE, Anatomy Biomechanics Simulations Lab / Poitiers University, France
    Jérôme DANION, Anatomy Biomechanics Simulations Lab / Poitiers University, France
    Elodie CHÂTEAU, Anatomy Biomechanics Simulations Lab / Poitiers University, France
    Jean-Pierre FAURE, Anatomy Biomechanics Simulations Lab / Poitiers University, France
    Tanguy VENDEUVRE, Anatomy Biomechanics Simulations Lab / Poitiers University, France
    Denis ORIOT, Anatomy Biomechanics Simulations Lab / Poitiers University, France
    Jean-Pierre RICHER, Anatomy Biomechanics Simulations Lab / Poitiers University, France
    Guillaume HERPE, DACTIM-MIS Radiology, Research Institute, Poitiers, University, France
    Rémy GUILLEVIN, DACTIM-MIS Radiology, Research Institute, Poitiers, University, France
    Thierry HAUET, INSERM U1082-IRTOMIT, Resarch Instute, Poitiers University, France

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinRobert BEYA, Anatomy Biomechanics Simulations Lab / Poitiers University, France
    P8 - Polymers/Supramolecular biomaterials - Design of Nitrile-functionalised Poly(2-oxazoline)s as Novel and Versatile Platform for Drug Delivery SystemPolymers/Supramolecular biomaterialsZihnil Adha Islamy MAZRAD , Monash University
    Baptiste SCHELLE, Monash University
    Joseph A. NICOLAZZO, Monash University
    Meike N. LEISKE, Monash University
    Kristian KEMPE, Monash University

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinZihnil Adha Islamy MAZRAD , Monash University
    P11 - Polymers/Supramolecular biomaterials - Preparing biocompatible oligomersPolymers/Supramolecular biomaterialsCordula HEGE, University off Nottingham
    Amy STIMPSON, University of Nottingham
    Helena HENKE, University of Nottingham
    Adam DUNDAS, University of Nottingham
    Chris FOX, Acess to Advanced Health Institute
    Derek IRVINE, University of Nottingham

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinCordula HEGE, University off Nottingham
    P12 - Polymers/Supramolecular biomaterials - Fully peptide-based nanomaterials by Aqueous Ring-Opening Polymerization Induced Self-Assembly (ROPISA) of N-Carboxyanhydrides Polymers/Supramolecular biomaterialsHannah BEAUSEROY, Laboratoire de Chimie des Polymères Organiques UMR CNRS 5629, Univ. Bordeaux, Bordeaux INP, F-33600 Pessac, France.
    Chloé GRAZON, Laboratoire de Chimie des Polymères Organiques UMR CNRS 5629, Univ. Bordeaux, Bordeaux INP, F-33600 Pessac, France.
    Ségolène ANTOINE, Laboratoire de Chimie des Polymères Organiques UMR CNRS 5629, Univ. Bordeaux, Bordeaux INP, F-33600 Pessac, France.
    Elisabeth GARANGER, Laboratoire de Chimie des Polymères Organiques UMR CNRS 5629, Univ. Bordeaux, Bordeaux INP, F-33600 Pessac, France.
    Sébastien LECOMMANDOUX, Laboratoire de Chimie des Polymères Organiques UMR CNRS 5629, Univ. Bordeaux, Bordeaux INP, F-33600 Pessac, France.
    Colin BONDUELLE, Laboratoire de Chimie des Polymères Organiques UMR CNRS 5629, Univ. Bordeaux, Bordeaux INP, F-33600 Pessac, France.

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinHannah BEAUSEROY, Laboratoire de Chimie des Polymères Organiques UMR CNRS 5629, Univ. Bordeaux, Bordeaux INP, F-33600 Pessac, France.
    P13 - Polymers/Supramolecular biomaterials - Conducting Films Based on BiopolymersPolymers/Supramolecular biomaterialsZdenka CAPAKOVA, Centre of Polymer Systems, Tomas Bata University in Zlin, Zlin, Czechia
    Daniela JASENSKA, Centre of Polymer Systems, Tomas Bata University in Zlin, Zlin, Czechia
    Vera KASPARKOVA, Centre of Polymer Systems, Tomas Bata University in Zlin, Zlin, Czechia
    Jiri PACHERNIK, Faculty of Science, Masaryk University, Brno, Czechia

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinZdenka CAPAKOVA, Centre of Polymer Systems, Tomas Bata University in Zlin, Zlin, Czechia
    P14 - Polymers/Supramolecular biomaterials - Woven PLA-PLA and PLA-PCL composites for biomedical applicationsPolymers/Supramolecular biomaterialsCarolina PEREIRA LOBATO COSTA, Imdea Materials, Universidad Carlos III de Madrid, Madrid, Spain
    Guillermo DOMÍNGUEZ, IMDEA Materials,Department of Materials Science, Polytechnic University of Madrid, Madrid, Spain
    Jimena DE LA VEGA, IMDEA Materials, Madrid, Spain
    Cristina PASCUAL-GONZÁLEZ, IMDEA Materials, Madrid, Spain
    Mónica ECHEVERRY RENDÓN, IMDEA Materials, Madrid, Spain
    Carlos GONZÁLEZ, IMDEA Materials, Department of Materials Science, Polytechnic University of Madrid, Madrid, Spain
    Javier LLORCA, IMDEA Materials, Department of Materials Science, Polytechnic University of Madrid, Madrid, Spain

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinCarolina PEREIRA LOBATO COSTA, Imdea Materials, Universidad Carlos III de Madrid, Madrid, Spain
    P15 - Polymers/Supramolecular biomaterials - Poly(ester urethane)s with Tunable Properties for the Additive Manufacturing of Tissue Engineering ScaffoldsPolymers/Supramolecular biomaterialsArianna GRIVET-BRANCOT, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy; Department of Surgical Sciences, Università di Torino, Torino, Italy
    Monica BOFFITO, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy; Istituto per i Processi Chimico-Fisici, Consiglio Nazionale delle Ricerche, Pisa, Italy
    Leonardo MORTATI, INRIM – Istituto Nazionale di Ricerca Metrologica, Torino, Italy
    Carla DIVIETO, INRIM – Istituto Nazionale di Ricerca Metrologica, Torino, Italy
    Simona BRONCO, Istituto per i Processi Chimico-Fisici, Consiglio Nazionale delle Ricerche, Pisa, Italy
    Gianluca CIARDELLI, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy; Istituto per i Processi Chimico-Fisici, Consiglio Nazionale delle Ricerche, Pisa, Italy

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinArianna GRIVET-BRANCOT, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy; Department of Surgical Sciences, Università di Torino, Torino, Italy
    P16 - Polymers/Supramolecular biomaterials - Films of Covalently Crosslinked Hyaluronan as Resorbable ImplantsPolymers/Supramolecular biomaterialsJirí MRÁZEK, Contipro a.s.
    Jana BAŽANTOVÁ, Contipro a.s.
    Kristina NEŠPOROVÁ, Contipro a.s.
    Eva KRIVÁKOVÁ, Institute of Biophysics, Academy of Sciences of the Czech Republic
    Martina BAJEROVÁ, Institute of Biophysics, Academy of Sciences of the Czech Republic
    Lukáš KUBALA, Institute of Biophysics, Academy of Sciences of the Czech Republic
    Josef CHMELAR, Contipro a.s.

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinJirí MRÁZEK, Contipro a.s.
    P18 - Polymers/Supramolecular biomaterials - One-step generation of alginate-based hydrogel foams using CO2 simultaneously for foaming and gelationPolymers/Supramolecular biomaterialsImene BEN DJEMAA, Institut Charles Sadron, University of Strasbourg, Strasbourg, France and Urgo Research Innovation and Development, Chenôve Cedex, France
    Stéphane AUGUSTE, Urgo Research Innovation and Development, Chenôve Cedex, France
    Leandro JACOMINE, Institut Charles Sadron, University of Strasbourg, Strasbourg, France
    Malgorzata TARNOWSKA, Urgo Research Innovation and Development, Chenôve Cedex, France
    Wiebke DRENCKHAN, Institut Charles Sadron, University of Strasbourg, Strasbourg, France
    Sébastien ANDRIEUX, Institut Charles Sadron, University of Strasbourg, Strasbourg, France

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinImene BEN DJEMAA, Institut Charles Sadron, University of Strasbourg, Strasbourg, France and Urgo Research Innovation and Development, Chenôve Cedex, France
    P19 - Polymers/Supramolecular biomaterials - Protein-based Nanoformulations Loaded with Active Principles For The Management of Brain TumorsPolymers/Supramolecular biomaterialsCatalin ZAHARIA, University Politehnica of Bucharest
    Ionut-Cristian RADU, University Politehnica of Bucharest
    Mircea TEODORESCU, University Politehnica of Bucharest
    Bianca GALATEANU, University of Bucharest
    Madalina NECOLAU, University Politehnica of Bucharest
    Ariana HUDITA, University of Bucharest
    Eugenia TANASA, University Politehnica of Bucharest

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinCatalin ZAHARIA, University Politehnica of Bucharest
    P20 - Polymers/Supramolecular biomaterials - Towards Thymidine-based Low Molecular Weight Oleogelators (LMWO) biomaterialsPolymers/Supramolecular biomaterialsArthur KLUFTS-EDEL, ChemBioPharm group INSERM U1212 – Université de Bordeaux CNRS UMR 5320
    Bérangère DESSANE, ChemBioPharm group INSERM U1212 – Université de Bordeaux CNRS UMR 5320
    Fanny CAFFIN, Département Toxicologie et Risques Chimiques, Institut de Recherche Biomédicale des Armées (IRBA)
    Philippe BARTHÉLÉMY, ChemBioPharm group INSERM U1212 – Université de Bordeaux CNRS UMR 5320
    Christophe PIÉRARD, Département Toxicologie et Risques Chimiques, Institut de Recherche Biomédicale des Armées (IRBA)
    Sylvie CRAUSTE-MANCIET, ChemBioPharm group INSERM U1212 – Université de Bordeaux CNRS UMR 5320
    Valérie DESVERGNES, ChemBioPharm group INSERM U1212 – Université de Bordeaux CNRS UMR 5320

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinArthur KLUFTS-EDEL, ChemBioPharm group INSERM U1212 – Université de Bordeaux CNRS UMR 5320
    P21 - Polymers/Supramolecular biomaterials - 3D Printable Supramolecular Self-Assembling Beta-Sheet Peptide and Tyramine-Modified Hyaluronan Hydrogels with Immunomodulatory PropertiesPolymers/Supramolecular biomaterialsJacek WYCHOWANIEC, AO Research Institute Davos, Clavadelerstrasse 8, 7270, Davos, Switzerland
    Charlotte J.C. EDWARDS-GAYLE, Diamond Light Source, Harwell Science and Innovation Campus, Fermi Avenue, Didcot, OX110DE, United Kingdom
    Ezgi Irem BEKTAS, AO Research Institute Davos, Clavadelerstrasse 8, 7270, Davos, Switzerland
    David EGLIN, Mines Saint-Étienne, Univ Lyon, Univ Jean Monnet, INSERM, U1059 Sainbiose, Saint-Étienne, France
    Matteo D'ESTE, AO Research Institute Davos, Clavadelerstrasse 8, 7270, Davos, Switzerland

    topicA-09 Polymers/Supramolecular biomaterials
    person_pinJacek WYCHOWANIEC, AO Research Institute Davos, Clavadelerstrasse 8, 7270, Davos, Switzerland
    P1 - Stimuli-responsive - Electrospun PNIPAAm-based fibers for pH- and thermo-responsive localized drug releaseStimuli-responsiveAdriana GONÇALVES, CENIMAT | i3N, Department of Materials Science, NOVA SST, Caparica, Portugal
    Miguel CASTILHO, Department of Biomedical Engineering, Technical University of Eindhoven/Department of Orthopedics, University Medical Center Utrecht
    João Paulo BORGES, CENIMAT | i3N, Department of Materials Science
    Paula SOARES, CENIMAT | i3N, Department of Materials Science

    topicA-11 Stimuli-responsive
    person_pinAdriana GONÇALVES, CENIMAT | i3N, Department of Materials Science, NOVA SST, Caparica, Portugal
    P3 - Stimuli-responsive - Nano-doped piezoelectric hydrogels and low-intensity pulsed ultrasound boost the chondrogenic differentiation of human adipose tissue-derived stromal cellsStimuli-responsiveLeonardo RICOTTI, The BioRobotics Institute, Scuola Superiore Sant’Anna, Pisa, Italy - Department of Excellence in Robotics & AI, Scuola Superiore Sant’Anna, Pisa, Italy
    Diego TRUCCO, The BioRobotics Institute, Scuola Superiore Sant’Anna, Pisa, Italy - Department of Excellence in Robotics & AI, Scuola Superiore Sant’Anna, Pisa, Italy - SC Laboratorio di Immunoreumatologia e Rigenerazione Tissutale, Istituto Ortopedico Rizzoli, Bologna,Italy
    Lorenzo VANNOZZI, The BioRobotics Institute, Scuola Superiore Sant’Anna, Pisa, Italy - Department of Excellence in Robotics & AI, Scuola Superiore Sant’Anna, Pisa, Italy
    Andrea CAFARELLI, The BioRobotics Institute, Scuola Superiore Sant’Anna, Pisa, Italy - Department of Excellence in Robotics & AI, Scuola Superiore Sant’Anna, Pisa, Italy
    Cristina MANFERDINI, SC Laboratorio di Immunoreumatologia e Rigenerazione Tissutale, Istituto Ortopedico Rizzoli, Bologna,Italy
    Elena GABUSI, SC Laboratorio di Immunoreumatologia e Rigenerazione Tissutale, Istituto Ortopedico Rizzoli, Bologna,Italy
    Paolo DOLZANI, SC Laboratorio di Immunoreumatologia e Rigenerazione Tissutale, Istituto Ortopedico Rizzoli, Bologna,Italy
    Yasmin SALEH, SC Laboratorio di Immunoreumatologia e Rigenerazione Tissutale, Istituto Ortopedico Rizzoli, Bologna,Italy
    Marta COLUMBARO, Direzione Scientifica, IRCCS Istituto Ortopedico Rizzoli, Bologna,Italy
    Gina LISIGNOLI, SC Laboratorio di Immunoreumatologia e Rigenerazione Tissutale, Istituto Ortopedico Rizzoli, Bologna,Italy

    topicA-11 Stimuli-responsive
    person_pinLorenzo VANNOZZI, The BioRobotics Institute, Scuola Superiore Sant’Anna, Pisa, Italy - Department of Excellence in Robotics & AI, Scuola Superiore Sant’Anna, Pisa, Italy
    P4 - Stimuli-responsive - Biocompatible DLP resins with programmable shape memoryStimuli-responsiveAna Agustina ALDANA, Department of Complex Tissue Regeneration, MERLN Institute for Technology Inspired Regenerative Medicine, Maastricht University
    Tobias KUHNT, Department of Complex Tissue Regeneration, MERLN Institute for Technology Inspired Regenerative Medicine, Maastricht University
    Ramiro MARROQUIN-GARCIA, Department of Complex Tissue Regeneration, MERLN Institute for Technology Inspired Regenerative Medicine, Maastricht University
    Lorenzo MORONI, Department of Complex Tissue Regeneration, MERLN Institute for Technology Inspired Regenerative Medicine, Maastricht University
    Matthew BAKER, Department of Complex Tissue Regeneration, MERLN Institute for Technology Inspired Regenerative Medicine, Maastricht University

    topicA-11 Stimuli-responsive
    person_pinAna Agustina ALDANA, Department of Complex Tissue Regeneration, MERLN Institute for Technology Inspired Regenerative Medicine, Maastricht University
    P7 - Stimuli-responsive - Firefly-Bioinspired Hydrogels with Redox-responsiveness as Cell-encapsulating Injectable MatricesStimuli-responsiveMinye JIN, INM – Leibniz Institute for New Materials. Campus D2-2, 66123, Saarbrücken, Germany; Chemistry Department, Saarland University. 66123, Saarbrücken, Germany; University of Twente. Drienerlolaan 5, 7522 NB, Enschede, The Netherlands.
    Alisa GLÄSER, INM-Leibniz Institute for New Materials
    Supun MOHOTTI, INM-Leibniz Institute for New Materials
    Julieta PAEZ, University of Twente

    topicA-11 Stimuli-responsive
    person_pinMinye JIN, INM – Leibniz Institute for New Materials. Campus D2-2, 66123, Saarbrücken, Germany; Chemistry Department, Saarland University. 66123, Saarbrücken, Germany; University of Twente. Drienerlolaan 5, 7522 NB, Enschede, The Netherlands.
    P8 - Stimuli-responsive - Stimuli-responsive face mask-based on electrospun nanofibersStimuli-responsiveMohammad Ali HAGHIGHAT BAYAN, Institute of Fundamental Technological Research, Polish Academy of Sciences, Warsaw, Poland
    Chiara RINOLDI, Institute of Fundamental Technological Research, Polish Academy of Sciences, Warsaw, Poland
    Pawe? NAKIELSKI, Institute of Fundamental Technological Research, Polish Academy of Sciences, Warsaw, Poland
    Filippo PIERINI, Institute of Fundamental Technological Research, Polish Academy of Sciences, Warsaw, Poland

    topicA-11 Stimuli-responsive
    person_pinMohammad Ali HAGHIGHAT BAYAN, Institute of Fundamental Technological Research, Polish Academy of Sciences, Warsaw, Poland
    P9 - Stimuli-responsive - Study of Dual Cross-linking of Alginate Based Hydrogels for Biomedical ApplicationStimuli-responsiveMichel HABIB, ICGM - UMR 5253
    Steve BERTHALON, ICGM - UMR 5253
    Audrey TOURRETTE, CIRIMAt - UMR 5085
    Tahmer SHARKAWI, ICGM - UMR 5253
    Sebastien BLANQUER, ICGM - UMR 5253

    topicA-11 Stimuli-responsive
    person_pinMichel HABIB, ICGM - UMR 5253
    P10 - Stimuli-responsive - Black phosphorus-incorporated hybrid nanomaterials as a theragenerative platform for bone tissue engineeringStimuli-responsiveAshkan BIGHAM, Institute of Polymers, Composites and Biomaterials, National Research Council (IPCB-CNR), Naples, Italy
    Ines FASOLINO, Institute of Polymers, Composites and Biomaterials, National Research Council (IPCB-CNR), Naples, Italy
    Carmen VALENTE, Institute of Endocrinology and Experimental Oncology “G. Salvatore” -National Research Council (IEOS-CNR), Naples - Italy
    Gabriele TURACCHIO, Institute of Endocrinology and Experimental Oncology “G. Salvatore” -National Research Council (IEOS-CNR), Naples - Italy
    Maria CAPORALI , Institute of Chemistry of Organometallic Compounds -National Research Council (ICCOM-CNR), Sesto Fiorentino - Italy
    Luigi AMBROSIO , Institute of Polymers, Composites and Biomaterials, National Research Council (IPCB-CNR), Naples, Italy
    Maria Grazia RAUCCI , Institute of Polymers, Composites and Biomaterials, National Research Council (IPCB-CNR), Naples, Italy

    topicA-11 Stimuli-responsive
    person_pinAshkan BIGHAM, Institute of Polymers, Composites and Biomaterials, National Research Council (IPCB-CNR), Naples, Italy
    P12 - Stimuli-responsive - Methylcellulose-based responsive hydrogels for controlled delivery of silver nanoparticlesStimuli-responsiveLorenzo BONETTI, Dept. of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, 20131, Milan (Italy)
    Andrea FIORATI, Dept. of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, 20131, Milan (Italy)
    Agnese D'AGOSTINO, Dept. of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, 20131, Milan (Italy)
    Carlo Maria PELACANI, Dept. of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, 20131, Milan (Italy)
    Roberto CHIESA, Dept. of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, 20131, Milan (Italy)
    Silvia FARÈ, Dept. of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, 20131, Milan (Italy)
    Luigi DE NARDO, Dept. of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, 20131, Milan (Italy)

    topicA-11 Stimuli-responsive
    person_pinLorenzo BONETTI, Dept. of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, 20131, Milan (Italy)
    P14 - Stimuli-responsive - 3D-printing of Smart Hybrid Multifunctional Bioinks and their Application in Disease ModellingStimuli-responsiveUxue AIZARNA-LOPETEGUI, 1) CIC biomaGUNE, Basque Research and Technology Alliance (BRTA), 20014 Donostia-San Sebastián, Spain
    Carlos RENERO-LECUNA, 1) CIC biomaGUNE, Basque Research and Technology Alliance (BRTA), 20014 Donostia-San Sebastián, Spain. 2) Centro de Investigación Biomédica en Red de Bioingeniería Biomateriales, y Nanomedicina (CIBER-BBN), 20014 Donostia-San Sebastián, Spain.
    Clara GARCÍA-ASTRAIN, 1) CIC biomaGUNE, Basque Research and Technology Alliance (BRTA), 20014 Donostia-San Sebastián, Spain. 2) Centro de Investigación Biomédica en Red de Bioingeniería Biomateriales, y Nanomedicina (CIBER-BBN), 20014 Donostia-San Sebastián, Spain.
    Luis LIZ-MARZÁN, 1) CIC biomaGUNE, Basque Research and Technology Alliance (BRTA), 20014 Donostia-San Sebastián, Spain. 2) Centro de Investigación Biomédica en Red de Bioingeniería Biomateriales, y Nanomedicina (CIBER-BBN), 20014 Donostia-San Sebastián, Spain. 3) Ikerbasque Basque Foundation for Science, 48009 Bilbao, Spain.
    Malou HENRIKSEN-LACEY, 1) CIC biomaGUNE, Basque Research and Technology Alliance (BRTA), 20014 Donostia-San Sebastián, Spain. 2) Centro de Investigación Biomédica en Red de Bioingeniería Biomateriales, y Nanomedicina (CIBER-BBN), 20014 Donostia-San Sebastián, Spain.
    Dorleta JIMÉNEZ DE ABERASTURI, 1) CIC biomaGUNE, Basque Research and Technology Alliance (BRTA), 20014 Donostia-San Sebastián, Spain. 2) Centro de Investigación Biomédica en Red de Bioingeniería Biomateriales, y Nanomedicina (CIBER-BBN), 20014 Donostia-San Sebastián, Spain. 3) Ikerbasque Basque Foundation for Science, 48009 Bilbao, Spain.

    topicA-11 Stimuli-responsive
    person_pinUxue AIZARNA-LOPETEGUI, 1) CIC biomaGUNE, Basque Research and Technology Alliance (BRTA), 20014 Donostia-San Sebastián, Spain
    P1 - Textiles and fibers - Topography-induced modulation of cell behaviour by alumina ceramic textilesTextiles and fibersDeepanjalee DUTTA, Institute for Biophysics, University of Bremen, Otto-Hahn-Allee 1, 28359 Bremen, Germany
    TITINUN NUNTAPRAMOTE, University of Bremen
    KUROSCH REZWAN, University of Bremen
    DOROTHEA BRÜGGEMANN, University of Bremen

    topicA-12 Textiles and fibers
    person_pinDeepanjalee DUTTA, Institute for Biophysics, University of Bremen, Otto-Hahn-Allee 1, 28359 Bremen, Germany
    P2 - Textiles and fibers - Zinc loaded L-Carnosine biofunctionalized polyacrylonitrile nanofibers with wound healing potentialTextiles and fibersShahin HOMAEIGOHAR, University of Dundee
    Farnaz GHORBANI, University of Erlangen-Nuremberg
    Aldo R. BOCCACCINI, University of Erlangen-Nuremberg

    topicA-12 Textiles and fibers
    person_pinShahin HOMAEIGOHAR, University of Dundee
    P3 - Textiles and fibers - Tribological properties of the lubricated interface between hydrogel fibres and bone tissueTextiles and fibersDeyo MAEZTU REDIN, Centre des Matériaux, CNRS UMR 7633, Mines Paris, PSL University, Évry, France; and Molecular, Macromolecular Chemistry and Materials, CNRS UMR 7167, ESPCI Paris, PSL University, Paris, France
    Paul GUILLOT, Centre des Matériaux, CNRS UMR 7633, Mines Paris, PSL University, Évry, France; and Molecular, Macromolecular Chemistry and Materials, CNRS UMR 7167, ESPCI Paris, PSL University, Paris, France
    Vladislav A. YASTREBOV, Centre des Matériaux, CNRS UMR 7633, Mines Paris, PSL University, Évry, France
    Laurent CORTÉ, Centre des Matériaux, CNRS UMR 7633, Mines Paris, PSL University, Évry, France; and Molecular, Macromolecular Chemistry and Materials, CNRS UMR 7167, ESPCI Paris, PSL University, Paris, France

    topicA-12 Textiles and fibers
    person_pinDeyo MAEZTU REDIN, Centre des Matériaux, CNRS UMR 7633, Mines Paris, PSL University, Évry, France; and Molecular, Macromolecular Chemistry and Materials, CNRS UMR 7167, ESPCI Paris, PSL University, Paris, France
    P4 - Textiles and fibers - Poly (?-caprolactone) process parameter optimized nanofibers promote the growth of 3T3 human cellsTextiles and fibersAndré SOUZA PLATH, ETH Zürich
    Helen GREUTERT , ETH Zürich
    Serena Rosa ALFARANO, ETH Zürich
    Daniel ABBOTT, ETH Zürich
    Stephen FERGUSON, ETH Zurich

    topicA-12 Textiles and fibers
    person_pinAndré SOUZA PLATH, ETH Zürich
    P6 - Textiles and fibers - Optimization of composition and spinning process of copper-chitosan fibers for the production of cytocompatible antibacterial and knittable monofilaments Textiles and fibersRenaud PASSIEUX, Ingénierie des Matériaux Polymères (IMP), Univ Lyon, Université Claude Bernard Lyon 1, CNRS, UMR 5223, F-69622, Villeurbanne, France
    Marie VANDESTEENE, MDB Texinov, F-38110, La Tour du Pin, France
    Martine RENARD, CIC-IT, Université de Bordeaux, INSERM, CHU de Bordeaux, PTIB Hôpital Xavier Arnozan, F-33600 Pessac France
    Guillaume SUDRE, Ingénierie des Matériaux Polymères (IMP), Univ Lyon, Université Claude Bernard Lyon 1, CNRS, UMR 5223, F-69622, Villeurbanne, France
    Alexandra MONTEMBAULT, Ingénierie des Matériaux Polymères (IMP), Univ Lyon, Université Claude Bernard Lyon 1, CNRS, UMR 5223, F-69622, Villeurbanne, France
    Ali HADDANE, Ingénierie des Matériaux Polymères (IMP), Univ Lyon, Université Claude Bernard Lyon 1, CNRS, UMR 5223, F-69622, Villeurbanne, France
    Agnès HAGÈGE, Institute of Analytical Sciences (ISA), Univ Lyon, Université Claude Bernard Lyon 1, CNRS, UMR 5280, Villeurbanne F-69100, France
    Laurence BORDENAVE, BIOTIS , Université de Bordeaux, INSERM, U1026, Bordeaux, France
    Laurent DAVID, Ingénierie des Matériaux Polymères (IMP), Univ Lyon, Université Claude Bernard Lyon 1, CNRS, UMR 5223, F-69622, Villeurbanne, France

    topicA-12 Textiles and fibers
    person_pinLaurence BORDENAVE, BIOTIS , Université de Bordeaux, INSERM, U1026, Bordeaux, France
    P7 - Textiles and fibers - Mechanical and structural properties of textile-like biodegradable membranes fabricated by under-extrusion 3D printingTextiles and fibersLéa DEJOB, Mines Saint-Étienne, Univ Lyon, Univ Jean Monnet, INSERM, U1059 SAINBIOSE, Saint-Étienne F-42023 France
    David EGLIN, Mines Saint-Étienne, Univ Lyon, Univ Jean Monnet, INSERM, U1059 SAINBIOSE, Saint-Étienne F-42023 France

    topicA-12 Textiles and fibers
    person_pinDavid EGLIN, Mines Saint-Étienne, Univ Lyon, Univ Jean Monnet, INSERM, U1059 SAINBIOSE, Saint-Étienne F-42023 France
    P8 - Textiles and fibers - Enhanced Osteointegration of an Artificial Ligament Through a Tailored Local Osteoinductive Product DeliveryTextiles and fibersCédric ZOBRIST, CNRS, INRA, ENSCL UMR8207, UMET – Unité Matériaux et Transformations, Université de Lille, Lille, France
    Salim HAMIDI, INSERM, CHU Lille, U1008 – Controlled Drug Delivery Systems and Biomaterials, Université de Lille, Lille, France
    Feng CHAI, INSERM, CHU Lille, U1008 – Controlled Drug Delivery Systems and Biomaterials, Université de Lille, Lille, France
    Mehdi DAOUDI, Cousin Surgery
    Stephanie DEGOUTIN, CNRS, INRA, ENSCL UMR8207, UMET – Unité Matériaux et Transformations, Université de Lille, Lille, France
    Stéphane NOEL, Cousin Surgery
    Nicolas BLANCHEMAIN, INSERM, CHU Lille, U1008 – Controlled Drug Delivery Systems and Biomaterials, Université de Lille, Lille, France
    Bernard MARTEL, CNRS, INRA, ENSCL UMR8207, UMET – Unité Matériaux et Transformations, Université de Lille, Lille, France

    topicA-12 Textiles and fibers
    person_pinCédric ZOBRIST, CNRS, INRA, ENSCL UMR8207, UMET – Unité Matériaux et Transformations, Université de Lille, Lille, France
    P10 - Textiles and fibers - Strong Polycaprolactone fibers with modified morphology as a building block for Tissue Engineering of slowly healing tissueTextiles and fibersBenedict BAUER, Institut für Textiltechnik of RWTH Aachen University
    Caroline EMONTS, Institut für Textiltechnik of RWTH Aachen University
    Rokaya ANNAN, Institut für Textiltechnik of RWTH Aachen University
    Thomas GRIES, Institut für Textiltechnik of RWTH Aachen University

    topicA-12 Textiles and fibers
    person_pinBenedict BAUER, Institut für Textiltechnik of RWTH Aachen University
    P11 - Textiles and fibers - 3D-Braided PCL Scaffolds for Ligament Tissue EngineeringTextiles and fibersCaroline EMONTS, Institut für Textiltechnik, RWTH Aachen University, Aachen, Germany
    Benedict BAUER, Institut für Textiltechnik, RWTH Aachen University, Aachen, Germany
    David WIENEN, Institut für Textiltechnik, RWTH Aachen University, Aachen, Germany
    Thomas GRIES, Institut für Textiltechnik, RWTH Aachen University, Aachen, Germany

    topicA-12 Textiles and fibers
    person_pinCaroline EMONTS, Institut für Textiltechnik, RWTH Aachen University, Aachen, Germany
    P1 - Additive manufacturing - Photo-crosslinkable gelatin-based bio-inks as strategy towards patient-specific breast reconstructionAdditive manufacturingLana VAN DAMME, Polymer Chemistry & Biomaterials Group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Phillip BLONDEEL, Department of Plastic & Reconstructive Surgery, Ghent University Hospital, Corneel Heymanslaan 10, 2K12, 9000 Ghent, Belgium
    Sandra VAN VLIERBERGHE, 1. Polymer Chemistry & Biomaterials Group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Krijgslaan 281, S4-Bis, 9000 Ghent, Belgium.

    topicB-02 Additive manufacturing
    person_pinLana VAN DAMME, Polymer Chemistry & Biomaterials Group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    P2 - Additive manufacturing - Characterization and Modeling of Functional Gradients for Enabling Tough Biomimetic DevicesAdditive manufacturingMauricio CRUZ SALDIVAR, Department of Biomechanical Engineering, Faculty of 3mE, Delft University of Technology, Delft, The Netherlands
    Robin P.E. VEEGER, Department of Biomechanical Engineering, Faculty of 3mE, Delft University of Technology, Delft, The Netherlands
    Quentin GROSSMAN, Mechanics of Biological and Bioinspired Materials Laboratory, Department of Aerospace and Mechanical Engineering, University of Liège, Liège, Belgium
    Astrid CANTAMESSA, Mechanics of Biological and Bioinspired Materials Laboratory, Department of Aerospace and Mechanical Engineering, University of Liège, Liège, Belgium
    Davide RUFFONI, Mechanics of Biological and Bioinspired Materials Laboratory, Department of Aerospace and Mechanical Engineering, University of Liège, Liège, Belgium
    Eugeni L. DOUBROVSKI, Faculty of Industrial Design Engineering, Delft University of Technology, Delft, The Netherlands
    Mohammad J. MIRZAALI, Department of Biomechanical Engineering, Faculty of 3mE, Delft University of Technology, Delft, The Netherlands
    Amir A. ZADPOOR, Department of Biomechanical Engineering, Faculty of 3mE, Delft University of Technology, Delft, The Netherlands

    topicB-02 Additive manufacturing
    person_pinMauricio CRUZ SALDIVAR, Department of Biomechanical Engineering, Faculty of 3mE, Delft University of Technology, Delft, The Netherlands
    P4 - Additive manufacturing - Micellar nitric oxide-releasing hydrogels for DLP-based 3D printingAdditive manufacturingMarcelo GANZAROLLI DE OLIVEIRA, Institute of Chemistry, University of Campinas, UNICAMP, Campinas, SP, Brazil
    Mateus PERES BOMEDIANO, Institute of Chemistry, University of Campinas, UNICAMP, Campinas, SP, Brazil
    Murilo IZIDORO SANTOS, Institute of Chemistry, University of Campinas, UNICAMP, Campinas, SP, Brazil
    Giovanna J.V.P. DOS SANTOS, Institute of Chemistry, University of Campinas, UNICAMP, Campinas, SP, Brazil
    Laura CAETANO ESCOBAR DA SILVA, Institute of Chemistry, University of Campinas, UNICAMP, Campinas, SP, Brazil

    topicB-02 Additive manufacturing
    person_pinMarcelo GANZAROLLI DE OLIVEIRA, Institute of Chemistry, University of Campinas, UNICAMP, Campinas, SP, Brazil
    P5 - Additive manufacturing - Effect of Storage and Reuse on powder properties for powder bed fusion – laser beam of WE43 magnesium alloyAdditive manufacturingGiulio CAVALIERE, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    Francesco D´ELIA, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    Pelle MELLIN, Swerim AB, Kista, Sweden
    Cecilia PERSSON, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden

    topicB-02 Additive manufacturing
    person_pinGiulio CAVALIERE, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    P6 - Additive manufacturing - Preparation of elastomeric polyurethane photo-curable resins for stereolithography 3D printingAdditive manufacturingP. NAVARRETE-SEGADO, Biomaterials and Regenerative Medicine Group, IMDEA Materials Institute, C/Eric Kandel, 2, 28906, Getafe, Madrid, Spain
    J. P. FERNÁNDEZ-BLÁZQUEZ, IMDEA Materials Institute, C/Eric Kandel, 2, 28906, Getafe, Madrid, Spain
    A. CASTRO, Biomaterials and Regenerative Medicine Group, IMDEA Materials Institute, C/Eric Kandel, 2, 28906, Getafe, Madrid, Spain
    A. CAMACHO, Biomaterials and Regenerative Medicine Group, IMDEA Materials Institute, C/Eric Kandel, 2, 28906, Getafe, Madrid, Spain
    J. PATTERSON, Biomaterials and Regenerative Medicine Group, IMDEA Materials Institute, C/Eric Kandel, 2, 28906, Getafe, Madrid, Spain

    topicB-02 Additive manufacturing
    person_pinP. NAVARRETE-SEGADO, Biomaterials and Regenerative Medicine Group, IMDEA Materials Institute, C/Eric Kandel, 2, 28906, Getafe, Madrid, Spain
    P7 - Additive manufacturing - 3D-Printed Biodegradable Hybrids for Bone Regeneration ApplicationsAdditive manufacturinghaffsah IQBAL, Imperial College London, London, UK
    Athanasios SKANDALIS, Department of Materials, Imperial College London, London, UK
    David SORY, Faculty of Medicine, National Heart & Lung Institute, Imperial College London, London, UK
    Yu-Chien LIN, Department of Materials, Imperial College London, London, UK
    Theoni GEORGIOU, Department of Materials, Imperial College London, London, UK
    Julian JONES, Department of Materials, Imperial College London, London, UK

    topicB-02 Additive manufacturing
    person_pinhaffsah IQBAL, Imperial College London, London, UK
    P10 - Additive manufacturing - Additive manufacturing of zirconia-based ceramics by laser stereolithography for jawbone implants applicationsAdditive manufacturingSylvain FOURNIER, Mateis
    Guilhem BAEZA, Mateis
    Jérôme CHEVALIER, Mateis
    Helen REVERON, Mateis

    topicB-02 Additive manufacturing
    person_pinJérôme CHEVALIER, Mateis
    P11 - Additive manufacturing - Effect of Graphene-Based Nanomaterials on Photocurable PLA Resin: Study of Curing Depth and Optimization of Exposure Time on LCD 3D PrintingAdditive manufacturingEva PAZ, Institute for Research in Technology/Mechanical Engineering Dept., Universidad Pontificia Comillas, Madrid, Spain
    Sara LOPEZ DE ARMENTIA, Institute for Research in Technology/Mechanical Engineering Dept., Universidad Pontificia Comillas, Madrid, Spain
    Mariano JIMENEZ, Institute for Research in Technology/Mechanical Engineering Dept., Universidad Pontificia Comillas, Madrid, Spain
    Juan Carlos DEL REAL, Institute for Research in Technology/Mechanical Engineering Dept., Universidad Pontificia Comillas, Madrid, Spain
    Nicholas DUNNE, School of Mechanical and Manufacturing Engineering, Dublin City University, Dublin, Ireland

    topicB-02 Additive manufacturing
    person_pinEva PAZ, Institute for Research in Technology/Mechanical Engineering Dept., Universidad Pontificia Comillas, Madrid, Spain
    P12 - Additive manufacturing - Development of Zirconia Toughened Alumina Composites Reinforced with Carbon Phases for Application as Femoral Heads of Hip ProsthesesAdditive manufacturingVivian INÊS DOS SANTOS, Univ Lyon, CNRS, INSA Lyon, UCBL, MATEIS, UMR5510, 69100 Villeurbanne, France
    Bruno ALEXANDRE PACHECO DE CASTRO HENRIQUES, Mechanical Engineering Department, Federal University of Santa Catarina, Florianópolis, SC, 88040-900, Brazil
    Márcio CELSO FREDEL, Mechanical Engineering Department, Federal University of Santa Catarina, Florianópolis, SC, 88040-900, Brazil
    Laurent GREMILLARD, Univ Lyon, CNRS, INSA Lyon, UCBL, MATEIS, UMR5510, 69100 Villeurbanne, France

    topicB-02 Additive manufacturing
    person_pinVivian INÊS DOS SANTOS, Univ Lyon, CNRS, INSA Lyon, UCBL, MATEIS, UMR5510, 69100 Villeurbanne, France
    P13 - Additive manufacturing - Hybrid Resins for the 3D Printing of Nitric Oxide-Releasing Blood Contacting DevicesAdditive manufacturingLaura DA SILVA, Institute of Chemistry, University of Campinas, UNICAMP
    Elizaura SILVA, Institute of Chemistry, University of Campinas, UNICAMP
    Giovana ROMANO, Institute of Chemistry, University of Campinas, UNICAMP
    Marcelo DE OLIVEIRA, Institute of Chemistry, University of Campinas, UNICAMP

    topicB-02 Additive manufacturing
    person_pinLaura DA SILVA, Institute of Chemistry, University of Campinas, UNICAMP
    P14 - Additive manufacturing - Digital Light Processing of biocompatible acrylate-endcapped poly(e-caprolactone)-based resins into porous shape memory scaffolds towards minimally invasive breast reconstructionAdditive manufacturingCoralie GREANT, Polymer Chemistry & Biomaterials Group – Centre of Macromolecular Chemistry (CMaC) – Department of Organic and Macromolecular Chemistry, Ghent University, Krijgslaan 281, S4-Bis, 9000 Ghent, Belgium
    Bo VAN DURME, Polymer Chemistry & Biomaterials Group – Centre of Macromolecular Chemistry (CMaC) – Department of Organic and Macromolecular Chemistry, Ghent University, Krijgslaan 281, S4-Bis, 9000 Ghent, Belgium
    Lana VAN DAMME, Polymer Chemistry & Biomaterials Group – Centre of Macromolecular Chemistry (CMaC) – Department of Organic and Macromolecular Chemistry, Ghent University, Krijgslaan 281, S4-Bis, 9000 Ghent, Belgium
    Sandra VAN VLIERBERGHE, Polymer Chemistry & Biomaterials Group – Centre of Macromolecular Chemistry (CMaC) – Department of Organic and Macromolecular Chemistry, Ghent University, Krijgslaan 281, S4-Bis, 9000 Ghent, Belgium

    topicB-02 Additive manufacturing
    person_pinCoralie GREANT, Polymer Chemistry & Biomaterials Group – Centre of Macromolecular Chemistry (CMaC) – Department of Organic and Macromolecular Chemistry, Ghent University, Krijgslaan 281, S4-Bis, 9000 Ghent, Belgium
    P15 - Additive manufacturing - PATIENT-SPECIFIC PRINTING OF CONDUCTIVE BIPHASIC PEDOT:PSS-HYALURONIC ACID SCAFFOLDS FOR SPINAL CORD REPAIR.Additive manufacturingIan WOODS, Tissue Engineering Research Group, Dept. of Anatomy & Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland
    Liam LEAHY, Tissue Engineering Research Group, Dept. of Anatomy & Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland
    William PHAIR, Tissue Engineering Research Group, Dept. of Anatomy & Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland
    Adrian DERVAN, Tissue Engineering Research Group, Dept. of Anatomy & Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland
    Fergal O'BRIEN, Tissue Engineering Research Group, Dept. of Anatomy & Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland; 3Advanced Materials Bio-Engineering Research Centre (AMBER), Trinity College Dublin & Royal College of Surgeons in Ireland, Dublin 2, Ireland

    topicB-02 Additive manufacturing
    person_pinFergal O'BRIEN, Tissue Engineering Research Group, Dept. of Anatomy & Regenerative Medicine, Royal College of Surgeons in Ireland, Dublin, Ireland; 3Advanced Materials Bio-Engineering Research Centre (AMBER), Trinity College Dublin & Royal College of Surgeons in Ireland, Dublin 2, Ireland
    P18 - Additive manufacturing - Combining Melt Electrowriting with other 3D printing techniques towards regenerative implants Additive manufacturingMax VON WITZLEBEN, Technische Universität Dresden, Faculty of Medicine, Center for Translational Bone, Joint and Soft Tissue Research, Dresden, Germany
    David KILIAN, Technische Universität Dresden, Faculty of Medicine, Center for Translational Bone, Joint and Soft Tissue Research, Dresden, Germany
    Alina ZEINALOVA, Technische Universität Dresden, Faculty of Medicine, Center for Translational Bone, Joint and Soft Tissue Research, Dresden, Germany
    Marlene IHLE, Technische Universität Dresden, Faculty of Medicine, Center for Translational Bone, Joint and Soft Tissue Research, Dresden, Germany
    Emily STEYER, Technische Universität Dresden, Faculty of Medicine, Center for Translational Bone, Joint and Soft Tissue Research, Dresden, Germany
    Tilman AHLFELD, Technische Universität Dresden, Faculty of Medicine, Center for Translational Bone, Joint and Soft Tissue Research, Dresden, Germany
    Anne BERNHARDT, Technische Universität Dresden, Faculty of Medicine, Center for Translational Bone, Joint and Soft Tissue Research, Dresden, Germany
    Anja LODE, Technische Universität Dresden, Faculty of Medicine, Center for Translational Bone, Joint and Soft Tissue Research, Dresden, Germany
    Michael GELINSKY, Technische Universität Dresden, Faculty of Medicine, Center for Translational Bone, Joint and Soft Tissue Research, Dresden, Germany

    topicB-02 Additive manufacturing
    person_pinMax VON WITZLEBEN, Technische Universität Dresden, Faculty of Medicine, Center for Translational Bone, Joint and Soft Tissue Research, Dresden, Germany
    P19 - Additive manufacturing - CO2 laser-based powder reactive sintering towards bioactive glassesAdditive manufacturingLouis CHAIGNEAU, Univ Rennes, ISCR, CNRS-UMR 6226, Eq. Verres & Céramiques, F-35000 Rennes
    Agnès NOVELLA, Univ Rennes, ISCR, CNRS-UMR 6226, Eq. Verres & Céramiques, CHU Rennes, Pôle Odontologie, F-35000 Rennes
    Coralie DESBORDES, Univ Rennes, ISCR, CNRS-UMR 6226, F-35000 Rennes
    François CHEVIRE, Univ Rennes, ISCR, CNRS-UMR 6226, Eq. Verres & Céramiques , F-35000 Rennes
    Damien BREZULIER, Univ Rennes, ISCR, CNRS-UMR 6226, Eq. Verres & Céramiques, CHU Rennes, Pôle Odontologie, F-35000 Rennes
    Ronan LEBULLENGER, Univ Rennes, ISCR, CNRS-UMR 6226, Eq. Verres & Céramiques , F -35000 Rennes

    topicB-02 Additive manufacturing
    person_pinRonan LEBULLENGER, Univ Rennes, ISCR, CNRS-UMR 6226, Eq. Verres & Céramiques , F -35000 Rennes
    P20 - Additive manufacturing - Fused filament fabrication (FFF) of PLA/bioglass composite and enhancement of these mechanical properties with gold coating thin film of bioglass powderAdditive manufacturingLouis CHAIGNEAU, Univ Rennes, ISCR, CNRS-UMR 6226, Eq. Verres & Céramiques
    Aurélien PERROT, ECAM Rennes - Louis de Broglie & Univ Rennes, ISCR, CNRS-UMR 6226
    Jean-François COULON, ECAM Rennes - Louis de Broglie - Campus de Ker Lann - Bruz
    Damien BREZULIER, Univ Rennes, ISCR, CNRS-UMR 6226, Eq. Verres & Céramiques, CHU Rennes, Pôle Odontologie
    François CHEVIRE, Univ Rennes, ISCR, CNRS-UMR 6226, Equipe Verres & Céramiques
    Ronan LEBULLENGER, Univ Rennes, ISCR, CNRS-UMR 6226, Eq. Verres & Céramiques

    topicB-02 Additive manufacturing
    person_pinRonan LEBULLENGER, Univ Rennes, ISCR, CNRS-UMR 6226, Eq. Verres & Céramiques
    P21 - Additive manufacturing - Synthesis and Characterization of collagen based bio-ink for 3D printed meniscus with improved mechanical propertiesAdditive manufacturingAlfredo RONCA, Institute of Polymers, Composites and Biomaterials – National Research Council
    Ugo D'AMORA, Institute of Polymers, Composites and Biomaterials – National Research Council
    Carla ZIHLMANN, Geistlich Pharma AG (Geistlich),
    Stiefel NIKLAUS, Geistlich Pharma AG (Geistlich),
    Anna ABBADESSA, University of Santiago de Compostela (USC)
    Anna GUILFORD, Tissue Click Ltd (TC)
    Luigi AMBROSIO, Institute of Polymers, Composites and Biomaterials – National Research Council

    topicB-02 Additive manufacturing
    person_pinAlfredo RONCA, Institute of Polymers, Composites and Biomaterials – National Research Council
    P22 - Additive manufacturing - Influence of anodic oxidation on the biocompatibility of Ti6Al4V implants made by the SLM methodAdditive manufacturingAda ORLOWSKA, Department of Biomaterials and Medical Device Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    Janusz SZEWCZENKO, Department of Biomaterials and Medical Device Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    Wojciech KAJZER, Department of Biomaterials and Medical Device Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    Karolina GOLDSZTAJN, Department of Biomaterials and Medical Device Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    Marcin BASIAGA, Department of Biomaterials and Medical Device Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland

    topicB-02 Additive manufacturing
    person_pinJanusz SZEWCZENKO, Department of Biomaterials and Medical Device Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    P23 - Additive manufacturing - Photocurable Resin for 3D Printed Metamaterials towards Biomedical ApplicationsAdditive manufacturingValentina CIRILLO, Tissium
    Estelle COLLIN, Tissium
    Débora CASTEL, Tissium
    David MOREAU, Tissium
    Marie MALAFOSSE, Tissium
    Maria PEREIRA, Tissium

    topicB-02 Additive manufacturing
    person_pinMaria PEREIRA, Tissium
    P24 - Additive manufacturing - How Simple Surface Treatments Modify Primary Human Osteoblast Response to Additively Manufactured Titanium ScaffoldsAdditive manufacturingEdgar B. MONTUFAR, Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic
    Anna DIEZ-ESCUDERO, Department of Surgical Sciences, Uppsala University Hospital, Uppsala, Sweden
    Adelia KASHIMBETOVA, Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic
    Karel SLAMESKA, Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic
    Ladislav CELKO, Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic
    Nils P. HAILER, Department of Surgical Sciences, Uppsala University Hospital, Uppsala, Sweden

    topicB-02 Additive manufacturing
    person_pinEdgar B. MONTUFAR, Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic
    P25 - Additive manufacturing - Establishing a new photo-crosslinkable poly(epsilon-caprolactone)-based material for tubular melt electrowritten constructs with predefined architecture and tunable mechanical propertiesAdditive manufacturingMichael BARTOLF-KOPP, Department for Functional Materials in Medicine and Dentistry and Bavarian Polymer Institute (FMZ), University of Würzburg, Pleicherwall 2, 97070 Würzburg, Germany
    Nele PIEN, Polymer Chemistry & Biomaterials Research Group, Centre of Macromolecular Chemistry (CMaC), Ghent University, Krijgslaan 281 S4bis, 9000 Gent, Belgium
    Laurens PARMENTIER, Polymer Chemistry & Biomaterials Research Group, Centre of Macromolecular Chemistry (CMaC), Ghent University, Krijgslaan 281 S4bis, 9000 Gent, Belgium
    Jasper DELAEY, Polymer Chemistry & Biomaterials Research Group, Centre of Macromolecular Chemistry (CMaC), Ghent University, Krijgslaan 281 S4bis, 9000 Gent, Belgium
    Lobke DE VOS, Polymer Chemistry & Biomaterials Research Group, Centre of Macromolecular Chemistry (CMaC), Ghent University, Krijgslaan 281 S4bis, 9000 Gent, Belgium
    Diego MANTOVANI, Laboratory for Biomaterials and Bioengineering, CRC-I, Laval University, Pavillon Pouliot, Québec G1V 0A6, Canada
    Sandra Van Vlierberghe SANDRA VAN VLIERBERGHE, Polymer Chemistry & Biomaterials Research Group, Centre of Macromolecular Chemistry (CMaC), Ghent University, Krijgslaan 281 S4bis, 9000 Gent, Belgium
    Peter DUBRUEL, Polymer Chemistry & Biomaterials Research Group, Centre of Macromolecular Chemistry (CMaC), Ghent University, Krijgslaan 281 S4bis, 9000 Gent, Belgium
    Tomasz JÜNGST, Department for Functional Materials in Medicine and Dentistry and Bavarian Polymer Institute (FMZ), University of Würzburg, Pleicherwall 2, 97070 Würzburg, Germany

    topicB-02 Additive manufacturing
    person_pinMichael BARTOLF-KOPP, Department for Functional Materials in Medicine and Dentistry and Bavarian Polymer Institute (FMZ), University of Würzburg, Pleicherwall 2, 97070 Würzburg, Germany
    P27 - Additive manufacturing - Biocompatibility of Ti-Nb and Ti-Zr-Nb alloys generated by means of laser additive manufacturingAdditive manufacturingFelipe ARIAS-GONZÁLEZ, LaserOn Research Group, CINTECX, School of Engineering, UVIGO, Vigo, Spain
    Alejandra RODRÍGUEZ-CONTRERAS, BBT Research Group, Materials Science and Engineering Department, UPC, Barcelona, Spain
    Miquel PUNSET, BBT Research Group, Materials Science and Engineering Department, UPC, Barcelona, Spain
    José María MANERO, BBT Research Group, Materials Science and Engineering Department, UPC, Barcelona, Spain
    Óscar BARRO, LaserOn Research Group, CINTECX, School of Engineering, UVIGO, Vigo, Spain
    Mónica FERNÁNDEZ-ARIAS, LaserOn Research Group, CINTECX, School of Engineering, UVIGO, Vigo, Spain
    Fernando LUSQUIÑOS, LaserOn Research Group, CINTECX, School of Engineering, UVIGO, Vigo, Spain
    Francisco Javier GIL, School of Dentistry, UIC, Sant Cugat del Vallès, Spain
    Juan POU, LaserOn Research Group, CINTECX, School of Engineering, UVIGO, Vigo, Spain

    topicB-02 Additive manufacturing
    person_pinFelipe ARIAS-GONZÁLEZ, LaserOn Research Group, CINTECX, School of Engineering, UVIGO, Vigo, Spain
    P28 - Additive manufacturing - 3D Printing of an Electroconductive Scaffold for the Promotion of Axonal Regrowth after Spinal Cord InjuryAdditive manufacturingLiam M. LEAHY, Tissue Engineering Research Group, Dept. of Anatomy & Regenerative Medicine, RCSI, Dublin, Ireland, Advanced Materials and Bioengineering Research Centre (AMBER), RCSI and TCD, Dublin, Ireland
    Ian WOODS, Tissue Engineering Research Group, Dept. of Anatomy & Regenerative Medicine, RCSI, Dublin, Ireland; Advanced Materials and Bioengineering Research Centre (AMBER), RCSI and TCD, Dublin, Ireland
    Javier GUTIERREZ-GONZALEZ, Tissue Engineering Research Group, Dept. of Anatomy & Regenerative Medicine, RCSI, Dublin, Ireland; Advanced Materials and Bioengineering Research Centre (AMBER), RCSI and TCD, Dublin, Ireland; School of Chemistry, TCD, Dublin, Ireland
    Michael G. MONAGHAN, Advanced Materials and Bioengineering Research Centre (AMBER), RCSI and TCD, Dublin, Ireland; Trinity Centre for Biomedical Engineering
    Adrian DERVAN, Tissue Engineering Research Group, Dept. of Anatomy & Regenerative Medicine, RCSI, Dublin, Ireland; Advanced Materials and Bioengineering Research Centre (AMBER), RCSI and TCD, Dublin, Ireland
    Fergal J. O'BRIEN, Tissue Engineering Research Group, Dept. of Anatomy & Regenerative Medicine, RCSI, Dublin, Ireland; Advanced Materials and Bioengineering Research Centre (AMBER), RCSI and TCD, Dublin, Ireland; Trinity Centre for Biomedical Engineering
    Jack MAUGHAN, Tissue Engineering Research Group, Dept. of Anatomy & Regenerative Medicine, RCSI, Dublin, Ireland; Advanced Materials and Bioengineering Research Centre (AMBER), RCSI and TCD, Dublin, Ireland; Trinity Centre for Biomedical Engineering

    topicB-02 Additive manufacturing
    person_pinJack MAUGHAN, Tissue Engineering Research Group, Dept. of Anatomy & Regenerative Medicine, RCSI, Dublin, Ireland; Advanced Materials and Bioengineering Research Centre (AMBER), RCSI and TCD, Dublin, Ireland; Trinity Centre for Biomedical Engineering
    P29 - Additive manufacturing - 3D printed PLA scaffolds wth double porosity for bone tissue engineeringAdditive manufacturingMatteo PITTON, Department of Chemistry, Materials and Chemical Engineering G. Natta, Politecnico di Milano, Milan, IT
    Davide PELLEGATTA, Department of Chemistry, Materials and Chemical Engineering G. Natta, Politecnico di Milano, Milan, IT
    Davide VANDONI, Department of Chemistry, Materials and Chemical Engineering G. Natta, Politecnico di Milano, Milan, IT
    Nicola CONTESSI NEGRINI, Department of Chemistry, Materials and Chemical Engineering G. Natta, Politecnico di Milano, Milan, IT
    Silvia FARE', Department of Chemistry, Materials and Chemical Engineering G. Natta, Politecnico di Milano, Milan, IT; National Interuniversity Consortium of Materials Science and Technology - INSTM, Florence, IT

    topicB-02 Additive manufacturing
    person_pinMatteo PITTON, Department of Chemistry, Materials and Chemical Engineering G. Natta, Politecnico di Milano, Milan, IT
    P30 - Additive manufacturing - The impact of Residual Stresses formed during PBF-LB on the Biodegradability of Magnesium alloysAdditive manufacturingLisa LARSSON, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    Hanna NILSSON ÅHMAN, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden; Swerim AB, Stockholm, Sweden
    Tuerdi MAIMAITIYILI, Swerim AB, Stockholm, Sweden
    Cecilia PERSSON, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden

    topicB-02 Additive manufacturing
    person_pinLisa LARSSON, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    P31 - Additive manufacturing - Designing and Evaluating Tailorable 3D-printed Metamaterials for Lower Limb ProsthesesAdditive manufacturingVasja PLESEC, Faculty of Mechanical Engineering, University of Maribor
    Gregor HARIH, Faculty of Mechanical Engineering, University of Maribor

    topicB-02 Additive manufacturing
    person_pinVasja PLESEC, Faculty of Mechanical Engineering, University of Maribor
    P32 - Additive manufacturing - 3D Screen Printing Technology for Silicones in Biomedical ApplicationsAdditive manufacturingVedrana TADIC KRIPPENDORF, Axenoll 3D Printing GmbH
    Luisa UNGELENK, Axenoll 3D Printing GmbH
    Nicolle SCHWARZ, Axenoll 3D Printing GmbH

    topicB-02 Additive manufacturing
    person_pinVedrana TADIC KRIPPENDORF, Axenoll 3D Printing GmbH
    P33 - Additive manufacturing - In vitro biological evaluation and degradation study of a 3D-printed polyurethane stent-graft for customized endovascular repair of abdominal aortic aneurysmAdditive manufacturingMarie-Stella M'BENGUE, 1.Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems (ADDS), F-59000 Lille, France 2.Univ. Lille, CNRS, INRAE, Centrale Lille, UMR 8207 – Unité Matériaux et Transformations (UMET), F-59000 Lille, France
    Thomas MESNARD, 1.Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems (ADDS), F-59000 Lille, France 2.Institut Coeur Poumon, Hospital Center University of Lille (CHU Lille), 2 avenue Oscar Lambret, 59000 Lille, France
    Mickaël MATON, Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems (ADDS), F-59000 Lille, France
    Valérie GAUCHER, Univ. Lille, CNRS, INRAE, Centrale Lille, UMR 8207 – Unité Matériaux et Transformations (UMET), F-59000 Lille, France
    Nicolas TABARY, Univ. Lille, CNRS, INRAE, Centrale Lille, UMR 8207 – Unité Matériaux et Transformations (UMET), F-59000 Lille, France
    Maria-José GARCÍA-FERNANDEZ, Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems (ADDS), F-59000 Lille, France
    Jonathan SOBOCINSKI, 1.Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems (ADDS), F-59000 Lille, France 2.Institut Coeur Poumon, Hospital Center University of Lille (CHU Lille), 2 avenue Oscar Lambret, 59000 Lille, France
    Feng CHAI, Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems (ADDS), F-59000 Lille, France
    Bernard MARTEL, Univ. Lille, CNRS, INRAE, Centrale Lille, UMR 8207 – Unité Matériaux et Transformations (UMET), F-59000 Lille, France
    Nicolas BLANCHEMAIN, Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems (ADDS), F-59000 Lille, France

    topicB-02 Additive manufacturing
    person_pinMarie-Stella M'BENGUE, 1.Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems (ADDS), F-59000 Lille, France 2.Univ. Lille, CNRS, INRAE, Centrale Lille, UMR 8207 – Unité Matériaux et Transformations (UMET), F-59000 Lille, France
    P34 - Additive manufacturing - Hydrogel Manufacturing via novel 3D Screen Printing TechnologyAdditive manufacturingLuisa UNGELENK, Axenoll 3D Printing GmbH
    Dana ELSTER, Axenoll 3D Printing GmbH
    Vedrana TADIC KRIPPENDORF, Axenoll 3D Printing GmbH
    Nicolle SCHWARZ, Axenoll 3D Printing GmbH

    topicB-02 Additive manufacturing
    person_pinVedrana TADIC KRIPPENDORF, Axenoll 3D Printing GmbH
    P35 - Additive manufacturing - Arburg Freeformer Process Optimization for Manufacturing Biodegradable Ureteral StentsAdditive manufacturingLeonardo GALLI ENGLER, 1 Material Research Institute, Technological University of the Shannon: Midlands Midwest, Athlone, Ireland; 2 Applied Polymer Technologies, Technological University of the Shannon: Midlands Midwest, Athlone, Ireland; 3 Programa de Pós-Graduação em Engenharia e Ciência dos Materiais, University of Caxias do Sul, Caxias do Sul, Brazil.
    Noel GATELY, Applied Polymer Technologies, Technological University of the Shannon: Midlands Midwest, Athlone, Ireland
    Ian MAJOR, Material Research Institute, Technological University of the Shannon: Midlands Midwest, Athlone, Ireland
    Janaina CRESPO, Programa de Pós-Graduação em Engenharia e Ciência dos Materiais, University of Caxias do Sul, Caxias do Sul, Brazil.
    Declan DEVINE, Material Research Institute, Technological University of the Shannon: Midlands Midwest, Athlone, Ireland

    topicB-02 Additive manufacturing
    person_pinLeonardo GALLI ENGLER, 1 Material Research Institute, Technological University of the Shannon: Midlands Midwest, Athlone, Ireland; 2 Applied Polymer Technologies, Technological University of the Shannon: Midlands Midwest, Athlone, Ireland; 3 Programa de Pós-Graduação em Engenharia e Ciência dos Materiais, University of Caxias do Sul, Caxias do Sul, Brazil.
    P36 - Additive manufacturing - Investigation of Porous Materials for the Release of Hydrogel-bound Drugs made by Fused Filament Fabrication (FFF) and Melt-Electrospinning (MES)Additive manufacturingCarsten LINTI, Deutsche Institute für Textil- und Faserforschung Denkendorf DITF
    Andreas SCHERRIEBLE, Deutsche Institute für Textil- und Faserforschung Denkendorf DITF
    Manuela SCHÖN, Deutsche Institute für Textil- und Faserforschung Denkendorf DITF
    Carla SIEGLE, Deutsche Institute für Textil- und Faserforschung Denkendorf DITF
    Götz GRESSER, Deutsche Institute für Textil- und Faserforschung Denkendorf DITF
    Michael DOSER, Deutsche Institute für Textil- und Faserforschung Denkendorf DITF

    topicB-02 Additive manufacturing
    person_pinCarsten LINTI, Deutsche Institute für Textil- und Faserforschung Denkendorf DITF
    P37 - Additive manufacturing - 3D printing of PEGDA hydrogel scaffold by photopolymerization on LumenX. In vitro and in vivo biocompatibility.Additive manufacturingJulien CLAUZEL, INSERM ToNIC UMR1214
    Lorenne ROBERT, INSERM ToNIC UMR1214
    Nina COLITTI, INSERM ToNIC UMR1214
    Maylis COMBEAU, INSERM ToNIC UMR1214
    Carla CIRILLO, INSERM ToNIC UMR1214
    Wafae LABRIJI, INSERM ToNIC UMR1214
    Franck DESMOULIN, INSERM ToNIC UMR1214
    Isabelle LOUBINOUX, INSERM ToNIC UMR1214

    topicB-02 Additive manufacturing
    person_pinJulien CLAUZEL, INSERM ToNIC UMR1214
    P38 - Additive manufacturing - Optimization of titanium spinal cages to maximize synthetic graft content in composite implants Additive manufacturingSalim GHANDOUR, Uppsala University
    Per ISAKSSON, Uppsala University
    Cecilia PERSSON, Uppsala University

    topicB-02 Additive manufacturing
    person_pinSalim GHANDOUR, Uppsala University
    P39 - Additive manufacturing - Surface free energy dominates the biological interactions of post processed additively manufactured Ti-6Al-4VAdditive manufacturingVictor Manuel VILLAPUN PUZAS, School of Chemical Engineering, University of Birmingham, Edgbaston B15 2TT, United Kingdom
    Luke N. CARTER, School of Chemical Engineering, University of Birmingham, Edgbaston B15 2TT, United Kingdom
    Christian SCHRÖDER, School of Chemistry, CRANN and AMBER Research Centres, Trinity College Dublin, College Green, Dublin 2, Ireland
    Paula E. COLAVITA, School of Chemistry, CRANN and AMBER Research Centres, Trinity College Dublin, College Green, Dublin 2, Ireland
    David A. HOEY, Trinity Biomedical Sciences Institute, Trinity College, Trinity Centre for Biomedical Engineering, Dublin, Ireland
    Mark A. WEBBER, Quadram Institute Bioscience, Norwich Research Park, NR4 7UQ
    Owen ADDISON, Faculty of Dentistry, Oral and Craniofacial Sciences, King’s College London, London, SE1 9RT
    Duncan E.T. SHEPHERD, School of Engineering, University of Birmingham, Edgbaston B15 2TT, UK
    Moataz M. ATTALLAH, School of Materials and Metallurgy, University of Birmingham, Edgbaston B15 2TT, UK
    Liam M. GROVER, School of Chemical Engineering, University of Birmingham, Edgbaston B15 2TT, United Kingdom
    Sophie C. COX, School of Chemical Engineering, University of Birmingham, Edgbaston B15 2TT, United Kingdom

    topicB-02 Additive manufacturing
    person_pinVictor Manuel VILLAPUN PUZAS, School of Chemical Engineering, University of Birmingham, Edgbaston B15 2TT, United Kingdom
    P41 - Additive manufacturing - 3D printing of hybrid gradient scaffolds for native tissues reconstructionAdditive manufacturingMalgorzata WLODARCZYK-BIEGUN, Polymer Science, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands; Biotechnology Center, Silesian University of Technology, Krzywoustego 8, 44-122 Gliwice, Poland
    Pavan KUMAR GUDETI, Biotechnology Center, Silesian University of Technology, Krzywoustego 8, 44-122 Gliwice, Poland
    Piotr ZIELINSKI, Polymer Science, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands
    Rency GEEVARGHESE, Biotechnology Center, Silesian University of Technology, Krzywoustego 8, 44-122 Gliwice, Poland
    Magdalena GLADYSZ, Polymer Science, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands
    Frendion MARCHENA, Polymer Science, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands;
    Xixi WU, Polymer Science, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands
    Marcus KOCH, Leibniz Institute for New Materials, Campus D2 2, 66123 Saarbrücken, Germany
    Joanna ZUR-PINSKA, Biotechnology Center, Silesian University of Technology, Krzywoustego 8, 44-122 Gliwice, Poland
    Zhaohang ZHANG, Computational Mechanical and Materials Engineering, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands
    Anastasiia KRUSHYNSKA, Computational Mechanical and Materials Engineering, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands
    Marleen KAMPERMAN, Polymer Science, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands

    topicB-02 Additive manufacturing
    person_pinMalgorzata WLODARCZYK-BIEGUN, Polymer Science, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands; Biotechnology Center, Silesian University of Technology, Krzywoustego 8, 44-122 Gliwice, Poland
    P42 - Additive manufacturing - Influence of laser power on the corrosion of an additively manufactured Mg-Y3.9wt%-Nd3.0wt%-Zr0.49wt% alloyAdditive manufacturingHanna NILSSON ÅHMAN, Swerim AB, Uppsala University
    Clarence WAHMAN, Uppsala University
    Pelle MELLIN, Swerim AB
    Cecilia PERSSON, Uppsala University

    topicB-02 Additive manufacturing
    person_pinHanna NILSSON ÅHMAN, Swerim AB, Uppsala University
    P44 - Additive manufacturing - Influence of TPMS-based Architecture of Hydroxyapatite Scaffolds on Osteoinduction and OsteoconductionAdditive manufacturingEkaterina MAEVSKAIA, University of Zurich, Center of Dental Medicine, Oral Biotechnology & Bioengineering, Zürich, Switzerland
    Julien GUERRERO, University of Zurich, Center of Dental Medicine, Oral Biotechnology & Bioengineering, Zürich, Switzerland
    Franz WEBER, University of Zurich, Center of Dental Medicine, Oral Biotechnology & Bioengineering, Zürich, Switzerland; CABMM, Center for Applied Biotechnology and Molecular Medicine, University of Zurich, Zurich, Switzerland

    topicB-02 Additive manufacturing
    person_pinEkaterina MAEVSKAIA, University of Zurich, Center of Dental Medicine, Oral Biotechnology & Bioengineering, Zürich, Switzerland
    P1 - Bioprinting and bioinks - Evaluating the use of synthetic self-assembling peptides to 3D bioprint in vitro cartilage tissue modelsBioprinting and bioinksPatricia SANTOS BEATO, Biochemical Engineering, University College London (UCL), London, UK
    Aline MILLER, Chemical Engineering, University of Manchester, Manchester, UK
    Andrew PITSILLIDES, Comparative Biomedical Sciences, The Royal Veterinary College, London, UK
    Ryo TORII, Mechanical Engineering, University College London (UCL), London, UK
    Deepak KALASKAR, Division of Surgery and Interventional Sciences, University College London (UCL), London, UK

    topicB-03 Bioprinting and bioinks
    person_pinPatricia SANTOS BEATO, Biochemical Engineering, University College London (UCL), London, UK
    P2 - Bioprinting and bioinks - Clickable Dynamic BioinksBioprinting and bioinksPierre TOURNIER, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Nathan LAGNEAU, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Boris HALGAND, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    François LOLL, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Jérôme GUICHEUX, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Catherine LE VISAGE, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    Vianney DELPLACE, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France

    topicB-03 Bioprinting and bioinks
    person_pinVianney DELPLACE, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France
    P3 - Bioprinting and bioinks - Development of optically-tuned bioresins for the rapid volumetric bioprinting of liver organoid-laden metabolic biofactoriesBioprinting and bioinksPaulina NÚÑEZ BERNAL, Department of Orthopedics, UMC Utrecht, Utrecht, the Netherlands
    Manon BOUWMEESTER, Department of Clinical Sciences, Faculty of Veterinary Medicine
    Jorge MADRID-WOLFF, Laboratory of Applied Photonics Devices, École Polytechnique Fédéral Lausanne (EPFL)
    Marc FALANDT, Department of Clinical Sciences, Faculty of Veterinary Medicine
    Sammy FLORCZAK, Department of Orthopaedics, University Medical Center Utrecht
    Núria GINÉS RODRIGUEZ, Department of Orthopaedics, University Medical Center Utrecht
    Yang LI, Department of Orthopaedics, University Medical Center Utrecht
    Gabriel GRÖßBACHER, Department of Orthopaedics, University Medical Center Utrecht
    Roos-Anne SAMSOM, Department of Clinical Sciences, Faculty of Veterinary Medicine
    Monique VAN WOLFEREN, Department of Clinical Sciences, Faculty of Veterinary Medicine
    Luc VAN DER LAAN, Department of Surgery, Erasmus MC-University Medical Center
    Paul DELROT, Readily3D SA
    Damien LOTERIE, Readily3D SA
    Jos MALDA, Department of Orthopaedics, University Medical Center Utrecht; Department of Clinical Sciences, Faculty of Veterinary Medicine
    Christophe MOSER, Laboratory of Applied Photonics Devices, École Polytechnique Fédéral Lausanne (EPFL)
    Bart SPEE, Department of Clinical Sciences, Faculty of Veterinary Medicine
    Riccardo LEVATO, Department of Clinical Sciences, Faculty of Veterinary Medicine; Department of Orthopaedics, University Medical Center Utrecht

    topicB-03 Bioprinting and bioinks
    person_pinMarc FALANDT, Department of Clinical Sciences, Faculty of Veterinary Medicine
    P4 - Bioprinting and bioinks - Development of modified nanocrystalline cellulose based bioinksBioprinting and bioinksClara M. GARCÍA SÁEZ, ICTP-CSIC
    Maria AREVALO NUÑEZ DE ARENAS, ICTP-CSIC
    Itciar GONZÁLEZ, ITEFI-CSIC
    FRANCISCO J PARRA RUIZ, ICTP-CSIC
    Luis M RODRIGUEZ-LORENZO, ICTP-CSIC

    topicB-03 Bioprinting and bioinks
    person_pinLuis M RODRIGUEZ-LORENZO, ICTP-CSIC
    P9 - Bioprinting and bioinks - GENERATION AND CHARACTERIZATION OF SCAFFOLDS FOR SPINAL CORD TISSUE ENGINEERING THROUGH 3D PRINTING TECHNOLOGYBioprinting and bioinksNoelia CAMPILLO, BRECA Health Care S.L
    Victor CARRIEL, University of Granada
    Sara MICO, REGEMAT 3D S.L.
    David SÁNCHEZ PORRAS, Universidad de Granada
    Baena JOSE MANUEL, REGEMAT 3D S.L.
    Óscar GARCÍA GARCÍA, Universidad de Granada
    Miguel ETAYO ESCANILLA, University of Granada and Instituto de Investigación Biosanitaria ibs.GRANADA

    topicB-03 Bioprinting and bioinks
    person_pinSara MICO, REGEMAT 3D S.L.
    P10 - Bioprinting and bioinks - Development Of Biomaterial Inks For The 3D Bioprinting Of Anisotropic Cardiac PatchesBioprinting and bioinksAurelia POERIO, Institut Jean Lamour - University of Lorraine
    Jean-Philippe JEHL, Institut Jean Lamour - University of Lorraine
    Mélanie LOVERA-LEROUX, Institut Jean Lamour - University of Lorraine
    Solenne FLEUTOT, Institut Jean Lamour - University of Lorraine
    João F. MANO, CICECO - Department of chemistry - University of Aveiro
    FRANCK CLEYMAND, Institut Jean Lamour - University of Lorraine

    topicB-03 Bioprinting and bioinks
    person_pinAurelia POERIO, Institut Jean Lamour - University of Lorraine
    P12 - Bioprinting and bioinks - Towards superior in vitro intestinal models exploiting gelatin-based biomaterial inksBioprinting and bioinksAnna SZABÓ, Polymer Chemistry and Biomaterials Group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Ágnes DOBOS, Polymer Chemistry and Biomaterials Group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Indi GEURS, Department of Food Technology, Safety and Health, Food Structure & Function Research Group, Ghent University, Coupure Links 653, Gent 9000, Belgium
    Koen DEWETTINCK, Department of Food Technology, Safety and Health, Food Structure & Function Research Group, Ghent University, Coupure Links 653, Gent 9000, Belgium
    Pedro COSTA, Biofabics Lda, Porto, Portugal
    Sandra VAN VLIERBERGHE, Polymer Chemistry and Biomaterials Group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium

    topicB-03 Bioprinting and bioinks
    person_pinAnna SZABÓ, Polymer Chemistry and Biomaterials Group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    P13 - Bioprinting and bioinks - Bioprinted Gellan gum/Kappa-carrageenan Scaffolds for Soft Tissue EngineeringBioprinting and bioinksKonstantinos LOUKELIS , University of Crete
    Varvara PLATANIA , University of Crete
    Nikos KOUTSOMARKOS , University of Crete
    Maria CHATZINIKOLAIDOU, Foundation for Research and Technology Hellas and University of Crete

    topicB-03 Bioprinting and bioinks
    person_pinMaria CHATZINIKOLAIDOU, Foundation for Research and Technology Hellas and University of Crete
    P14 - Bioprinting and bioinks - 3D bioprinted cross-linked gelatin-alginate hydrogel matrices for biomedical purposesBioprinting and bioinksAdam MIREK, 1.Institut Européen des Membranes, Montpellier, France 2.Nalecz Institute of Biocybernetics and Biomedical Engineering Polish Academy of Sciences Warsaw, Poland
    Habib BELAID, 1.Institut Européen des Membranes, Montpellier, France
    Vincent CAVAILLÈS, 3. Institut de Recherche en Cancérologie, Montpellier, France
    Mikhael BECHELANY, 1.Institut Européen des Membranes, Montpellier, France

    topicB-03 Bioprinting and bioinks
    person_pinHabib BELAID, 1.Institut Européen des Membranes, Montpellier, France
    P16 - Bioprinting and bioinks - Bottoms-Up Bio-printing of cellularized porous PLGA micro-scaffolds to enhance cell proliferation, viability and migration Bioprinting and bioinksAdrien ROUSSELLE, Inserm U1121; University of Strasbourg
    Dominique VAUTIER , Inserm U1121; University of Strasbourg
    Youri ARNTZ, Inserm U1121; University of Strasbourg

    topicB-03 Bioprinting and bioinks
    person_pinAdrien ROUSSELLE, Inserm U1121; University of Strasbourg
    P17 - Bioprinting and bioinks - In vivo application of silica-derived inks for bone tissue engineering: a 10-years systematic reviewBioprinting and bioinksNicolas TOUYA, INSERM U1026 BIOTIS

    topicB-03 Bioprinting and bioinks
    person_pinNicolas TOUYA, INSERM U1026 BIOTIS
    P18 - Bioprinting and bioinks - Engineering cell responsive extracellular matrix bioinks for bioprinting shape-morphing tissuesBioprinting and bioinksAnkita PRAMANICK, CÚRAM - Science Foundation Ireland Research Centre for Medical Devices
    Abhay PANDIT, CÚRAM - Science Foundation Ireland Research Centre for Medical Devices
    Andrew DALY, CÚRAM - Science Foundation Ireland Research Centre for Medical Devices, Biomedical Engineering- National University of Ireland Galway
    Amir ALSHARABASY, National University of Ireland Galway

    topicB-03 Bioprinting and bioinks
    person_pinAmir ALSHARABASY, National University of Ireland Galway
    P19 - Bioprinting and bioinks - A versatile 3D bioprinted pancreas tumor model for new anticancer drug development Bioprinting and bioinksClaire GODIER, Institut Jean Lamour (IJL) - UMR 7198 CNRS - Université de Lorraine
    Zakaria BAKA, Institut Jean Lamour (IJL) - UMR 7198 CNRS - Université de Lorraine
    Abhik MALLICK, Institut Jean Lamour (IJL) - UMR 7198 CNRS - Université de Lorraine
    Varvara GRIBOVA, CRBS - UMR 1121 INSERM - Unistra
    Éric GAFFET, Institut Jean Lamour (IJL) - UMR 7198 CNRS - Université de Lorraine
    Halima ALEM-MARCHAND, Institut Jean Lamour (IJL) - UMR 7198 CNRS - Université de Lorraine

    topicB-03 Bioprinting and bioinks
    person_pinClaire GODIER, Institut Jean Lamour (IJL) - UMR 7198 CNRS - Université de Lorraine
    P21 - Bioprinting and bioinks - Zwitterionic microgel bioink as a strategy to inhibit foreign body response to bioprinted implantsBioprinting and bioinksMaryam ASADIKORAYEM, ETH Zurich
    František SURMAN, ETH Zurich
    Patrick WEBER, ETH Zurich
    Marcy ZENOBI-WONG, ETH Zurich

    topicB-03 Bioprinting and bioinks
    person_pinMaryam ASADIKORAYEM, ETH Zurich
    P23 - Bioprinting and bioinks - 3D bioprinting of GelMA/hydroxyapatite bio-inks to engineer bone tissue models for the preclinical investigation of new prosthetic implantsBioprinting and bioinksGianluca CIARDELLI, Politecnico di Torino
    Rossella LAURANO, Politecnico di Torino
    Roberta PAPPALARDO, Politecnico di Torino
    Valeria CHIONO, Politecnico di Torino
    Monica BOFFITO, Politecnico di Torino

    topicB-03 Bioprinting and bioinks
    person_pinGianluca CIARDELLI, Politecnico di Torino
    P24 - Bioprinting and bioinks - Designing a blueprint for 3D bioprinting of vascular networks Bioprinting and bioinksNehar CELIKKIN, Institute of Physical Chemistry Polish Academy of Sciences
    Dario PRESUTTI, Institute of Physical Chemistry Polish Academy of Sciences
    Marco COSTANTINI, Institute of Physical Chemistry Polish Academy of Sciences

    topicB-03 Bioprinting and bioinks
    person_pinNehar CELIKKIN, Institute of Physical Chemistry Polish Academy of Sciences
    P25 - Bioprinting and bioinks - Printing cell spheroids using laser-assisted bioprintingBioprinting and bioinksCharles HANDSCHIN, Inserm, BioTis U1026, Université de Bordeaux, Bordeaux, France

    topicB-03 Bioprinting and bioinks
    person_pinCharles HANDSCHIN, Inserm, BioTis U1026, Université de Bordeaux, Bordeaux, France
    P26 - Bioprinting and bioinks - Hyaluronan-Collagen Composite Bioink for the Printing of Nucleus Pulposus-Like StructuresBioprinting and bioinksGregor MIKLOSIC, AO Research Institute Davos, ETH Zürich
    Stéphanie DE OLIVEIRA, Sorbonne Université
    Sébastien GRASTILLEUR, Université de Nantes
    Christophe HÉLARY, Sorbonne Université
    Stephen J. FERGUSON, ETH Zürich
    Matteo D'ESTE, AO Research Institute Davos

    topicB-03 Bioprinting and bioinks
    person_pinGregor MIKLOSIC, AO Research Institute Davos, ETH Zürich
    P27 - Bioprinting and bioinks - 3D Bioprinted Prevascularised Oral Soft Connective Tissue Substitutes for Gingival Tissue EngineeringBioprinting and bioinksRawen SMIRANI, Univ. Bordeaux, INSERM, Laboratoire Bioingénierie Tissulaire (BioTis), U1026, CHU Bordeaux
    Chantal MÉDINA, Univ. Bordeaux, INSERM, ART BioPrint, Laboratoire Bioingénierie Tissulaire (BioTis), U1026
    Hugo OLIVEIRA, Univ. Bordeaux, INSERM, ART BioPrint, Laboratoire Bioingénierie Tissulaire (BioTis), U1026
    Adrien NAVEAU, Univ. Bordeaux, INSERM, Laboratoire Bioingénierie Tissulaire (BioTis), U1026, CHU Bordeaux

    topicB-03 Bioprinting and bioinks
    person_pinRawen SMIRANI, Univ. Bordeaux, INSERM, Laboratoire Bioingénierie Tissulaire (BioTis), U1026, CHU Bordeaux
    P28 - Bioprinting and bioinks - CONCEPTION OF PHOTOPOLYMERISABLE, DEGRADABLE AND BIOACTIVE POLYMERIC INK FOR MENISCUS REGENERATIONBioprinting and bioinksMathilde MASSONIE, Polymers for Health and Biomaterials - IBMM - Univ Montpellier
    Coline PINESE, Polymers for Health and Biomaterials - IBMM - Univ Montpellier
    Benjamin NOTTELET, Polymers for Health and Biomaterials - IBMM - Univ Montpellier
    Matthieu SIMON, Bio-impression platform CARTIGEN, IRMB, CHU of Montpellier, Montpellier, France
    Gilles SUBRA, Department of Amino Acid, Peptides and Proteins, IBMM UMR 5810, University of Montpellier, CNRS, ENSCM, Montpellier, France
    Xavier GARRIC, Polymers for Health and Biomaterials - IBMM - Univ Montpellier

    topicB-03 Bioprinting and bioinks
    person_pinMathilde MASSONIE, Polymers for Health and Biomaterials - IBMM - Univ Montpellier
    P29 - Bioprinting and bioinks - Highly Concentrated Collagen for 3D Bioprinting of Stable StructuresBioprinting and bioinksMilena SAVIOLI LOPES, Cellink Bioprinting AB
    Josefin BLELL, Cellink Bioprinting AB
    Volodymyr KUZMENKO, Cellink Bioprinting AB
    Itedale NAMRO REDWAN, Cellink Bioprinting AB

    topicB-03 Bioprinting and bioinks
    person_pinMilena SAVIOLI LOPES, Cellink Bioprinting AB
    P31 - Bioprinting and bioinks - Newly Polydopamine Guanosine-derived supramolecular hydrogels to improve stability and viscosity properties in 3D printed scaffolds for soft tissue regeneration Bioprinting and bioinksMaria MERINO-GOMEZ, 1 Bioengineering Institute of Technology (BIT), Universitat Internacional de Catalunya (UIC), Sant Cugat del Vallès, Spain / 2 Basic Science Department, Faculty of Medicine and Health Sciences, Universitat Internacional de Catalunya (UIC), Sant Cugat del Vallès, Spain
    Maria GODOY-GALLARDO, 1 Bioengineering Institute of Technology (BIT), Universitat Internacional de Catalunya (UIC), Sant Cugat del Vallès, Spain / 2 Basic Science Department, Faculty of Medicine and Health Sciences, Universitat Internacional de Catalunya (UIC), Sant Cugat del Vallès, Spain
    Roman PEREZ-ANTOÑANZAS, 1 Bioengineering Institute of Technology (BIT), Universitat Internacional de Catalunya (UIC), Sant Cugat del Vallès, Spain / 2 Basic Science Department, Faculty of Medicine and Health Sciences, Universitat Internacional de Catalunya (UIC), Sant Cugat del Vallès, Spain

    topicB-03 Bioprinting and bioinks
    person_pinMaria MERINO-GOMEZ, 1 Bioengineering Institute of Technology (BIT), Universitat Internacional de Catalunya (UIC), Sant Cugat del Vallès, Spain / 2 Basic Science Department, Faculty of Medicine and Health Sciences, Universitat Internacional de Catalunya (UIC), Sant Cugat del Vallès, Spain
    P32 - Bioprinting and bioinks - Production of Cartilaginous Substitutes using 3D Bioprinting and Development of Innovative Adapted BioinksBioprinting and bioinksOcéane MESSAOUDI, UMR7365 CNRS-UL IMoPA
    Christel HENRIONNET, UMR7365 CNRS-UL IMoPA
    Laurent GROSSIN, UMR7365 CNRS-UL IMoPA
    Pierre GILLET, UMR7365 CNRS-UL IMoPA
    Didier MAINARD, UMR7365 CNRS-UL IMoPA
    Laurent GALOIS, UMR7365 CNRS-UL IMoPA
    Damien LOEUILLE, UMR7365 CNRS-UL IMoPA
    Christophe MARQUETTE, UMR7365 CNRS-UL IMoPA
    Astrid PINZANO, UMR7365 CNRS-UL IMoPA

    topicB-03 Bioprinting and bioinks
    person_pinAstrid PINZANO, UMR7365 CNRS-UL IMoPA
    P33 - Bioprinting and bioinks - Production of multifunctional wound dressings by using newly developed antibacterial, antioxidant, and anti-inflammatory biomaterial ink for wound healing applications Bioprinting and bioinksIrem UNALAN, Institute of Biomaterials, Friedrich-Alexander-Universität Erlangen-Nürnberg, 91058 Erlangen, Germany
    Aldo R. BOCCACCINI, Institute of Biomaterials, Friedrich-Alexander-Universität Erlangen-Nürnberg, 91058 Erlangen, Germany

    topicB-03 Bioprinting and bioinks
    person_pinIrem UNALAN, Institute of Biomaterials, Friedrich-Alexander-Universität Erlangen-Nürnberg, 91058 Erlangen, Germany
    P35 - Bioprinting and bioinks - How structural microheterogeneities control bioink macroelasticity, printing quality and cell viabilityBioprinting and bioinksBruna Regina MACIEL, Institute of Mechanical Process Engineering and Mechanics, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
    Alisa GRIMM, Institute of Functional Interfaces, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
    Sonja HAASE, Institute of Functional Interfaces, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
    Xenia KEMPTER, Institute of Functional Interfaces, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
    Ute SCHEPERS, Institute of Functional Interfaces, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
    Claude OELSCHLAEGER, Institute of Mechanical Process Engineering and Mechanics, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
    Norbert WILLENBACHER, Institute of Mechanical Process Engineering and Mechanics, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany

    topicB-03 Bioprinting and bioinks
    person_pinBruna Regina MACIEL, Institute of Mechanical Process Engineering and Mechanics, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
    P36 - Bioprinting and bioinks - Aqueous Two-Phase Enabled Low Viscosity 3D (LoV3D) Bioprinting of Living MatterBioprinting and bioinksMalin Lea BECKER, Leijten Lab, Dept. of Developmental BioEngineering, TechMed Centre, University of Twente, Enschede, The Netherlands
    Jeroen LEIJTEN, Leijten Lab, Dept. of Developmental BioEngineering, TechMed Centre, University of Twente, Enschede, The Netherlands

    topicB-03 Bioprinting and bioinks
    person_pinMalin Lea BECKER, Leijten Lab, Dept. of Developmental BioEngineering, TechMed Centre, University of Twente, Enschede, The Netherlands
    P37 - Bioprinting and bioinks - In vitro and in vivo characterization of a novel tricalcium silicate-based ink for bone regeneration using Laser-Assisted BioprintingBioprinting and bioinksNicolas TOUYA, INSERM U1026 BIOTIS

    topicB-03 Bioprinting and bioinks
    person_pinNicolas TOUYA, INSERM U1026 BIOTIS
    P38 - Bioprinting and bioinks - Eliminating the Trade-Off between Printability and Biomimicry in 3D BioprintingBioprinting and bioinksRachel IRLAM, Chemistry, Newcastle University, Newcastle-Upon-Tyne, UK
    Gema DURA, Departamento de Química Inorgánica, UCLM, Spain
    Jeremy LAKEY, Biosciences Institute, Newcastle University, Newcastle-Upon-Tyne, UK
    Helen WALLER, Biosciences Institute, Newcastle University, Newcastle-Upon-Tyne, UK
    Ana Marina FERREIRA, School of Engineering, Newcastle University, Newcastle-Upon-Tyne, UK
    David FULTON, Chemistry, Newcastle University, Newcastle-Upon-Tyne, UK

    topicB-03 Bioprinting and bioinks
    person_pinRachel IRLAM, Chemistry, Newcastle University, Newcastle-Upon-Tyne, UK
    P1 - Synthesis and processing - Synthesis of aligned hollow polymeric microfibers by coaxial electrospinning for the development of 3D in vitro models in perfusion bioreactorsSynthesis and processing techniquesMarián MANTECÓN-ORIA, Departamento de Ingenierias Química y Biomolecular, Universidad de Cantabria, Santander, Spain
    María J. RIVERO, Departamento de Ingenierias Química y Biomolecular, Universidad de Cantabria, Santander, Spain
    Olga TAPIA, Universidad Europea del Atlántico (UNEATLANTICO), Santander, Spain
    Ane URTIAGA, Departamento de Ingenierias Química y Biomolecular, Universidad de Cantabria, Santander, Spain
    Nazely DIBAN, Departamento de Ingenierias Química y Biomolecular, Universidad de Cantabria, Santander, Spain

    topicB-04 Other synthesis and processing techniques (freeze-casting, electrospinning, plasma-based processing...)
    person_pinNazely DIBAN, Departamento de Ingenierias Química y Biomolecular, Universidad de Cantabria, Santander, Spain
    P2 - Synthesis and processing - 3D membrane of electrospun fibers for cell cultureSynthesis and processing techniquesBénédicte FROMAGER, Institut Européen des Membranes, Univ Montpellier, ENSCM, CNRS, Montpellier, FRANCE

    topicB-04 Other synthesis and processing techniques (freeze-casting, electrospinning, plasma-based processing...)
    person_pinBénédicte FROMAGER, Institut Européen des Membranes, Univ Montpellier, ENSCM, CNRS, Montpellier, FRANCE
    P4 - Synthesis and processing - Microstructured Electrospun Scaffold Composed of PVA And Marine Biopolymers and Its Effect on Muscle CellsSynthesis and processing techniquesDragica BEZJAK, 1 Centro de Biotecnología, Universidad Técnica Federico Santa María, Valparaíso, Chile
    Nicole ORELLANA, 1 Centro de Biotecnología, Universidad Técnica Federico Santa María, Valparaíso, Chile
    Cristian ACEVEDO, 1 Centro de Biotecnología, Universidad Técnica Federico Santa María, Valparaíso, Chile. 2 Departamento de Física, Universidad Técnica Federico Santa María, Valparíso, Chile. dragica.bezjak@usm.cl
    Tomás CORRALES, 2 Departamento de Física, Universidad Técnica Federico Santa María, Valparíso, Chile. dragica.bezjak@usm.cl

    topicB-04 Other synthesis and processing techniques (freeze-casting, electrospinning, plasma-based processing...)
    person_pinDragica BEZJAK, 1 Centro de Biotecnología, Universidad Técnica Federico Santa María, Valparaíso, Chile
    P5 - Synthesis and processing - Surface topography and roughness analysis of the laser-treated powder metallurgy prepared Ti-graphite composite for application in dental implantologySynthesis and processing techniquesPeter ŠUGÁR, Institute of Production Technologies, Faculty of Materials Science and Technology, Slovak University of Technology, Trnava, Slovakia
    Richard ANTALA, Institute of Production Technologies, Faculty of Materials Science and Technology, Slovak University of Technology, Trnava, Slovakia
    Jana ŠUGÁROVÁ, Institute of Production Technologies, Faculty of Materials Science and Technology, Slovak University of Technology, Trnava, Slovakia
    Jaroslav KOVÁ?IK, Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovakia

    topicB-04 Other synthesis and processing techniques (freeze-casting, electrospinning, plasma-based processing...)
    person_pinRichard ANTALA, Institute of Production Technologies, Faculty of Materials Science and Technology, Slovak University of Technology, Trnava, Slovakia
    P7 - Synthesis and processing - Tubular Constructs as Small Diameter Vascular Grafts and Tissue ModelsSynthesis and processing techniquesMichael BARTOLF-KOPP, Department for Functional Materials in Medicine and Dentistry, University of Würzburg
    Alessandro CIANCIOSI, Department for Functional Materials in Medicine and Dentistry, University of Würzburg
    Csaba GERGELY, Department for Functional Materials in Medicine and Dentistry, University of Würzburg
    Tomasz JÜNGST, Department for Functional Materials in Medicine and Dentistry, University of Würzburg

    topicB-04 Other synthesis and processing techniques (freeze-casting, electrospinning, plasma-based processing...)
    person_pinTomasz JÜNGST, Department for Functional Materials in Medicine and Dentistry, University of Würzburg
    P8 - Synthesis and processing - Ultrafiltration impact in the enzymatic activity of lysozymeSynthesis and processing techniquesAriane DE ESPINDOLA, Institut de Science des Matériaux de Mulhouse, Université de Haute-Alsace
    Patrick DUTOURNIÉ, Institut de Science des Matériaux de Mulhouse, Université de Haute-Alsace
    Arnaud PONCHE, Institut de Science des Matériaux de Mulhouse, Université de Haute-Alsace

    topicB-04 Other synthesis and processing techniques (freeze-casting, electrospinning, plasma-based processing...)
    person_pinAriane DE ESPINDOLA, Institut de Science des Matériaux de Mulhouse, Université de Haute-Alsace
    P9 - Synthesis and processing - Electrospun PCL coated with Collagen/Hydroxyapatite for Bone Tissue EngineeringSynthesis and processing techniquesMoresche BARTLEY, Student
    Karin HING, PhD supervisor
    Elizabeth TANNER, PhD supervisor

    topicB-04 Other synthesis and processing techniques (freeze-casting, electrospinning, plasma-based processing...)
    person_pinElizabeth TANNER, PhD supervisor
    P10 - Synthesis and processing - Melt electrowriting of an organic-inorganic hybrid doped with a natural plasticizer agentSynthesis and processing techniquesNafise ELAHPOUR, PhD student
    Cédric BOSSARD, Post doctrol researcher
    Nora ABDELLAOUI, assistant professor
    Edouard JALLOT, full professor
    Jonathan LAO, associate professor

    topicB-04 Other synthesis and processing techniques (freeze-casting, electrospinning, plasma-based processing...)
    person_pinNafise ELAHPOUR, PhD student
    P11 - Synthesis and processing - Electrospun Thermally Treated PVA/Gellan Gum Membranes for Bone Tissue EngineeringSynthesis and processing techniquesKonstantinos LOUKELIS , University of Crete
    Danai PAPADOGIANNI , University of Crete
    Maria CHATZINIKOLAIDOU, Foundation for Research and Technology Hellas and University of Crete

    topicB-04 Other synthesis and processing techniques (freeze-casting, electrospinning, plasma-based processing...)
    person_pinMaria CHATZINIKOLAIDOU, Foundation for Research and Technology Hellas and University of Crete
    P13 - Synthesis and processing - Processing of fast-gelling hydrogel precursors in microfluidics by electrocoalescence of reactive speciesSynthesis and processing techniquesTalika Alina NEUENDORF, Leibniz Institute of Polymer Research Dresden
    Nicolas HAUCK, Leibniz Institute of Polymer Research Dresden
    Max Julius MÄNNEL, Leibniz Institute of Polymer Research Dresden
    Lucas VOGEL, Leibniz Institute of Polymer Research Dresden
    Ping LIU, B CUBE Center for Molecular Bioengineering, Technische Universität Dresden
    Enno STÜNDEL, Leibniz Institute of Polymer Research Dresden
    Yixin ZHANG, B CUBE Center for Molecular Bioengineering, Technische Universität Dresden
    Julian THIELE, Leibniz Institute of Polymer Research Dresden

    topicB-04 Other synthesis and processing techniques (freeze-casting, electrospinning, plasma-based processing...)
    person_pinTalika Alina NEUENDORF, Leibniz Institute of Polymer Research Dresden
    P1 - Drug delivery - Peptide Mediation of Nanoparticles To Cross The Blood-Brain Barrier – A Platform For Brain Drug DeliveryDrug deliveryCatarina CHAPARRO, CENIMAT/i3N (Centro de Investigação em Materiais), NOVA School of Science and Technology (FCT-NOVA), Almada, Portugal; Instituto de Medicina Molecular, Faculdade de Medicina da Universidade de Lisboa, Lisboa, Portugal
    Marco CAVACO, Instituto de Medicina Molecular, Faculdade de Medicina da Universidade de Lisboa
    Miguel CASTANHO, Instituto de Medicina Molecular, Faculdade de Medicina da Universidade de Lisboa
    João Paulo BORGES, CENIMAT/i3N (Centro de Investigação em Materiais), NOVA School of Science and Technology (FCT-NOVA)
    Vera NEVES, Instituto de Medicina Molecular, Faculdade de Medicina da Universidade de Lisboa
    Paula I. P. SOARES, CENIMAT/i3N (Centro de Investigação em Materiais), NOVA School of Science and Technology (FCT-NOVA)

    topicC-03 Drug delivery
    person_pinCatarina CHAPARRO, CENIMAT/i3N (Centro de Investigação em Materiais), NOVA School of Science and Technology (FCT-NOVA), Almada, Portugal; Instituto de Medicina Molecular, Faculdade de Medicina da Universidade de Lisboa, Lisboa, Portugal
    P2 - Drug delivery - Milk-Derived Extracellular Vesicles for siRNA Delivery into Intestine Mimicking Caco-2 CellsDrug deliveryJosepha ROERIG, Pharmaceutical Technology, Medical Faculty, Leipzig University, Germany
    Franziska MITRACH, Pharmaceutical Technology, Medical Faculty, Leipzig University, Germany
    Maximilian SCHMID, Institute of Pharmaceutics and Biopharmaceutics, Heinrich-Heine-University Duesseldorf, Germany
    Michael C. HACKER, Institute of Pharmaceutics and Biopharmaceutics, Heinrich-Heine-University Duesseldorf, Germany
    Christian WÖLK, Pharmaceutical Technology, Medical Faculty, Leipzig University, Germany
    Michaela SCHULZ-SIEGMUND, Pharmaceutical Technology, Medical Faculty, Leipzig University, Germany

    topicC-03 Drug delivery
    person_pinJosepha ROERIG, Pharmaceutical Technology, Medical Faculty, Leipzig University, Germany
    P3 - Drug delivery - Influence of the structure of regioselectively oxidized polysaccharides on the anticancer-drug deliveryDrug deliveryLukáš MÜNSTER, Centre of Polymer Systems, Tomas Bata University in Zlín, Zlín, Czech Republic
    Zdenka CAPÁKOVÁ, Centre of Polymer Systems, Tomas Bata University in Zlín, Zlín, Czech Republic
    Ivo KU?ITKA, Centre of Polymer Systems, Tomas Bata University in Zlín, Zlín, Czech Republic
    Jan VÍCHA, Centre of Polymer Systems, Tomas Bata University in Zlín, Zlín, Czech Republic

    topicC-03 Drug delivery
    person_pinLukáš MÜNSTER, Centre of Polymer Systems, Tomas Bata University in Zlín, Zlín, Czech Republic
    P4 - Drug delivery - Self-assembling amphiphilic cyclodextrin-based nano-sized delivery systems for hydrophobic drugsDrug deliverySarah VOGEL-KINDGEN, Goethe-University Frankfurt
    Felix BRETTNER, Goethe-University Frankfurt
    Maike WINDBERGS, Goethe-University Frankfurt

    topicC-03 Drug delivery
    person_pinSarah VOGEL-KINDGEN, Goethe-University Frankfurt
    P5 - Drug delivery - Design of a biodegradable bone cement for the treatment of bone fractures induced by breast cancer metastasesDrug deliveryOrlane JOUANNEAU, IEM
    Marilyn KAJDAN, IRCM
    Carole BAROU, IEM, IRCM
    Vincent CAVAILLÈS, IRCM
    Mikhael BECHELANY, IEM

    topicC-03 Drug delivery
    person_pinOrlane JOUANNEAU, IEM
    P6 - Drug delivery - Localization of Oral Device Solid Tablet Deposition in Canine and Human Gastric Ex Vivo TissuesDrug deliveryKristina RIVERA, Novo Nordisk A/S
    Maria PEREVERZINA, Novo Nordisk A/S
    Mette POULSEN, Novo Nordisk A/S
    Lise Lotte GLUUD, Hvidovre Hospital, 2650 Hvidovre, Denmark
    Drago STICKER, Novo Nordisk A/S
    Stephen BUCKLEY, Novo Nordisk A/S

    topicC-03 Drug delivery
    person_pinKristina RIVERA, Novo Nordisk A/S
    P7 - Drug delivery - Luminescent Silica Nanoparticles for Monitoring Drug DeliveryDrug deliveryGrace BALL, University of Birmingham
    Menisha MANHOTA, University of Birmingham
    Asier MUGURUZA, University of Birmingham
    Maria ODYNIEC, University of Birmingham
    Sarah KEUHNE, University of Birmingham
    Damien WALMSLEY, University of Birmingham
    Zoe PIKRAMENOU, University of Birmingham

    topicC-03 Drug delivery
    person_pinGrace BALL, University of Birmingham
    P8 - Drug delivery - In vitro study of poly(lactic acid) block copolymers with poly(hexylene succinate) as microparticles for long-acting injectables of risperidone drugDrug deliveryIouliana CHRYSAFI, Department of Physics, Aristotle University of Thessaloniki, Thessaloniki, Greece
    Stavroula NANAKI, Department of Chemistry, Aristotle University of Thessaloniki, Thessaloniki, Greece
    Eleni PAVLIDOU , Department of Physics, Aristotle University of Thessaloniki, Thessaloniki, Greece
    Dimitrios N. BIKIARIS, Department of Chemistry, Aristotle University of Thessaloniki, Thessaloniki, Greece

    topicC-03 Drug delivery
    person_pinIouliana CHRYSAFI, Department of Physics, Aristotle University of Thessaloniki, Thessaloniki, Greece
    P9 - Drug delivery - Silk fibroin based dexamethasone and cannabidiol delivery systems Drug deliveryAndra GRAVA, RTU Rudolfs Cimdins Riga Biomaterials Innovation and Development Centre, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia
    Arita DUBNIKA, RTU Rudolfs Cimdins Riga Biomaterials Innovation and Development Centre, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia

    topicC-03 Drug delivery
    person_pinAndra GRAVA, RTU Rudolfs Cimdins Riga Biomaterials Innovation and Development Centre, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia
    P10 - Drug delivery - Hypoxia-mimicking fibrin matrix via factor XIII catalyzed transpeptidation of deferoxamine - a clinically translatable strategy for augmenting fracture healingDrug deliveryNorein NOREIN, Department of Chemistry – Ångström Laboratory, Macromolecular Chemistry, Uppsala University
    Samanta AYAN, Department of Chemistry – Ångström Laboratory, Macromolecular Chemistry, Uppsala University
    Jöns HILBORN, Department of Chemistry – Ångström Laboratory, Macromolecular Chemistry, Uppsala University

    topicDrug Delivery (C-03)
    person_pinNorein NOREIN, Department of Chemistry – Ångström Laboratory, Macromolecular Chemistry, Uppsala University
    P11 - Drug delivery - Nanodelivery of Urocortin-1 as a Chondroprotective Agent against Post-Traumatic OsteoarthritisDrug deliveryZara SMITH, University of Manchester
    Annalisa TIRELLA, University of Trento
    Paul TOWNSEND, University of Surrey
    Stephen RICHARDSON, University of Manchester

    topicC-03 Drug delivery
    person_pinAnnalisa TIRELLA, University of Trento
    P12 - Drug delivery - RGD-Integrin Interactions as a Facile Approach to Tether Ligands onto the Surface of Extracellular Vesicles for Targeted Drug Delivery ApplicationsDrug deliveryAntoine KAROICHAN, Faculty of Dental Medicine and Oral Health Sciences, McGill University, Montreal, QC, Canada
    Maryam TABRIZIAN, Faculty of Dental Medicine and Oral Health Sciences, McGill University, Montreal, QC, Canada; Department of Biomedical Engineering, McGill University, Montreal, QC, Canada

    topicC-03 Drug delivery
    person_pinAntoine KAROICHAN, Faculty of Dental Medicine and Oral Health Sciences, McGill University, Montreal, QC, Canada
    P13 - Drug delivery - Ferrostatin-Nanotherapeutic Materials for Neurodegeneration ApplicationsDrug deliveryJoshua MORROW, Monash University
    Zihnil MAZRAD, Monash University
    Ashley BUSH, Head of Oxidation Biology Unit, Neurodegeneration Division, Florey Institute of Neuroscience and Mental Health; Professor of Neuroscience, University of Melbourne.
    Kristian KEMPE, Monash University

    topicC-03 Drug delivery
    person_pinJoshua MORROW, Monash University
    P14 - Drug delivery - The bacterium Magnetospirillum gryphiswaldense improves the accumulation of surface-adsorbed nanoparticles into the core of 3D cancer modelsDrug deliveryRadu Alexandru PAUN, Department of Biomedical Engineering and Research Institute of the McGill University Health Centre, McGill University, Montreal, Canada
    Reza RASOULI, Department of Biomedical Engineering, McGill University, Montreal, Canada
    Daciana Catalina DUMUT, Department of Medicine and Research Institute of the McGill University Health Centre, McGill University, Montreal, Canada
    Danuta RADZIOCH, Department of Medicine, Department of Human Genetics, and Research Institute of the McGill University Health Centre, McGill University, Montreal, Canada
    Maryam TABRIZIAN, Department of Biomedical Engineering and Faculty of Dentistry and Oral Health Sciences, McGill University, Montreal, Canada

    topicC-03 Drug delivery
    person_pinRadu Alexandru PAUN, Department of Biomedical Engineering and Research Institute of the McGill University Health Centre, McGill University, Montreal, Canada
    P15 - Drug delivery - Trehalose-based Nucleolipids as nanocarriers for autophagy modulation: an in vitro studyDrug deliveryAnthony CUNHA, Univ. Bordeaux, INSERM U1212, CNRS UMR 5320, ARNA, ARN: Régulations Naturelle et Artificielle, ChemBioPharm, 146 rue Léo Saignat, 33076 Bordeaux CEDEX, France
    Alexandra GAUBERT, Univ. Bordeaux, INSERM U1212, CNRS UMR 5320, ARNA, ARN: Régulations Naturelle et Artificielle, ChemBioPharm, 146 rue Léo Saignat, 33076 Bordeaux CEDEX, France
    Julien VERGET, Univ. Bordeaux, INSERM U1212, CNRS UMR 5320, ARNA, ARN: Régulations Naturelle et Artificielle, ChemBioPharm, 146 rue Léo Saignat, 33076 Bordeaux CEDEX, France
    Marie-Laure THIOLAT, Univ. Bordeaux, CNRS, IMN, UMR 5293, F-33000 Bordeaux, France
    Philippe BARTHÉLÉMY, Univ. Bordeaux, INSERM U1212, CNRS UMR 5320, ARNA, ARN: Régulations Naturelle et Artificielle, ChemBioPharm, 146 rue Léo Saignat, 33076 Bordeaux CEDEX, France
    Laurent LATXAGUE, Univ. Bordeaux, INSERM U1212, CNRS UMR 5320, ARNA, ARN: Régulations Naturelle et Artificielle, ChemBioPharm, 146 rue Léo Saignat, 33076 Bordeaux CEDEX, France
    Benjamin DEHAY, Univ. Bordeaux, CNRS, IMN, UMR 5293, F-33000 Bordeaux, France

    topicC-03 Drug delivery
    person_pinAnthony CUNHA, Univ. Bordeaux, INSERM U1212, CNRS UMR 5320, ARNA, ARN: Régulations Naturelle et Artificielle, ChemBioPharm, 146 rue Léo Saignat, 33076 Bordeaux CEDEX, France
    P16 - Drug delivery - Preliminary toxicology studies of polyoxazolines intended for cancel imuno-theraphyDrug deliveryBianca PALADE, Cantacuzino National Medico-Military Institute for Research and Development, Bucharest, Romania
    Valentin VASILE, Cantacuzino National Medico-Military Institute for Research and Development, Bucharest, Romania
    Constantin Vlad TOFAN, Cantacuzino National Medico-Military Institute for Research and Development, Bucharest, Romania
    Catalin TUCUREANU, Cantacuzino National Medico-Military Institute for Research and Development, Bucharest, Romania
    Emilian GHIBU, Centre of Organic Chemistry “C.D. Nenitescu”, Romanian Academy, Bucharest, Romania
    Nicoleta Doriana BANU, Centre of Organic Chemistry “C.D. Nenitescu”, Romanian Academy, Bucharest, Romania
    Florica Adriana Jerca JERCA, Centre of Organic Chemistry “C.D. Nenitescu”, Romanian Academy, Bucharest, Romania
    Iuliana CARAS, Cantacuzino National Medico-Military Institute for Research and Development, Bucharest, Romania
    Aurora SALAGEANU, Cantacuzino National Medico-Military Institute for Research and Development, Bucharest, Romania
    Valentin Victor JERCA, Centre of Organic Chemistry “C.D. Nenitescu”, Romanian Academy, Bucharest, Romania
    Elena-Diana GIOL, Cantacuzino National Medico-Military Institute for Research and Development, Bucharest, Romania

    topicC-03 Drug delivery
    person_pinElena-Diana GIOL, Cantacuzino National Medico-Military Institute for Research and Development, Bucharest, Romania
    P17 - Drug delivery - Ice-templated Hierarchically Porous 3D Silica Nanoparticle Assemblies for Controlled Drug DeliveryDrug deliverySANDEEP KUMAR PALVAI, School of Physics and Astronomy, University of Leeds
    George NEWHAM, School of Physics and Astronomy, University of Leeds
    Ryan K MATHEW, Leeds Institute of Medical Research at St. James’s, School of Medicine, University of Leeds and Department of Neurosurgery, Leeds General Infirmary, Leeds Teaching Hospitals NHS Trust
    Heiko WURDAK, Leeds Institute of Medical Research at St. James’s, School of Medicine, University of Leeds
    Stephen D EVANS, School of Physics and Astronomy, University of Leeds
    Zhan Yuin ONG, School of Physics and Astronomy, University of Leeds

    topicC-03 Drug delivery
    person_pinSANDEEP KUMAR PALVAI, School of Physics and Astronomy, University of Leeds
    P19 - Drug delivery - Albupad project: Protein based biomaterials for the delivery of anti-tumoral active ingredientsDrug deliveryJordan BEURTON, Laboratory of Design and Application of Bioactive Molecules (CAMB) – Biovectorisation - UMR 7199, University of Strasbourg, France
    Eya ALOUI, Laboratory of Design and Application of Bioactive Molecules (CAMB) – Biovectorisation - UMR 7199, University of Strasbourg, France
    Philippe LAVALLE , Biomaterials and BioEngineering - Inserm UMR_S 1121, University of Strasbourg, France
    Benoît FRISCH, Laboratory of Design and Application of Bioactive Molecules (CAMB) – Biovectorisation - UMR 7199, University of Strasbourg, France

    topicC-03 Drug delivery
    person_pinJordan BEURTON, Laboratory of Design and Application of Bioactive Molecules (CAMB) – Biovectorisation - UMR 7199, University of Strasbourg, France
    P20 - Drug delivery - Gelatin-coated microneedles as advanced corticosteroid delivery systems towards a painless treatment for hypertrophic scarsDrug deliveryAnna SZABÓ, Polymer Chemistry and Biomaterials Group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    Ignace DE DECKER, Ghent University Hospital Burn Center - Department of Plastic, Aesthetic and Reconstructive surgery
    Stan MONSTREY, Ghent University Hospital Burn Center - Department of Plastic, Aesthetic and Reconstructive surgery
    Karel CLAES, Ghent University Hospital Burn Center - Department of Plastic, Aesthetic and Reconstructive surgery
    Philip BLONDEEL, Ghent University Hospital Burn Center - Department of Plastic, Aesthetic and Reconstructive surgery
    Sandra VAN VLIERBERGHE, Polymer Chemistry and Biomaterials Group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium

    topicC-03 Drug delivery
    person_pinAnna SZABÓ, Polymer Chemistry and Biomaterials Group, Centre of Macromolecular Chemistry (CMaC), Department of Organic and Macromolecular Chemistry, Ghent University, Ghent, Belgium
    P21 - Drug delivery - Hyaluronic acid based multifunctional nanostructured devices in cancer therapyDrug deliveryMario DI GENNARO, Department of Environmental, Biological and Pharmaceutical Sciences and Technologies (DiSTABiF), University of Campania “L. Vanvitelli”, Institute of Polymers, Composites and Biomaterials, National Research Council, (IPCB-CNR)
    Antonio FABOZZI, Altergon Italia s.r.l, Zona Industriale ASI, Morra De Sanctis (AV), 83040 Italy
    Francesca DELLA SALA , Institute of Polymers, Composites and Biomaterials, National Research Council, (IPCB-CNR)
    Gennaro LONGOBARDO , Department of Chemical, Materials and Production Engineering, University of Naples “Federico II”
    Luigi AMBROSIO, Institute of Polymers, Composites and Biomaterials, National Research Council, (IPCB-CNR)
    Assunta BORZACCHIELLO, Institute of Polymers, Composites and Biomaterials, National Research Council, (IPCB-CNR)

    topicC-03 Drug delivery
    person_pinAssunta BORZACCHIELLO, Institute of Polymers, Composites and Biomaterials, National Research Council, (IPCB-CNR)
    P22 - Drug delivery - Microfluidic-Assisted Nanoprecipitation of Hyaluronic Acid Core-Shell Nanoparticles for Cancer TherapyDrug deliveryAntonio FABOZZI, Altergon Italia S.r.l., Morra De Sanctis (AV), Italy
    Francesca DELLA SALA, National Research Council, Institute for Polymers, Composites and Biomaterials, Naples, Italy.
    Marco BARRETTA, National Research Council, Institute for Polymers, Composites and Biomaterials, Naples, Italy
    Mario DI GENNARO, National Research Council, Institute for Polymers, Composites and Biomaterials, Naples, Italy.
    Nicola SOLIMANDO, Altergon Italia S.r.l., Morra De Sanctis (AV), Italy
    Maurizio PAGLIUCA, Altergon Italia S.r.l., Morra De Sanctis (AV), Italy
    luigi AMBROSIO, National Research Council, Institute for Polymers, Composites and Biomaterials, Naples, Italy.
    Assunta BORZACCHIELLO, National Research Council, Institute for Polymers, Composites and Biomaterials, Naples, Italy.

    topicC-03 Drug delivery
    person_pinAssunta BORZACCHIELLO, National Research Council, Institute for Polymers, Composites and Biomaterials, Naples, Italy.
    P23 - Drug delivery - Amphiphilic Anionic Oligomer-Stabilized Calcium Phosphate Nanoparticles for siRNA Delivery via Convection-Enhanced DeliveryDrug deliveryFranziska MITRACH, Pharmaceutical Technology, Institute of Pharmacy, Medical Faculty, Leipzig University, Germany
    Maximilian SCHMID, Pharmaceutical Technology, Institute of Pharmacy, Medical Faculty, Leipzig University, Germany
    Heike FRANKE, Rudolf-Boehm-Institute for Pharmacology & Toxicology, Medical Faculty, Leipzig University, Germany
    Alexander EWE, Rudolf-Boehm-Institute for Pharmacology & Toxicology, Clinical Pharmacology, Medical Faculty, Leipzig University, Germany
    Achim AIGNER, Rudolf-Boehm-Institute for Pharmacology & Toxicology, Clinical Pharmacology, Medical Faculty, Leipzig University, Germany
    Christian WÖLK, Pharmaceutical Technology, Institute of Pharmacy, Medical Faculty, Leipzig University, Germany
    Michael C. HACKER, Institute of Pharmaceutics and Biopharmaceutics, Heinrich-Heine-University Düsseldorf, Germany
    Michaela SCHULZ-SIEGMUND, Pharmaceutical Technology, Institute of Pharmacy, Medical Faculty, Leipzig University, Germany

    topicC-03 Drug delivery
    person_pinFranziska MITRACH, Pharmaceutical Technology, Institute of Pharmacy, Medical Faculty, Leipzig University, Germany
    P24 - Drug delivery - Electrospun Materials for Local Delivery of Docetaxel and Cabazitaxel Intended for Urooncology Drug deliveryJoanna JAWORSKA, Centre of Polymer and Carbon Materials, Polish Academy of Sciences, Zabrze, Poland
    Mateusz STOJKO, Centre of Polymer and Carbon Materials, Polish Academy of Sciences, Zabrze, Poland
    Jakub WLODARCZYK, Centre of Polymer and Carbon Materials, Polish Academy of Sciences, Zabrze, Poland
    Monika MUSIAL-KULIK, Centre of Polymer and Carbon Materials, Polish Academy of Sciences, Zabrze, Poland
    Janusz SZEWCZENKO, Department of Biomaterials and Medical Device Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    Janusz KASPERCZYK, Centre of Polymer and Carbon Materials, Polish Academy of Sciences, Zabrze, Poland

    topicC-03 Drug delivery
    person_pinJanusz SZEWCZENKO, Department of Biomaterials and Medical Device Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    P25 - Drug delivery - Everolimus Loaded Polyethylene Oxide Films as a Potential Drug Delivery System for Drug-Eluting BalloonsDrug deliverymohammad AKRAMI-HASAN-KOHAL, ICGM, Univ Montpellier, CNRS, ENSCM, Montpellier, France
    Tahmer SHARKAWI, ICGM, Univ Montpellier, CNRS, ENSCM, Montpellier, France

    topicC-03 Drug delivery
    person_pinmohammad AKRAMI-HASAN-KOHAL, ICGM, Univ Montpellier, CNRS, ENSCM, Montpellier, France
    P26 - Drug delivery - Development of degradable self-rolled patches for drug releaseDrug deliverySidzigui OUEDRAOGO, UMR 7361/UHA, Institut de Science des Matériaux de Mulhouse (IS2M), Mulhouse, France
    Mathilde GROSJEAN, UMR 5247, Institut des Biomolécules Max Mousseron (IBMM), Montpelier, France
    Arnaud PONCHE , UMR 7361/UHA, Institut de Science des Matériaux de Mulhouse (IS2M), Mulhouse, France
    Laurent PIEUCHOT , UMR 7361/UHA, Institut de Science des Matériaux de Mulhouse (IS2M), Mulhouse, France
    Valeriy LUCHNIKOV, UMR 7361/UHA, Institut de Science des Matériaux de Mulhouse (IS2M), Mulhouse, France
    Noëlle MATHIEU, Institut de Radioprotection et de Sûreté Nucléaire (IRSN), Paris, France
    Benjamin NOTTELET, UMR 5247, Institut des Biomolécules Max Mousseron (IBMM), Montpelier, France
    Karine ANSELME, UMR 7361/UHA, Institut de Science des Matériaux de Mulhouse (IS2M), Mulhouse, France

    topicC-03 Drug delivery
    person_pinSidzigui OUEDRAOGO, UMR 7361/UHA, Institut de Science des Matériaux de Mulhouse (IS2M), Mulhouse, France
    P27 - Drug delivery - Development and characterization of pNIPAM-based microgels for drug delivery within dentoalveolar tissue engineering strategiesDrug deliveryMehdi SALAR AMOLI, KU Leuven
    Huimin YANG, KU Leuven
    Resmi ANAND, KU Leuven
    Mostafa EZELDEEN, KU Leuven
    Merve KÜBRA AKTAN , KU Leuven
    Annabel BRAEM, KU Leuven
    Reinhilde JACOBS, KU Leuven
    Veerle BLOEMEN, KU Leuven

    topicC-03 Drug delivery
    person_pinMehdi SALAR AMOLI, KU Leuven
    P28 - Drug delivery - Inhalable polyanhydride microparticles for delivery of hydrophobized gentamycin to treat bacterial pulmonary infectionsDrug deliveryKonrad KWIECIE?, AGH University of Science and Technology
    Karolina KNAP, AGH University of Science and Technology
    Katarzyna RECZY?SKA-KOLMAN, AGH University of Science and Technology
    Daria NIEWOLIK, Silesian University of Technology
    Katarzyna JASZCZ, Silesian University of Technology
    El?bieta PAMU?A, AGH University of Science and Technology

    topicC-03 Drug delivery
    person_pinKonrad KWIECIE?, AGH University of Science and Technology
    P29 - Drug delivery - Development and optimization of a Drug Delivery System based on alginate microspheresDrug deliveryDelia CATALANO, Politecnico di Milano
    Sophia DALFINO, Politecnico di Milano
    Matteo PITTON, Politecnico di Milano
    Silvia FARÈ, Politecnico di Milano

    topicC-03 Drug delivery
    person_pinMatteo PITTON, Politecnico di Milano
    P30 - Drug delivery - Poly(sebacic acid) microparticles loaded with azithromycin as pulmonary drug carriersDrug deliveryKarolina KNAP, AGH University of Science and Technology, Department of Biomaterials and Composites, Kraków, Poland
    Katarzyna RECZY?SKA-KOLMAN, AGH University of Science and Technology, Department of Biomaterials and Composites, Kraków, Poland
    Konrad KWIECIE?, AGH University of Science and Technology, Department of Biomaterials and Composites, Kraków, Poland
    Daria NIEWOLIK, Silesian University of Technology, Department of Physical Chemistry and Technology of Polymers, Gliwice, Poland
    Katarzyna JASZCZ, Silesian University of Technology, Department of Physical Chemistry and Technology of Polymers, Gliwice, Poland
    El?bieta PAMU?A, AGH University of Science and Technology, Department of Biomaterials and Composites, Kraków, Poland

    topicC-03 Drug delivery
    person_pinKarolina KNAP, AGH University of Science and Technology, Department of Biomaterials and Composites, Kraków, Poland
    P31 - Drug delivery - Bioadegradable Polydepsipeptide Based-Microparticles as Drug Delivery SystemsDrug deliveryZoé GARISOAIN, ICGM
    Tobias BURTON , ICGM
    Olivia GIANI, ICGM
    Julien PINAUD, ICGM
    Emmanuel BELAMIE, ICGM

    topicC-03 Drug delivery
    person_pinZoé GARISOAIN, ICGM
    P34 - Drug delivery - Nanoplatforms based on Platinum-Conjugated Graphene Oxide as Drug Delivery System for Glioblastoma and Breast CancerDrug deliveryElena GIUSTO, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy
    Franco FURLANI, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy
    Arianna ROSSI, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy and University of Messina, Italy
    Ludmila ZARSKA, Regional Centre of Advanced Technologies and Materials, Palacky? University Olomouc, Czech Republic
    Darren BEIRNE, Maynooth University, Dublin, Ireland
    Giada BASSI, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy and University of Chieti, Chieti (PE), Italy
    Andrea RUFFINI, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy
    Monica MONTESI, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy
    Diego MONTAGNER, Maynooth University, Dublin, Ireland
    Vaclav RANC, Regional Centre of Advanced Technologies and Materials, Palacky? University Olomouc, Czech Republic
    Silvia PANSERI, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy

    topicC-03 Drug delivery
    person_pinMonica MONTESI, National Research Council of Italy - Institute of Science and Technology for Ceramics (ISTEC-CNR), Faenza (RA), Italy
    P36 - Drug delivery - Development of a Nanocomposite Coating for Implant-Associated Local Drug Delivery from Neural ElectrodesDrug deliveryMosaieb HABIB, Institute of Inorganic Chemistry, Leibniz University Hannover, Hannover, Germany
    Tim-Joshua STRAUß, Institute of Inorganic Chemistry, Leibniz University Hannover, Hannover, Germany
    Kim KREISKÖTHER, Institute of Inorganic Chemistry, Leibniz University Hannover, Hannover, Germany
    Jennifer HARRE, Department of Otorhinolaryngology, Head and Neck Surgery, Hannover Medical School, Hannover, Germany
    Arne SCHIERZ, Institute of Inorganic Chemistry, Leibniz University Hannover, Hannover, Germany
    Thomas LENARZ, Department of Otorhinolaryngology, Head and Neck Surgery, Hannover Medical School, Hannover, Germany
    Athanasia WARNECKE, Department of Otorhinolaryngology, Head and Neck Surgery, Hannover Medical School, Hannover, Germany
    Peter BEHRENS, Institute of Inorganic Chemistry, Leibniz University Hannover, Hannover, Germany

    topicC-03 Drug delivery
    person_pinMosaieb HABIB, Institute of Inorganic Chemistry, Leibniz University Hannover, Hannover, Germany
    P37 - Drug delivery - Hyaluronic Acid-based stabilizer to improve skin penetration of activesDrug deliveryPaula ZAMORA, Fundación CIDETEC
    Aitziber LOPEZ, Fundación CIDETEC
    Damien DUPIN, Fundación CIDETEC

    topicC-03 Drug delivery
    person_pinPaula ZAMORA, Fundación CIDETEC
    P38 - Drug delivery - Smart encapsulation technologies for topical application based on bioinspired emulsifiersDrug deliveryAitziber LOPEZ, Fundación CIDETEC
    Natividad DÍAZ, Fundación CIDETEC
    Hans-Jürgen GRANDE, Fundación CIDETEC
    Iraida LOINAZ, Fundación CIDETEC
    Oihane VESGA, EMISSARY Cosmetics S.L.
    Irati ALDALUR, EMISSARY Cosmetics S.L.
    Maialen IRASTORZA, EMISSARY Cosmetics S.L.
    Elisabeth GARANGER, LCPO, Université de Bordeaux - CNRS - Bordeaux-INP
    Sébastien LECOMMANDOUX, LCPO, Université de Bordeaux - CNRS - Bordeaux-INP
    Damien DUPIN, Fundación CIDETEC
    Juliana DE SOUZA NUNES, Fundación CIDETEC

    topicC-03 Drug delivery
    person_pinJuliana DE SOUZA NUNES, Fundación CIDETEC
    P39 - Drug delivery - Development of a drug delivery system based on silica nanoparticles and siliconeDrug deliveryLuisa Vanessa STEINGRUBE, Leibniz University Hannover, Institute of Inorganic Chemistry
    Arne Klaus SCHIERZ, Leibniz University Hannover, Institute of Inorganic Chemistry
    Jennifer HARRE, Hannover Medical School, Nose-Threat Clinic
    Athanasia WARNECKE, Hannover Medical School, Nose-Threat Clinic
    Thomas LENARZ, Hannover Medical School, Nose-Threat Clinic
    Peter BEHRENS, Leibniz University Hannover, Institute of Inorganic Chemistry

    topicC-03 Drug delivery
    person_pinLuisa Vanessa STEINGRUBE, Leibniz University Hannover, Institute of Inorganic Chemistry
    P40 - Drug delivery - A Fibre-based Neuronal Guidance Scaffold for the Inner Ear: Delivery of Neurotrophin-3 and Decoration with LamininDrug deliveryMonika SEEGERS, Institute of Inorganic Chemistry, Leibniz University Hannover, Hannover, Germany
    Jennifer HARRE, Department of Otorhinolaryngology, Head and Neck Surgery, Hannover Medical School, Hannover, Germany
    Thomas LENARZ, Department of Otorhinolaryngology, Head and Neck Surgery, Hannover Medical School, Hannover, Germany
    Athanasia WARNECKE, Department of Otorhinolaryngology, Head and Neck Surgery, Hannover Medical School, Hannover, Germany
    Peter BEHRENS, Institute of Inorganic Chemistry, Leibniz University Hannover, Hannover, Germany

    topicC-03 Drug delivery
    person_pinMonika SEEGERS, Institute of Inorganic Chemistry, Leibniz University Hannover, Hannover, Germany
    P41 - Drug delivery - Multi-stimuli responsive protein nanoparticles for controlled drug delivery in cancer therapyDrug deliveryJuan GONZALEZ-VALDIVIESO, Molecular Imaging Innovations Institute (MI3), Weill Cornell Medicine, New York, USA
    Alessandra GIROTTI, Smart Biodevices for NanoMed Group, University of Valladolid, Valladolid, Spain. Institute of Biology and Molecular Genetics, Valladolid, Spain
    Javier ARIAS, Smart Biodevices for NanoMed Group, University of Valladolid, Valladolid, Spain. Institute of Biology and Molecular Genetics, Valladolid, Spain
    Moonsoo JIN, Molecular Imaging Innovations Institute (MI3), Weill Cornell Medicine, New York, USA

    topicC-03 Drug delivery
    person_pinJuan GONZALEZ-VALDIVIESO, Molecular Imaging Innovations Institute (MI3), Weill Cornell Medicine, New York, USA
    P45 - Drug delivery - Platinum-conjugated Graphene Oxide as Nanoplatform to Enhance Drug Delivery in OsteosarcomaDrug deliveryElena GIUSTO , Institute of Science and Technology for Ceramics - National Research Council of Italy
    Giada BASSI , Institute of Science and Technology for Ceramics - National Research Council of Italy
    Ludmila ZARSKA, Regional Centre of Advanced Technologies and Materials, Palacký University Olomouc
    Eoin MOYINIHAN, Maynooth University
    Arianna ROSSI, Institute of Science and Technology for Ceramics - National Research Council of Italy
    Andrea RUFFINI, Institute of Science and Technology for Ceramics - National Research Council of Italy
    Monica MONTESI, Institute of Science and Technology for Ceramics - National Research Council of Italy
    Diego MONTAGNER, Maynooth University
    Vaclav RANC, Regional Centre of Advanced Technologies and Materials, Palacký University Olomouc
    Silvia PANSERI, Institute of Science and Technology for Ceramics - National Research Council of Italy

    topicC-03 Drug delivery
    person_pinSilvia PANSERI, Institute of Science and Technology for Ceramics - National Research Council of Italy
    P46 - Drug delivery - Development of Trimagnetic Nanoparticles for Targeted Magnetic Hyperthermia of Prostate Cancer CellsDrug deliveryValentin NICA, Italian Institute of Technology
    Attilio MARINO, Italian Institute of Technology
    Carlotta PUCCI, Italian Institute of Technology
    Gianni CIOFANI, Italian Institute of Technology

    topicC-03 Drug delivery
    person_pinValentin NICA, Italian Institute of Technology
    P47 - Drug delivery - Incorporation and effect of lidocaine hydrochloride on octacalcium phosphateDrug deliveryIlijana KOVRLIJA, 1Rudolfs Cimdins Riga Biomaterials Innovation and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Pulka 3, Riga, LV-1007, Latvia
    Clara BARBUT, 1Rudolfs Cimdins Riga Biomaterials Innovation and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Pulka 3, Riga, LV-1007, Latvia
    Janis LOCS, 1 Rudolfs Cimdins Riga Biomaterials Innovation and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Pulka 3, Riga, LV-1007, Latvia; 2 Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia.
    Dagnija LOCA, 1 Rudolfs Cimdins Riga Biomaterials Innovation and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Pulka 3, Riga, LV-1007, Latvia; 2 Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia.

    topicC-03 Drug delivery
    person_pinIlijana KOVRLIJA, 1Rudolfs Cimdins Riga Biomaterials Innovation and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Pulka 3, Riga, LV-1007, Latvia
    P48 - Drug delivery - Dense collagen-based hydrogels loaded with anti-sclerostin antibodies enhance critical size bone defect repairDrug deliveryLudovic SICARD, URP 2496
    Sophie MAILLARD, URP 2496
    Catherine CHAUSSAIN, URP 2496
    Thibaud CORADIN, Sorbonne Université, CNRS, Chimie de la Matière Condensée de Paris, UMR 7574, Paris, France

    topicC-03 Drug delivery
    person_pinLudovic SICARD, URP 2496
    P49 - Drug delivery - Redox-dependent drug delivery by hyaluronic acid-based hydrogels for local tumor therapy of malignant melanomaDrug deliveryRebecca ROTHE, Helmholtz-Zentrum Dresden-Rossendorf, Institute of Radiopharmaceutical Cancer Research, Department of Radiopharmaceutical and Chemical Biology, Dresden, Germany; Technische Universität Dresden, Faculty of Chemistry and Food Chemistry, School of Science, Dresden, Germany
    Yong XU, B CUBE Center for Molecular Bioengineering, Technische Universität Dresden, Dresden, Germany
    Johanna WODTKE, Helmholtz-Zentrum Dresden-Rossendorf, Institute of Radiopharmaceutical Cancer Research, Department of Radiopharmaceutical and Chemical Biology, Dresden, Germany
    Sebastian MEISTER, Helmholtz-Zentrum Dresden-Rossendorf, Institute of Radiopharmaceutical Cancer Research, Department of Radiopharmaceutical and Chemical Biology, Dresden, Germany
    Yixin ZHANG, B CUBE Center for Molecular Bioengineering, Technische Universität Dresden, Dresden, Germany
    Jens PIETZSCH, Helmholtz-Zentrum Dresden-Rossendorf, Institute of Radiopharmaceutical Cancer Research, Department of Radiopharmaceutical and Chemical Biology, Dresden, Germany; Technische Universität Dresden, Faculty of Chemistry and Food Chemistry, School of Science, Dresden, Germany
    Sandra HAUSER, Helmholtz-Zentrum Dresden-Rossendorf, Institute of Radiopharmaceutical Cancer Research, Department of Radiopharmaceutical and Chemical Biology, Dresden, Germany

    topicC-03 Drug delivery
    person_pinRebecca ROTHE, Helmholtz-Zentrum Dresden-Rossendorf, Institute of Radiopharmaceutical Cancer Research, Department of Radiopharmaceutical and Chemical Biology, Dresden, Germany; Technische Universität Dresden, Faculty of Chemistry and Food Chemistry, School of Science, Dresden, Germany
    P1 - Biosensors and bioelectronics - Design of a fully-resorbable electronic device for neural stimulation and monitoringBiosensors and bioelectronicsSimon RÉGAL, CEA Grenoble, LETI-Clinatec et LETI-DTBS
    Maxime LEPRINCE, CEA Grenoble, LETI-DTBS et CERMAV
    Pascal MAILLEY, CEA Grenoble, LETI-DTBS
    Napoleon TORRES-MARTINEZ, CEA Grenoble, LETI-Clinatec
    David RATEL, CEA Grenoble, LETI-Clinatec
    Fabien SAUTER, CEA Grenoble, LETI-Clinatec
    Rachel AUZÉLY, CNRS, CERMAV
    Isabelle TEXIER, University Grenoble Alpes, CEA, LETI-DTBS, F-38000 Grenoble, France

    topicC-04 Biosensors and bioelectronics
    person_pinIsabelle TEXIER, University Grenoble Alpes, CEA, LETI-DTBS, F-38000 Grenoble, France
    P2 - Biosensors and bioelectronics - Electroactive MXene Accommodating Intraocular Lens DesignBiosensors and bioelectronicsEmma WARD, University of Brighton

    topicC-04 Biosensors and bioelectronics
    person_pinEmma WARD, University of Brighton
    P3 - Biosensors and bioelectronics - Self-healable and Stretchable Sensors for Human Motion MonitoringBiosensors and bioelectronicsMorteza ALEHOSSEINI, Department of Health Technology, Technical University of Denmark, 2800 Kgs, Lyngby, Denmark
    Tiberiu GABRIEL ZSURZSAN, Department of Electrical Engineering, Technical University of Denmark, 2800 Kgs, Lyngby, Denmark
    Jon SPANGENBERG, Department of Mechanical Engineering, Technical University of Denmark, 2800 Kgs, Lyngby, Denmark
    Firoz BABU KADUMUDI, Department of Health Technology, Technical University of Denmark, 2800 Kgs, Lyngby, Denmark
    Alireza DOLATSHAHI-PIROUZ, Department of Health Technology, Technical University of Denmark, 2800 Kgs, Lyngby, Denmark

    topicC-04 Biosensors and bioelectronics
    person_pinMorteza ALEHOSSEINI, Department of Health Technology, Technical University of Denmark, 2800 Kgs, Lyngby, Denmark
    P4 - Biosensors and bioelectronics - Effect of hydrogen peroxide produced by Glucose oxidase in inflammation and fibrosis for diabetes biosensor applicationBiosensors and bioelectronicsArvind RATHORE, Inserm, Univ. Bordeaux, U1026 Biotis, Bordeaux, France
    Sebastien GOUNEL, Centre de Recherche Paul Pascal (CRPP), CNRS UMR 5031, Univ. Bordeaux, Pessac, FRANCE
    Nicolas MANO, Centre de Recherche Paul Pascal (CRPP), CNRS UMR 5031, Univ. Bordeaux, Pessac, FRANCE
    Claudine BOIZIAU, Inserm, Univ. Bordeaux, U1026 Biotis, Bordeaux, France

    topicC-04 Biosensors and bioelectronics
    person_pinArvind RATHORE, Inserm, Univ. Bordeaux, U1026 Biotis, Bordeaux, France
    P5 - Biosensors and bioelectronics - Functionalized silica-based sensors for real-time viral screeningBiosensors and bioelectronicsPerrine ROBIN, Institute of Chemical Sciences and Engineering, Ecole Polytechnique Fédérale de Lausanne
    Lucas MAYORAZ, Institute of Chemical Sciences and Engineering, Ecole Polytechnique Fédérale de Lausanne
    Céline JOURNOT, Institute of Chemical Sciences and Engineering, Ecole Polytechnique Fédérale de Lausanne
    Davide STAEDLER, TIBIO Services, Scitec Research SA
    Francesco BERTONI, Institute of Oncology Research, Scuola universitaria professionale della Svizzera
    Igor STEFANINI, Institute of Systems and Applied Electronics, Scuola universitaria professionale della Svizzera
    Sandrine GERBER-LEMAIRE, Institute of Chemical Sciences and Engineering, Ecole Polytechnique Fédérale de Lausanne

    topicC-04 Biosensors and bioelectronics
    person_pinPerrine ROBIN, Institute of Chemical Sciences and Engineering, Ecole Polytechnique Fédérale de Lausanne
    P6 - Biosensors and bioelectronics - Use of Mixed Iridium and Titanium Oxides for pH Sensing in BiomaterialsBiosensors and bioelectronicsJitrenka JIRU, University of Chemistry and Technology in Prague, Prague, Czech Republic
    Vojtech HYBASEK, University of Chemistry and Technology in Prague, Prague, Czech Republic
    Jaroslav FOJT, University of Chemistry and Technology in Prague, Prague, Czech Republic

    topicC-04 Biosensors and bioelectronics
    person_pinJitrenka JIRU, University of Chemistry and Technology in Prague, Prague, Czech Republic
    P1 - Cardiovascular tissue - Development Of A Cardiac Bio-prosthesisCardiovascular tissueJean-Philippe JEHL, Institut Jean Lamour UMR 7198 CNRS / Université de Lorraine, Nancy, France
    Aurelia POERIO, Institut Jean Lamour - University of Lorraine
    Mélanie LOVERA-LEROUX, Institut Jean Lamour - University of Lorraine
    Solenne FLEUTOT, Institut Jean Lamour - University of Lorraine
    João F. MANO, CICECO - Department of chemistry - University of Aveiro
    FRANCK CLEYMAND, Institut Jean Lamour - University of Lorraine

    topicC-05 Cardio/Vascular tissue
    person_pinJean-Philippe JEHL, Institut Jean Lamour UMR 7198 CNRS / Université de Lorraine, Nancy, France
    P2 - Cardiovascular tissue - Injectable hydrogels for microRNA delivery to promote direct cell reprogramming in cardiac regenerationCardiovascular tissueElena MARCELLO, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy
    Letizia NICOLETTI, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy
    Camilla PAOLETTI, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy
    Valeria CHIONO, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy

    topicC-05 Cardio/Vascular tissue
    person_pinElena MARCELLO, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy
    P4 - Cardiovascular tissue - Fabrication and characterisation of lactate releasing PLGA particles for cardiac regenerationCardiovascular tissueChristopher JAMES, Institute of bioengineering of Cataluña

    topicC-05 Cardio/Vascular tissue
    person_pinChristopher JAMES, Institute of bioengineering of Cataluña
    P6 - Cardiovascular tissue - Tailored tubular collagen scaffolds through ice-templating for arterial replacementCardiovascular tissueIsabelle MARTINIER, Laboratoire de Chimie de la Matière Condensée de Paris (LCMCP), Sorbonne University, Paris, France
    Minaine BOUABDALLAH, Laboratoire de Chimie de la Matière Condensée de Paris (LCMCP), Sorbonne University, Paris, France
    Florian FAGE, Laboratoire de Chimie de la Matière Condensée de Paris (LCMCP), Sorbonne University, Paris, France
    Alessia CASTAGNINO, Laboratoire d'Hydrodynamique (LadHyX), Ecole Polytechnique, Palaiseau, France
    Abdul BARAKAT, Laboratoire d'Hydrodynamique (LadHyX), Ecole Polytechnique, Palaiseau, France
    Francisco M. FERNANDES, Laboratoire de Chimie de la Matière Condensée de Paris (LCMCP), Sorbonne University, Paris, France
    Léa TRICHET, Laboratoire de Chimie de la Matière Condensée de Paris (LCMCP), Sorbonne University, Paris, France

    topicC-05 Cardio/Vascular tissue
    person_pinIsabelle MARTINIER, Laboratoire de Chimie de la Matière Condensée de Paris (LCMCP), Sorbonne University, Paris, France
    P7 - Cardiovascular tissue - Integration of Mesenchymal Stem Cell-Derived Fibroblast Loaded Hydrogel over the Tubular Scaffold to Mimic the External Layer of Blood VesselCardiovascular tissueGozde Ervin KOLE, Acibadem Mehmet Ali Aydinlar University (ACU), Graduate School of Health Sciences, Department of Medical Biotechnology, ACU Biomaterials Center, Istanbul, Turkey
    Halime KENAR, Acibadem Mehmet Ali Aydinlar University (ACU), Faculty of Engineering, Department of Medical Engineering, ACU Biomaterials Center, Istanbul, Turkey
    Vasif HASIRCI, Acibadem Mehmet Ali Aydinlar University (ACU), Faculty of Engineering, Department of Medical Engineering, ACU Biomaterials Center, Istanbul, Turkey
    Deniz YUCEL, Acibadem Mehmet Ali Aydinlar University (ACU), School of Medicine, Department of Histology and Embryology, ACU Biomaterials Center, Istanbul, Turkey

    topicC-05 Cardio/Vascular tissue
    person_pinGozde Ervin KOLE, Acibadem Mehmet Ali Aydinlar University (ACU), Graduate School of Health Sciences, Department of Medical Biotechnology, ACU Biomaterials Center, Istanbul, Turkey
    P8 - Cardiovascular tissue - Biohybrid Miniaturized Valves based on Elastin-like RecombinamersCardiovascular tissueSergio ACOSTA, Department of Biohybrid & Medical Textiles (Biotex), AME –Institute of Applied Medical Engineering, Helmholtz Institute, RWTH Aachen University, Aachen Germany
    Fernando GONZALEZ-PEREZ, G.I.R. BIOFORGE, CIBER-BBN, University of Valladolid, Valladolid, Spain
    Stephan RÜTTEN, Electron Microscopy Facility, Uniklinik RWTH Aachen, Aachen, Germany
    Alexander KOPP, Meotec GmbH, Aachen, Germany
    Heinz-Werner HENKE, Innovative Tomography Products GmbH, Bochum, Germany
    Phillip BRUNERS, Klinik für Diagnostische und Interventionelle Radiologie, Universitätsklinikum Aachen, Aachen, Germany.
    Caroline EMONTS, Institut für Textiltechnik Aachen (ITA), RWTH Aachen University, Aachen, Germany.
    Thomas GRIES, Institut für Textiltechnik Aachen (ITA), RWTH Aachen University, Aachen, Germany.
    J. Carlos RODRIGUEZ-CABELLO, G.I.R. BIOFORGE, CIBER-BBN, University of Valladolid, Valladolid, Spain
    Stefan JOCKENHOEVEL, Department of Biohybrid & Medical Textiles (Biotex), AME –Institute of Applied Medical Engineering, Helmholtz Institute, RWTH Aachen University, Aachen Germany. AMIBM-Aachen-Maastricht-Institute for Biobased Materials, Maastricht University, The Netherlands
    Alicia FERNANDEZ-COLINO, Department of Biohybrid & Medical Textiles (Biotex), AME –Institute of Applied Medical Engineering, Helmholtz Institute, RWTH Aachen University, Aachen Germany

    topicC-05 Cardio/Vascular tissue
    person_pinSergio ACOSTA, Department of Biohybrid & Medical Textiles (Biotex), AME –Institute of Applied Medical Engineering, Helmholtz Institute, RWTH Aachen University, Aachen Germany
    P9 - Cardiovascular tissue - Developing next generation biodegradable coronary artery stentsCardiovascular tissueDaniel HEATH, University of Melbourne

    topicC-05 Cardio/Vascular tissue
    person_pinDaniel HEATH, University of Melbourne
    P10 - Cardiovascular tissue - Silk Fibroin Tubular Scaffolds: Towards the Development of an Aortic Heart Valve ReplacementCardiovascular tissueAmanda SCHMIDT, BioTex AME, RWTH Aachen, DE; Spintex Engineering, UK
    Alicia FERNÁNDEZ-COLINO, Biotex AME, RWTH Aachen, DE
    Alex GREENHALGH, Spintex Engineering, UK
    Stefan JOCKENHOEVEL, BioTex AME, RWTH Aachen, DE
    Martin FRYDRYCH, Spintex Engineering, UK

    topicC-05 Cardio/Vascular tissue
    person_pinAmanda SCHMIDT, BioTex AME, RWTH Aachen, DE; Spintex Engineering, UK
    P11 - Cardiovascular tissue - Characterisation of a gelatin release system for the electrophoretic deposition of seamless collagen tubes for use as vascular graftsCardiovascular tissueJack BONFIELD, University of Cambridge
    David BARRETT, University of Cambridge
    Ruth CAMERON, University of Cambridge
    Serena BEST, University of Cambridge

    topicC-05 Cardio/Vascular tissue
    person_pinJack BONFIELD, University of Cambridge
    P12 - Cardiovascular tissue - WEAVING FROM CELL-ASSEMBLED EXTRACELLULAR MATRIX YARN: TOWARDS BETTER TISSUE-ENGINEERED VASCULAR GRAFTSCardiovascular tissueGaëtan ROUDIER, BioTis Inserm U1026 - University of Bordeaux
    Marie HOURQUES, BioTis Inserm U1026 - University of Bordeaux
    Nicolas DA SILVA, BioTis Inserm U1026 - University of Bordeaux
    Maude GLUAIS, BioTis Inserm U1026 - University of Bordeaux
    Nicolas L'HEUREUX, BioTis Inserm U1026 - University of Bordeaux

    topicC-05 Cardio/Vascular tissue
    person_pinGaëtan ROUDIER, BioTis Inserm U1026 - University of Bordeaux
    P2 - Dental and maxillofacial - Physical and biological behaviour of flowable fiber reinforced composite compared to alternative bulk filling compositesDental and maxillofacialNina ATTIK, Université de Lyon — Université Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, Lyon, France; Universitéde Lyon, Université Claude Bernard Lyon 1, Faculté d’Odontologie, Lyon, France
    Pierre COLON, Assistance Publique-Hôpitaux de Paris, Hôpital Rothschild, Service d’Odontologie, Université de Paris, Faculté dentaire, Paris, France
    Rémy GAUTHIER, Université de Lyon, CNRS, INSA Lyon, UCBL, MatéIS, France
    Charlène CHEVALIER, Université de Lyon — Université Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, Lyon, France
    Brigitte GROSGOGEAT, Université de Lyon — Université Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, Lyon, France
    Hazem ABOUELLEIL, Université de Lyon — Université Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, Lyon, France

    topicC-06 Dental and maxillofacial
    person_pinNina ATTIK, Université de Lyon — Université Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, Lyon, France; Universitéde Lyon, Université Claude Bernard Lyon 1, Faculté d’Odontologie, Lyon, France
    P3 - Dental and maxillofacial - Critical aspects of Ti-based bulk metallic glasses for dental implant manufacturing Dental and maxillofacialLaurabelle GAUTIER, 1 MATEIS UMR CNRS 5510, INSA Lyon, Université Claude Bernard Lyon 1, 7 Av. Jean Capelle, F-69621, Villeurbanne, France
    Claire GAILLARD, MATEIS UMR CNRS 5510, INSA Lyon, Université Claude Bernard Lyon 1
    Benoît TER-OVANESSIAN, MATEIS UMR CNRS 5510, INSA Lyon, Université Claude Bernard Lyon 1
    Damien FABRÈGUE, MATEIS UMR CNRS 5510, INSA Lyon, Université Claude Bernard Lyon 1
    Jérôme CHEVALIER, MATEIS UMR CNRS 5510, INSA Lyon, Université Claude Bernard Lyon 1

    topicC-06 Dental and maxillofacial
    person_pinLaurabelle GAUTIER, 1 MATEIS UMR CNRS 5510, INSA Lyon, Université Claude Bernard Lyon 1, 7 Av. Jean Capelle, F-69621, Villeurbanne, France
    P4 - Dental and maxillofacial - Synergistic combination of Calcium and Cerium ions doping in silica-based mesoporous nanoparticles for periodontal regeneration applicationsDental and maxillofacialAnna THEOCHARIDOU, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Georgia K. POUROUTZIDOU, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Ioannis TSAMESIDIS, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Maria BOUSNAKI, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Anastasia BEKETOVA, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Eleana KONTONASAKI, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece

    topicC-06 Dental and maxillofacial
    person_pinIoannis TSAMESIDIS, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    P5 - Dental and maxillofacial - RNAseq analysis reveals divergent molecular events that direct hBMSCs toward fibrosis or bone regeneration: importance of inflammation regulationDental and maxillofacialLaura COQUELIN, IMRB U955-E10, Inserm, Unité d'Ingénierie et de Thérapie Cellulaire-Etablissement Français du Sang, Université Paris-Est, Créteil, France
    Gabriel SOLVI, IMRB U955-E10, Inserm, Unité d'Ingénierie et de Thérapie Cellulaire-Etablissement Français du Sang, Université Paris-Est, Créteil, France
    Luciano VIDAL, UMR-1238, INSERM, laboratoire « Sarcomes osseux et remodelage des tissus calcifiés », Université de Nantes, Nantes, France
    Hélène ROUARD, IMRB U955-E10, Inserm, Unité d'Ingénierie et de Thérapie Cellulaire-Etablissement Français du Sang, Université Paris-Est, Créteil, France
    Hakim HOCINI, IMRB U955, Inserm, Vaccine Research Institute, Université Paris Est-Créteil, France
    Nathalie CHEVALLIER, IMRB U955-E10, Inserm, Unité d'Ingénierie et de Thérapie Cellulaire-Etablissement Français du Sang, Université Paris-Est, Créteil, France

    topicC-06 Dental and maxillofacial
    person_pinNathalie CHEVALLIER, IMRB U955-E10, Inserm, Unité d'Ingénierie et de Thérapie Cellulaire-Etablissement Français du Sang, Université Paris-Est, Créteil, France
    P6 - Dental and maxillofacial - Supersaturated Ion Solutions for Dentin MineralizationDental and maxillofacialTimo PELTOLA, Research Development and Production Department, Stick Tech Ltd – Member of GC Group, Turku, Finland
    Mona GIBREEL, Department of Biomaterials Science and Turku Clinical Biomaterial Center -TCBC Institute of Dentistry, University of Turku, Turku, Finland
    Laleh SOLHI, Department of Bioproducts and Biosystems, Aalto University, Espoo, Finland

    topicC-06 Dental and maxillofacial
    person_pinTimo PELTOLA, Research Development and Production Department, Stick Tech Ltd – Member of GC Group, Turku, Finland
    P7 - Dental and maxillofacial - HYDROGEL BASED NANO-DELIVERY SYSTEM FOR ONE SHOT REGENERATIVE THERAPY OF PERI-IMPLANTITISDental and maxillofacialLily PAILLAT, Nantes Université, Oniris, CHU Nantes, INSERM, Univ Angers, Regenerative Medicine and Skeleton, RMeS, F-44000 Nantes, France
    Marika MOSINA, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Pulka Street 3, LV-1007 Riga, Latvia ; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Kalku Street 1, LV-1658 Riga, Latvia
    Maud VIALLON, Laboratory for Biomaterials and Bioengineering, Laval University and CHU de Quebec Division of Regenerative Medicine, Quebec, QC, Canada
    Estelle BRAY, Nantes Université, Oniris, CHU Nantes, INSERM, Univ Angers, Regenerative Medicine and Skeleton, RMeS, F-44000 Nantes, France
    Liga STIPNIECE, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Pulka Street 3, LV-1007 Riga, Latvia ; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Kalku Street 1, LV-1658 Riga, Latvia
    Pascale CHEVALLIER, Laboratory for Biomaterials and Bioengineering, Laval University and CHU de Quebec Division of Regenerative Medicine, Quebec, QC, Canada
    Gildas RÉTHORÉ, Nantes Université, Oniris, CHU Nantes, INSERM, Univ Angers, Regenerative Medicine and Skeleton, RMeS, F-44000 Nantes, France
    Alexis GAUDIN, Nantes Université, Oniris, CHU Nantes, INSERM, Univ Angers, Regenerative Medicine and Skeleton, RMeS, F-44000 Nantes, France
    Pierre WEISS, Nantes Université, Oniris, CHU Nantes, INSERM, Univ Angers, Regenerative Medicine and Skeleton, RMeS, F-44000 Nantes, France
    Assem SOUEIDAN, Nantes Université, Oniris, CHU Nantes, INSERM, Univ Angers, Regenerative Medicine and Skeleton, RMeS, F-44000 Nantes, France
    Diego MANTOVANI, Laboratory for Biomaterials and Bioengineering, Laval University and CHU de Quebec Division of Regenerative Medicine, Quebec, QC, Canada
    Janis LOCS, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Pulka Street 3, LV-1007 Riga, Latvia ; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Kalku Street 1, LV-1658 Riga, Latvia

    topicC-06 Dental and maxillofacial
    person_pinLily PAILLAT, Nantes Université, Oniris, CHU Nantes, INSERM, Univ Angers, Regenerative Medicine and Skeleton, RMeS, F-44000 Nantes, France
    P8 - Dental and maxillofacial - Development of an Osteo-cutaneous Perforator Free Flap On A Murine Model by Tissue Engineering for Mandible Interrupting Bone Defects ReconstructionDental and maxillofacialUgo LANCIEN, Nantes University
    Baptiste CHARBONNIER, Nantes University
    Pierre PERROT, Nantes University
    Pierre CORRE, Nantes University
    Pierre WEISS, Nantes University

    topicC-06 Dental and maxillofacial
    person_pinUgo LANCIEN, Nantes University
    P10 - Dental and maxillofacial - Skeletal anchored palatal expanders: primary stability analysis of three different configurationsDental and maxillofacialMATTEO SCHIAFFINO, Università degli Studi di Genova
    MARCO MIGLIORATI, Università degli Studi di Genova
    ALBERTO LAGAZZO, Università degli Studi di Genova
    FABRIZIO BARBERIS, Università degli Studi di Genova

    topicC-06 Dental and maxillofacial
    person_pinMATTEO SCHIAFFINO, Università degli Studi di Genova
    P11 - Dental and maxillofacial - Tridimensional In Vitro Models for Dental Implant Research: A Systematic ReviewDental and maxillofacialGhannaa SHAYYA, Inserm BioTis, Laboratory for the Bioengineering of Tissues, University of Bordeaux, 146 Rue Léo Saignat, 33000 Bordeaux, France

    topicC-06 Dental and maxillofacial
    person_pinGhannaa SHAYYA, Inserm BioTis, Laboratory for the Bioengineering of Tissues, University of Bordeaux, 146 Rue Léo Saignat, 33000 Bordeaux, France
    P12 - Dental and maxillofacial - Comparison of Commercially Available Collagen-Based Membranes GTR/GBRDental and maxillofacialFederico BARRINO, Department of Experimental Medicine, University of Campania “Luigi Vanvitelli”, Via L. De Crecchio 7, 80138 Naples, Italy
    Valentina VASSALLO, Department of Experimental Medicine, University of Campania “Luigi Vanvitelli”, Via L. De Crecchio 7, 80138 Naples, Italy
    Chiara SCHIRALDI, Department of Experimental Medicine, University of Campania “Luigi Vanvitelli”, Via L. De Crecchio 7, 80138 Naples, Italy
    Annalisa LA GATTA, Department of Experimental Medicine, University of Campania “Luigi Vanvitelli”, Via L. De Crecchio 7, 80138 Naples, Italy

    topicC-06 Dental and maxillofacial
    person_pinFederico BARRINO, Department of Experimental Medicine, University of Campania “Luigi Vanvitelli”, Via L. De Crecchio 7, 80138 Naples, Italy
    P13 - Dental and maxillofacial - Preclinical evaluation of an injectable composite material for sinus lift, including implant placementDental and maxillofacialSylvain CATROS, Inserm U1026 Biotis, University of Bordeaux, France
    Mathilde FENELON, Inserm U1026 Biotis, University of Bordeaux, France
    Sandrine AUGET, SILTISS, Saint Viance, France
    Jean-Christophe FRICAIN, Inserm U1026 Biotis, University of Bordeaux, France
    Laurent BIDAULT, SILTISS, Saint Viance, France
    Joëlle AMEDEE, Inserm U1026 Biotis, University of Bordeaux, France
    Didier LETOURNEUR, SILTISS, Saint Viance, France

    topicC-06 Dental and maxillofacial
    person_pinSylvain CATROS, Inserm U1026 Biotis, University of Bordeaux, France
    P14 - Dental and maxillofacial - Effect of pH on Fluoride Release from Dental Glass Ionomer CementsDental and maxillofacialTorbjørn KNARVANG, Nordic Institute of Dental Materials - NIOM
    Jan T. SAMUELSEN, Nordic Institute of Dental Materials - NIOM
    Else MORISBAK, Nordic Institute of Dental Materials - NIOM
    Morten SYVERUD, Nordic Institute of Dental Materials - NIOM

    topicC-06 Dental and maxillofacial
    person_pinTorbjørn KNARVANG, Nordic Institute of Dental Materials - NIOM
    P15 - Dental and maxillofacial - Glass-ceramics with zirconia in silica matrix: the effect of the concentration and microstructureDental and maxillofacialLe FU, Central South University
    Håkan ENGQVIST, Uppsala University
    Wei XIA, Uppsala University

    topicC-06 Dental and maxillofacial
    person_pinWei XIA, Uppsala University
    P16 - Dental and maxillofacial - Development of a personalised 3D bioconstruct for oral maxillofacial critical bone defect applicationDental and maxillofacialAna Catarina COSTA, i3S - Instituto de Investigação e Inovação em Saúde/INEB - Instituto Nacional de Engenharia Biomédica/FEUP - Faculdade de Engenharia da Universidade do Porto
    Patrícia Mafalda ALVES, i3S - Instituto de Investigação e Inovação em Saúde/INEB - Instituto Nacional de Engenharia Biomédica/FMDUP - Faculdade de Medicina Dentária da Universidade do Porto
    Cristina BARRIAS, i3S - Instituto de Investigação e Inovação em Saúde/INEB - Instituto Nacional de Engenharia Biomédica/ICBAS - Instituto de Ciências Biomédicas Abel Salazar da Universidade do Porto
    Fernando Jorge MONTEIRO, i3S - Instituto de Investigação e Inovação em Saúde/INEB - Instituto Nacional de Engenharia Biomédica/FEUP - Faculdade de Engenharia da Universidade do Porto
    Christiane SALGADO, i3S - Instituto de Investigação e Inovação em Saúde/INEB - Instituto Nacional de Engenharia Biomédica

    topicC-06 Dental and maxillofacial
    person_pinChristiane SALGADO, i3S - Instituto de Investigação e Inovação em Saúde/INEB - Instituto Nacional de Engenharia Biomédica
    P17 - Dental and maxillofacial - Effect of irradiation distance on flexural strength, dentin bond strength, and degree of conversion of resin composites polymerized with high-irradiance light curing unitsDental and maxillofacialSun-Young KIM, Department of Conservative Dentistry, Seoul National University School of Dentistry
    Hyun Ju KIM, Department of Periodontics, Seoul National University Dental Hospital
    Soram OH, Department of Conservative Dentistry, Kyung Hee University School of Dentistry

    topicC-06 Dental and maxillofacial
    person_pinHyun Ju KIM, Department of Periodontics, Seoul National University Dental Hospital
    P18 - Dental and maxillofacial - First Principles Modelling of Enamel Erosion and RemineralisationDental and maxillofacialPalwinder KAUR, School of Dentistry, University of Leeds, Leeds, UK
    Maisoon AL-JAWAD, School of Dentistry, University of Leeds, Leeds, UK
    Hellen CHAPPELL, School of Food Science and Nutrition, University of Leeds, Leeds, UK

    topicC-06 Dental and maxillofacial
    person_pinPalwinder KAUR, School of Dentistry, University of Leeds, Leeds, UK
    P19 - Dental and maxillofacial - Development and characterisation of Ca-doped coatings for dental implants to optimise the initial bone regeneration processesDental and maxillofacialIñaki GARCÍA-ARNÁEZ, Faculty of Chemistry, University of the Basque Country (UPV/EHU)
    Francisco ROMERO-GAVILÁN, Department of Industrial Engineering Systems and Design, Universitat Jaume I
    Andreia CERQUEIRA, Department of Industrial Engineering Systems and Design, Universitat Jaume I
    Félix ELORTZA, Proteomics Platform, CicBiogune
    Mikel AZKARGORTA, Proteomics Platform, CicBiogune
    Julio SUAY, Department of Industrial Engineering Systems and Design, Universitat Jaume I
    Mariló GURRUCHAGA, Faculty of Chemistry, University of the Basque Country (UPV/EHU)
    Isabel GOÑI, Faculty of Chemistry, University of the Basque Country (UPV/EHU)

    topicC-06 Dental and maxillofacial
    person_pinJulio SUAY, Department of Industrial Engineering Systems and Design, Universitat Jaume I
    P21 - Dental and maxillofacial - Compositional Differences in In-Vivo Biofilm Formed on Bracket Materials: A Prospective Pilot StudyDental and maxillofacialJung-Sub AN, Department of Orthodontics, Seoul National University Dental Hospital, Seoul, Republic of Korea
    Sug-Joon AHN, Department of Orthodontics, School of Dentistry, Seoul National University, Seoul, Republic of Korea
    Jin Beom KIM, Department of Orthodontics, School of Dentistry, Seoul National University, Seoul, Republic of Korea

    topicC-06 Dental and maxillofacial
    person_pinJung-Sub AN, Department of Orthodontics, Seoul National University Dental Hospital, Seoul, Republic of Korea
    P22 - Dental and maxillofacial - In vivo evaluation of 3D printed, degradable and defect specific composite scaffolds for maxillary bone defects Dental and maxillofacialPaula KORN, Department of Oral and Maxillofacial Surgery, Charité - Universitätsmedizin Berlin, Corporate Member of Freie Universität Berlin, Humboldt-Universität zu Berlin, and Berlin Institute of Health, Berlin, Germany
    Margarete KORN, Faculty of Medicine, TU Dresden, Dresden, Germany
    Richard RICHTER, Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine, TU Dresden, Dresden, Germany
    Corina VATER, Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine, TU Dresden, Dresden, Germany
    Winnie PRADEL, Clinic for Oral and Maxillofacial Surgery, University Hospital Carl Gustav Carus and Faculty of Medicine, TU Dresden, Dresden, Germany
    Martina RAUNER, Division of Endocrinology, Diabetes, and Bone Diseases, Department of Medicine III, University Hospital Carl Gustav Carus and Faculty of Medicine Faculty of Medicine, TU Dresden, Dresden, Germany
    Anja LODE, Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine, TU Dresden, Dresden, Germany
    Tilman AHLFELD, Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine, TU Dresden, Dresden, Germany

    topicC-06 Dental and maxillofacial
    person_pinPaula KORN, Department of Oral and Maxillofacial Surgery, Charité - Universitätsmedizin Berlin, Corporate Member of Freie Universität Berlin, Humboldt-Universität zu Berlin, and Berlin Institute of Health, Berlin, Germany
    P2 - Osteoarticular tissue - Tuning the Physical Properties of Collagen/Hyaluronan Hydrogels to favor Mesenchymal Stem Cells Differentiation into NP Cells: A Step forwards Intervertebral Disc RegenerationOsteoarticular tissueAntoine FRAYSSINET, Sorbonne University, CNRS, UMR 7574 – Chemistry of Condensed Matter Laboratory
    Esther POTIER, Université de Paris - CNRS – Hôpital Lariboisière - B3OA
    Gervaise MOSSER, Sorbonne University, CNRS, UMR 7574 – Chemistry of Condensed Matter Laboratory
    Christophe HÉLARY, Sorbonne University, CNRS, UMR 7574 – Chemistry of Condensed Matter Laboratory - F-75005 Paris, France

    topicC-10 Osteoarticular
    person_pinChristophe HÉLARY, Sorbonne University, CNRS, UMR 7574 – Chemistry of Condensed Matter Laboratory - F-75005 Paris, France
    P3 - Osteoarticular tissue - Vacuum induction casted MgZnCa alloy based biodegradable bone plateOsteoarticular tissueManisha BEHERA, UMR 8207-UMET-Unité Matériaux et Transformations, Université de Lille, Lille, France
    Rajashekhara SHABADI, UMR 8207-UMET-Unité Matériaux et Transformations, Université de Lille, Lille, France
    Feng HILDEBRAND, INSERM U1008- “Controlled Drug Delivery systems and Biomaterials”, Faculté de Médecine, Université de Lille, Lille, France
    Cosmin GRUESCU, UMR 8207-UMET-Unité Matériaux et Transformations, Université de Lille, Lille, France
    David BALLOY, UMR 8207-UMET-Unité Matériaux et Transformations, Université de Lille, Lille, France

    topicC-10 Osteoarticular
    person_pinManisha BEHERA, UMR 8207-UMET-Unité Matériaux et Transformations, Université de Lille, Lille, France
    P4 - Osteoarticular tissue - PLATELET-DERIVED EXTRACELLULAR VESICLES SHOW THERAPEUTIC EFFECTS ON A 3D TENDON DISEASE MODELOsteoarticular tissueAna Luísa GRAÇA, 13B's Research Group, I3Bs – Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark, Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805-017 Barco, Guimarães, Portugal; 2ICVS/3B’s–PT Government Associate Laboratory, Braga/Guimarães, Portugal;
    Rui DOMINGUES, 13B's Research Group, I3Bs – Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark, Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805-017 Barco, Guimarães, Portugal; 2ICVS/3B’s–PT Government Associate Laboratory, Braga/Guimarães, Portugal;
    Isabel CALEJO, 13B's Research Group, I3Bs – Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark, Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805-017 Barco, Guimarães, Portugal; 2ICVS/3B’s–PT Government Associate Laboratory, Braga/Guimarães, Portugal;
    Manuel GOMÉZ-FLORIT, 13B's Research Group, I3Bs – Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark, Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805-017 Barco, Guimarães, Portugal; 2ICVS/3B’s–PT Government Associate Laboratory, Braga/Guimarães, Portugal;
    Manuela GOMES, 13B's Research Group, I3Bs – Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark, Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805-017 Barco, Guimarães, Portugal; 2ICVS/3B’s–PT Government Associate Laboratory, Braga/Guimarães, Portugal;

    topicC-10 Osteoarticular
    person_pinRui DOMINGUES, 13B's Research Group, I3Bs – Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark, Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805-017 Barco, Guimarães, Portugal; 2ICVS/3B’s–PT Government Associate Laboratory, Braga/Guimarães, Portugal;
    P5 - Osteoarticular tissue - Multifunctional Hyaluronic acid-based viscosupplementation devices with intrinsic anti-inflammatory properties Osteoarticular tissueMario DI GENNARO, Department of Environmental, Biological and Pharmaceutical Sciences and Technologies (DiSTABiF), University of Campania “L. Vanvitelli”, Institute of Polymers, Composites and Biomaterials, National Research Council, (IPCB-CNR)
    Francesca DELLA SALA, Institute of Polymers, Composites and Biomaterials, National Research Council, (IPCB-CNR)
    Gennaro LONGOBARDO, Department of Chemical, Materials and Production Engineering, University of Naples “Federico II”
    Maurizio PAGLIUCA, Altergon Italia s.r.l, Zona Industriale ASI, Morra De Sanctis (AV), 83040 Italy
    Nicola SOLIMANDO, Altergon Italia s.r.l, Zona Industriale ASI, Morra De Sanctis (AV), 83040 Italy
    Luigi AMBROSIO, Institute of Polymers, Composites and Biomaterials, National Research Council, (IPCB-CNR)
    Assunta BORZACCHIELLO, Institute of Polymers, Composites and Biomaterials, National Research Council, (IPCB-CNR)

    topicC-10 Osteoarticular
    person_pinAssunta BORZACCHIELLO, Institute of Polymers, Composites and Biomaterials, National Research Council, (IPCB-CNR)
    P6 - Osteoarticular tissue - Biotechnological chondroitin as novel biopolymer for tissue regeneration: the natural -like polysaccharide compared to the crosslinked one in human chondrocytes in vitro culturesOsteoarticular tissueValentina VASSALLO, Department of Experimental Medicine, University of Campania "Luigi Vanvitelli"
    Celeste DI MEO, Department of Experimental Medicine, University of Campania "Luigi Vanvitelli"
    Annalisa LA GATTA, Department of Experimental Medicine, University of Campania "Luigi Vanvitelli"
    Donatella CIMINI, Department of Experimental Medicine, University of Campania "Luigi Vanvitelli"
    Emiliano BEDINI, 2Dept. Chemical Sciences, University of Naples Federico II,
    Chiara SCHIRALDI, Department of Experimental Medicine, University of Campania "Luigi Vanvitelli"

    topicC-10 Osteoarticular
    person_pinChiara SCHIRALDI, Department of Experimental Medicine, University of Campania "Luigi Vanvitelli"
    P7 - Osteoarticular tissue - Construction of a Multilayer Scaffold for Osteochondral Tissue EngineeringOsteoarticular tissueDeniz BASÖZ, Acibadem Mehmet Ali Aydinlar University (ACU), Graduate School of Health Sciences, Department of Medical Biotechnology , ACU Biomaterials Center, Istanbul, Turkey
    Vasif HASIRCI, Faculty of Engineering, Department of Medical Engineering, Acibadem Mehmet Ali Aydinlar University
    Deniz YUCEL, School of Medicine, Department of Histology and Embryology, Acibadem Mehmet Ali Aydinlar University (ACU)

    topicC-10 Osteoarticular
    person_pinDeniz BASÖZ, Acibadem Mehmet Ali Aydinlar University (ACU), Graduate School of Health Sciences, Department of Medical Biotechnology , ACU Biomaterials Center, Istanbul, Turkey
    P8 - Osteoarticular tissue - Preparation and Characterization of 3D printed Poly (l-lactic-co-glycolic acid)-Strontium doped Tricalcium Phosphate bone scaffolds Osteoarticular tissueSamuel TIPLADY , Queen's University Belfast
    Alex LENNON, Queen's University Belfast
    Eneko LARRANETA , Queen's University Belfast
    Fraser BUCHANAN , Queen's University Belfast
    Krishna MANDA, Queen's University Belfast

    topicC-10 Osteoarticular
    person_pinSamuel TIPLADY , Queen's University Belfast
    P9 - Osteoarticular tissue - Innovative modified gelatin and unmodified chondroitins based scaffolds for cartilage regenerationOsteoarticular tissueValentina VASSALLO, Department of Experimental Medicine, University of Campania “Luigi Vanvitelli”, Via L. De Crecchio 7, 80138 Naples, Italy
    Anastasia TSIANAKA , Institute of Interfacial Process Engineering and Plasma Technology IGVP, University of Stuttgart, Nobelstraße 12, 70569 Stuttgart, Germany
    Nicola ALESSIO, Department of Experimental Medicine, University of Campania “Luigi Vanvitelli”, Via L. De Crecchio 7, 80138 Naples, Italy
    Jana GRÜBEL , Institute of Interfacial Process Engineering and Plasma Technology IGVP, University of Stuttgart, Nobelstraße 12, 70569 Stuttgart, Germany
    Marcella CAMMAROTA, Department of Experimental Medicine, University of Campania “Luigi Vanvitelli”, Via L. De Crecchio 7, 80138 Naples, Italy
    Günter E.M. TOVAR, Institute of Interfacial Process Engineering and Plasma Technology IGVP, University of Stuttgart, Nobelstraße 12, 70569 Stuttgart, Germany
    Alexander SOUTHAN , Institute of Interfacial Process Engineering and Plasma Technology IGVP, University of Stuttgart, Nobelstraße 12, 70569 Stuttgart, Germany
    Chiara SCHIRALDI, Department of Experimental Medicine, University of Campania “Luigi Vanvitelli”, Via L. De Crecchio 7, 80138 Naples, Italy

    topicC-10 Osteoarticular
    person_pinValentina VASSALLO, Department of Experimental Medicine, University of Campania “Luigi Vanvitelli”, Via L. De Crecchio 7, 80138 Naples, Italy
    P10 - Osteoarticular tissue - 3D PRINTED BIORESORBABLE SCAFFOLDS FOR ARTICULAR CARTILAGE TISSUE ENGINEERING: A COMPARATIVE STUDY BETWEEN NEAT POLYCAPROLACTONE (PCL) AND POLY (LACTIDE-B-ETHYLENE GLYCOL) (PLA-PEG) BLOCK COPOLYMER Osteoarticular tissueUzuri URTAZA, Leartiker S.Coop.

    topicC-10 Osteoarticular
    person_pinUzuri URTAZA, Leartiker S.Coop.
    P11 - Osteoarticular tissue - Influence of low frequency electrical stimulation on osteoblast growth: Cellular effects via AC-conditioned liquids?Osteoarticular tissueMeike GENZOW, Department of Cell Biology, University Medical Center Rostock, 18057 Rostock, Germany
    Julius ZIMMERANN, Institute of General Electrical Engineering, University of Rostock, 18059 Rostock, Germany
    Thomas FREITAG, Department of Cell Biology, University Medical Center Rostock, 18057 Rostock, Germany
    Ursula VAN RIENEN, Institute of General Electrical Engineering, University of Rostock, 18059 Rostock, Germany / Interdisciplinary Faculty, University of Rostock, 18059 Rostock
    Barbara NEBE, Department of Cell Biology, University Medical Center Rostock, 18057 Rostock, Germany / Interdisciplinary Faculty, University of Rostock, 18059 Rostock
    Susanne STÄHLKE, Department of Cell Biology, University Medical Center Rostock, 18057 Rostock, Germany

    topicC-10 Osteoarticular
    person_pinMeike GENZOW, Department of Cell Biology, University Medical Center Rostock, 18057 Rostock, Germany
    P12 - Osteoarticular tissue - Gender differences of bone formation during fracture healing in response to magnesium implants: preliminary study in a rat external fixation model.Osteoarticular tissueYu SUN, Institute of Metallic Biomaterials, Helmholtz-Zentrum Hereon
    Heike HELMHOLZ, Institute of Metallic Biomaterials, Helmholtz-Zentrum Hereon
    Regine WILLUMEIT-RÖMER, Institute of Metallic Biomaterials, Helmholtz-Zentrum Hereon

    topicC-10 Osteoarticular
    person_pinRegine WILLUMEIT-RÖMER, Institute of Metallic Biomaterials, Helmholtz-Zentrum Hereon
    P13 - Osteoarticular tissue - Effect of Antioxidant on Molecular Weight of Bone Cement in Hydroxy-Radical Environment Osteoarticular tissueYukihiko UEHARA, Department of Mechanical Engineering, Kanazawa Institute of Technology
    Ryusuke UOZU, Department of Mechanical Engineering, Kanazawa Institute of Technology
    Noriyuki TAKANO, Integrated Technology Research Center of Medical Science and Engineering, Kanazawa Institute of Technology

    topicC-10 Osteoarticular
    person_pinYukihiko UEHARA, Department of Mechanical Engineering, Kanazawa Institute of Technology
    P14 - Osteoarticular tissue - Production of Tissue-Engineered Cartilage using Collagen Sponges and OA Knee Synovial MSCs Osteoarticular tissueChristel HENRIONNET, UMR7365 CNRS-UL IMoPA
    Kevin BOURGE, UMR7365 CNRS-UL IMoPA
    Paul NEYBECKER, UMR7365 CNRS-UL IMoPA
    Didier MAINARD, UMR7365 CNRS-UL IMoPA
    Laurent GALOIS, UMR7365 CNRS-UL IMoPA
    Damien LOEUILLE, UMR7365 CNRS-UL IMoPA
    Pierre GILLET, UMR7365 CNRS-UL IMoPA
    Astrid PINZANO, UMR7563 CNRS-UL IMoPA

    topicC-10 Osteoarticular
    person_pinDidier MAINARD, UMR7365 CNRS-UL IMoPA
    P15 - Osteoarticular tissue - MATERIAL-ASSISTED STRATEGIES FOR OSTEOCHONDRAL DEFECT REPAIROsteoarticular tissueConstance LESAGE, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France. HTL Biotechnology, 7 Rue Alfred Kastler, Javené, 35133, France
    Marianne LAFONT, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France.
    Pierre GUIHARD, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France.
    Pierre WEISS, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France.
    Jérôme GUICHEUX, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France.
    Vianney DELPLACE, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France.

    topicC-10 Osteoarticular
    person_pinConstance LESAGE, Université de Nantes, Oniris, CHU Nantes, INSERM, Regenerative Medicine and Skeleton, RMeS, UMR 1229, F-44000, France. HTL Biotechnology, 7 Rue Alfred Kastler, Javené, 35133, France
    P16 - Osteoarticular tissue - Bioadhesive Nanocoated Cell-Microaggregates for Treating Diffuse Cartilage LesionsOsteoarticular tissueDesiré VENEGAS BUSTOS, Bioforge, University of Valladolid CIBER-BBN, Paseo de Belén 19, Valladolid 47011, Spain
    Aurelio VEGA CASTRILLO, Servicio de traumatología, Hospital Clínico de Valladolid, Av. Ramón y Cajal 3, Valladolid 47003, Spain
    Matilde ALONSO, Bioforge, University of Valladolid CIBER-BBN, Paseo de Belén 19, Valladolid 47011, Spain
    José Carlos RODRÍGUEZ CABELLO, Bioforge, University of Valladolid CIBER-BBN, Paseo de Belén 19, Valladolid 47011, Spain

    topicC-10 Osteoarticular
    person_pinDesiré VENEGAS BUSTOS, Bioforge, University of Valladolid CIBER-BBN, Paseo de Belén 19, Valladolid 47011, Spain
    P1 - Wound healing - Multifunctional hydrogel-based patch for targeting inflammation and regeneration in chronic intestinal woundsWound healingMarco ARAÚJO, i3S - Instituto de Investigação e Inovação em Saúde, University of Porto, Porto, Portugal
    João SILVEIRA, i3S - Instituto de Investigação e Inovação em Saúde; FEUP – Faculdade de Engenharia da Universidade do Porto
    Aureliana SOUSA, i3S - Instituto de Investigação e Inovação em Saúde
    Mafalda BESSA-GONÇALVES, i3S - Instituto de Investigação e Inovação em Saúde
    Susana SANTOS, i3S - Instituto de Investigação e Inovação em Saúde; ICBAS - Instituto de Ciências Biomédicas Abel Salazar
    Cristina BARRIAS, i3S - Instituto de Investigação e Inovação em Saúde; ICBAS - Instituto de Ciências Biomédicas Abel Salazar

    topicC-12 Wound healing
    person_pinMarco ARAÚJO, i3S - Instituto de Investigação e Inovação em Saúde, University of Porto, Porto, Portugal
    P2 - Wound healing - Development of Intelligent Hydrogel-Based Burn Wound DressingsWound healingManon MINSART, Polymer Chemistry & Biomaterials Research Group, CMaC, Ghent University, Ghent, Belgium
    Nicolas DEROOSE, Polymer Chemistry & Biomaterials Research Group, CMaC, Ghent University
    Laurens PARMENTIER, Polymer Chemistry & Biomaterials Research Group, CMaC, Ghent University
    Sandra VAN VLIERBERGHE, Polymer Chemistry & Biomaterials Research Group, CMaC, Ghent University
    Arn MIGNON, Biomaterials and Tissue Engineering, Department of Materials Engineering, KU Leuven
    Peter DUBRUEL, Polymer Chemistry & Biomaterials Research Group, CMaC, Ghent University

    topicC-12 Wound healing
    person_pinManon MINSART, Polymer Chemistry & Biomaterials Research Group, CMaC, Ghent University, Ghent, Belgium
    P3 - Wound healing - Three Fungal Exopolysaccharides as New Biomaterials for Wound HealingWound healingMasoud HAMIDI, Université libre de Bruxelles (ULB), École polytechnique de Bruxelles – 3BIO-BioMatter, Avenue F.D. Roosevelt, 50 - CP 165/61, 1050 Brussels, Belgium
    Oseweuba Valentine OKORO, Université libre de Bruxelles (ULB), École polytechnique de Bruxelles – 3BIO-BioMatter, Avenue F.D. Roosevelt, 50 - CP 165/61, 1050 Brussels, Belgium
    Giuseppe IANIRI, Dipartimento Agricoltura, Ambiente e Alimenti, Università degli Studi del Molise, Campobasso, Italy
    Hafez JAFARI, Université libre de Bruxelles (ULB), École polytechnique de Bruxelles – 3BIO-BioMatter, Avenue F.D. Roosevelt, 50 - CP 165/61, 1050 Brussels, Belgium
    Khodabakhsh RASHIDI, Research Center of Oils and Fats, Research Institute for Health Technology, Kermanshah University of Medical Sciences, Kermanshah, Iran
    Saeed GHASEMI, Department of Medicinal Chemistry, School of Pharmacy, Guilan University of Medical Sciences, Rasht, Iran
    Raffaello CASTORIA, Dipartimento Agricoltura, Ambiente e Alimenti, Università degli Studi del Molise, Campobasso, Italy
    Davide PALMIERI, Dipartimento Agricoltura, Ambiente e Alimenti, Università degli Studi del Molise, Campobasso, Italy
    Cédric DELATTRE, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, Institut Pascal, F-63000 Clermont-Ferrand, France
    Guillaume PIERRE, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, Institut Pascal, F-63000 Clermont-Ferrand, France
    Mahta MIRZAEI, Université libre de Bruxelles (ULB), École polytechnique de Bruxelles – 3BIO-BioMatter, Avenue F.D. Roosevelt, 50 - CP 165/61, 1050 Brussels, Belgium
    Hadi SAMADIAN, Department of Molecular Medicine, School of Medicine, Hamadan University of Medical Sciences, Hamadan, Iran
    Amin SHAVANDI, Université libre de Bruxelles (ULB), École polytechnique de Bruxelles – 3BIO-BioMatter, Avenue F.D. Roosevelt, 50 - CP 165/61, 1050 Brussels, Belgium

    topicC-12 Wound healing
    person_pinMasoud HAMIDI, Université libre de Bruxelles (ULB), École polytechnique de Bruxelles – 3BIO-BioMatter, Avenue F.D. Roosevelt, 50 - CP 165/61, 1050 Brussels, Belgium
    P4 - Wound healing - Phytotherapeutics-Loaded Active Patch for Chronic Wound HealingWound healingAmey DUKLE, Centre for Biomaterials, Cellular and Molecular Theranostics, Vellore Institute of Technology, Vellore, Tamil Nadu, India
    Deniz ATILA, International Centre for Research on Innovative Bio-based Materials (ICRI-BioM)-International Research Agenda, Lodz University of Technology, Lodz, Poland
    Vignesh KUMARAVEL, International Centre for Research on Innovative Bio-based Materials (ICRI-BioM)-International Research Agenda, Lodz University of Technology, Lodz, Poland
    A. Joseph NATHANAEL, Centre for Biomaterials, Cellular and Molecular Theranostics, Vellore Institute of Technology, Vellore, Tamil Nadu, India

    topicC-12 Wound healing
    person_pinDeniz ATILA, International Centre for Research on Innovative Bio-based Materials (ICRI-BioM)-International Research Agenda, Lodz University of Technology, Lodz, Poland
    P5 - Wound healing - Electrified Microfluidic Scratch AssayWound healingSebastian SHANER, University of Freiburg
    Anna SAVELYEVA, University of Freiburg
    Anja KVARTUH, University of Freiburg
    José LEAL, University of Freiburg
    Nicole JEDRUSIK, University of Freiburg
    Maria ASPLUND, University of Freiburg

    topicC-12 Wound healing
    person_pinSebastian SHANER, University of Freiburg
    P6 - Wound healing - Supercritical CO2 Technology for the Fabrication of Silk Fibroin Aerogel Particles for Wound Healing and RegenerationWound healingBeatriz G. BERNARDES, Universidade Católica Portuguesa, CBQF - Centro de Biotecnologia e Química Fina – Laboratório Associado, Escola Superior de Biotecnologia, Porto, Portugal; Department of Pharmacology, Pharmacy and Pharmaceutical Technology, I+D Farma group (GI-1645), iMATUS and Health Research Institute of Santiago de Compostela (IDIS), Universidade de Santiago de Compostela, E-15782 Santiago de Compostela, Spain
    Sara BAPTITA-SILVA, Universidade Católica Portuguesa, CBQF - Centro de Biotecnologia e Química Fina – Laboratório Associado, Escola Superior de Biotecnologia, Porto, Portugal
    Carlos ILLANES-BORDOMÁS, Department of Pharmacology, Pharmacy and Pharmaceutical Technology, I+D Farma group (GI-1645), iMATUS and Health Research Institute of Santiago de Compostela (IDIS), Universidade de Santiago de Compostela, E-15782 Santiago de Compostela, Spain
    Rui MAGALHÃES, Universidade Católica Portuguesa, CBQF - Centro de Biotecnologia e Química Fina – Laboratório Associado, Escola Superior de Biotecnologia, Porto, Portugal
    Raquel COSTA, Instituto de Investigação e Inovação em Saúde, Universidade do Porto (i3S), Porto, Portugal; Department of Biomedicine, Biochemistry Unit, Faculdade de Medicina, Universidade do Porto, Porto, Portugal; Escola Superior de Saúde, Instituto Politécnico do Porto, Porto, Portugal
    Carlos GARCÍA-GONZALÉZ, Department of Pharmacology, Pharmacy and Pharmaceutical Technology, I+D Farma group (GI-1645), iMATUS and Health Research Institute of Santiago de Compostela (IDIS), Universidade de Santiago de Compostela, E-15782 Santiago de Compostela, Spain
    Ana L. OLIVEIRA, Universidade Católica Portuguesa, CBQF - Centro de Biotecnologia e Química Fina – Laboratório Associado, Escola Superior de Biotecnologia, Porto, Portugal

    topicC-12 Wound healing
    person_pinBeatriz G. BERNARDES, Universidade Católica Portuguesa, CBQF - Centro de Biotecnologia e Química Fina – Laboratório Associado, Escola Superior de Biotecnologia, Porto, Portugal; Department of Pharmacology, Pharmacy and Pharmaceutical Technology, I+D Farma group (GI-1645), iMATUS and Health Research Institute of Santiago de Compostela (IDIS), Universidade de Santiago de Compostela, E-15782 Santiago de Compostela, Spain
    P8 - Wound healing - Immunomodulatory Maresin-1 Loaded Zein Nanoparticles to Induce Pro-Regenerative MicroenvironmentsWound healingAna Beatriz SOUSA, Institute for Research and Innovation in Health, from University of Porto, Portugal

    topicC-12 Wound healing
    person_pinAna Beatriz SOUSA, Institute for Research and Innovation in Health, from University of Porto, Portugal
    P10 - Wound healing - Silica Dioxide Nanofiber Based Drug Delivery System for Wound HealingWound healingHana TOMÁNKOVÁ, Technical University of Liberec
    Miroslava RYSOVÁ, Technical University of Liberec

    topicC-12 Wound healing
    person_pinHana TOMÁNKOVÁ, Technical University of Liberec
    P11 - Wound healing - Investigation of an ex vivo fracture bone model and formulation of therapeutics to prevent infection and excessive necrosis post traumatic injuriesWound healingMiruna CHIPARA, University of Birmingham & Harvard University

    topicC-12 Wound healing
    person_pinMiruna CHIPARA, University of Birmingham & Harvard University
    P12 - Wound healing - Cell carriers suitable for culturing human corneal epithelial cells for the production of tissue-engineered human corneal epitheliumWound healingGaëtan LE-BEL, 1-Département d'ophtalmologie, Université Laval, CUO-recherche/LOEX, Centre de recherche du CHU de Québec - Université Laval, Québec, QC, Canada. 2-Département de chirurgie, Université Laval, Centre de recherche en organogénèse expérimentale de l’Université Laval/LOEX, Centre de recherche du CHU de Québec - Université Laval, Québec, QC, Canada.
    Pascale DESJARDINS, 1-Département d'ophtalmologie, Université Laval, CUO-recherche/LOEX, Centre de recherche du CHU de Québec - Université Laval, Québec, QC, Canada. 2-Département de chirurgie, Université Laval, Centre de recherche en organogénèse expérimentale de l’Université Laval/LOEX, Centre de recherche du CHU de Québec - Université Laval, Québec, QC, Canada.
    Christelle GROSS, 1-Département d'ophtalmologie, Université Laval, CUO-recherche/LOEX, Centre de recherche du CHU de Québec - Université Laval, Québec, QC, Canada. 2-Département de chirurgie, Université Laval, Centre de recherche en organogénèse expérimentale de l’Université Laval/LOEX, Centre de recherche du CHU de Québec - Université Laval, Québec, QC, Canada.
    Carina KOPPEN, 3-Department of Ophthalmology, University Hospital Antwerp, Antwerp, Belgium.
    May GRIFFITH, 4-Laboratoires Antoine Turmel Polyclinique de l'Hopital Maisonneuve-Rosemont Montreal, Québec, Canada
    Lucie GERMAIN, 1-Département d'ophtalmologie, Université Laval, CUO-recherche/LOEX, Centre de recherche du CHU de Québec - Université Laval, Québec, QC, Canada. 2-Département de chirurgie, Université Laval, Centre de recherche en organogénèse expérimentale de l’Université Laval/LOEX, Centre de recherche du CHU de Québec - Université Laval, Québec, QC, Canada.
    Sylvain GUÉRIN, 1-Département d'ophtalmologie, Université Laval, CUO-recherche/LOEX, Centre de recherche du CHU de Québec - Université Laval, Québec, QC, Canada. 2-Département de chirurgie, Université Laval, Centre de recherche en organogénèse expérimentale de l’Université Laval/LOEX, Centre de recherche du CHU de Québec - Université Laval, Québec, QC, Canada.

    topicC-12 Wound healing
    person_pinGaëtan LE-BEL, 1-Département d'ophtalmologie, Université Laval, CUO-recherche/LOEX, Centre de recherche du CHU de Québec - Université Laval, Québec, QC, Canada. 2-Département de chirurgie, Université Laval, Centre de recherche en organogénèse expérimentale de l’Université Laval/LOEX, Centre de recherche du CHU de Québec - Université Laval, Québec, QC, Canada.
    P13 - Wound healing - Development of novel wound dressing material composed of gelatin sponge and nanofiberWound healingShunsuke SHINODA, Doshisha University, Graduate School of Life and Medical Sciences, Kyoto, Japan
    Koji YAMAMOTO, Doshisha University, Department of Biomedical Engineering, Kyoto, Japan
    Yusuke MORITA, Doshisha University, Department of Biomedical Engineering, Kyoto, Japan

    topicC-12 Wound healing
    person_pinShunsuke SHINODA, Doshisha University, Graduate School of Life and Medical Sciences, Kyoto, Japan
    P15 - Wound healing - Mucoadhesive Injectable Hydrogel Enriched with Encapsulated Pro-healing Protein for Hard-to-heal Oral Wounds TreatmentWound healingZuzana KADLECOVÁ, Central European Institute of Technology, Brno University of Technology, Advanced Biomaterials Group
    Matej DZUROV, Central European Institute of Technology, Brno University of Technology, Advanced Biomaterials Group
    Klára LYSÁKOVÁ, Central European Institute of Technology, Brno University of Technology, Advanced Biomaterials Group
    Lucy VOJTOVÁ, Central European Institute of Technology, Brno University of Technology, Advanced Biomaterials Group

    topicC-12 Wound healing
    person_pinZuzana KADLECOVÁ, Central European Institute of Technology, Brno University of Technology, Advanced Biomaterials Group
    P16 - Wound healing - Compositional Heterogeneity in Pathological Mineralized TissuesWound healingCong SUI, Healthcare Technologies Institute, Institute of Translational Medicine, School of Chemical Engineering, University of Birmingham
    Richard L WILLIAMS, Healthcare Technologies Institute, Institute of Translational Medicine, School of Chemical Engineering, University of Birmingham
    Neil EISENSTEIN, School of Chemical Engineering, University of Birmingham
    Tom ROBINSON, Healthcare Technologies Institute, Institute of Translational Medicine, School of Chemical Engineering, University of Birmingham
    Liam GROVER, Healthcare Technologies Institute, Institute of Translational Medicine, School of Chemical Engineering, University of Birmingham

    topicC-12 Wound healing
    person_pinCong SUI, Healthcare Technologies Institute, Institute of Translational Medicine, School of Chemical Engineering, University of Birmingham
    P17 - Wound healing - Biodegradable wound dressing based on biopolymersWound healingHadda ZEBIRI, CIRIMAT, University of Paul Sabatier III, Toulouse, France
    Philippe LAVALLE , INSERM, University of de Strasbourg, Strasbourg, France
    Céline DES-COURTILS, Brothier
    Marilys BLANCHY, Rescoll
    Emmanuel FLAHAUT, CIRIMAT, University of Paul Sabatier III, Toulouse, France
    Emmanuel SURANITI, Rescoll
    Laura DUCIEL, Brothier
    Benjamin LEVY, INSERM, University of de Strasbourg, Strasbourg, France
    Emilien CHABRILLAC, University Institute of Cancer in Toulouse Oncopole, Toulouse, France
    Stéphane LACK, Brothier
    Agnès DUPRET-BORIES, University Institute of Cancer in Toulouse Oncopole, Toulouse, France
    Audrey TOURRETTE, CIRIMAT, University of Paul Sabatier III, Toulouse, France

    topicC-12 Wound healing
    person_pinHadda ZEBIRI, CIRIMAT, University of Paul Sabatier III, Toulouse, France
    P18 - Wound healing - Development of platelet lysate and collagen foams for tissue engineeringWound healingFahd TIBOURTINE, CIRIMAT, University of Toulouse, CNRS, INPT, UPS, Université Paul Sabatier, France
    Agnès DUPRET-BORIES, ENT and cervico-facial surgery, Claudius-Regaud Institute, IUCT Toulouse. France
    Philippe LAVALLE , INSERM UMR 1121, Université de Strasbourg, Franc
    Thibault CANCEILL, CIRIMAT, University of Toulouse, CNRS, INPT, UPS, Université Paul Sabatier, France
    Andréa MARFOGLIA, CIRIMAT, University of Toulouse, CNRS, INPT, UPS, Université Paul Sabatier, France
    Clementine AUBRY, ARNA, Université de Bordeaux, INSERM U1212, CNRS, Bordeaux, France
    Sophie CAZALBOU, CIRIMAT, University of Toulouse, CNRS, INPT, UPS, Université Paul Sabatier, France

    topicC-12 Wound healing
    person_pinFahd TIBOURTINE, CIRIMAT, University of Toulouse, CNRS, INPT, UPS, Université Paul Sabatier, France
    P20 - Wound healing - Iodine releasing antimicrobial wound dressings for burn wound healingWound healingArn MIGNON, Department of Materials Engineering, Campus Group T, KU Leuven, Leuven, Belgium
    Tom GHEYSENS, Department of Organic and Macromolecular Chemistry, Ghent University, Gent, Belgium
    Sander WALRAET, Department of Organic and Macromolecular Chemistry, Ghent University, Gent, Belgium
    Pieter TACK, Department of Chemistry, Ghent University, Gent, Belgium
    Petra RIGOLE, Laboratory of Pharmaceutical Microbiology, Ghent University, Gent, Belgium
    Tom COENYE, Laboratory of Pharmaceutical Microbiology, Ghent University, Gent, Belgium
    Laszlo VINCZE, Department of Chemistry, Ghent University, Gent, Belgium
    sandra VAN VLIERBERGHE, Department of Organic and Macromolecular Chemistry, Ghent University, Gent, Belgium
    Peter DUBRUEL, Department of Organic and Macromolecular Chemistry, Ghent University, Gent, Belgium

    topicC-12 Wound healing
    person_pinArn MIGNON, Department of Materials Engineering, Campus Group T, KU Leuven, Leuven, Belgium
    P2 - Scaffolds - Fabrication of 6-BromoIndirubin-3’-Oxime Incorporated Guanosine Diphosphate Crosslinked Chitosan Scaffolds to Promote Osteogenic Differentiation in Myoblastic C2C12 CellsScaffoldsCeline J. AGNES, Department of Biomedical Engineering, McGill University, Montreal, Quebec, Canada
    Adrien TAKADA, Institute of Parasitology, McGill University, Montreal, Quebec, Canada
    Monzur MURSHED, Faculty of Dentistry, McGill University, Montreal, Quebec, Canada, Shriner’s Hospital for Children, Montreal, Quebec, Canada
    Bettina M. WILLIE, Department of Biomedical Engineering, McGill University, Montreal, Quebec, Canada, Shriner’s Hospital for Children, Montreal, Quebec, Canada, Department of Pediatric Surgery, McGill University, Montreal, Quebec, Canada
    Maryam TABRIZIAN, Department of Biomedical Engineering, McGill University, Montreal, Quebec, Canada, Faculty of Dentistry, McGill University, Montreal, Quebec, Canada

    topicD-01 Scaffolds
    person_pinCeline J. AGNES, Department of Biomedical Engineering, McGill University, Montreal, Quebec, Canada
    P3 - Scaffolds - Hybrid Core-Shell Scaffolds for Bone Regeneration and a 3D Printing Approach to Tune their PropertiesScaffoldsChiara PASINI, Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy
    Luciana SARTORE, Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy
    Stefano PANDINI, Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy
    Giorgio RAMORINO, Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy

    topicD-01 Scaffolds
    person_pinChiara PASINI, Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy
    P4 - Scaffolds - Decellularisation of whole human condyles for osteochondral repairScaffoldsHalina NORBERTCZAK, School of Biomedical Sciences, Faculty of Biological Sciences, University of Leeds, Leeds, United Kingdom
    Eileen INGHAM, School of Biomedical Sciences, Faculty of Biological Sciences, University of Leeds, Leeds, United Kingdom
    Jennifer EDWARDS, School of Biomedical Sciences, Faculty of Biological Sciences, University of Leeds, Leeds, United Kingdom
    Paul ROONEY, NHS Blood and Transplant Tissue and Eye Services, Liverpool, United Kingdom
    Hazel FERMOR, School of Biomedical Sciences, Faculty of Biological Sciences, University of Leeds, Leeds, United Kingdom

    topicD-01 Scaffolds
    person_pinHazel FERMOR, School of Biomedical Sciences, Faculty of Biological Sciences, University of Leeds, Leeds, United Kingdom
    P5 - Scaffolds - 3D printed, anisotropic, and porous dense collagen hydrogels to model cardiac extracellular matrixScaffoldsMarie CAMMAN, Sorbonne Université, CNRS, UMR 7574, Laboratoire de Chimie de la Matière Condensée de Paris, F-75005 Paris, France/Sorbonne Université, Institut de Biologie Paris-Seine (IBPS), CNRS UMR 8256, Inserm ERL U1164, Biological Adaptation and Ageing, F-75005, Paris, France.
    Pierre JOANNE, Sorbonne Université, Institut de Biologie Paris-Seine (IBPS), CNRS UMR 8256, Inserm ERL U1164, Biological Adaptation and Ageing, F-75005, Paris, France.
    Alba MARCELLAN, Sciences et Ingénierie de la Matière Molle, ESPCI Paris, Université PSL, CNRS, Sorbonne Université, F-75005, Paris, France.
    Julie BRUN, Sciences et Ingénierie de la Matière Molle, ESPCI Paris, Université PSL, CNRS, Sorbonne Université, F-75005, Paris, France.
    Gervaise MOSSER, Sorbonne Université, CNRS, UMR 7574, Laboratoire de Chimie de la Matière Condensée de Paris, F-75005 Paris, France
    Onnik AGBULUT, Sorbonne Université, Institut de Biologie Paris-Seine (IBPS), CNRS UMR 8256, Inserm ERL U1164, Biological Adaptation and Ageing, F-75005, Paris, France.
    Christophe HÉLARY, Sorbonne Université, CNRS, UMR 7574, Laboratoire de Chimie de la Matière Condensée de Paris, F-75005 Paris, France

    topicD-01 Scaffolds
    person_pinMarie CAMMAN, Sorbonne Université, CNRS, UMR 7574, Laboratoire de Chimie de la Matière Condensée de Paris, F-75005 Paris, France/Sorbonne Université, Institut de Biologie Paris-Seine (IBPS), CNRS UMR 8256, Inserm ERL U1164, Biological Adaptation and Ageing, F-75005, Paris, France.
    P7 - Scaffolds - Modified alginates / plasma-derived fibrin hydrogels for skin engineeringScaffoldsAna MATESANZ, Department of Bioengineering and Aerospace Engineering, Universidad Carlos III de Madrid, Leganés, Spain; and Department of Electronic Technology, Universidad Carlos III de Madrid, Leganés, Spain
    Raúl SANZ, Department of Applied Macromolecular Chemistry, CSIC, Madrid, Spain
    Carlos ELVIRA, Department of Applied Macromolecular Chemistry, CSIC, Madrid, Spain
    Diego VELASCO, Department of Bioengineering and Aerospace Engineering, Universidad Carlos III de Madrid, Leganés, Spain
    Jose Luis JORCANO, Department of Bioengineering and Aerospace Engineering, Universidad Carlos III de Madrid, Leganés, Spain
    Pablo ACEDO, Department of Electronic Technology, Universidad Carlos III de Madrid, Leganés, Spain

    topicD-01 Scaffolds
    person_pinAna MATESANZ, Department of Bioengineering and Aerospace Engineering, Universidad Carlos III de Madrid, Leganés, Spain; and Department of Electronic Technology, Universidad Carlos III de Madrid, Leganés, Spain
    P9 - Scaffolds - Double-porosity 3D printed scaffolds to select mesenchymal stem cells from the bone marrow and induce cartilage regenerationScaffoldsSandra RAMOS-DÍEZ, (1) BioSmarTE lab, RPT Group, POLYMAT, University of the Basque Country UPV/EHU, Donostia/San Sebastián 20018, Guipúzcoa, Spain
    Sandra CAMARERO-ESPINOSA, (1) BioSmarTE lab, RPT Group, POLYMAT, University of the Basque Country UPV/EHU, Donostia/San Sebastián 20018, Guipúzcoa, Spain. (2) IKERBASQUE, Basque Foundation for Science, Bilbao, Spain

    topicD-01 Scaffolds
    person_pinSandra RAMOS-DÍEZ, (1) BioSmarTE lab, RPT Group, POLYMAT, University of the Basque Country UPV/EHU, Donostia/San Sebastián 20018, Guipúzcoa, Spain
    P10 - Scaffolds - Naproxen and indomethacin-conjugated antioxidant and antimicrobial peptide gels for chronic woundsScaffoldsMoumita HALDER, PhD Scholar
    Mukul NARULA, MSc
    Yashveer SINGH, Dr.

    topicD-01 Scaffolds
    person_pinMoumita HALDER, PhD Scholar
    P11 - Scaffolds - Ternary PLCL/Collagen Nanofiber Matrices Decorated with MXene to Enable Spontaneous Myogenic DifferentiationScaffoldsSeok Hyun LEE, Department of Cogno-Mechatronics Engineering, Pusan National University
    Moon Sung KANG, Department of Cogno-Mechatronics Engineering, Pusan National University
    Hee Jeong JANG, Department of Cogno-Mechatronics Engineering, Pusan National University
    Hyo Jung JO, Department of Cogno-Mechatronics Engineering, Pusan National University
    Ji Eun LEE, Department of Optics and Mechatronics Engineering, Pusan National University
    Seung Jo JEONG, Bio-IT Fusion Technology Research Institute, Pusan National University
    Jong Ho LEE, Daan Korea Corporation
    Dong-Wook HAN, Department of Cogno-Mechatronics Engineering, Pusan National University

    topicD-01 Scaffolds
    person_pinSeok Hyun LEE, Department of Cogno-Mechatronics Engineering, Pusan National University
    P12 - Scaffolds - Injectable and Functionalized Tough Double-network Hydrogels for Vocal Fold RepairScaffoldsSareh TAHERI, McGill University, Center for Interdisciplinary Research in Music Media and Technology
    Guangyu BAO, McGill University, Center for Interdisciplinary Research in Music Media and Technology
    Sepideh MOHAMMADI, McGill University, Center for Interdisciplinary Research in Music Media and Technology
    Hossein RAVANBAKHASH, McGill University, Center for Interdisciplinary Research in Music Media and Technology, National Research Council Canada
    Luc MONGEAU, McGill University, Center for Interdisciplinary Research in Music Media and Technology

    topicD-01 Scaffolds
    person_pinSareh TAHERI, McGill University, Center for Interdisciplinary Research in Music Media and Technology
    P13 - Scaffolds - 3D calcium silicophosphate scaffold: in vitro and in vivo responseScaffoldsPatricia ROS-TÁRRAGA, Institute of Bioengineering, Miguel Hernandez University,
    Carlos MARTINEZ, Instituto Murciano de Investigación Biosanitaria Virgen de la Arrixaca.
    Miguel Angel RODRÍGUEZ, Instituto de Cerámica y Vidrio, ICV-CSIC
    Piedad N. DE AZA, Institute of Bioengineering, Miguel Hernandez University

    topicD-01 Scaffolds
    person_pinPiedad N. DE AZA, Institute of Bioengineering, Miguel Hernandez University
    P14 - Scaffolds - 3D Systems with Tailored Mechanical Properties and Biomolecules Delivery in Gradient for Spatially-Controlled MSCs DifferentiationScaffoldsPaola APRILE, LVTS INSERM U1148, Université Paris Cité, Paris, France
    Ines DAOUADI, LVTS INSERM U1148, Université Paris Cité, Paris, France
    Didier LETOURNEUR, LVTS INSERM U1148, Université Paris Cité, Paris, France
    Teresa SIMON-YARZA, LVTS INSERM U1148, Université Paris Cité, Paris, France

    topicD-01 Scaffolds
    person_pinTeresa SIMON-YARZA, LVTS INSERM U1148, Université Paris Cité, Paris, France
    P15 - Scaffolds - Novel calcium carbonate-poly(vinyl alcohol) scaffolds for bone tissue engineeringScaffoldsJingyi XUE, Faculty of Dentistry, Oral and Craniofacial Sciences, King’s College London
    Neelam GURAV, Faculty of Dentistry, Oral and Craniofacial Sciences, King’s College London
    Sherif ELSHARKAWY, Faculty of Dentistry, Oral and Craniofacial Sciences, King’s College London
    Sanjukta DEB, Faculty of Dentistry, Oral and Craniofacial Sciences, King’s College London

    topicD-01 Scaffolds
    person_pinJingyi XUE, Faculty of Dentistry, Oral and Craniofacial Sciences, King’s College London
    P18 - Scaffolds - The use of nanofibers as 3D scaffolds for expansion and modulation of human mesenchymal stem cells: a comparison study to 2D cultureScaffoldsAlfred KYAMBADDE, Keele University UK

    topicD-01 Scaffolds
    person_pinAlfred KYAMBADDE, Keele University UK
    P19 - Scaffolds - A Biomimetic Tunable Scaffold to Align Glial Cells for Spinal Cord RegenerationScaffoldsSakthivel NAGARAJAN, ICGM, Université de Montpellier, CNRS, ENSCM
    Sébastien BLANQUER, ICGM, Université de Montpellier, CNRS, ENSCM
    Marie-Noëlle LABOUR, ICGM, Université de Montpellier, CNRS, ENSCM, EPHE

    topicD-01 Scaffolds
    person_pinMarie-Noëlle LABOUR, ICGM, Université de Montpellier, CNRS, ENSCM, EPHE
    P20 - Scaffolds - Degradation Behavior of 3D-printed Poly(L-lactide-co-glycolide) Scaffolds for Cartilage Tissue EngineeringScaffoldsAnushree GHOSH DASTIDAR, Queens University Belfast
    Susan A CLARKE, Queens University Belfast
    Eneko LANDA, Queens University Belfast
    Fraser BUCHANAN, Queens University Belfast
    Krishna MANDA, Queens University Belfast

    topicD-01 Scaffolds
    person_pinAnushree GHOSH DASTIDAR, Queens University Belfast
    P21 - Scaffolds - Investigating macrophages activation induced by internalisation of different biomaterials using flow cytometerScaffoldsIdris KALOKOH, Bowen Xie, Professor Ying Yang

    topicD-01 Scaffolds
    person_pinIdris KALOKOH, Bowen Xie, Professor Ying Yang
    P22 - Scaffolds - Bioactive methacrylate hyaluronic acid - Silicon doped Hydroxyapatite composites scaffolds for bone tissue regenerationScaffoldsRebecca PELLEGRINO, Università del Salento

    topicD-01 Scaffolds
    person_pinRebecca PELLEGRINO, Università del Salento
    P23 - Scaffolds - Development of a 3D polysaccharide porous membrane for the modelling of the outer blood retina barrier ScaffoldsChloé DUJARDIN, Université Paris Cité, INSERM U1148, Paris, France
    Paola APRILE, Université Paris Cité, INSERM U1148, Paris, France
    Walter HABELER, I-Stem, Institute for Stem Cell Therapy and Exploration of Monogenic Diseases, Corbeil-Essonnes, France
    Christelle MONVILLE, I-Stem, Institute for Stem Cell Therapy and Exploration of Monogenic Diseases, Corbeil-Essonnes, France
    Didier LETOURNEUR, Université Paris Cité, INSERM U1148, Paris, France
    Teresa SIMON-YARZA, Université Paris Cité, INSERM U1148, Paris, France

    topicD-01 Scaffolds
    person_pinChloé DUJARDIN, Université Paris Cité, INSERM U1148, Paris, France
    P24 - Scaffolds - Porcine islet macroencapsulation for the treatment of type I diabetes (T1D)ScaffoldsVictoria SARANGOVA, Leibniz-Institut für Polymerforschung Dresden e. V., Technische Universität Dresden (TUD)
    Carolin HELLER, Universitätsklinikum Carl Gustav Carus Dresden
    Petra B. WELZEL, Leibniz-Institut für Polymerforschung Dresden e. V.
    Barbara LUDWIG, Universitätsklinikum Carl Gustav Carus Dresden
    Carsten WERNER, Leibniz-Institut für Polymerforschung Dresden e. V.

    topicD-01 Scaffolds
    person_pinVictoria SARANGOVA, Leibniz-Institut für Polymerforschung Dresden e. V., Technische Universität Dresden (TUD)
    P25 - Scaffolds - Quality-By-Design Driven Development and Up-scaling of a Medical Device for the Guided Regeneration of Bone DefectsScaffoldsPaola APRILE, LVTS INSERM U1148, Université Paris Cité, Paris, France
    Rachida AID, LVTS INSERM U1148, Université Paris Cité, Paris, France
    Soraya LANOUAR, LVTS INSERM U1148, Université Paris Cité, Paris, France
    Laurent BIDAULT, SILTISS, Saint-Viance, France; SILAB, Saint-Viance, France
    Teresa SIMON-YARZA, LVTS INSERM U1148, Université Paris Cité, Paris, France
    Didier LETOURNEUR, LVTS INSERM U1148, Université Paris Cité, Paris, France; SILTISS, Saint-Viance, France

    topicD-01 Scaffolds
    person_pinTeresa SIMON-YARZA, LVTS INSERM U1148, Université Paris Cité, Paris, France
    P26 - Scaffolds - Design of hybrid polymer/peptide nanofibers for soft tissues regenerationScaffoldskarima BELABBES, IBMM
    Chloé FALCOZ, IBMM

    topicD-01 Scaffolds
    person_pinChloé FALCOZ, IBMM
    P28 - Scaffolds - Analyzing The Risk Of Calcification In Materials Used For In Situ Heart Valve Tissue EngineeringScaffoldsDewy VAN DER VALK, Eindhoven University of Technology
    Charlotte HOES, Eindhoven University of Technology
    Yunia RASENBERG, Eindhoven University of Technology
    Wojtek SZYMCZYK, Eindhoven University of Technology
    Anat AKIVA, Radboud University Medical Center, Nijmegen, Netherlands.
    Anthal SMITS, Eindhoven University of Technology
    Carlijn BOUTEN, Eindhoven University of Technology

    topicD-01 Scaffolds
    person_pinDewy VAN DER VALK, Eindhoven University of Technology
    P29 - Scaffolds - MC3T3-E1 Cells in Novel 3D Poly(Lactic Acid) (PLA) and Poly-4-Hydroxybutyrate (P4HB) Bioabsorbable Textile Scaffolds for Bone Tissue RegenerationScaffoldsFlavia CARONNA, Biomechanics Research Centre (BMEC), Biomedical Engineering, NUI Galway, Galway, Ireland; ITA GmbH, Aachen, Germany
    Skander LIMEM, Tepha Medical Inc. (now part of Becton & Dickinson) Lexington MA, United States of America
    Said RIZIK, Tepha Medical Inc. (now part of Becton & Dickinson) Lexington MA, United States of America
    Khoa DO, ITA GmbH, Aachen, Germany
    William RONAN, Biomechanics Research Centre (BMEC), Biomedical Engineering, NUI Galway, Galway, Ireland
    Eimear B. DOLAN, Biomechanics Research Centre (BMEC), Biomedical Engineering, NUI Galway, Galway, Ireland

    topicD-01 Scaffolds
    person_pinFlavia CARONNA, Biomechanics Research Centre (BMEC), Biomedical Engineering, NUI Galway, Galway, Ireland; ITA GmbH, Aachen, Germany
    P30 - Scaffolds - Tracheal engineering to the reconstruction of the larynxScaffoldsChristelle BERTSCH, Inserm UMR_S 1121

    topicD-01 Scaffolds
    person_pinChristelle BERTSCH, Inserm UMR_S 1121
    P31 - Scaffolds - In vivo evaluation in rat of a new biodegradable hybrid scaffold composed of hyaluronic acid-poly(ester-urea-urethane) for soft tissue engineeringScaffoldsWassim MANHAL, Saint Joseph University of Beirut, Faculty of Dental Medicine, Craniofacial Research Laboratory, Beirut, Lebanon
    Sylvie CHANGOTADE, Université Sorbonne Paris Nord, Unité de Recherche en Ingénierie Tissulaire (URIT), F-93000, Bobigny, France
    Karim SENNI, EBInnov, Ecole de Biologie Industrielle, F-95000, Cergy, France
    Carole CHAKAR, Saint Joseph University of Beirut, Faculty of Dental Medicine, Craniofacial Research Laboratory, Beirut, Lebanon
    Didier LUTOMSKI, Université Sorbonne Paris Nord, Unité de Recherche en Ingénierie Tissulaire (URIT), F-93000, Bobigny, France
    Géraldine ROHMAN, Université Sorbonne Paris Nord, Unité de Recherche en Ingénierie Tissulaire (URIT), F-93000, Bobigny, France
    Ronald YOUNES, Saint Joseph University of Beirut, Faculty of Dental Medicine, Craniofacial Research Laboratory, Beirut, Lebanon

    topicD-01 Scaffolds
    person_pinKarim SENNI, EBInnov, Ecole de Biologie Industrielle, F-95000, Cergy, France
    P32 - Scaffolds - Polydopamine-Modified Oxidized Alginate-Gelatin 3D Printing Scaffolds for Bone Tissue Engineering ApplicationScaffoldsFarnaz GHORBANI, Institute of Biomaterials, Department of Material Science and Engineering, University of Erlangen-Nuremberg, Cauerstraße 6, 91058 Erlangen, Germany.
    Minjoo KIM, Institute of Biomaterials, Department of Material Science and Engineering, University of Erlangen-Nuremberg, Cauerstraße 6, 91058 Erlangen, Germany.
    Mahshid MONAVARI, Institute of Biomaterials, Department of Material Science and Engineering, University of Erlangen-Nuremberg, Cauerstraße 6, 91058 Erlangen, Germany.
    Behafarid GHALANDARI, State Key Laboratory of Oncogenes and Related Genes, Institute for Personalized Medicine, School of Biomedical Engineering, Shanghai Jiao Tong University, Shanghai 200030, China.
    Aldo BOCCACCINI, Institute of Biomaterials, Department of Material Science and Engineering, University of Erlangen-Nuremberg, Cauerstraße 6, 91058 Erlangen, Germany.

    topicD-01 Scaffolds
    person_pinFarnaz GHORBANI, Institute of Biomaterials, Department of Material Science and Engineering, University of Erlangen-Nuremberg, Cauerstraße 6, 91058 Erlangen, Germany.
    P33 - Scaffolds - Freeze Dried Bone Scaffold (FDBS), the third generation of synthetic bone graft substitute designed as a moldable platform for bone tissue engineering strategiesScaffoldsCyril D'ARROS, INSERM, UMR 1229, Regenerative Medicine and Skeleton, ONIRIS, Université de Nantes, Nantes, France ; Biomatlante - Advanced Medical Solutions Group Plc, Vigneux-de-Bretagne, France
    Boris HALGAND, INSERM, UMR 1229, Regenerative Medicine and Skeleton, ONIRIS, Université de Nantes, Nantes, France ; PHU4 OTONN, CHU de Nantes, Nantes, France
    Olivier MALARD, INSERM, UMR 1229, Regenerative Medicine and Skeleton, ONIRIS, Université de Nantes, Nantes, France ; Service d’Oto-Rhino-Laryngologie et de Chirurgie Cervico-Faciale, PHU4 OTONN, CHU de Nantes, Nantes, France
    Pascal BORGET, Biomatlante - Advanced Medical Solutions Group Plc, Vigneux-de-Bretagne, France
    Guy DACULSI, INSERM, UMR 1229, Regenerative Medicine and Skeleton, ONIRIS, Université de Nantes, Nantes, France

    topicD-01 Scaffolds
    person_pinCyril D'ARROS, INSERM, UMR 1229, Regenerative Medicine and Skeleton, ONIRIS, Université de Nantes, Nantes, France ; Biomatlante - Advanced Medical Solutions Group Plc, Vigneux-de-Bretagne, France
    P34 - Scaffolds - Influence of Porosity of Gyroid-structured Implants on Bone and Vascular Ingrowth in Rat Calvarial Defect ScaffoldsGuoyan XIAN, B3OA UMR CNRS 7052 INSERM U1271, Université de Paris, Paris, France
    Baptiste CHARBONNIER, Nantes Université, INSERM, UMRS 1229, Nantes, France
    Morad BENSIDHOUM, B3OA UMR CNRS 7052 INSERM U1271, Université de Paris, Paris, France
    Esther POTIER, B3OA UMR CNRS 7052 INSERM U1271, Université de Paris, Paris, France
    David MARCHAT, Mines Saint-Etienne, Univ Lyon, Univ Jean Monnet, Etablissement Français du Sang, INSERM, U 1059 Sainbiose, 42023 Saint-Etienne France
    Delphine LOGEART-AVRAMOGLOU, B3OA UMR CNRS 7052 INSERM U1271, Université de Paris, Paris, France

    topicD-01 Scaffolds
    person_pinGuoyan XIAN, B3OA UMR CNRS 7052 INSERM U1271, Université de Paris, Paris, France
    P35 - Scaffolds - Controlled metal crumpling as an alternative to folding for the fabrication of nanopatterned meta-biomaterialsScaffoldsMahya GANJIAN, TU Delft
    Khashayar MODARESIFAR, TU Delft
    Amir A ZADPOOR, TU Delft

    topicD-01 Scaffolds
    person_pinMahya GANJIAN, TU Delft
    P36 - Scaffolds - Development and evaluation of 3D printed PCL/HANp/PEGDA scaffolds for bone regenerationScaffoldsAna Catarina SOUSA, Veterinary Clinics Department, Abel Salazar Biomedical Sciences Institute (ICBAS), Porto, Portugal / Animal Science Studies Centre (CECA), Agroenvironment, Technologies and Sciences Institute (ICETA), University of Porto (UP), Porto, Portugal
    Sara BISCAIA, Centre for Rapid and Sustainable Product Development (CDRSP), Polytechnic Institute of Leiria, Portugal
    Rui ALVITES, Veterinary Clinics Department, Abel Salazar Biomedical Sciences Institute (ICBAS), Porto, Portugal / Animal Science Studies Centre (CECA), Agroenvironment, Technologies and Sciences Institute (ICETA), University of Porto (UP), Porto, Portugal
    Mariana BRANQUINHO, Veterinary Clinics Department, Abel Salazar Biomedical Sciences Institute (ICBAS), Porto, Portugal / Animal Science Studies Centre (CECA), Agroenvironment, Technologies and Sciences Institute (ICETA), University of Porto (UP), Porto, Portugal
    Bruna LOPES, Veterinary Clinics Department, Abel Salazar Biomedical Sciences Institute (ICBAS), Porto, Portugal / Animal Science Studies Centre (CECA), Agroenvironment, Technologies and Sciences Institute (ICETA), University of Porto (UP), Porto, Portugal
    Patrícia SOUSA, Veterinary Clinics Department, Abel Salazar Biomedical Sciences Institute (ICBAS), Porto, Portugal / Animal Science Studies Centre (CECA), Agroenvironment, Technologies and Sciences Institute (ICETA), University of Porto (UP), Porto, Portugal
    Joana VALENTE, Centre for Rapid and Sustainable Product Development (CDRSP), Polytechnic Institute of Leiria, Portugal
    Margarida FRANCO, Centre for Rapid and Sustainable Product Development (CDRSP), Polytechnic Institute of Leiria, Portugal
    José Domingos SANTOS, Faculdade de Engenharia da Universidade do Porto (FEUP), Porto, Portugal
    Luís ATAYDE, Veterinary Clinics Department, Abel Salazar Biomedical Sciences Institute (ICBAS), Porto, Portugal / Animal Science Studies Centre (CECA), Agroenvironment, Technologies and Sciences Institute (ICETA), University of Porto (UP), Porto, Portugal
    Nuno ALVES, Centre for Rapid and Sustainable Product Development (CDRSP), Polytechnic Institute of Leiria, Portugal
    Ana Colette MAURÍCIO, Veterinary Clinics Department, Abel Salazar Biomedical Sciences Institute (ICBAS), Porto, Portugal / Animal Science Studies Centre (CECA), Agroenvironment, Technologies and Sciences Institute (ICETA), University of Porto (UP), Porto, Portugal

    topicD-01 Scaffolds
    person_pinAna Catarina SOUSA, Veterinary Clinics Department, Abel Salazar Biomedical Sciences Institute (ICBAS), Porto, Portugal / Animal Science Studies Centre (CECA), Agroenvironment, Technologies and Sciences Institute (ICETA), University of Porto (UP), Porto, Portugal
    P37 - Scaffolds - In vitro Behavior of Human Osteoblasts Cultured in Direct Foamed Titanium ScaffoldsScaffoldsCarolina OLIVER-URRUTIA, Central European Institute of Technology, Brno University of Technology
    Zuzana KOLEDOVA, Faculty of Medicine, Masaryk University
    Adelia KASHIMBETOVA, Central European Institute of Technology, Brno University of Technology
    Karel SLÁMECKA, Central European Institute of Technology, Brno University of Technology
    Ladislav CELKO, Central European Institute of Technology, Brno University of Technology
    Edgar MONTUFAR, Central European Institute of Technology, Brno University of Technology

    topicD-01 Scaffolds
    person_pinEdgar MONTUFAR, Central European Institute of Technology, Brno University of Technology
    P39 - Scaffolds - Injectable Gene Activated Matrix (GAM) microspheres as MSCs active carriers for cartilage repairScaffoldsJeremy SALVADOR, EPHE, PSL Research University, 75014 Paris, France - ICGM, Univ Montpellier, CNRS, ENSCM, Montpellier, France - IRMB, University of Montpellier, INSERM, Montpellier, France
    Jade BERTHELOT, EPHE, PSL Research University, 75014 Paris, France - ICGM, Univ Montpellier, CNRS, ENSCM, Montpellier, France
    Claire BONY, IRMB, University of Montpellier, INSERM, Montpellier, France
    Daniele NOEL , IRMB, University of Montpellier, INSERM, Montpellier, France
    Marie MORILLE, ICGM, Univ Montpellier, CNRS, ENSCM, Montpellier, France
    Emmanuel BELAMIE, EPHE, PSL Research University, 75014 Paris, France - ICGM, Univ Montpellier, CNRS, ENSCM, Montpellier, France

    topicD-01 Scaffolds
    person_pinEmmanuel BELAMIE, EPHE, PSL Research University, 75014 Paris, France - ICGM, Univ Montpellier, CNRS, ENSCM, Montpellier, France
    P40 - Scaffolds - 3D Printed Tubular Scaffolds with Adequate Mechanical Properties and a Dual Cell Seeding Strategy for Tracheal RegenerationScaffoldsLuis SORIANO, School of Pharmacy and Biomolecular Sciences, RCSI, Dublin, Ireland; Tissue Engineering Research Group, RCSI, Dublin, Ireland; SFI Centre for Research in Medical Devices (CÚRAM), NUI, Galway, Ireland
    Tehreem KHALID, School of Pharmacy and Biomolecular Sciences, RCSI, Dublin, Ireland; Tissue Engineering Research Group, RCSI, Dublin, Ireland
    Mark LEMOINE, Tissue Engineering Research Group, RCSI, Dublin, Ireland
    Ruairi P BRANNIGAN, Department of Chemistry, RCSI, Dublin, Ireland
    Andreas HEISE, Department of Chemistry, RCSI, Dublin, Ireland
    Cian O'LEARY, School of Pharmacy and Biomolecular Sciences, RCSI, Dublin, Ireland; Tissue Engineering Research Group, RCSI, Dublin, Ireland; SFI Centre for Research in Medical Devices (CÚRAM), NUI, Galway, Ireland
    Fergal J. O'BRIEN, Tissue Engineering Research Group, RCSI, Dublin, Ireland
    Sally-Ann CRYAN, School of Pharmacy and Biomolecular Sciences, RCSI, Dublin, Ireland; Tissue Engineering Research Group, RCSI, Dublin, Ireland; SFI Centre for Research in Medical Devices (CÚRAM), NUI, Galway, Ireland

    topicD-01 Scaffolds
    person_pinLuis SORIANO, School of Pharmacy and Biomolecular Sciences, RCSI, Dublin, Ireland; Tissue Engineering Research Group, RCSI, Dublin, Ireland; SFI Centre for Research in Medical Devices (CÚRAM), NUI, Galway, Ireland
    P41 - Scaffolds - Green antibacterial hemostatic spongesScaffoldsMaria Francesca DI FILIPPO, Department of Chemistry, University of Bologna, Bologna, Italy
    Valentina DI MATTEO, Department of Chemistry, University of Bologna, Bologna, Italy
    Silvia PANZAVOLTA, Department of Chemistry, University of Bologna, Bologna, Italy

    topicD-01 Scaffolds
    person_pinMaria Francesca DI FILIPPO, Department of Chemistry, University of Bologna, Bologna, Italy
    P42 - Scaffolds - Retina Implants based on Submicron Structured Silica Membranes as a Therapy Concept for Age-Related Macular Degeneration (AMD)ScaffoldsBastian CHRIST, Translational Center Regenerative Therapies (TLC-RT), Fraunhofer Institute for Silicate Research (ISC), Würzburg, Germany
    Christina FEY, Translational Center Regenerative Therapies (TLC-RT), Fraunhofer Institute for Silicate Research (ISC), Würzburg, Germany
    Tobias WEIGEL, Translational Center Regenerative Therapies (TLC-RT), Fraunhofer Institute for Silicate Research (ISC), Würzburg, Germany
    Ina MEISER, Fraunhofer Institute for Biomedical Engineering (IBMT), Sulzbach, Germany
    Kristina LACHMANN, Fraunhofer Institute for Surface Engineering and Thin Films (IST), Braunschweig, Germany
    Jörn PROBST, Translational Center Regenerative Therapies (TLC-RT), Fraunhofer Institute for Silicate Research (ISC), Würzburg, Germany
    Neubauer JULIA C., Fraunhofer Project Centre for Stem Cell Process Engineering (PZ-SPT), Würzburg, Germany & Fraunhofer Institute for Biomedical Engineering (IBMT), Sulzbach, Germany
    Sofia DEMBSKI, Translational Center Regenerative Therapies (TLC-RT), Fraunhofer Institute for Silicate Research (ISC), Würzburg, Germany

    topicD-01 Scaffolds
    person_pinBastian CHRIST, Translational Center Regenerative Therapies (TLC-RT), Fraunhofer Institute for Silicate Research (ISC), Würzburg, Germany
    P43 - Scaffolds - Melt-Electrowritten Scaffolds for an In Vitro Blood-Brain Barrier Model ApplicationScaffoldsMagdalena GLADYSZ, Groningen Research Institute of Pharmacy, University of Groningen, Groningen, Netherlands; Zernike Institute for Advanced Materials, University of Groningen, Groningen, Netherlands
    Marleen KAMPERMAN, Zernike Institute for Advanced Materials, University of Groningen, Groningen, Netherlands
    Marcus KOCH, INM - Leibniz Institute for New Materials, Saarbrücken, Germany
    Malgorzata WLODARCZYK-BIEGUN, Zernike Institute for Advanced Materials, University of Groningen, Groningen, Netherlands
    Anika NAGELKERKE, Groningen Research Institute of Pharmacy, University of Groningen, Groningen, Netherlands

    topicD-01 Scaffolds
    person_pinMagdalena GLADYSZ, Groningen Research Institute of Pharmacy, University of Groningen, Groningen, Netherlands; Zernike Institute for Advanced Materials, University of Groningen, Groningen, Netherlands
    P44 - Scaffolds - Fucoidan/Chitosan Hydrogels as Matrices for Sustained Delivery of Platelet-Rich Fibrin Containing Bioactive MoleculesScaffoldsKarina EGLE, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Riga, Latvia; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia
    Eva DOHLE, FORM, Frankfurt Oral Regenerative Medicine, Clinic for Maxillofacial and Plastic Surgery, Johann Wolfgang Goethe University, Frankfurt am Main, Germany
    Verena HOFFMANN, FORM, Frankfurt Oral Regenerative Medicine, Clinic for Maxillofacial and Plastic Surgery, Johann Wolfgang Goethe University, Frankfurt am Main, Germany
    Ilze SALMA, Institute of Stomatology, Riga Stradins University, Riga, Latvia
    Sarah AL-MAAWI, FORM, Frankfurt Oral Regenerative Medicine, Clinic for Maxillofacial and Plastic Surgery, Johann Wolfgang Goethe University, Frankfurt am Main, Germany
    Shahram GHANAATI, FORM, Frankfurt Oral Regenerative Medicine, Clinic for Maxillofacial and Plastic Surgery, Johann Wolfgang Goethe University, Frankfurt am Main, Germany
    Arita DUBNIKA, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Riga, Latvia; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia

    topicD-01 Scaffolds
    person_pinKarina EGLE, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Riga, Latvia; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia
    P45 - Scaffolds - Synthesis, characterization, and in vitro biocompatibility of Si-Ca-P multilayer scaffolds doped with Sr, Fe and Mg for tissue engineeringScaffoldsNayarit A. MATA, Institute of Bioengineering, Miguel Hernandez University, Avda. Universidad s/n, 03202, Elche, Spain
    Arango-Ospina MARCELA, Institute of Biomaterials, University of Erlangen-Nuremberg, Cauerstr. 6, 91058, Erlangen, Germany.
    Pablo VELASQUEZ, Institute of Bioengineering, Miguel Hernandez University, Avda. Universidad s/n, 03202, Elche, Spain.
    Angel MURCIANO, Department of Materials, Optical and Electronic Technology, Miguel Hernandez University, Avda. Universidad s/n, 03202, Elche, Spain.
    Aldo R. BOCCACCINI, Institute of Biomaterials, University of Erlangen-Nuremberg, Cauerstr. 6, 91058, Erlangen, Germany.
    Piedad N. DE AZA, Institute of Bioengineering, Miguel Hernandez University, Avda. Universidad s/n, 03202, Elche, Spain.

    topicD-01 Scaffolds
    person_pinPiedad N. DE AZA, Institute of Bioengineering, Miguel Hernandez University, Avda. Universidad s/n, 03202, Elche, Spain.
    P46 - Scaffolds - 3D CaP porous scaffolds with grooved surface topography for bone tissue engineeringScaffoldsEduardo SEBASTIAN, Instituto de Bioingeniería, Universidad Miguel Hernández, Avda. Universidad s/n, Elche, Alicante, 03202, Spain
    Angel MURCIANO, Departamento de Materiales, Óptica y Tecnología Electrónica, Universidad Miguel Hernández, Avda. Universidad s/n, Elche, Alicante, 03202, Spain
    Piedad N. DE AZA, Instituto de Bioingeniería, Universidad Miguel Hernández, Avda. Universidad s/n, Elche, Alicante, 03202, Spain
    Pablo VELASQUEZ, Instituto de Bioingeniería, Universidad Miguel Hernández, Avda. Universidad s/n, Elche, Alicante, 03202, Spain

    topicD-01 Scaffolds
    person_pinPiedad N. DE AZA, Instituto de Bioingeniería, Universidad Miguel Hernández, Avda. Universidad s/n, Elche, Alicante, 03202, Spain
    P48 - Scaffolds - Full-scale topology optimization of synthetic bone scaffoldsScaffoldsThijs SMIT, ETH Zurich
    Stijn KOPPEN, Delft University of Technology
    Stephen J. FERGUSON, ETH Zurich
    Benedikt HELGASON, ETH Zurich

    topicD-01 Scaffolds
    person_pinThijs SMIT, ETH Zurich
    P50 - Scaffolds - FTIR Spectroscopy and Thermally-Accelerated Ageing: A Tool to Predict in vitro Scaffold LifetimeScaffoldsCredson LANGUEH, Université Sorbonne Paris Nord - Unité de Recherche en Ingénierie Tissulaire
    Sylvie CHANGOTADE, Université Sorbonne Paris Nord - Unité de Recherche en Ingénierie Tissulaire
    Didier LUTOMSKI, Université Sorbonne Paris Nord - Unité de Recherche en Ingénierie Tissulaire
    Geraldine ROHMAN, Université Sorbonne Paris Nord - Unité de Recherche en Ingénierie Tissulaire

    topicD-01 Scaffolds
    person_pinGeraldine ROHMAN, Université Sorbonne Paris Nord - Unité de Recherche en Ingénierie Tissulaire
    P1 - Bioreactors - Perfusable Microvessel Substitutes Integrated in a Tailored Bioreactor Enable the Investigation of Chemotaxis in vitroBioreactorsMattis WACHENDÖRFER, Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
    Eleftheria PANTAZOGLOU, Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
    Horst FISCHER, Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany

    topicD-02 Bioreactors
    person_pinMattis WACHENDÖRFER, Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
    P2 - Bioreactors - A NOVEL BIOMIMETIC KNEE JOINT BIOREACTOR FOR THE IN VITRO REGENERATION OF OSTEOCHONDRAL LESIONSBioreactorsNoelia CAMPILLO, BRECA Health Care S.L, REGEMAT 3D S.L.
    Antonio TORRES, BRECA Health Care S.L, REGEMAT3D S.L.
    Sara MICÓ, REGEMAT 3D S.L.
    Carlos CHOCARRO-WRONA, Instituto de Biopatología y Medicina Regenerativa, Centro de Investigación Biomédica de la Universidad de Granada, Granada, Spain; Terapias Avanzadas: Diferenciación, Regeneración y Cáncer, Instituto de Investigación Biosanitaria, Granada, Spain
    Julia LOPEZ, Instituto de Biopatología y Medicina Regenerativa, Centro de Investigación Biomédica de la Universidad de Granada, Granada, Spain; Terapias Avanzadas: Diferenciación, Regeneración y Cáncer, Instituto de Investigación Biosanitaria, Granada, Spain
    Juan Antonio MARCHAL, Instituto de Biopatología y Medicina Regenerativa, Centro de Investigación Biomédica de la Universidad de Granada, Granada, Spain; Terapias Avanzadas: Diferenciación, Regeneración y Cáncer, Instituto de Investigación Biosanitaria, Granada, Spain
    José Manuel BAENA, BRECA Health Care S.L, REGEMAT 3D S.L.

    topicD-02 Bioreactors
    person_pinNoelia CAMPILLO, BRECA Health Care S.L, REGEMAT 3D S.L.
    P3 - Bioreactors - How hydrodynamics and species transport influence the 3D microenvironment of cells seeded in hydrogel scaffoldsBioreactorsMartial BANKOUÉ NTATÉ, LGPM, CentraleSupélec, Université Paris-Saclay
    Jérôme GRENIER, LGPM, CentraleSupélec, Université Paris-Saclay
    Soukaina EL HAJJ, LMPS, UMR CNRS 9026, CentraleSupélec, Université Paris-Saclay
    Magali DUPUY, LGPM, CentraleSupélec, Université Paris-Saclay
    Cyril BRETON, LGPM, CentraleSupélec, Université Paris-Saclay
    Rachida AID, LVTS, INSERM 1148, Université Paris Cité, Université Sorbonne Paris Nord
    Clément JOURNÉ, LVTS, INSERM 1148, Université Paris Cité, Université Sorbonne Paris Nord
    Robin SIADOUS, Laboratoire BIOTIS, Inserm U1026, Université de Bordeaux
    Jérôme LIGNERON, Laboratoire BIOTIS, Inserm U1026, Université de Bordeaux
    Joelle AMÉDÉE, Laboratoire BIOTIS, Inserm U1026, Université de Bordeaux
    Didier LETOURNEUR, LVTS, INSERM 1148, Université Paris Cité, Université Sorbonne Paris Nord
    Bertrand DAVID, LMPS, UMR CNRS 9026, CentraleSupélec, Université Paris-Saclay
    Hervé DUVAL, LGPM, CentraleSupélec, Université Paris-Saclay

    topicD-02 Bioreactors
    person_pinMartial BANKOUÉ NTATÉ, LGPM, CentraleSupélec, Université Paris-Saclay
    P4 - Bioreactors - micro-optofluidic devices for drug release characterisation in simulated, dynamic oral microenvironmentBioreactorsWilliam OATES, Department of Chemical Engineering, University of Manchester, Manchester, UK, M13 9PL
    Antonios ANASTASIOU, Department of Chemical Engineering, University of Manchester, Manchester, UK, M13 9PL

    topicD-02 Bioreactors
    person_pinWilliam OATES, Department of Chemical Engineering, University of Manchester, Manchester, UK, M13 9PL
    P5 - Bioreactors - Enabling Electrical Field Stimulation in Perfusion Bioreactor for Bone Craft SubstitutesBioreactorsFranziska ALT, TU Dresden
    Salman SALMAN, TU Dresden
    Poh Soo LEE, TU Dresden
    Benjamin KRUPPKE, TU Dresden

    topicD-02 Bioreactors
    person_pinFranziska ALT, TU Dresden
    P6 - Bioreactors - Co-culture of HUVECs and hMSCs in a Perfusion Bioreactor Ensures the Development of Viable Spheroids BioreactorsSoukaina EL HAJJ, LMPS, UMR CNRS 9026, CentraleSupélec, Université Paris-Saclay, Gif-sur-Yvette, France
    Martial BANKOUÉ NTATÉ, LGPM, CentraleSupélec, Université Paris-Saclay, Gif-sur-Yvette, France
    Rachida AID, LVTS, INSERM 1148, Université Paris Cité, Université Sorbonne Paris Nord, Paris, France
    Cyril BRETON, LGPM, CentraleSupélec, Université Paris-Saclay, Gif-sur-Yvette, France
    Robin SIADOUS, Laboratoire BIOTIS, INSERM U1026, Université de Bordeaux, Bordeaux, France
    Jerome LIGNERON, Laboratoire BIOTIS, INSERM U1026, Université de Bordeaux, Bordeaux, France
    Magali DUPUY, LGPM, CentraleSupélec, Université Paris-Saclay, Gif-sur-Yvette, France
    Herve DUVAL, LGPM, CentraleSupélec, Université Paris-Saclay, Gif-sur-Yvette, France
    Didier LETOURNEUR, LVTS, INSERM 1148, Université Paris Cité, Université Sorbonne Paris Nord, Paris, France
    Joelle AMEDEE, Laboratoire BIOTIS, INSERM U1026, Université de Bordeaux, Bordeaux, France
    Bertrand DAVID, LMPS, UMR CNRS 9026, CentraleSupélec, Université Paris-Saclay, Gif-sur-Yvette, France

    topicD-02 Bioreactors
    person_pinSoukaina EL HAJJ, LMPS, UMR CNRS 9026, CentraleSupélec, Université Paris-Saclay, Gif-sur-Yvette, France
    P7 - Bioreactors - Biocompatibility study of an innovative “Suspence” system for cell culture in suspension by evaluating cell viability and growthBioreactorsMiriam MERCO, Institute of Translational Pharmacology, National Research Council
    Di Benedetto DI BENEDETTO, Cellex srl, Rome, Italy
    Federica LIGUORI, Cellex srl, Rome, Italy
    Michele PISTILLO, Cellex srl, Rome, Italy
    Margherita SCAMARCIO, Cellex srl, Rome, Italy
    Giuseppe FALVO D’URSO LABATE, Cellex srl, Rome, Italy
    Antonella LISI, Institute of Translational Pharmacology, National Research Council
    Mario LEDDA, Institute of Translational Pharmacology, National Research Council

    topicD-02 Bioreactors
    person_pinMiriam MERCO, Institute of Translational Pharmacology, National Research Council
    P8 - Bioreactors - Designing the electrical stimulation chamber for in vitro tissue cultures BioreactorsAleksandra BENKO, AGH University of Science and Technology, Krakow, Poland
    Krzysztof PIETRYGA, AGH University of Science and Technology, Krakow, Poland; Kardio-Med Silesia, Zabrze, Poland
    Michal DZIADEK, AGH University of Science and Technology, Krakow, Poland; Department of Inorganic Chemistry, Faculty of Chemistry, Jagiellonian University, Krakow, Poland
    Marek STENCEL, AGH University of Science and Technology, Krakow, Poland
    Jacek NIZIOL, AGH University of Science and Technology, Krakow, Poland

    topicD-02 Bioreactors
    person_pinAleksandra BENKO, AGH University of Science and Technology, Krakow, Poland
    P9 - Bioreactors - Electrochemical Aspects of In Vitro Electrical Stimulation DevicesBioreactorsAndrés SÁNCHEZ PÉREZ, Instituto de Micro y Nanotecnología, IMN-CNM, CSIC
    BLANCA LIMONES AHIJÓN, Instituto de Micro y Nanotecnología, IMN-CNM, CSIC
    JOSÉ MIGUEL GARCÍA MARTÍN, Instituto de Micro y Nanotecnología, IMN-CNM, CSIC
    MARÍA UJUÉ GONZÁLEZ, Instituto de Micro y Nanotecnología, IMN-CNM, CSIC
    SAHBA MOBINI, Instituto de Micro y Nanotecnología, IMN-CNM, CSIC

    topicD-02 Bioreactors
    person_pinMARÍA UJUÉ GONZÁLEZ, Instituto de Micro y Nanotecnología, IMN-CNM, CSIC
    P2 - Modulation of vascularisation - A tubulogenesis assay to characterize the influence of hydroxyapatite-based ceramic properties on endothelial cellsModulation of vascularisationJulie USSEGLIO, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France
    Adeline DUMUR, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France
    Émeline RENAUDIE, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France
    Esther PAGÈS, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France
    Joel BRIE, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France
    Éric CHAMPION, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France
    Amandine MAGNAUDEIX, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France

    topicD-04 Modulation of vascularisation
    person_pinAmandine MAGNAUDEIX, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France
    P3 - Modulation of vascularisation - Endothelial cells behavior on copper- and silicon-substituted hydroxyapatite bioceramicsModulation of vascularisationArthur BRUNEL, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France
    Esther PAGÈS, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France
    Eric CHAMPION, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France
    Amandine MAGNAUDEIX, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France

    topicD-04 Modulation of vascularisation
    person_pinAmandine MAGNAUDEIX, Univ. Limoges, CNRS, Institut de Recherche sur Les Céramiques, UMR 7315, F-87000, Limoges, France
    P4 - Modulation of vascularisation - Biofabrication of vascularized constructs by iPSCs-derived endothelial cells bioprinting Modulation of vascularisationClarissa TOMASINA, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, The Netherlands
    Sandra CAMARERO-ESPINOSA, POLYMAT University of the Basque Country UPV/EHU Avenida Tolosa 72, Donostia/San Sebastián 20018, Gipuzkoa, Spain
    Lorenzo MORONI, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, The Netherlands

    topicD-04 Modulation of vascularisation
    person_pinClarissa TOMASINA, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, The Netherlands
    P5 - Modulation of vascularisation - Follow-up of the in vivo functionality of implanted pre-vascularized hydrogels.Modulation of vascularisationeirini CHATZOPOULOU, Universite de Paris, UR2496 Pathologies, Imagerie et Biotherapies Orofaciales et Plateforme Imagerie du Vivant, Montrouge, France
    Thomas GUILBERT, Institut Cochin, Universit? de Paris, Paris, France
    Guillaume RUCHER, Universite Paris Cite?, LVTS, INSERM U1148, F-75018, Paris, France; Universite?Paris Cite?, UMS 34 - FRIM, F-75018, Paris, France
    Jimmy ROSE, Nuclear Medicine Department, X. Bichat Hospital, APHP; Universite?Paris Cite?, LVTS, INSERM U1148, F-75018, Paris, France; Universite?Paris Cite?, UMS 34 - FRIM, F-75018, Paris, France
    Kilian HENRY, Universite de Paris, UR2496 Pathologies, Imagerie et Biotherapies Orofaciales et Plateforme Imagerie du Vivant, Montrouge, France
    Gilles RENAULT, Institut Cochin, INSERM U1016/CNRS UMR 8104, Universite? de Paris, Paris, France.
    Stephane GERMAIN, Center for Interdisciplinary Research in Biology (CIRB), College de France, CNRS UMR7241, INSERM U1050, Paris, France.
    Francois ROUZET, 7Nuclear Medicine Department, Hopital Bichat-Claude Bernard, AP-HP, Paris, France ; Universite de Paris and Inserm U1148, Paris, France.
    Catherine CHAUSSAIN, Universite?de Paris, UR2496 Pathologies, Imagerie et Biotherapies Orofaciales et Plateforme Imagerie du Vivant, Montrouge, France ; AP-HP, Services Odontologie, GH Paris Nord, Universite Paris Cite?, Paris, France.
    Laurent MULLER, Center for Interdisciplinary Research in Biology (CIRB), College de France, CNRS UMR7241, INSERM U1050, Paris, France.
    Caroline GORIN, Universite?de Paris, UR2496 Pathologies, Imagerie et Biotherapies Orofaciales et Plateforme Imagerie du Vivant, Montrouge, France ; AP-HP, Services Odontologie, GH Paris Est, Universite?Paris Cite?, Paris, France.

    topicD-04 Modulation of vascularisation
    person_pinCaroline GORIN, Universite?de Paris, UR2496 Pathologies, Imagerie et Biotherapies Orofaciales et Plateforme Imagerie du Vivant, Montrouge, France ; AP-HP, Services Odontologie, GH Paris Est, Universite?Paris Cite?, Paris, France.
    P6 - Modulation of vascularisation - A New Vascularized Skin Substitute Designed For Angiogenesis Exploration Modulation of vascularisationAdèle MAUROUX, Center for Interdisciplinary Research in Biology (CIRB), College de France, CNRS, INSERM, PSL Research University, Paris, France ; SILAB, R&D Department, Brive, France
    Sandrine GOFFLO, SILAB, R&D Department, Brive, France
    Yoann ATLAS, Center for Interdisciplinary Research in Biology (CIRB), College de France, CNRS, INSERM, PSL Research University, Paris, France
    Sylvie BORDES, SILAB, R&D Department, Brive, France
    Brigitte CLOSS, SILAB, R&D Department, Brive, France
    Florence RUGGIERO, Institut de Génomique Fonctionnelle de Lyon (IGFL), ENS de Lyon, CNRS, Univ Lyon 1, Lyon, France
    Laurent MULLER, Center for Interdisciplinary Research in Biology (CIRB), College de France, CNRS, INSERM, PSL Research University, Paris, France

    topicD-04 Modulation of vascularisation
    person_pinAdèle MAUROUX, Center for Interdisciplinary Research in Biology (CIRB), College de France, CNRS, INSERM, PSL Research University, Paris, France ; SILAB, R&D Department, Brive, France
    P1 - Mechanical & physico-chemical characterization - Poly(L-lactic acid) and Ceramic Composite Structures for Fully Resorbable Cranial ImplantsMechanical & physico-chemical characterizationAna GRZESZCZAK, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    Jonas ÅBERG, OssDsign, Uppsala, Sweden
    Cecilia PERSSON, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinAna GRZESZCZAK, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    P2 - Mechanical & physico-chemical characterization - A Collagen-Glycosaminoglycan Scaffold Coating Enhances the Bio-Lubrication of a 3D-Printed Framework for Cartilage repairMechanical & physico-chemical characterizationAustyn MATHESON, Tissue Engineering Research Group, Dept. of Anat.& R.M., Royal College of Surgeons in Ireland, Dublin, Ireland; Trinity Centre for Biomedical Engineering, Trinity College Dublin, Ireland Advanced Materials & Bioengineering Research Centre, RCSI and TCD, Dublin, Ireland Biomedical Engineering, School of Dental Medicine, UConn Health, USA
    Mark LEMOINE, The Royal College of Surgeons in Ireland
    Eamon SHEEHY, The Royal College of Surgeons in Ireland
    Tannin SCHMIDT, University of Connecticut, Health Campus
    Fergal O'BRIEN, The Royal College of Surgeons in Ireland

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinAustyn MATHESON, Tissue Engineering Research Group, Dept. of Anat.& R.M., Royal College of Surgeons in Ireland, Dublin, Ireland; Trinity Centre for Biomedical Engineering, Trinity College Dublin, Ireland Advanced Materials & Bioengineering Research Centre, RCSI and TCD, Dublin, Ireland Biomedical Engineering, School of Dental Medicine, UConn Health, USA
    P3 - Mechanical & physico-chemical characterization - Hyaluronic acid-crosslinked polyurethane composites modified with hydroxyapatite and graphene oxide for bone tissue engineeringMechanical & physico-chemical characterizationPatrycja DOMALIK-PYZIK, Department of Biomaterials and Composites, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Kraków, Poland
    Martyna GAWEL, Department of Biomaterials and Composites, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Kraków, Poland
    Kinga PIELICHOWSKA, Department of Biomaterials and Composites, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Kraków, Poland

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinPatrycja DOMALIK-PYZIK, Department of Biomaterials and Composites, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Kraków, Poland
    P4 - Mechanical & physico-chemical characterization - Physicochemical characterization of biodegradable composite materials based on poly(ethylene succinate) and hemp fibersMechanical & physico-chemical characterizationIouliana CHRYSAFI, Department of Physics, Aristotle University of Thessaloniki, Thessaloniki, Greece
    Eleftheria XANTHOPOULOU, Department of Chemistry, Aristotle University of Thessaloniki, Thessaloniki, Greece
    Alexandra ZAMPOULIS, Department of Chemistry, Aristotle University of Thessaloniki, Thessaloniki, Greece
    Konstantinos CHRYSAFIS, Department of Physics, Aristotle University of Thessaloniki, Thessaloniki, Greece

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinKonstantinos CHRYSAFIS, Department of Physics, Aristotle University of Thessaloniki, Thessaloniki, Greece
    P5 - Mechanical & physico-chemical characterization - Characterization of new block PLA-b-PHSu copolymers for medical applicationsMechanical & physico-chemical characterizationIouliana CHRYSAFI, Department of Physics, Aristotle University of Thessaloniki, Thessaloniki, Greece
    Dimitrios N. BIKIARIS, Department of Chemistry, Aristotle University of Thessaloniki, Thessaloniki, Greece

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinIouliana CHRYSAFI, Department of Physics, Aristotle University of Thessaloniki, Thessaloniki, Greece
    P6 - Mechanical & physico-chemical characterization - Mechanical Properties of Thermal and UV Polymerized Graphene-Reinforced Acrylic Resin: Effect of Post-treatment on Samples Obtained by StereolithographyMechanical & physico-chemical characterizationSara LOPEZ DE ARMENTIA HERNANDEZ, Institute for Research in Technology/Mechanical Engineering Dept., Universidad Pontificia Comillas, Madrid, Spain
    Yolanda BALLESTEROS, Institute for Research in Technology/Mechanical Engineering Dept., Universidad Pontificia Comillas, Madrid, Spain
    Juan Carlos DEL REAL, Institute for Research in Technology/Mechanical Engineering Dept., Universidad Pontificia Comillas, Madrid, Spain
    Nicholas DUNNE, School of Mechanical and Manufacturing Engineering, Dublin City University, Dublin, Ireland
    Eva PAZ, Institute for Research in Technology/Mechanical Engineering Dept., Universidad Pontificia Comillas, Madrid, Spain

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinSara LOPEZ DE ARMENTIA HERNANDEZ, Institute for Research in Technology/Mechanical Engineering Dept., Universidad Pontificia Comillas, Madrid, Spain
    P7 - Mechanical & physico-chemical characterization - Development of empirical hepatic biomechanical models through experimental characterization of porcine and bovine liversMechanical & physico-chemical characterizationGiuseppe GUAGLIANO, Department of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, Milan, Italy
    Stefano TAGLIABUE, Department of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, Milan, Italy
    Paola PETRINI, Department of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, Milan, Italy
    Francesco BRIATICO-VANGOSA, Department of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, Milan, Italy

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinGiuseppe GUAGLIANO, Department of Chemistry, Materials, and Chemical Engineering "G. Natta", Politecnico di Milano, Milan, Italy
    P8 - Mechanical & physico-chemical characterization - Mechanical and surface characterization of Drug Coated BalloonsMechanical & physico-chemical characterizationDeepthishre GUNASHEKAR, LaBS, Department of Chemistry, Material and Chemical Engineering ‘Giulio Natta’, Politecnico di Milano, Italy
    Dario GASTALDI, LaBS, Department of Chemistry, Material and Chemical Engineering ‘Giulio Natta’, Politecnico di Milano, Italy
    Giancarlo PENNATI, LaBS, Department of Chemistry, Material and Chemical Engineering ‘Giulio Natta’, Politecnico di Milano, Italy
    Pasquale VENA, LaBS, Department of Chemistry, Material and Chemical Engineering ‘Giulio Natta’, Politecnico di Milano, Italy

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinDeepthishre GUNASHEKAR, LaBS, Department of Chemistry, Material and Chemical Engineering ‘Giulio Natta’, Politecnico di Milano, Italy
    P9 - Mechanical & physico-chemical characterization - INVESTIGATING THE REINFORCEMENT OF PLLA WITH WS2NT FOR CARDIOVASCULAR STENT APPLICATIONSMechanical & physico-chemical characterizationJudith CAMERON, Queen's University Belfast
    Gary MENARY, Queen's University Belfast
    Alex LENNON, Queen's University Belfast

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinJudith CAMERON, Queen's University Belfast
    P10 - Mechanical & physico-chemical characterization - Hyaluronan Size beside Physico-chemical Properties affect Stability and Biological Features: Characterization Of A Wide Range Of Increasing Molecular Weight FamiliesMechanical & physico-chemical characterizationCeleste DI MEO, Università degli Studi della Campania "Luigi Vanvitelli"
    Antonietta STELLAVATO, Università degli Studi della Campania "Luigi Vanvitelli"
    Annalisa LA GATTA, Università degli Studi della Campania "Luigi Vanvitelli"
    Chiara SCHIARALDI, Università degli Studi della Campania "Luigi Vanvitelli"

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinCeleste DI MEO, Università degli Studi della Campania "Luigi Vanvitelli"
    P11 - Mechanical & physico-chemical characterization - Characterization of Elastin-like Recombinamer-Based Membranes produced at the Interface of Two Immiscible Liquids by Click ChemistryMechanical & physico-chemical characterizationDiana JUANES GUSANO, GIR BIOFORGE- University of Valladolid
    Miguel GONZÁLEZ-PÉREZ, GIR BIOFORGE- University of Valladolid
    Mercedes SANTOS, GIR BIOFORGE- University of Valladolid
    Matilde ALONSO, GIR BIOFORGE- University of Valladolid
    José Carlos RODRÍGUEZ CABELLO, GIR BIOFORGE- University of Valladolid

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinDiana JUANES GUSANO, GIR BIOFORGE- University of Valladolid
    P13 - Mechanical & physico-chemical characterization - Effect of Sterilization on Rheological and Physicochemical Properties of ?-Polylysine/Hyaluronic Acid HydrogelsMechanical & physico-chemical characterizationArtemijs SCEGLOVS, 1. Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU 2. Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia
    Kristine SALMA-ANCANE, 1. Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU 2. Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinArtemijs SCEGLOVS, 1. Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU 2. Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia
    P14 - Mechanical & physico-chemical characterization - 3D bioartificial stretchable scaffolds for an in vitro model of fibrotic cardiac tissueMechanical & physico-chemical characterizationFrancesca TIVANO, Politecnico di Torino
    Mattia SPEDICATI, Politecnico di Torino
    Alice ZOSO, Politecnico di Torino
    Mario LAVELLA, Università degli studi di Bergamo
    Irene CARMAGNOLA, Politecnico di Torino
    Valeria CHIONO, Politecnico di Torino

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinValeria CHIONO, Politecnico di Torino
    P15 - Mechanical & physico-chemical characterization - Mechanical and structural characterization of a poly(ethylene terephtalate) mesh impregnated by a resin composite intended as adhesive bone patch fixation.Mechanical & physico-chemical characterizationGuillaume PATT-LAFITTE, Mines de Saint-Etienne, INSERM, U1059 SAINBIOSE
    Daniel HUTCHINSON, Royal Institute of Technology, Division of coating technology
    Michael MALKOCH, Royal Institute of Technology, Division of coating technology
    David EGLIN, Mines de Saint-Etienne, INSERM, U1059 SAINBIOSE

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinGuillaume PATT-LAFITTE, Mines de Saint-Etienne, INSERM, U1059 SAINBIOSE
    P16 - Mechanical & physico-chemical characterization - Novel Polyester-based Biomaterials for the Design of Tissue Engineering Scaffold by Additive Manufacturing TechnologiesMechanical & physico-chemical characterizationArianna GRIVET-BRANCOT, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy; Department of Surgical Sciences, Università di Torino, Torino, Italy
    Syed Mohammad Daniel SYED MOHAMED, Department of Materials Science and Engineering, University of Sheffield, Sheffield, United Kingdom
    Monica BOFFITO, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy
    Ipsita ROY, Department of Materials Science and Engineering, University of Sheffield, Sheffield, United Kingdom
    Gianluca CIARDELLI, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinArianna GRIVET-BRANCOT, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy; Department of Surgical Sciences, Università di Torino, Torino, Italy
    P17 - Mechanical & physico-chemical characterization - Optimized Functionalization of a Titanium Alloy Surface with the Antimicrobial Peptide Nisin Mechanical & physico-chemical characterizationMari Sofia LALLUKKA, Politecnico di Torino
    Virginia Alessandra GOBBO, Tampere University
    Francesca GAMNA, Politecnico di Torino
    Jacopo BARBERI , Politecnico di Torino
    Silvia SPRIANO, Politecnico di Torino

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinMari Sofia LALLUKKA, Politecnico di Torino
    P18 - Mechanical & physico-chemical characterization - Surface-protein interactions on additively manufactured CoCr alloy for biomedical applicationMechanical & physico-chemical characterizationAnna ZIEBOWICZ, Silesian University of Technology, Department of Biomaterials and Medical Device Engineering
    Thomas LUXBACHER, Anton Paar GmbH
    Timo MÜLLER, Anton Paar GmbH
    Kamil KOSIEL, Lukasiewicz Research Network-Institute of Microelectronics and Photonics
    Marta KIEL-JAMROZIK, Silesian University of Technology, Department of Biomaterials and Medical Device Engineering
    Zbigniew PASZENDA, Silesian University of Technology, Department of Biomaterials and Medical Device Engineering

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinThomas LUXBACHER, Anton Paar GmbH
    P19 - Mechanical & physico-chemical characterization - Designing PEG-Peptide Copolymer Hydrogel for Biomedical Applications Mechanical & physico-chemical characterizationAndong LIU, The University of Manchester
    Lu-shin WONG , The University of Manchester
    Aline MILLER, The University of Manchester
    Alberto SAIANI, The University of Manchester

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinAndong LIU, The University of Manchester
    P20 - Mechanical & physico-chemical characterization - Fabrication of Hyaluronan-based Matrices, Functionalized with Laminin Derived Peptides, to Sustain Cellular Adherence and Axonal Growth in Bone Regeneration ApplicationsMechanical & physico-chemical characterizationQuentin MULLER, Univ. Bordeaux, INSERM, BIOTIS, U1026, F-33000, Bordeaux, France
    Romane JOSSELIN, Univ. Bordeaux, CNRS, Bordeaux INP, LCPO, UMR 5629, Pessac, F-33600, France
    Daphne VAN DER HEIDE, AO Research Institute Davos, Clavadelerstrasse 8, 7270 Davos Platz, Switzerland
    Jean-François LE-MEINS, Univ. Bordeaux, CNRS, Bordeaux INP, LCPO, UMR 5629, Pessac, F-33600, France
    Bertrand GARBAY, Univ. Bordeaux, CNRS, Bordeaux INP, LCPO, UMR 5629, Pessac, F-33600, France
    Hugo DE OLIVEIRA, Univ. Bordeaux, INSERM, BIOTIS, U1026, F-33000, Bordeaux, France
    Matteo D'ESTE, AO Research Institute Davos, Clavadelerstrasse 8, 7270 Davos Platz, Switzerland
    Joëlle AMÉDÉE, Univ. Bordeaux, INSERM, BIOTIS, U1026, F-33000, Bordeaux, France

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinQuentin MULLER, Univ. Bordeaux, INSERM, BIOTIS, U1026, F-33000, Bordeaux, France
    P22 - Mechanical & physico-chemical characterization - Dissolving Microneedle Arrays: The Effects of Drug Incorporation on Physiochemical PropertiesMechanical & physico-chemical characterizationElliot CROFT, University of Liverpool

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinElliot CROFT, University of Liverpool
    P23 - Mechanical & physico-chemical characterization - The Effect of Hydroxyapatite Particle Shape on Hyalectin Hydrogel Augmentation of Screws in Cancellous BoneMechanical & physico-chemical characterizationYijun ZHOU, Uppsala University
    Ayan SAMANTA, Uppsala University
    Philip PROCTER, Uppsala University
    Cecilia PERSSON, Uppsala University

    topicE-01 Biomaterials mechanical & physico-chemical characterization
    person_pinYijun ZHOU, Uppsala University
    P24 - Mechanical & physico-chemical characterization - Multibody Kinematics to Design Shape-Morphing Mechanical Meta-BiomaterialsMechanical & physico-chemical characterizationPier DE JONG, Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Delft, The Netherlands
    A.L. SCHWAB, Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Delft, The Netherlands
    Mohammad J. MIRZAALI, Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Delft, The Netherlands
    Amir. A ZADPOOR, Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Delft, The Netherlands

    topicE-02 Modelling of materials properties (in silico testing)
    person_pinPier DE JONG, Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Delft, The Netherlands
    P1 - Biomaterial imaging - Polymeric Nanoparticles Targeting Glycans in Gastric Cancer Cells Under Live Flow ConditionsBiomaterial imagingFrancisca DINIZ, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal; ICBAS- Institute of Biomedical Sciences of Abel Salazar, University of Porto, Portugal
    Maria AZEVEDO, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal
    Flávia SOUSA, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal
    Hugo OSÓRIO, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal
    Diana CAMPOS, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal
    Paula SAMPAIO, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal
    Joana GOMES, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal
    Bruno SARMENTO, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal
    Celso A. REIS, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal

    topicE-03 Biomaterial imaging
    person_pinFrancisca DINIZ, i3S- Institute for Research and Innovation in Health, University of Porto, Portugal; ICBAS- Institute of Biomedical Sciences of Abel Salazar, University of Porto, Portugal
    P2 - Biomaterial imaging - X-ray phase-contrast micro-tomography for tissue models and bio-materials characterizationBiomaterial imagingElena LONGO, Elettra-Sincrotrone Trieste S.C.p.A., Trieste, Italy
    Adriano CONTILLO, Elettra-Sincrotrone Trieste S.C.p.A., Trieste, Italy
    Lorenzo D’AMICO, Elettra-Sincrotrone Trieste S.C.p.A., Trieste, Italy; Dipartimento di Fisica, Università degli Studi di Trieste, Trieste, Italy
    Giulia SACCOMANO, Elettra-Sincrotrone Trieste S.C.p.A., Trieste, Italy; Dipartimento di Ingegneria e Architettura, Università degli Studi di Trieste, Trieste, Italy
    Giuliana TROMBA, Elettra-Sincrotrone Trieste S.C.p.A., Trieste, Italy

    topicE-03 Biomaterial imaging
    person_pinElena LONGO, Elettra-Sincrotrone Trieste S.C.p.A., Trieste, Italy
    P3 - Biomaterial imaging - Comparative fluid permeability study of human tali following nanofracture, microfracture and fine wire drilling, using microCT analysisBiomaterial imagingJames WARREN, University of Leeds
    Ahranee CARDEN, University of Leeds
    Mark FARNDON, Harrogate and District NHS Foundation Trust
    Claire BROCKETT, University of Leeds

    topicE-03 Biomaterial imaging
    person_pinJames WARREN, University of Leeds
    P4 - Biomaterial imaging - Anosteocytic and osteocytic bones have different water permeabilityBiomaterial imagingAndreia SOUSA DA SILVEIRA, Department for Restorative and Preventive Dentistry, Charité-Universitaetsmedizin, Berlin, Germany
    Nikolay KARDJILOV, Institute of Applied Materials, Helmholtz Centre for Materials and Energy, Berlin, Germany
    Henning MARKÖTTER, Bundesanstalt für Materialforschung und -Prüfung (BAM), Berlin, German
    Elena LONGO, Institute of Materials Physics, Helmholtz-Zentrum Hereon, Geesthacht, Germany
    Imke GREVING, Institute of Materials Physics, Helmholtz-Zentrum Hereon, Geesthacht, Germany
    Ron SHAHAR, Koret School of Veterinary Medicine, The Hebrew University of Jerusalem, Rehovot, Israel
    Paul ZASLANSKY, Department for Restorative and Preventive Dentistry, Charité-Universitaetsmedizin, Berlin, Germany

    topicE-03 Biomaterial imaging
    person_pinAndreia SOUSA DA SILVEIRA, Department for Restorative and Preventive Dentistry, Charité-Universitaetsmedizin, Berlin, Germany
    P5 - Biomaterial imaging - Insight by in situ TEM into the nucleation and crystallization processes of calcium phosphate nanoparticlesBiomaterial imagingGisele DALMONICO, National Center for Research in Energy and Materials
    Marcos FARINA, Institute of Biomedical Sciences, Federal University of Rio de Janeiro, Brazil
    Dris IHIAWAKRIM, Institut de Physique et Chimie des Matériaux de Strasbourg
    Nathaly ORTIZ, Institut de Physique et Chimie des Matériaux de Strasbourg
    Ovidiu ERSEN, Institut de Physique et Chimie des Matériaux de Strasbourg
    Andre ROSSI, Brazilian Center for Research in Physics

    topicE-03 Biomaterial imaging
    person_pinGisele DALMONICO, National Center for Research in Energy and Materials
    Andre ROSSI, Brazilian Center for Research in Physics
    P7 - Biomaterial imaging - Quality of newly formed bone and Biphasic Calcium Phosphate resorption in in vivo rabbit study, the difficulty to use the correct thresholding level with microcomputed tomography analysisBiomaterial imagingCyril D'ARROS, INSERM, UMR 1229, Regenerative Medicine and Skeleton, ONIRIS, Université de Nantes, Nantes, France ; Biomatlante - Advanced Medical Solutions Group Plc, Vigneux-de-Bretagne, France
    Sylvain CATROS, Univ Bordeaux, INSERM U1026, BIOTIS Bioingénierie tissulaire, CHU Bordeaux, F-33000 Bordeaux, France ; Service de Chirurgie Orale, Hôpital Pellegrin, CHU de Bordeaux, Bordeaux, France
    Joëlle VEZIERS, INSERM, UMR 1229, Regenerative Medicine and Skeleton, ONIRIS, Université de Nantes, Nantes, France ; UFR Odontologie, Université de Nantes, France ; INSERM, UMS 016, CNRS 3556, Structure Fédérative de Recherche François Bonamy, SC3M Facility, CHU de Nantes, Université de Nantes, Nantes, France ; PHU4 OTONN, CHU de Nantes, Nantes, France
    Thierry ROUILLON, INSERM, UMR 1229, Regenerative Medicine and Skeleton, ONIRIS, Université de Nantes, Nantes, France ; 5UFR Odontologie, Université de Nantes, France
    Jean-Christophe FRICAIN, Univ Bordeaux, INSERM U1026, BIOTIS Bioingénierie tissulaire, CHU Bordeaux, F-33000 Bordeaux, France ; Service de Chirurgie Orale, Hôpital Pellegrin, CHU de Bordeaux, Bordeaux, France
    Marlène DURAND, Univ Bordeaux, INSERM U1026, BIOTIS Bioingénierie tissulaire, CHU Bordeaux, F-33000 Bordeaux, France ; CIC1401, CHU Bordeaux, 33000 Bordeaux, France ; CIC1401, INSERM, Univ Bordeaux, 33000 Bordeaux, France
    Olivier MALARD, INSERM, UMR 1229, Regenerative Medicine and Skeleton, ONIRIS, Université de Nantes, Nantes, France ; Service d’Oto-Rhino-Laryngologie et de Chirurgie Cervico-Faciale, PHU4 OTONN, CHU de Nantes, Nantes, France
    Pascal BORGET, Biomatlante - Advanced Medical Solutions Group Plc, Vigneux-de-Bretagne, France
    Guy DACULSI, INSERM, UMR 1229, Regenerative Medicine and Skeleton, ONIRIS, Université de Nantes, Nantes, France

    topicE-03 Biomaterial imaging
    person_pinCyril D'ARROS, INSERM, UMR 1229, Regenerative Medicine and Skeleton, ONIRIS, Université de Nantes, Nantes, France ; Biomatlante - Advanced Medical Solutions Group Plc, Vigneux-de-Bretagne, France
    P8 - Biomaterial imaging - Insitu Liquid Cell Electron Microscopy of acid etching of toothpaste treated dentine and enamel Biomaterial imagingRichard LANGFORD, Univeristy of Cambridge
    Christabel FOWLER, GlaxoSmithKline Consumer Healthcare

    topicE-03 Biomaterial imaging
    person_pinRichard LANGFORD, Univeristy of Cambridge
    P9 - Biomaterial imaging - Tailored Synthesis and Biotin-functionalization of Dual-colored Silica Nanosystems for Biomedical Approaches.Biomaterial imagingMaria Antonieta RAMIREZ MORALES, HiQnano s.r.l. / Universitâ del Salento
    Elisa DI LUCA, Nanotechnology Institute, CNR-NANOTEC
    Giuseppe MELE, Department of Engineering of Innovation, University of Salento
    Pier Paolo POMPA, Nanobiointeractions & Nanodiagnostics, Istituto Italiano di Tecnologia (IIT)
    Maria Ada MALVINDI, HiQnano s.r.l.

    topicE-03 Biomaterial imaging
    person_pinMaria Antonieta RAMIREZ MORALES, HiQnano s.r.l. / Universitâ del Salento
    P1 - Cell & tissue material interactions - A protein-based multiplex assay to screen osteogenic properties of calcium phosphate biomaterials with inorganic additivesCell & tissue material interactionsMaria EISCHEN-LOGES, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, Netherlands
    Zeinab TAHMASEBI BIRGANI, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht university
    Yousra ALAOUI SELSOULI, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht university
    Martijn VAN GRIENSVEN, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht university
    Vanessa LAPOINTE, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht university
    Pamela HABIBOVIC, Maastricht university

    topicF-02 Cell & tissue material interactions
    person_pinMaria EISCHEN-LOGES, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, Netherlands
    P3 - Cell & tissue material interactions - Does the Composition of Bioceramics for Bone Regeneration Impact Osteocyte Response?Cell & tissue material interactionsMathilde PALMIER, Université de Bordeaux, Inserm
    Hélène DOAT, Université de Bordeaux, Inserm
    Mathilde FÉNELON, Université de Bordeaux, Inserm
    Marlène MAÎTRE, Université de Bordeaux, Inserm
    Thierry LESTE-LASSERRE, Université de Bordeaux, Inserm
    Claudine BOIZIAU, Université de Bordeaux, Inserm
    Delphine MAUREL, Université de Bordeaux, Inserm

    topicF-02 Cell & tissue material interactions
    person_pinMathilde PALMIER, Université de Bordeaux, Inserm
    P4 - Cell & tissue material interactions - Granular PEG hydrogels mediate osteoporotic MSC clustering via N-cadherin influencing the pro-resorptive bias of their secretory profileCell & tissue material interactionsVarsha RAO, Department of Chemical and Biological Engineering, University of Colorado, Boulder, BioFrontiers Institute, University of Colorado, Boulder
    Marissa WECHSLER, Department of Biomedical Engineering and Chemical Engineering, University of Texas, San Antonio
    Emily CRAVENS, Department of Biomedical Engineering, University of Massachusetts, Amherst
    Samantha WOJDA, Department of Biomedical Engineering, University of Massachusetts, Amherst
    Alexander CALDWELL, Department of Chemical and Biological Engineering, University of Colorado, Boulder, BioFrontiers Institute, University of Colorado, Boulder
    Bruce KIRKPARTRICK, Department of Chemical and Biological Engineering, University of Colorado, Boulder, BioFrontiers Institute, University of Colorado, Boulder, Medical Scientist Training Program, University of Colorado Anschutz Medical Campus, Aurora
    Seth DONAHUE, Department of Biomedical Engineering, University of Massachusetts, Amherst
    Kristi ANSETH, Department of Chemical and Biological Engineering, University of Colorado, Boulder, BioFrontiers Institute, University of Colorado, Boulder

    topicF-02 Cell & tissue material interactions
    person_pinVarsha RAO, Department of Chemical and Biological Engineering, University of Colorado, Boulder, BioFrontiers Institute, University of Colorado, Boulder
    P5 - Cell & tissue material interactions - Actomyosin cortex dynamics in the wound healing of cardiac fibroblastsCell & tissue material interactionsAina GALLEMI PEREZ, Max Planck Institute for Dynamics and Self-Organisation

    topicF-02 Cell & tissue material interactions
    person_pinAina GALLEMI PEREZ, Max Planck Institute for Dynamics and Self-Organisation
    P6 - Cell & tissue material interactions - Proteomic response of J774A.1 macrophages to biomedical Grade CoCr: Effect of wearCell & tissue material interactionsLuna SÁNCHEZ-LÓPEZ, National Center for Metallurgical Research (CENIM) from Spanish National Research Council (CSIC)
    Noelia ROPERO DE TORRES, Center for Biological Research-Margarita Salas (CIB-MS) from Spanish National Research Council (CSIC)
    Belén CHICO, National Center for Metallurgical Research (CENIM) from Spanish National Research Council (CSIC)
    Vivian DE LOS RÍOS BENÍTEZ, Center for Biological Research-Margarita Salas (CIB-MS) from Spanish National Research Council (CSIC)
    Maria Lorenza ESCUDERO, National Center for Metallurgical Research (CENIM) from Spanish National Research Council (CSIC)
    Maria Cristina GARCÍA-ALONSO, National Center for Metallurgical Research (CENIM) from Spanish National Research Council (CSIC)
    Rosa Maria LOZANO, Center for Biological Research-Margarita Salas (CIB-MS) from Spanish National Research Council (CSIC)

    topicF-02 Cell & tissue material interactions
    person_pinLuna SÁNCHEZ-LÓPEZ, National Center for Metallurgical Research (CENIM) from Spanish National Research Council (CSIC)
    P7 - Cell & tissue material interactions - Enhanced Neurite Growth of Human Neuroblastoma Cell Line SH-SY5Y on Nanogrooves in Polystyrene and PolydimethylsiloxaneCell & tissue material interactionsLukas MATTER, Department of Microsystems Engineering (IMTEK) - Bioelectronic Microtechnology Group, University of Freiburg, 79110 Freiburg, Germany
    Claas MÜLLER, Cluster of Excellence livMatS @ FIT – Freiburg Center for Interactive Materials and Bioinspired Technologies, University of Freiburg, 79110 Freiburg, Germany
    Maria ASPLUND, Department of Microsystems Engineering (IMTEK) - Bioelectronic Microtechnology Group, University of Freiburg, 79110 Freiburg, Germany; Center BrainLinks-BrainTools, University of Freiburg, Freiburg, Germany; Division of Nursing and Medical Technology, Luleå University of Technology, Luleå, Sweden; Freiburg Institute for Advanced Studies (FRIAS), University of Freiburg, Freiburg, Germany

    topicF-02 Cell & tissue material interactions
    person_pinLukas MATTER, Department of Microsystems Engineering (IMTEK) - Bioelectronic Microtechnology Group, University of Freiburg, 79110 Freiburg, Germany
    P8 - Cell & tissue material interactions - Determination of Mammalian Cell- Surface Interactions by Quartz Crystal MicrobalanceCell & tissue material interactionsAyse Buse ÖZDABAK SERT, Molecular Biology and Genetics Department, Istanbul Technical University
    Eva BITTRICH, Leibniz-Institut für Polymerforschung Dresden e.V.
    Fatma Nese KÖK, Molecular Biology and Genetics Department, Istanbul Technical University
    Petra UHLMANN, Leibniz-Institut für Polymerforschung Dresden e.V.

    topicF-02 Cell & tissue material interactions
    person_pinAyse Buse ÖZDABAK SERT, Molecular Biology and Genetics Department, Istanbul Technical University
    P9 - Cell & tissue material interactions - Contact guidance of vascular endothelial cells on microgrooved substrates: influence of groove dimensions and cell densityCell & tissue material interactionsClaire LECLECH, LadHyX, CNRS, Ecole Polytechnique, Institut Polytechnique de Paris, Palaiseau, France
    Apoorvaa KRISHNAMURTHY, LadHyX, CNRS, Ecole Polytechnique, Institut Polytechnique de Paris, Palaiseau, France
    Abdul BARAKAT, LadHyX, CNRS, Ecole Polytechnique, Institut Polytechnique de Paris, Palaiseau, France

    topicF-02 Cell & tissue material interactions
    person_pinClaire LECLECH, LadHyX, CNRS, Ecole Polytechnique, Institut Polytechnique de Paris, Palaiseau, France
    P10 - Cell & tissue material interactions - Studying The Role Of Hydroxypatite In The Osteomimicry Process In Bony Secondaries Using A Biocomposite From Aquaculture WasteCell & tissue material interactionsNatalia MUNOZ CASTRO, QMUL

    topicF-02 Cell & tissue material interactions
    person_pinNatalia MUNOZ CASTRO, QMUL
    P11 - Cell & tissue material interactions - Stimulating Innervation on Hyaluronan-Based Matrix with chemically modified RNAs for Bone Regenerative PurposeCell & tissue material interactionsCamille BLANCHARD, Univ. Bordeaux, INSERM, BIOTIS, U1026, Bordeaux, France
    Quentin MULLER, Univ. Bordeaux, INSERM, BIOTIS, U1026, Bordeaux, France
    Bruno PAIVA, Univ. Bordeaux, INSERM, BIOTIS, U1026, Bordeaux, France
    Andrea BANFI, Univ. Basel, Department of Biomedicine, Basel, Switzerland
    Nunzia DI MAGGIO, Univ. Basel, Department of Biomedicine, Basel, Switzerland
    Martijn VAN GRIENSVEN, Univ. Maastricht, MERLN Institute, Maastricht, The Netherlands
    Elizabeth ROSADO BALMAYOR, Univ. Maastricht, MERLN Institute, Maastricht, The Netherlands
    Christian PLANK, Ethris GmbH, Germany
    Olga MYKHAILYK, Ethris GmbH, Germany
    Elise BONVIN, OzBiosciences, France
    Olivier ZELPHATI, OzBiosciences, France
    Hugo OLIVEIRA, Univ. Bordeaux, INSERM, BIOTIS, U1026, Bordeaux, France
    Joëlle AMÉDÉE, Univ. Bordeaux, INSERM, BIOTIS, U1026, Bordeaux, France

    topicF-02 Cell & tissue material interactions
    person_pinCamille BLANCHARD, Univ. Bordeaux, INSERM, BIOTIS, U1026, Bordeaux, France
    P12 - Cell & tissue material interactions - Ultrastructure of Mineral Tissue at the Early Stage of a Healing Process in the Presence of a Biodegradable Hydroxyapatite Bone GraftCell & tissue material interactionsCamila WENDT, Centro Brasileiro de Pesquisas Físicas
    Victor ZELAYA, Brazilian Synchrotron Light Laboratory
    André LINHARES, Centro Brasileiro de Pesquisas Físicas
    Caio SANTOS, Universidade Federal do Rio de Janeiro
    Ricardo LOPES, Universidade Federal do Rio de Janeiro
    Marcos FARINA, Universidade Federal do Rio de Janeiro
    Alexandre ROSSI, Centro Brasileiro de Pesquisas Físicas

    topicF-02 Cell & tissue material interactions
    person_pinCamila WENDT, Centro Brasileiro de Pesquisas Físicas
    P13 - Cell & tissue material interactions - Human Corneal Keratocytes Display Enhanced Viability and Infiltration Capacity when Grown on Collagen Type-I-modified PHEMA HydrogelsCell & tissue material interactionsElizabeth MOLONEY, REMEDI, National University of Ireland, Galway, Ireland; College of Science and Engineering, National University of Ireland, Galway, Ireland.
    Laura SÁNCHEZ-ABELLA, CIDETEC, Basque Research and Technology Alliance, Donostia-San Sebastián, Spain
    Beatriz PALLA RUBIO, CIDETEC, Basque Research and Technology Alliance, Donostia-San Sebastián, Spain
    Maria GONZÁLEZ, AJL Ophthalmic, Alava, Spain
    Damien DUPIN, CIDETEC, Basque Research and Technology Alliance, Donostia-San Sebastián, Spain
    Eva LARRA, AJL Ophthalmic, Alava, Spain
    Iraida LOINAZ, CIDETEC, Basque Research and Technology Alliance, Donostia-San Sebastián, Spain
    Abhay PANDIT, CURAM, National University of Ireland, Galway, Ireland; College of Science and Engineering, National University of Ireland, Galway, Ireland.
    Thomas RITTER, REMEDI, National University of Ireland, Galway, Ireland; College of Medicine Nursing and Health Science, National University of Ireland, Galway, Ireland

    topicF-02 Cell & tissue material interactions
    person_pinThomas RITTER, REMEDI, National University of Ireland, Galway, Ireland; College of Medicine Nursing and Health Science, National University of Ireland, Galway, Ireland
    P14 - Cell & tissue material interactions - Determining The Biological Response To Metallic 3D Prints Through Plasma Surface Treatment Postprocessing Method.Cell & tissue material interactionsDorota BOCIAGA, Lodz University of Technology
    Jacek GRABARCZYK, Lodz University of Technology
    Adrianna WIERZBICKA, Lodz University of Technology
    Marcin SKRODZKI, Medgal Ltd.

    topicF-02 Cell & tissue material interactions
    person_pinDorota BOCIAGA, Lodz University of Technology
    P16 - Cell & tissue material interactions - Fibronectin-Biofunctionalization of chitosan hydrogelsCell & tissue material interactionsCarla PALOMINO-DURAND, Equipe de Recherche sur les Relations Matrice Extracellulaire Cellules, ERRMECe, CY Cergy-Paris Université, Cergy-Pontoise, France
    Pierre MARQUAILLE, Equipe de Recherche sur les Relations Matrice Extracellulaire Cellules, ERRMECe, CY Cergy-Paris Université, Cergy-Pontoise, France / Molecular, Macromolecular Chemistry and Materials, C3M, ESPCI Paris, CNRS, PSL University, Paris, France
    Phuong Anh DANG, Equipe de Recherche sur les Relations Matrice Extracellulaire Cellules, ERRMECe, CY Cergy-Paris Université, Cergy-Pontoise, France / Molecular, Macromolecular Chemistry and Materials, C3M, ESPCI Paris, CNRS, PSL University, Paris, France
    Maxence GALL, Equipe de Recherche sur les Relations Matrice Extracellulaire Cellules, ERRMECe, CY Cergy-Paris Université, Cergy-Pontoise, France
    Sophie NORVEZ, Molecular, Macromolecular Chemistry and Materials, C3M, ESPCI Paris, CNRS, PSL University, Paris, France
    Laurent CORTE, Molecular, Macromolecular Chemistry and Materials, C3M, ESPCI Paris, CNRS, PSL University, Paris, France / Centre des Matériaux, MINES ParisTech, CNRS, PSL University, Evry, France
    Adeline GAND, Equipe de Recherche sur les Relations Matrice Extracellulaire Cellules, ERRMECe, CY Cergy-Paris Université, Cergy-Pontoise, France
    Emmanuel PAUTHE, Equipe de Recherche sur les Relations Matrice Extracellulaire Cellules, ERRMECe, CY Cergy-Paris Université, Cergy-Pontoise, France

    topicF-02 Cell & tissue material interactions
    person_pinCarla PALOMINO-DURAND, Equipe de Recherche sur les Relations Matrice Extracellulaire Cellules, ERRMECe, CY Cergy-Paris Université, Cergy-Pontoise, France
    P17 - Cell & tissue material interactions - Surface Electric Fields Increase Osteoclast Resorption on Carbonate–Incorporated ApatiteCell & tissue material interactionsLeire BERGARA-MUGURUZA, University of Turku
    Keijo MÄKELÄ, University of Turku
    Tommi YRJÄLÄ , University of Turku
    Jukka SALONEN, University of Turku
    Kimihiro YAMASHITA, Tokyo Medical and Dental University
    Miho NAKAMURA, University of Turku/Tokyo Medical and Dental University

    topicF-02 Cell & tissue material interactions
    person_pinMiho NAKAMURA, University of Turku/Tokyo Medical and Dental University
    P18 - Cell & tissue material interactions - Comparison of cellular effects of HEMA and TEGDMACell & tissue material interactionsBergitte Pearl OLDERBØ, NIOM - Nordic Institute of Dental Materials
    Remy B PETERMANN, NIOM - Nordic Institute of Dental Materials
    Jan Tore SAMUELSEN, NIOM - Nordic Institute of Dental Materials

    topicF-02 Cell & tissue material interactions
    person_pinBergitte Pearl OLDERBØ, NIOM - Nordic Institute of Dental Materials
    P19 - Cell & tissue material interactions - Toward an evolution of the strain-based peri-implant bone remodelingCell & tissue material interactionsRémy GAUTHIER, Univ Lyon, CNRS, INSA Lyon, UCBL, MatéIS, France
    Hélène FOLLET, Univ Lyon, INSERM UMR 1033, UCBL, LYOS, France
    Ana-Maria TRUNFIO-SFARGHIU, Univ Lyon, CNRS, INSA Lyon, LaMCoS, France
    Delphine FARLAY, Univ Lyon, INSERM UMR 1033, UCBL, LYOS, France
    Nina ATTIK, Univ Lyon, CNRS, UCBL, LMI, France
    Sylvain MEILLE, Univ Lyon, CNRS, INSA Lyon, UCBL, MatéIS, France
    Jérôme CHEVALIER, Univ Lyon, CNRS, INSA Lyon, UCBL, MatéIS, France
    David MITTON, Univ Lyon, Univ Gustave Eiffel, UCBL, LBMC, France

    topicF-02 Cell & tissue material interactions
    person_pinRémy GAUTHIER, Univ Lyon, CNRS, INSA Lyon, UCBL, MatéIS, France
    P21 - Cell & tissue material interactions - Incorporation of metallic nanoparticles in silicone breast implants for reduction of capsular contractureCell & tissue material interactionsEugénie GUIMIER , Queen's University Belfast
    James QUINN, Queen's University Belfast
    Xin SHEN, Queen's University Belfast
    Louise CARSON, Queen's University Belfast
    Benny DAVID, NuSil Avantor
    James LAMBERT, NuSil Avantor
    John ZUPANSIC, NuSil Avantor
    Enda HEERY, NuSil Avantor
    Karl MALCOLM, Queen's University Belfast

    topicF-02 Cell & tissue material interactions
    person_pinEugénie GUIMIER , Queen's University Belfast
    P23 - Cell & tissue material interactions - Curvature as a guiding cue for single and collective cell migrationCell & tissue material interactionsLaurent PIEUCHOT, Université de Haute-Alsace, CNRS, IS2M, UMR 7361, Mulhouse, F-68100, France
    Karine ANSELME, Université de Haute-Alsace, CNRS, IS2M, UMR 7361, Mulhouse, F-68100, France
    Isabelle BRIGAUD, Université de Haute-Alsace, CNRS, IS2M, UMR 7361, Mulhouse, F-68100, France
    Tatiana PETITHORY, Université de Haute-Alsace, CNRS, IS2M, UMR 7361, Mulhouse, F-68100, France
    Arnaud PONCHE, Université de Haute-Alsace, CNRS, IS2M, UMR 7361, Mulhouse, F-68100, France

    topicF-02 Cell & tissue material interactions
    person_pinLaurent PIEUCHOT, Université de Haute-Alsace, CNRS, IS2M, UMR 7361, Mulhouse, F-68100, France
    P24 - Cell & tissue material interactions - Immuno-characterization of the native tissue of the apical papilla of wisdom teeth and culture optimization of their derived stem cells (SCAPs) to potentiate the grafting of cellularized biomaterialsCell & tissue material interactionsHélène BOEUF, INSERM U1026 Biotis

    topicF-02 Cell & tissue material interactions
    person_pinHélène BOEUF, INSERM U1026 Biotis
    P25 - Cell & tissue material interactions - Improved osteoblastic growth behavior on Fetuin A functionalized biodegradable nonwovensCell & tissue material interactionsJana MARKHOFF, Institute for Biomedical Engineering, Rostock University Medical Center, Rostock, Germany
    Stefan OSCHATZ, Institute for Biomedical Engineering, Rostock University Medical Center, Rostock, Germany
    Michael TESKE, Institute for Biomedical Engineering, Rostock University Medical Center, Rostock, Germany
    Ulrike BURMEISTER, Department of Operative Dentistry and Periodontology, Rostock University Medical Center, Rostock, Germany
    Sabine ILLNER, Institute for Biomedical Engineering, Rostock University Medical Center, Rostock, Germany
    Hermann LANG, Department of Operative Dentistry and Periodontology, Rostock University Medical Center, Rostock, Germany
    Niels GRABOW, Institute for Biomedical Engineering, Rostock University Medical Center, Rostock, Germany

    topicF-02 Cell & tissue material interactions
    person_pinJana MARKHOFF, Institute for Biomedical Engineering, Rostock University Medical Center, Rostock, Germany
    P26 - Cell & tissue material interactions - Screening for osteogenic differentiation stimulating surface characteristics on Poly lactic acid using Double Orthogonal Gradients Cell & tissue material interactionsRoderick DE HILSTER, W.J. Kolff Institute for Biomedical Engineering and Materials Science, University of Groningen/ University Medical Center Groningen (UMCG), Ant. Deusinglaan 1, Groningen, The Netherlands
    Torben VAN DER BOON, W.J. Kolff Institute for Biomedical Engineering and Materials Science, University of Groningen/ University Medical Center Groningen (UMCG), Ant. Deusinglaan 1, Groningen, The Netherlands
    Patrick VAN RIJN, W.J. Kolff Institute for Biomedical Engineering and Materials Science, University of Groningen/ University Medical Center Groningen (UMCG), Ant. Deusinglaan 1, Groningen, The Netherlands

    topicF-02 Cell & tissue material interactions
    person_pinRoderick DE HILSTER, W.J. Kolff Institute for Biomedical Engineering and Materials Science, University of Groningen/ University Medical Center Groningen (UMCG), Ant. Deusinglaan 1, Groningen, The Netherlands
    P27 - Cell & tissue material interactions - Characterization of alginate and oxidized alginates: definition of new bioinks for 3D printing of breast cancer modelsCell & tissue material interactionsChen ZHAO, University of Manchester
    Lekha SHAH, University of Manchester
    Ayse LATIF, University of Manchester
    Kaye J WILLIAMS, University of Manchester
    Annalisa TIRELLA, University of Trento

    topicF-02 Cell & tissue material interactions
    person_pinAnnalisa TIRELLA, University of Trento
    P29 - Cell & tissue material interactions - Foreign body reaction: cartography of macrophage activation in a model of material implantation in rat subcutaneous tissueCell & tissue material interactionsArvind RATHORE, Inserm, Univ. Bordeaux, BioTis Lab
    Simon HEMOUR, ISM, Univ. Bordeaux
    Vincent RAIMBAULT, LAAS, CNRS
    Helene BOEUF, Inserm, Univ. Bordeaux, BioTis Lab
    Claudine BOIZIAU, Inserm, Univ. Bordeaux, BioTis Lab

    topicF-02 Cell & tissue material interactions
    person_pinClaudine BOIZIAU, Inserm, Univ. Bordeaux, BioTis Lab
    P30 - Cell & tissue material interactions - Study of the Cu2+ Doping Effect on the Acute Inflammation Response to Biphasic Calcium Phosphate Materials for Bone Defects RegenerationCell & tissue material interactionsLéa THORAVAL, EA4691 BIOS, University of Reims Champagne-Ardenne, Reims, France
    Émilie THIÉBAULT, EA4691 BIOS, University of Reims Champagne-Ardenne, Reims, France
    Renaud SIBONI, EA4691 BIOS, University of Reims Champagne-Ardenne, Reims, France
    Aurélie MONIOT, EA4691 BIOS, University of Reims Champagne-Ardenne, Reims, France
    Christine GUILLAUME, EA4691 BIOS, University of Reims Champagne-Ardenne, Reims, France
    Aurélie JACOBS, University Clermont Auvergne, Clermont Auvergne INP, CNRS, ICCF, Clermont-Ferrand, France
    Jean-Marie NEDELEC, University Clermont Auvergne, Clermont Auvergne INP, CNRS, ICCF, Clermont-Ferrand, France
    Guillaume RENAUDIN, University Clermont Auvergne, Clermont Auvergne INP, CNRS, ICCF, Clermont-Ferrand, France
    Stéphane DESCAMPS, University Clermont Auvergne, Clermont Auvergne INP, CNRS, ICCF, Clermont-Ferrand, France
    David MARCHAT, Mines Saint-Etienne, INSERM U1059 SAINBIOSE, University of Lyon, University Jean Monnet, Saint-Etienne, France
    Sophie C. GANGLOFF, EA4691 BIOS, University of Reims Champagne-Ardenne, Reims, France
    Julien BRAUX, EA4691 BIOS, University of Reims Champagne-Ardenne, Reims, France
    Frédéric VELARD, EA4691 BIOS, University of Reims Champagne-Ardenne, Reims, France

    topicF-02 Cell & tissue material interactions
    person_pinLéa THORAVAL, EA4691 BIOS, University of Reims Champagne-Ardenne, Reims, France
    P31 - Cell & tissue material interactions - Sulfated Micro-Islands in Granular Hydrogels Promote Endogenous Cell Homing into Cartilage DefectsCell & tissue material interactionsAnna PUIGGALI, Department of Health Sciences and Technology, ETH Zurich, Zurich, Switzerland
    Maryam ASADIKORAYEM, Department of Health Sciences and Technology, ETH Zurich, Zurich, Switzerland
    Katharina MANIURA, Laboratory for Biointerfaces, Empa, Sant Gallen, Switzerland
    Marcy ZENOBI-WONG, Department of Health Sciences and Technology, ETH Zurich, Zurich, Switzerland

    topicF-02 Cell & tissue material interactions
    person_pinAnna PUIGGALI, Department of Health Sciences and Technology, ETH Zurich, Zurich, Switzerland
    P32 - Cell & tissue material interactions - Synergistic effect of isotropic and anisotropic surface features on osteogenic differentiationCell & tissue material interactionsTorben BOON, VAN DER, University Medical Center Groningen (UMCG)
    Roderick HILSTER, DE, University Medical Center Groningen (UMCG)

    topicF-02 Cell & tissue material interactions
    person_pinTorben BOON, VAN DER, University Medical Center Groningen (UMCG)
    P33 - Cell & tissue material interactions - High-throughput Screening to Elucidate Biomaterial-induced FibrosisCell & tissue material interactionsTorben BOON, VAN DER, University Medical Center Groningen (UMCG)
    Lisa TROMP, University Medical Center Groningen (UMCG)

    topicF-02 Cell & tissue material interactions
    person_pinTorben BOON, VAN DER, University Medical Center Groningen (UMCG)
    P35 - Cell & tissue material interactions - Interactive hemocompatible coatings that modulate hemostasis at the surface of blood contacting medical devicesCell & tissue material interactionsLena WITZDAM, DWI Leibniz Institute for Interactive Materials, Aachen, Germany
    Fabian OBSTALS, DWI Leibniz Institute for Interactive Materials, Aachen, Germany
    Manuela GARAY SARMIENTO, DWI Leibniz Institute for Interactive Materials, Aachen, Germany
    Jonas QUANDT, DWI Leibniz Institute for Interactive Materials, Aachen, Germany
    Nina KOSTINA, DWI Leibniz Institute for Interactive Materials, Aachen, Germany
    Oliver GROTTKE, Department of Anesthesiology, University Hospital of the RWTH Aachen University, Aach
    Cesar RODRIGUEZ-EMMENEGGER, 1DWI Leibniz Institute for Interactive Materials, Aachen, Germany, 2Institute for Bioengineering of Catalonia (IBEC), Barcelona, Spain and 3Institució Catalana de Reserca I Estudis Avançats (ICREA), Spain,

    topicF-02 Cell & tissue material interactions
    person_pinCesar RODRIGUEZ-EMMENEGGER, 1DWI Leibniz Institute for Interactive Materials, Aachen, Germany, 2Institute for Bioengineering of Catalonia (IBEC), Barcelona, Spain and 3Institució Catalana de Reserca I Estudis Avançats (ICREA), Spain,
    P1 - Protein-surface interactions - Quantitative analysis of distribution paxillin and vinculin in osteoblasts and fibroblasts binding to electrospun PMMA fibers based on super-resolution fluorescent images. Protein-surface interactionsKrzysztof BERNIAK, Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Cracow, Poland
    Daniel URA, Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Cracow, Poland
    Urszula STACHEWICZ, Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Cracow, Poland

    topicF-04 Protein-surface interactions
    person_pinKrzysztof BERNIAK, Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Cracow, Poland
    P2 - Protein-surface interactions - Effect of blood genetic mutations to the hemolytic behavior of cerium oxide nanoparticlesProtein-surface interactionsIoannis TSAMESIDIS, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Georgia K. POUROUTZIDOU, 1School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece 2School of Physics, Faculty of Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Maria-Eleni IOANNOU , School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Mirto KARKAVITSA, Department of Biomedical Sciences, Faculty of Health Sciences, International Hellenic University, 570 01
    Aggeliki PAGKARLIOTA, Ippokratio University Hospital, Thessaloniki, Greece
    Iason CHATZIMENTOR, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    Efthymia VLACHAKI , Ippokratio University Hospital, Thessaloniki, Greece
    Eleana KONTONASAKI, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece

    topicF-04 Protein-surface interactions
    person_pinIoannis TSAMESIDIS, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
    P3 - Protein-surface interactions - The influence of surface topography parameters on the susceptibility to albumin adsorption for clinical application in VAD devicesProtein-surface interactionsPrzemyslaw KURTYKA, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland/Institute of Heart Prosthesis, Foundation Of Cardiac Surgery Development, Zabrze, Poland/Institute Of Metallurgy And Materials Science, Polish Academy Of Sciences, Krakow, Poland.
    Roman MAJOR, Institute Of Metallurgy And Materials Science, Polish Academy Of Sciences, Krakow, Poland
    Marcin KACZMAREK, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    Wojciech KAJZER, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    Zbigniew PASZENDA, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    Roman KUSTOSZ, Institute of Heart Prosthesis, Foundation Of Cardiac Surgery Development, Zabrze, Poland

    topicF-04 Protein-surface interactions
    person_pinWojciech KAJZER, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    P1 - Tissue models, lab-on-chip, organ-on-chip - Organ-on-a-chip to evaluate biomaterialsTissue models, lab-on-chip, organ-on-chipOscar CASTANO LINARES, University of Barcelona (UB), Barcelona, Spain; Institute for Bioengineering of Catalonia (IBEC), Barcelona, Spain; CIBER en Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, Madrid, Spain
    Adrian LOPEZ CANOSA, Institute for Bioengineering of Catalonia (UB)
    Ines SOUSA PEREIRA, Institute for Bioengineering of Catalonia (UB)
    Anna VILCHE MARISCAL, University of Barcelona (UB)
    Ana PASCUAL SEGURA, University of Barcelona (UB)
    Josep FERRE TORRES, University of Barcelona (UB)
    Adrià NOGUERA MONTEAGUDO, University of Barcelona (UB)
    Eduardo YANAC HUERTAS, University of Barcelona (UB)
    Soledad PEREZ-AMODIO, Institute for Bioengineering of Catalonia (UB)
    Romen RODRIGUEZ TRUJILLO, University of Barcelona (UB)
    Aurora HERNANDEZ MACHADO, University of Barcelona (UB)
    Josep SAMITIER, Institute for Bioengineering of Catalonia (UB)
    Elisabeth ENGEL LOPEZ, Polytechnical University of Catalonia (UPC)

    topicG-01 Tissue models, lab-on-chip, organ-on-chip
    person_pinOscar CASTANO LINARES, University of Barcelona (UB), Barcelona, Spain; Institute for Bioengineering of Catalonia (IBEC), Barcelona, Spain; CIBER en Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, Madrid, Spain
    P2 - Tissue models, lab-on-chip, organ-on-chip - Microphysiological systems for the study of neurodegenerative diseases in vitroTissue models, lab-on-chip, organ-on-chipEleonora DE VITIS, CNR NANOTEC – Institute of Nanotechnology, Lecce, Italy; Università Del Salento, Dipartimento di Matematica e Fisica E. de Giorgi, Lecce, Italy
    Velia LA PESA, IRCCS San Raffaele Scientific Institute
    Francesca GERVASO, CNR-Nanotec, Istituto di Nanotecnologia
    Alessandro ROMANO, IRCCS San Raffaele Scientific Institute
    Angelo QUATTRINI, IRCCS San Raffaele Scientific Institute
    Giuseppe GIGLI, CNR-Nanotec, Istituto di Nanotecnologia e Università del Salento
    Lorenzo MORONI, Maastricht University, Complex Tissue Regeneration
    Alessandro POLINI, CNR-Nanotec, Istituto di Nanotecnologia

    topicG-01 Tissue models, lab-on-chip, organ-on-chip
    person_pinEleonora DE VITIS, CNR NANOTEC – Institute of Nanotechnology, Lecce, Italy; Università Del Salento, Dipartimento di Matematica e Fisica E. de Giorgi, Lecce, Italy
    P4 - Tissue models, lab-on-chip, organ-on-chip - Emulating the basement membrane in in vitro models of the human intestinal epitheliumTissue models, lab-on-chip, organ-on-chipNathalie JUNG, Institute of Pharmaceutical Technology and Buchmann Institute for Molecular Life Sciences, Goethe-University Frankfurt, Frankfurt am Main, Germany
    Felix ROHDE, Institute of Pharmaceutical Technology and Buchmann Institute for Molecular Life Sciences, Goethe-University Frankfurt, Frankfurt am Main, Germany
    Maike WINDBERGS, Institute of Pharmaceutical Technology and Buchmann Institute for Molecular Life Sciences, Goethe-University Frankfurt, Frankfurt am Main, Germany

    topicG-01 Tissue models, lab-on-chip, organ-on-chip
    person_pinNathalie JUNG, Institute of Pharmaceutical Technology and Buchmann Institute for Molecular Life Sciences, Goethe-University Frankfurt, Frankfurt am Main, Germany
    P5 - Tissue models, lab-on-chip, organ-on-chip - Adipose-derived stem cell spheroids on chip: A system to study altered secretion in diabetic foot ulcerTissue models, lab-on-chip, organ-on-chipIris LEMEUNIER, Univ. Grenoble Alpes, CEA, INSERM, IRIG, BIOMICS, Grenoble, France
    Stéphanie PORTE, Univ. Grenoble Alpes, CEA, INSERM, IRIG, BIOMICS, Grenoble, France
    Clément QUINTARD, Univ. Grenoble Alpes, CEA, INSERM, IRIG, BIOMICS, Grenoble, France; Univ. Grenoble Alpes, CEA, LETI, DTBS, Grenoble, France
    Delphine FREIDA, Univ. Grenoble Alpes, CEA, INSERM, IRIG, BIOMICS, Grenoble, France
    Frédérique KERMARREC, Univ. Grenoble Alpes, CEA, INSERM, IRIG, BIOMICS, Grenoble, France
    Victoria PAKULSKA, Laboratoire EDyP, University of Grenoble Alpes, CEA, INSERM, IRIG, BGE, Grenoble, France
    Yohann COUTÉ, Laboratoire EDyP, University of Grenoble Alpes, CEA, INSERM, IRIG, BGE, Grenoble, France
    Stéphanie COMBE, Univ. Grenoble Alpes, CEA, INSERM, IRIG, BIOMICS, Grenoble, France
    Vincent HAGUET, Univ. Grenoble Alpes, CEA, INSERM, IRIG, BIOMICS, Grenoble, France
    Remigijus VASILIAUSKAS, Univ. Grenoble Alpes, CEA, INSERM, IRIG, BIOMICS, Grenoble, France
    Sander BOTTER, Swiss Center for Musculoskeletal Biobanking (SCMB), Balgrist Campus AG
    Felix WAIBEL, Swiss Center for Musculoskeletal Biobanking (SCMB), Balgrist Campus AG
    Ilker UCKAY, Swiss Center for Musculoskeletal Biobanking (SCMB), Balgrist Campus AG
    Olivier PREYNAT-SEAUVE, Laboratory of therapy and stem cells, Department of diagnostics, Geneva University Hospital, Geneva, Switzerland; Faculty of medicine University of Geneva, Geneva, Switzerland
    Fabrice NAVARRO, Univ. Grenoble Alpes, CEA, LETI, DTBS, Grenoble, France
    Nathalie PICOLLET-D'HAHAN, Univ. Grenoble Alpes, CEA, INSERM, IRIG, BIOMICS, Grenoble, France
    Yves FOUILLET, Univ. Grenoble Alpes, CEA, LETI, DTBS, Grenoble, France
    Xavier GIDROL, Univ. Grenoble Alpes, CEA, INSERM, IRIG, BIOMICS, Grenoble, France

    topicG-01 Tissue models, lab-on-chip, organ-on-chip
    person_pinIris LEMEUNIER, Univ. Grenoble Alpes, CEA, INSERM, IRIG, BIOMICS, Grenoble, France
    P10 - Tissue models, lab-on-chip, organ-on-chip - A 3D Bioprinted Model of the Glioblastoma Microenvironment Designed to Assess the Impact of Radiotherapy on Vascular and Tumor Cell InteractionsTissue models, lab-on-chip, organ-on-chipNathalie DUSSERRE, BioTis, ART BioPrint, UMR Inserm 1026, Université de Bordeaux, 146 rue Léo Saignat, 33076 Bordeaux, France
    Marie-Laure STACHOWICZ, BioTis, ART BioPrint, UMR Inserm 1026, Université de Bordeaux, 146 rue Léo Saignat, 33076 Bordeaux, France
    Astrid DENDONCKER, BioTis, ART BioPrint, UMR Inserm 1026, Université de Bordeaux, 146 rue Léo Saignat, 33076 Bordeaux, France
    Clémentine BENEDETTI, BioTis, ART BioPrint, UMR Inserm 1026, Université de Bordeaux, 146 rue Léo Saignat, 33076 Bordeaux, France
    Chantal MEDINA, BioTis, ART BioPrint, UMR Inserm 1026, Université de Bordeaux, 146 rue Léo Saignat, 33076 Bordeaux, France
    Léo COMPERAT, BioTis, ART BioPrint, UMR Inserm 1026, Université de Bordeaux, 146 rue Léo Saignat, 33076 Bordeaux, France
    Jean-Christophe FRICAIN, BioTis, ART BioPrint, UMR Inserm 1026, Université de Bordeaux, 146 rue Léo Saignat, 33076 Bordeaux, France AND CHU Bordeaux, Services d’Odontologie et de Santé Buccale, F-33076 Bordeaux, France
    Hugo OLIVEIRA, BioTis, ART BioPrint, UMR Inserm 1026, Université de Bordeaux, 146 rue Léo Saignat, 33076 Bordeaux, France
    François PARIS, CRCI²NA, UMR Inserm 1307, Université de Nantes, Nantes, France

    topicG-01 Tissue models, lab-on-chip, organ-on-chip
    person_pinNathalie DUSSERRE, BioTis, ART BioPrint, UMR Inserm 1026, Université de Bordeaux, 146 rue Léo Saignat, 33076 Bordeaux, France
    P11 - Tissue models, lab-on-chip, organ-on-chip - Digital Light Processing 3D printing optimization of high aspect ratio structures for rapid prototyping of chips towards biomedical applicationsTissue models, lab-on-chip, organ-on-chipAlessio BUCCIARELLI, CNR-Nanotec
    Xenia PAOLELLI , University of Salento
    Eleonora DE VITIS, CNR-Nanotec
    Francesca GERVASO , CNR-Nanotec
    Giuseppe GIGLI , CNR-Nanotec
    Lorenzo MORONI, MERLN Institute for Technology-Inspired Regenerative Medicine
    Alessandro POLINI , CNR-Nanotec

    topicG-01 Tissue models, lab-on-chip, organ-on-chip
    person_pinXenia PAOLELLI , University of Salento
    P13 - Tissue models, lab-on-chip, organ-on-chip - Multidimensional Advanced Scaffold-Based Cell Culture Systems for Tumor EngineeringTissue models, lab-on-chip, organ-on-chipGiada BASSI, Institute of Science and Technology for Ceramics - National Research Council of Italy (ISTEC-CNR); 2Department of Neuroscience, Imaging and Clinical Sciences, University of Studies “G. D’Annunzio” Chieti-Pescara
    Arianna ROSSI, Institute of Science and Technology for Ceramics - National Research Council of Italy (ISTEC-CNR); Department of Chemical, Biological, Pharmaceutical and Environmental Sciences, University of Studies of Messina
    Elisabetta CAMPODINI, Institute of Science and Technology for Ceramics - National Research Council of Italy (ISTEC-CNR)
    Monica SANDRI, Institute of Science and Technology for Ceramics - National Research Council of Italy (ISTEC-CNR)
    Tampieri ANNA, Institute of Science and Technology for Ceramics - National Research Council of Italy (ISTEC-CNR)
    Silvia PANSERI, Institute of Science and Technology for Ceramics - National Research Council of Italy (ISTEC-CNR)
    Monica MONTESI, Institute of Science and Technology for Ceramics - National Research Council of Italy (ISTEC-CNR)

    topicG-01 Tissue models, lab-on-chip, organ-on-chip
    person_pinMonica MONTESI, Institute of Science and Technology for Ceramics - National Research Council of Italy (ISTEC-CNR)
    P14 - Tissue models, lab-on-chip, organ-on-chip - Animal free fibrous scaffolds for 3D multi-layered epithelial modelsTissue models, lab-on-chip, organ-on-chipTobias WEIGEL, Translational Center Regenerative Therapies (TLC-RT), Fraunhofer Institute for Silicate Research (ISC), Wuerzburg, Germany
    Bastian CHRIST, Translational Center Regenerative Therapies (TLC-RT), Fraunhofer Institute for Silicate Research (ISC), Wuerzburg, Germany
    Jan HANSMANN, Faculty of Electrical Engineering, University of Applied Sciences Würzburg-Schweinfurt, Schweinfurt, Germany
    Jörn PROBST, Translational Center Regenerative Therapies (TLC-RT), Fraunhofer Institute for Silicate Research (ISC), Wuerzburg, Germany
    Florian GROEBER-BECKER, Translational Center Regenerative Therapies (TLC-RT), Fraunhofer Institute for Silicate Research (ISC), Wuerzburg, Germany

    topicG-01 Tissue models, lab-on-chip, organ-on-chip
    person_pinTobias WEIGEL, Translational Center Regenerative Therapies (TLC-RT), Fraunhofer Institute for Silicate Research (ISC), Wuerzburg, Germany
    P15 - Tissue models, lab-on-chip, organ-on-chip - Bioprinted breast cancer model for the study of microenvironment effect on treatment responseTissue models, lab-on-chip, organ-on-chipThéo DESIGAUX, INSERM ART Bioprint, UMR1026 Biotis, Université de Bordeaux
    Léo COMPERAT, INSERM ART Bioprint, UMR1026 Biotis
    Nathalie DUSSERRE, INSERM ART Bioprint, UMR1026 Biotis
    Marie-Laure STACHOWICZ, INSERM ART Bioprint, UMR1026 Biotis
    Jean-Christophe FRICAIN, INSERM ART Bioprint, UMR1026 Biotis, Université de Bordeaux
    François PARIS, Université de Nantes, CRCINA, INSERM 892 – CNRS 6299

    topicG-01 Tissue models, lab-on-chip, organ-on-chip
    person_pinThéo DESIGAUX, INSERM ART Bioprint, UMR1026 Biotis, Université de Bordeaux
    P17 - Tissue models, lab-on-chip, organ-on-chip - 3D Printed Microfluidic Device as a Potential Tumor on a Chip Platform in Cancer Management Tissue models, lab-on-chip, organ-on-chipIonut-Cristian RADU, University Politehnica of Bucharest
    Catalin ZAHARIA, University Politehnica of Bucharest
    Madalina NECOLAU, University Politehnica of Bucharest
    Eugeniu VASILE, University Politehnica of Bucharest
    Andreea VADUREANU, University Politehnica of Bucharest

    topicG-01 Tissue models, lab-on-chip, organ-on-chip
    person_pinIonut-Cristian RADU, University Politehnica of Bucharest
    P18 - Tissue models, lab-on-chip, organ-on-chip - Nerve Tissue Model on a Micropatterned Surface: Axon Guidance and Neural RegenerationTissue models, lab-on-chip, organ-on-chipDilara Goksu TAMAY, Middle East Technical University Center of Excellence in Biomaterials and Tissue Engineering (METU BIOMATEN), Ankara, Turkey; METU Department of Biotechnology, Ankara, Turkey
    Damla ARSLANTUNALI-SAHIN, Middle East Technical University Center of Excellence in Biomaterials and Tissue Engineering (METU BIOMATEN), Ankara, Turkey; Gumushane University Department of Genetics and Bioengineering, Gumushane, Turkey
    Ali Can ATIK, Middle East Technical University (METU) Department of Electrical and Electronics Engineering, Ankara, Turkey; METU MEMS Center, Ankara, Turkey
    Seyma ISIK, Acibadem Mehmet Ali Aydinlar University (ACU) Department of Medical Biotechnology, Istanbul, Turkey; ACU Biomaterials Center, Istanbul, Turkey
    Deniz YUCEL, Acibadem Mehmet Ali Aydinlar University (ACU) Department of Histology and Embryology, Istanbul, Turkey; ACU Biomaterials Center, Istanbul, Turkey
    Haluk KULAH, Middle East Technical University (METU) Department of Electrical and Electronics Engineering, Ankara, Turkey; METU MEMS Center, Ankara, Turkey
    Nesrin HASIRCI, Middle East Technical University Center of Excellence in Biomaterials and Tissue Engineering (METU BIOMATEN), Ankara, Turkey; METU Department of Chemistry, Ankara, Turkey; Near East University Tissue Engineering and Biomaterials Research Center, Mersin 10, Turkey
    Vasif HASIRCI, Middle East Technical University Center of Excellence in Biomaterials and Tissue Engineering (METU BIOMATEN), Ankara, Turkey; Acibadem Mehmet Ali Aydinlar University (ACU) Department of Medical Engineering, Istanbul, Turkey; ACU Biomaterials Center, Istanbul, Turkey

    topicG-01 Tissue models, lab-on-chip, organ-on-chip
    person_pinDilara Goksu TAMAY, Middle East Technical University Center of Excellence in Biomaterials and Tissue Engineering (METU BIOMATEN), Ankara, Turkey; METU Department of Biotechnology, Ankara, Turkey
    P19 - Tissue models, lab-on-chip, organ-on-chip - Improvement of Epithelial and Endothelial Cell Attachment and Proliferation Rate on the Poly(caprolactone) Microfibrous MeshesTissue models, lab-on-chip, organ-on-chipNeval SEVINC OZDEMIR, Res. Asst.
    Halime KENAR, Prof. Dr.
    Vasif HASIRCI, Prof. Dr.

    topicG-01 Tissue models, lab-on-chip, organ-on-chip
    person_pinNeval SEVINC OZDEMIR, Res. Asst.
    P21 - Tissue models, lab-on-chip, organ-on-chip - Alternative methods and in vitro skin 3D tissue models: What’s new for toxicity testing in medical devices?Tissue models, lab-on-chip, organ-on-chipEdith FILAIRE, ICARE
    Rachida NACHAT-KAPPES, Innovskin
    Camille LAPORTE, CEA-LETI Univ Grenoble France
    Marie-Françoise HARMAND, ICARE
    Marina SIMON, ICARE
    Christian POINSOT, ICARE

    topicG-01 Tissue models, lab-on-chip, organ-on-chip
    person_pinEdith FILAIRE, ICARE
    P1 - Organ models, organoids and spheroids - A 3D Co-Culture Spheroid Model to Assess the Response of Bone Metastases to Anticancer DrugsOrgan models, organoids and spheroidsCeri-Anne SUURMOND, Department of Dentistry – Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, Nijmegen, The Netherlands
    Rong WANG, Department of Dentistry, Regenerative Biomaterials, Radboud Institute of Molecular Life Sciences, Radboud University Medical Center
    Jeroen VAN DEN BEUCKEN, Department of Dentistry, Regenerative Biomaterials, Radboud Institute of Molecular Life Sciences, Radboud University Medical Center
    Sander LEEUWENBURGH, Department of Dentistry, Regenerative Biomaterials, Radboud Institute of Molecular Life Sciences, Radboud University Medical Center

    topicG-02 Organ models, organoids and spheroids
    person_pinCeri-Anne SUURMOND, Department of Dentistry – Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, Nijmegen, The Netherlands
    P3 - Organ models, organoids and spheroids - Dynamic 3D Cultivation of Adipose-Derived Mesenchymal Stem Cells within Alginate Core–Shell CapsulesOrgan models, organoids and spheroidsSabrina NEBEL, Institute of Cell & Tissue Culture Technologies, Department of Biotechnology, University of Natural Resources and Life Sciences BOKU, Vienna
    Manuel LUX, Institute of Cell & Tissue Culture Technologies, Department of Biotechnology, University of Natural Resources and Life Sciences BOKU, Vienna
    Wolf DIETRICH, Department of Gynecology & Obstetrics, Karl Landsteiner University of Health Sciences, Tulln, Austria
    Dominik EGGER, Institute of Cell & Tissue Culture Technologies, Department of Biotechnology, University of Natural Resources and Life Sciences BOKU, Vienna
    Cornelia KASPER, Institute of Cell & Tissue Culture Technologies, Department of Biotechnology, University of Natural Resources and Life Sciences BOKU, Vienna

    topicG-02 Organ models, organoids and spheroids
    person_pinSabrina NEBEL, Institute of Cell & Tissue Culture Technologies, Department of Biotechnology, University of Natural Resources and Life Sciences BOKU, Vienna
    P4 - Organ models, organoids and spheroids - 3D Printed Biocompatible Molds for High Production of Homogeneous Embryoid Bodies for Specific Differentiation Organ models, organoids and spheroidsAlejandro REINA MAHECHA, University Medical Centre Groningen
    Paulien SCHAAFSMA, University Medical Centre Groningen
    Theo VAN KOOTEN, University Medical Centre Groningen
    Inge ZUHOORN, University Medical Centre Groningen
    Prashant SHARMA, University Medical Centre Groningen

    topicG-02 Organ models, organoids and spheroids
    person_pinAlejandro REINA MAHECHA, University Medical Centre Groningen
    P5 - Organ models, organoids and spheroids - 3D models for colorectal cancer treatment and personalized medicineOrgan models, organoids and spheroidsCharlotte JEMFER, CAPTuR UMR 1308

    topicG-02 Organ models, organoids and spheroids
    person_pinCharlotte JEMFER, CAPTuR UMR 1308
    P6 - Organ models, organoids and spheroids - Development and Characterisation of a three-dimensional model of Adrenocortical CarcinomaOrgan models, organoids and spheroidsSarah FEELY, Discipline of Pharmacology and Therapeutics, School of Medicine, National University of Ireland Galway, Ireland
    Padraig DONLON, Discipline of Pharmacology and Therapeutics, School of Medicine, National University of Ireland Galway, Ireland
    Abhay PANDIT, CURAM, Centre for Research in Medical Devices, Biomedical Science, National University of Ireland Galway, Ireland
    Michael Conall DENNEDY, Discipline of Pharmacology and Therapeutics, School of Medicine, National University of Ireland Galway, Ireland

    topicG-02 Organ models, organoids and spheroids
    person_pinSarah FEELY, Discipline of Pharmacology and Therapeutics, School of Medicine, National University of Ireland Galway, Ireland
    P7 - Organ models, organoids and spheroids - Practical approaches and optimization of a heterogeneous fluorescent tumoroid generation of ductal breast carcinoma in situ to study the impact of the adipose and inflammatory microenvironmentOrgan models, organoids and spheroidsOla HABANJAR, Université Clermont-Auvergne, INRAE, UNH, 63000 Clermont-Ferrand, France
    Anne-Catherine MAURIN, Université Clermont-Auvergne, INRAE, UNH, 63000 Clermont-Ferrand, France
    Cyrielle VITURET, Université Clermont-Auvergne, INRAE, UNH, 63000 Clermont-Ferrand, France
    Lucie LONGECHAMP, Université Clermont-Auvergne, INRAE, UNH, 63000 Clermont-Ferrand, France
    Cécile GARNIER, Université Clermont-Auvergne, INRAE, UNH, 63000 Clermont-Ferrand, France
    Caroline DECOMBAT, Université Clermont-Auvergne, INRAE, UNH, 63000 Clermont-Ferrand, France
    Céline BOURGNE, Plate-forme CMF, Service d’Hématologie biologique, CHU de Clermont-Ferrand, 63000 Clermont-Ferrand, France
    Céline AUXENFANS, Banque de tissus et de cellules, Hôpital Edouard-Herriot, France
    Mona DIAB-ASSAF, Equipe Tumorigénèse Pharmacologie moléculaire et anticancéreuse, Faculté des Sciences II, Université libanaise Fanar, Beyrouth, Liban
    Florence CALDEFIE-CHEZET, Université Clermont-Auvergne, INRAE, UNH, 63000 Clermont-Ferrand, France
    Laetitia DELORT, Université Clermont-Auvergne, INRAE, UNH, 63000 Clermont-Ferrand, France

    topicG-02 Organ models, organoids and spheroids
    person_pinOla HABANJAR, Université Clermont-Auvergne, INRAE, UNH, 63000 Clermont-Ferrand, France
    P8 - Organ models, organoids and spheroids - Mesenchymal stem cells pre-conditioning with IL-1beta as a potential immunomodulatory and anti-proteolytic therapy for annulus fibrosus failureOrgan models, organoids and spheroidsJoana FERREIRA, I3S, Instituto de Investigação e Inovação em Saúde, INEB, ICBAS, University of Porto
    Ana João SILVA, I3S, Instituto de Investigação e Inovação em Saúde, INEB
    Graciosa TEIXEIRA, Institute of Orthopaedic Research and Biomechanics, Ulm, Germany
    Cornelia NEIDLINGER-WILKE, Institute of Orthopaedic Research and Biomechanics, Ulm, Germany
    Susana SANTOS, I3S, Instituto de Investigação e Inovação em Saúde, INEB
    Joana CALDEIRA, I3S, Instituto de Investigação e Inovação em Saúde, INEB
    Mário BARBOSA, I3S, Instituto de Investigação e Inovação em Saúde, INEB, ICBAS, University of Porto
    Raquel GONCALVES, I3S, Instituto de Investigação e Inovação em Saúde, INEB, ICBAS, University of Porto

    topicG-02 Organ models, organoids and spheroids
    person_pinRaquel GONCALVES, I3S, Instituto de Investigação e Inovação em Saúde, INEB, ICBAS, University of Porto
    P9 - Organ models, organoids and spheroids - A hybrid dECM-alginate hydrogel to unveil the role of the microenvironment in EMT/MET Organ models, organoids and spheroidsPatrícia BARROS DA SILVA, I3S - Instituto de Inovação e Investigação em Saúde; INEB-Instituto de Engenharia Biomédica; FEUP – Faculdade de Engenharia da Universidade do Porto
    Sílvia BIDARRA, I3S - Instituto de Inovação e Investigação em Saúde;INEB-Instituto de Engenharia Biomédica; ICBAS-Instituto de Ciências Biomédicas Abel Salazar
    Diana NASCIMENTO, I3S - Instituto de Inovação e Investigação em Saúde;INEB-Instituto de Engenharia Biomédica; ICBAS-Instituto de Ciências Biomédicas Abel Salazar
    Bianca LOURENÇO, I3S - Instituto de Inovação e Investigação em Saúde; INEB-Instituto de Engenharia Biomédica;
    Cristina BARRIAS, I3S - Instituto de Inovação e Investigação em Saúde;INEB-Instituto de Engenharia Biomédica; ICBAS-Instituto de Ciências Biomédicas Abel Salazar

    topicG-02 Organ models, organoids and spheroids
    person_pinPatrícia BARROS DA SILVA, I3S - Instituto de Inovação e Investigação em Saúde; INEB-Instituto de Engenharia Biomédica; FEUP – Faculdade de Engenharia da Universidade do Porto
    P10 - Organ models, organoids and spheroids - In vitro development of a tissue-engineered cutaneous wound healing model made of diabetic patient cellsOrgan models, organoids and spheroidsMathias LEMARCHAND, LOEX, Centre de recherche du CHU de Québec-Université Laval ; Département de Chirurgie, Faculté de Médecine, Université Laval
    Thiéry DE SERRES-BÉRARD, LOEX, Centre de recherche du CHU de Québec-Université Laval ; Département de Chirurgie, Faculté de Médecine, Université Laval
    Sabrina BELLENFANT, LOEX, Centre de recherche du CHU de Québec-Université Laval ; Département de Chirurgie, Faculté de Médecine, Université Laval
    Todd GALBRAITH, LOEX, Centre de recherche du CHU de Québec-Université Laval ; Département de Chirurgie, Faculté de Médecine, Université Laval
    Yvan DOUVILLE, Département de Chirurgie, Faculté de Médecine, Université Laval
    François BERTHOD, LOEX, Centre de recherche du CHU de Québec-Université Laval ; Département de Chirurgie, Faculté de Médecine, Université Laval

    topicG-02 Organ models, organoids and spheroids
    person_pinMathias LEMARCHAND, LOEX, Centre de recherche du CHU de Québec-Université Laval ; Département de Chirurgie, Faculté de Médecine, Université Laval
    P12 - Organ models, organoids and spheroids - Engineering (sub)micron patterns for modulating the behavior of cancer spheroids Organ models, organoids and spheroidsMahdiyeh NOURI, Department of Chemical Engineering, Delft University of Technology, Delft, Netherlands
    Hendrik HUBBE, Department of Chemical Engineering, Delft University of Technology, Delft, Netherlands
    Ruben BOOT, Department of Chemical Engineering, Delft University of Technology, Delft, Netherlands
    Pouyan BOUKANY, Department of Chemical Engineering, Delft University of Technology, Delft, Netherlands

    topicG-02 Organ models, organoids and spheroids
    person_pinMahdiyeh NOURI, Department of Chemical Engineering, Delft University of Technology, Delft, Netherlands
    P1 - Robotics - A Closed-Loop Soft Robotic Drug Delivery System to Overcome the Foreign Body ResponseRoboticsLucien H.J. SCHREIBER, Anatomy and Regenerative Medicine Institute (REMEDI), School of Medicine, NUI Galway, Galway, Ireland.
    Rachel BEATTY, Anatomy and Regenerative Medicine Institute (REMEDI), School of Medicine, NUI Galway, Galway, Ireland; SFI Centre for Advanced Materials and BioEngineering Research (AMBER), Trinity College Dublin, Dublin, Ireland.
    Keegan L. MENDEZ, Harvard-MIT Program in Health Sciences and Technology, Cambridge, MA, USA.
    William WHYTE, Institute for Medical Engineering and Science, Massachusetts Institute of Technology, Cambridge, MA, USA.
    Yiling FAN, Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
    Scott T. ROBINSON, Anatomy and Regenerative Medicine Institute (REMEDI), School of Medicine, NUI Galway, Galway, Ireland; SFI Centre for Advanced Materials and BioEngineering Research (AMBER), Trinity College Dublin, Dublin, Ireland.
    Andrew J. SIMPKIN, School of Mathematics, Statistics and Applied Mathematics, NUI Galway, Galway, Ireland
    Ellen T. ROCHE, Harvard-MIT Program in Health Sciences and Technology, Cambridge, MA, USA; Institute for Medical Engineering and Science, Massachusetts Institute of Technology, Cambridge, MA, USA; Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
    Eimear B. DOLAN, Department of Biomedical Engineering, NUI Galway, Galway, Ireland
    Garry P. DUFFY, Anatomy and Regenerative Medicine Institute (REMEDI), School of Medicine, NUI Galway, Galway, Ireland; SFI Centre for Advanced Materials and BioEngineering Research (AMBER), Trinity College Dublin, Dublin, Ireland.

    topicH-02 Robotics
    person_pinLucien H.J. SCHREIBER, Anatomy and Regenerative Medicine Institute (REMEDI), School of Medicine, NUI Galway, Galway, Ireland.
    P2 - Robotics - DEVELOPMENT OF A FULLY PROGRAMMED WEARABLE PUMP TO ACTUATE A SOFT ROBOTIC MACROENCAPSULATION DEVICE FOR TYPE 1 DIABETESRoboticsGiulia LATTANZI, Discipline of Anatomy, School of Medicine, National University of Ireland Galway, Ireland
    Joanne O'DWEYER, Discipline of Anatomy, School of Medicine, National University of Ireland Galway, Ireland
    Dolan EIMEAR, Bioengineering, School of Engineering, National University of Ireland Galway, Ireland
    Liam BURKE, Discipline of Bacteriology, School of Medicine, National University of Ireland Galway, Ireland
    Garry DUFFY, REMEDI, School of Medicine, College of Medicine Nursing and Health Sciences, NUIG, Ireland; CÚRAM, Centre for Research in Medical Devices, National University of Ireland Galway, Ireland; Advanced Materials and BioEngineering Research Centre (AMBER), Trinity College Dublin, Ireland

    topicH-02 Robotics
    person_pinGiulia LATTANZI, Discipline of Anatomy, School of Medicine, National University of Ireland Galway, Ireland
    P1 - Composites - Dense Calcium Phosphates and Silk Fibroin Biocomposite for Restoration of Damaged EnamelCompositesVita ZALITE, Rudolfs Cimdins Riga Biomaterials Innovation and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Riga, Latvia
    Linda DAUGE, Rudolfs Cimdins Riga Biomaterials Innovation and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Riga, Latvia
    Janis LOCS, Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia

    topicA-05 Composites
    person_pinVita ZALITE, Rudolfs Cimdins Riga Biomaterials Innovation and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Riga, Latvia
    P2 - Composites - Antibacterial 3D-printed hybrid scaffolds for large bone defect repairCompositesXiuyuan SHI, Department of Materials, Imperial College London
    Agathe HEYRAUD, Department of Materials, Imperial College London
    Francesca TALLIA, Department of Materials, Imperial College London
    Julian JONES, Department of Materials, Imperial College London

    topicA-05 Composites
    person_pinXiuyuan SHI, Department of Materials, Imperial College London
    P3 - Composites - Bioactive Glass Reinforced Calcium Phosphate Bone Cement Composites CompositesOznur DEMIR-OGUZ, Riga Technical University
    Aldo Roberto BOCCACCINI, University of Erlangen-Nuremberg
    Dagnija LOCA, Riga Technical University

    topicA-05 Composites
    person_pinOznur DEMIR-OGUZ, Riga Technical University
    P4 - Composites - Freeze-cast Scaffolds for Bone Substitution: Influence of the Filler Rate on the Properties of Alginate/Amorphous Calcium Carbonate CompositesCompositesMarion MERLE, CIRIMAT, Université de Toulouse, CNRS, TOULOUSE INP - ENSIACET, 4 allée Emile Monso, Toulouse, France
    Christèle COMBES, CIRIMAT, Université de Toulouse, CNRS, TOULOUSE INP - ENSIACET, 4 allée Emile Monso, Toulouse, France
    Christian REY, CIRIMAT, Université de Toulouse, CNRS, TOULOUSE INP - ENSIACET, 4 allée Emile Monso, Toulouse, France
    Prescillia LAGARRIGUE, CIRIMAT, Université de Toulouse, CNRS, TOULOUSE INP - ENSIACET, 4 allée Emile Monso, Toulouse, France
    Christophe TENAILLEAU, CIRIMAT, Université de Toulouse, CNRS, Université Toulouse 3 - Paul Sabatier, 118 Route de Narbonne, Toulouse, France
    Benjamin DUPLOYER, CIRIMAT, Université de Toulouse, CNRS, Université Toulouse 3 - Paul Sabatier, 118 Route de Narbonne, Toulouse, France
    Jérémy SOULIÉ, CIRIMAT, Université de Toulouse, CNRS, TOULOUSE INP - ENSIACET, 4 allée Emile Monso, Toulouse, France

    topicA-05 Composites
    person_pinChristèle COMBES, CIRIMAT, Université de Toulouse, CNRS, TOULOUSE INP - ENSIACET, 4 allée Emile Monso, Toulouse, France
    P5 - Composites - In vitro characterisation of 3D plotted composites consisting of strontium-modified calcium phosphate cement and mesoporous bioactive glass functionalised with hypoxia-conditioned mediumCompositesRichard Frank RICHTER, Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine, TU Dresden, Dresden, Germany
    Corina VATER, Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine, TU Dresden, Dresden, Germany
    Paula KORN, Department of Oral and Maxillofacial Surgery, Charité - Universitätsmedizin Berlin, Corporate Member of Freie Universität Berlin, Humboldt-Universität zu Berlin, and Berlin Institute of Health, Berlin, Germany
    Tilman AHLFELD, Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine, TU Dresden, Dresden, Germany
    Michael GELINSKY, Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine, TU Dresden, Dresden, Germany
    Anja LODE, Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine, TU Dresden, Dresden, Germany

    topicA-05 Composites
    person_pinRichard Frank RICHTER, Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine, TU Dresden, Dresden, Germany
    P6 - Composites - A 3D, Dual-layer Scaffold for Dental Pulp RepairCompositesRyan CHEN, Han Biomedical Inc.
    CHANGHUI CHEN, Han Biomedical Inc.

    topicA-05 Composites
    person_pinCHANGHUI CHEN, Han Biomedical Inc.
    P8 - Composites - Microstructure, mechanical properties, and corrosion behavior of interpenetrating Mg-HA composite fabricated by liquid metal infiltrationCompositesCarmen H. ESCALERA, Instituto de Investigaciones de Materiales, UNAM, Mexico City, Mexico

    topicA-05 Composites
    person_pinCarmen H. ESCALERA, Instituto de Investigaciones de Materiales, UNAM, Mexico City, Mexico
    P9 - Composites - Biocompatibility, mechanical and degradation behavior of bioresorbable composite of PLA matrix reinforced by Mg fibers for orthopedic applicationsCompositesWahaaj ALI, IMDEA Materials Institute, Madrid 28906, Spain, Department of Material Science and Engineering, Universidad Carlos III de Madrid, Leganés, Madrid 28911, Spain, Meotec GmbH, Aachen 52068, Germany.
    Leon TILLMANN, Meotec GmbH, Aachen 52068, Germany
    Guillermo DOMINGUEZ, IMDEA Materials Institute, Madrid 28906, Spain
    Mónica ECHEVERRY-RENDÓN, IMDEA Materials Institute, Madrid 28906, Spain
    Alexander KOPP, Meotec GmbH, Aachen 52068, Germany
    Carlos GONZÁLEZ, IMDEA Materials Institute, Madrid 28906, Spain, Department of Materials Science, Polytechnic University of Madrid, 28040 Madrid, Spain
    Javier LLORCA, IMDEA Materials Institute, Madrid 28906, Spain, Department of Materials Science, Polytechnic University of Madrid, 28040 Madrid, Spain

    topicA-05 Composites
    person_pinWahaaj ALI, IMDEA Materials Institute, Madrid 28906, Spain, Department of Material Science and Engineering, Universidad Carlos III de Madrid, Leganés, Madrid 28911, Spain, Meotec GmbH, Aachen 52068, Germany.
    P10 - Composites - Fabrication of Renewable and Active CO2-derived Biocomposites by Green and Sustainable Water-based ProcessCompositesThi Nga TRAN, Faculty of Science and Engineering, Bernal Institute, University of Limerick, Limerick V94 T9PX, Ireland
    Michael MORRIS, School of Chemistry, Trinity College Dublin, The University of Dublin, Dublin 2, Ireland
    Maurice N COLLINS, Faculty of Science and Engineering, Bernal Institute, University of Limerick, Limerick V94 T9PX, Ireland

    topicA-05 Composites
    person_pinThi Nga TRAN, Faculty of Science and Engineering, Bernal Institute, University of Limerick, Limerick V94 T9PX, Ireland
    P12 - Composites - Development and 3D Printing of Bioabsorbable Polymer/Metal Composites for Orthopaedic ApplicationsCompositesCillian THOMPSON, IMDEA Materials Institute, Getafe, Madrid, Spain; Department of Material Science, Universidad Carlos III Leganes Campus, Leganes, Madrid, Spain; 3D Technology Ltd, Galway, Ireland
    Guillermo DOMÍNGUEZ, IMDEA Materials Institute, Getafe, Madrid, Spain; Universidad Politécnica de Madrid, Madrid, Spain
    Jimena DE LA VEGA, IMDEA Materials Institute, Getafe, Madrid, Spain
    Cristina PASCUAL-GONZÁLEZ, Área de Ciencia e Ingeniería de Materiales, Universidad Rey Juan Carlos, Mostoles, Madrid, Spain
    Mónica ECHEVERRY RENDÓN, IMDEA Materials Institute, Getafe, Madrid, Spain
    Carlos GONZÁLEZ, IMDEA Materials Institute, Getafe, Madrid, Spain; Universidad Politécnica de Madrid, Madrid, Spain
    Javier LLORCA, IMDEA Materials Institute, Getafe, Madrid, Spain; Universidad Politécnica de Madrid, Madrid, Spain

    topicA-05 Composites
    person_pinCillian THOMPSON, IMDEA Materials Institute, Getafe, Madrid, Spain; Department of Material Science, Universidad Carlos III Leganes Campus, Leganes, Madrid, Spain; 3D Technology Ltd, Galway, Ireland
    P13 - Composites - Optimization of composite electrospun fibers containing sol-gel B- and Cu-doped bioactive glass particles for soft tissue engineeringCompositesElisa PIATTI, Department of Applied Science and Technology, Politecnico di Torino, Turin, Italy
    Marta MIOLA, Department of Applied Science and Technology, Politecnico di Torino, Turin, Italy
    Liliana LIVERANI, Institute of Biomaterials, Department of Materials Science and Engineering, University of Erlangen-Nürnberg, Erlangen, Germany
    Aldo Roberto BOCCACCINI, Institute of Biomaterials, Department of Materials Science and Engineering, University of Erlangen-Nürnberg, Erlangen, Germany
    Enrica VERNÉ, Department of Applied Science and Technology, Politecnico di Torino, Turin, Italy

    topicA-05 Composites
    person_pinElisa PIATTI, Department of Applied Science and Technology, Politecnico di Torino, Turin, Italy
    P14 - Composites - Design and Characterization of a Functional Ti-PVA/PAAm-PVA Artificial Intervertebral Disc CompositesXiaoyu DU, ETH Zurich
    Lucia KÖLLE, ETH Zurich
    Delia SCHÜMPERLIN , ETH Zurich
    Stephen FERGUSON, ETH Zurich

    topicA-05 Composites
    person_pinXiaoyu DU, ETH Zurich
    P1 - Surface functionalization - Characterization of bio-functionalized 316L stainless steel substrates and in vitro study of their early stage influence on osteoblasts behaviorSurface functionalization Keerthana BALATHANDAYUTHAM, CY Cergy Paris Université
    Olivier GALLET, CY Cergy Paris Université
    Séverine ALFONSI, CY Cergy Paris Université
    Mathilde HINDIE, CY Cergy Paris Université

    topicB-01 Surface functionalization coatings, patterning
    person_pinMathilde HINDIE, CY Cergy Paris Université
    P2 - Surface functionalization - Exploiting the diagnostic potential of disorder: novel nanostructured platform for rapid, label-free and low-cost analysis of genomic DNASurface functionalization VALENTINA MUSSI, Institute for Microelectronics and Microsystems, National Research Council (CNR) 00133 Rome, Italy
    MARIO LEDDA, Institute of Translational Pharmacology, National Research Council (CNR) 00133 Rome, Italy
    LUCA MAIOLO, Institute for Microelectronics and Microsystems, National Research Council (CNR) 00133 Rome, Italy
    ANTONELLA LISI, Institute of Translational Pharmacology, National Research Council (CNR) 00133 Rome, Italy
    ANTONIO SCIORTINO, Institute for Microelectronics and Microsystems, National Research Council (CNR) 00133 Rome, Italy
    EMILIO NICOLA MARIA CIRILLO, Department of Basic and Applied Sciences for Engineering, Sapienza University, 00161 Rome, Italy
    CLAUDIO DURASTANTI, Department of Basic and Applied Sciences for Engineering, Sapienza University, 00161 Rome, Italy
    ANNALISA CONVERTINO, Institute for Microelectronics and Microsystems, National Research Council (CNR) 00133 Rome, Italy

    topicB-01 Surface functionalization coatings, patterning
    person_pinANTONIO SCIORTINO, Institute for Microelectronics and Microsystems, National Research Council (CNR) 00133 Rome, Italy
    P4 - Surface functionalization - Wound Healing through Therapeutic Layer-by-layer Skin Coatings Surface functionalization Elias HASAN, Newcastle University
    Piergiorgio GENTILE, Newcastle University
    Ana M. FERREIRA, Newcastle University

    topicB-01 Surface functionalization coatings, patterning
    person_pinElias HASAN, Newcastle University
    P5 - Surface functionalization - 3D polysaccharides-based hydrogel fabrication methods to guide cell behaviour.Surface functionalization Albane CARRÉ, INSERM U1148, LVTS, Université de Paris, X Bichât Hôpital, 46 rue H Huchard, F-75018 Paris, France
    Maria-Dimitria CHIOTELLI, INSERM U1148, LVTS, Université de Paris, X Bichât Hôpital, 46 rue H Huchard, F-75018 Paris, France
    Teresa SIMON-YARZA, INSERM U1148, LVTS, Université de Paris, X Bichât Hôpital, 46 rue H Huchard, F-75018 Paris, France

    topicB-01 Surface functionalization coatings, patterning
    person_pinAlbane CARRÉ, INSERM U1148, LVTS, Université de Paris, X Bichât Hôpital, 46 rue H Huchard, F-75018 Paris, France
    P7 - Surface functionalization - Additively Manufactured Titanium and Ceramic Materials Coated with Hydrogel for Surgical ApplicationsSurface functionalization Skirmantas NORKUS, Center for Physical Sciences and Technology, Department of Nanoengineering, Vilnius, Lithuania
    Romuald EIMONT, Center for Physical Sciences and Technology, Department of Nanoengineering, Vilnius, Lithuania
    Osvaldas GRUBYS, Ortho Baltic LLC, Kaunas, Lithuania
    Airina MAZETYTE GODIENE, Center for Physical Sciences and Technology, Department of Nanoengineering, Vilnius, Lithuania
    Vytautas CEPLA, Center for Physical Sciences and Technology, Department of Nanoengineering, Vilnius, Lithuania
    Tadas JELINSKAS, Ferentis LLC, Vilnius, Lithuania
    Ramunas VALIOKAS, Center for Physical Sciences and Technology, Department of Nanoengineering, Vilnius, Lithuania
    Brigita ABAKEVICIENE, Kaunas University of Technology, Department of Physics, Kaunas, Lithuania

    topicB-01 Surface functionalization coatings, patterning
    person_pinSkirmantas NORKUS, Center for Physical Sciences and Technology, Department of Nanoengineering, Vilnius, Lithuania
    P9 - Surface functionalization - Surface functionalization of ZrO2 ceramic substrate through biomimetic coatings containing drug-loaded nanoparticles to prevent implant-related infectionSurface functionalization Iwona PUDELKO, AGH University of Science and Technology, Department of Biomaterials and Composites, Kraków, Poland
    Gaelle DESANTE, RWTH Aachen University, Department of Ceramics and Refractory Materials, Aachen, Germany
    Elzbieta PAMULA, AGH University of Science and Technology, Department of Biomaterials and Composites, Kraków, Poland
    Karolina SCHICKLE, RWTH Aachen University, Department of Ceramics and Refractory Materials, Aachen, Germany
    Malgorzata KROK-BORKOWICZ, AGH University of Science and Technology, Department of Biomaterials and Composites, Kraków, Poland

    topicB-01 Surface functionalization coatings, patterning
    person_pinIwona PUDELKO, AGH University of Science and Technology, Department of Biomaterials and Composites, Kraków, Poland
    P10 - Surface functionalization - Multi-metal ions integrated in PEM-Collagen network for sustained release and improved Osteogenesis, angiogenesis effectsSurface functionalization Lu FAN, NMI Natural and Medical Sciences Institute at the University of Tübingen, Reutlingen, Germany
    Alexander RUDT, Faculty of applied chemistry, Reutlingen University, Alteburgstr. 150, 72762 Reutlingen, Germany
    Ole JUNG, University Medical center Rostock, Schillingallee 35, 18057 Rostock, Germany
    Mike BARBECK, University Medical center Rostock, Schillingallee 35, 18057 Rostock, Germany
    Rumen KRASTEV, NMI Natural and Medical Sciences Institute at the University of Tübingen, Reutlingen, Germany
    Xin XIONG, NMI Natural and Medical Sciences Institute at the University of Tübingen, Reutlingen, Germany

    topicB-01 Surface functionalization coatings, patterning
    person_pinLu FAN, NMI Natural and Medical Sciences Institute at the University of Tübingen, Reutlingen, Germany
    P11 - Surface functionalization - Modified Amino-silane coated Polycaprolactone for Peripheral Nerve RepairSurface functionalization Caroline TAYLOR, The University of Sheffield
    Joseph BARNES, The University of Liverpool
    David GREGORGY, The University of Sheffield
    James HENSTOCK, The University of Liverpool
    Raechelle D'SA, The University of Liverpool
    Ipsita ROY, The University of Sheffield
    Judith CURRAN, The University of Liverpool
    John HAYCOCK, The University of Sheffield

    topicB-01 Surface functionalization coatings, patterning
    person_pinCaroline TAYLOR, The University of Sheffield
    P12 - Surface functionalization - Assessing the efficacy of surface functionalised Manuka Honey on Electrospun Membranes for biomedical applicationsSurface functionalization Thomas HONEY, Newcastle University
    Piergiorgio GENTILE, Newcastle University
    Nicholas JACKUBOVICS, Newcastle University
    Dana OFITERU, Newcastle University

    topicB-01 Surface functionalization coatings, patterning
    person_pinThomas HONEY, Newcastle University
    P13 - Surface functionalization - Dual Functionalization of Dental Implants by Ultrafast Laser Texturing: How to Increase Gingival Fibroblast Adhesion and Limit Bacterial Biofilm FormationSurface functionalization Steve PAPA, INSERM, U1059-SAINBIOSE, University of Lyon, Jean Monnet University, F-42270 Saint Priest en Jarez, France
    Xxx SEDAO, GIE Manutech-USD, 20 rue Benoit Lauras, F-42000 Saint-Etienne ; UMR 5516 CNRS, Laboratory Hubert Curien, University of Lyon, Jean Monnet University, F-42000 Saint-Etienne
    Alain ABOU-KHALIL, UMR 5516 CNRS, Laboratory Hubert Curien, University of Lyon, Jean Monnet University, F-42000 Saint-Etienne
    Yoan DI MAIO, GIE Manutech-USD, 20 rue Benoit Lauras, F-42000 Saint-Etienne
    Mathieu MAALOUF , INSERM, U1059-SAINBIOSE, University of Lyon, Jean Monnet University, F-42270 Saint Priest en Jarez, France
    Alain GUIGNANDON, INSERM, U1059-SAINBIOSE, University of Lyon, Jean Monnet University, F-42270 Saint Priest en Jarez, France
    Virginie DUMAS, Laboratory of Tribology and Systems Dynamics, UMR 5513 CNRS, University of Lyon, National School of Engineers of Saint-Etienne, Lyon Central School, F-42100 Saint-Etienne, France

    topicB-01 Surface functionalization coatings, patterning
    person_pinSteve PAPA, INSERM, U1059-SAINBIOSE, University of Lyon, Jean Monnet University, F-42270 Saint Priest en Jarez, France
    P16 - Surface functionalization - Development and optimization of Micro-Arc Oxidation (MAO) coatings on AZ31 magnesium for improved biocorrosion behaviourSurface functionalization Matteo PAVARINI, Department of Chemistry, Materials and Chemical Engineering “G. Natta”, Politecnico di Milano
    Monica MOSCATELLI, Department of Chemistry, Materials and Chemical Engineering “G. Natta”, Politecnico di Milano
    Fabio VARIOLA, Department of Mechanical Engineering, University of Ottawa
    Roberto CHIESA, Department of Chemistry, Materials and Chemical Engineering “G. Natta”, Politecnico di Milano

    topicB-01 Surface functionalization coatings, patterning
    person_pinMatteo PAVARINI, Department of Chemistry, Materials and Chemical Engineering “G. Natta”, Politecnico di Milano
    P17 - Surface functionalization - Efficient production of cell-adhesive motif from Human Fibronectin domains to design a bio-functionalized scaffold for tissue engineeringSurface functionalization Amina BEN ABLA, EBInnov, Ecole de biologie industrielle (EBI), Cergy, France
    Guilhem BŒUF , EBInnov,Ecole de biologie industrielle (EBI), Cergy, France
    Sylvie CHANGOTADE, Unité de Recherche en Ingénierie Tissulaire (URIT), Université Paris 13, dénommée Université Sorbonne Paris Nord, Paris , France
    Géraldine ROHMAN, Unité de Recherche en Ingénierie Tissulaire (URIT), Université Paris 13, dénommée Université Sorbonne Paris Nord, Paris , France
    Didier LUTOMSKI, Unité de Recherche en Ingénierie Tissulaire (URIT), Université Paris 13, dénommée Université Sorbonne Paris Nord, Paris , France
    Abdellatif ELM’SEMI, EBInnov, Ecole de biologie industrielle (EBI), Cergy, France

    topicB-01 Surface functionalization coatings, patterning
    person_pinAmina BEN ABLA, EBInnov, Ecole de biologie industrielle (EBI), Cergy, France
    P18 - Surface functionalization - Amine-based coatings support the adhesion of osteoblast-like cells on titanium surfacesSurface functionalization Susanne SEEMANN, Department of Cell Biology, University Medical Center Rostock, 18057 Rostock, Germany
    Ricardo RAMOS, Institut de Science des Matériaux de Mulhouse, University of Haute Alsace, 68057 Mulhouse, France
    Manuela DUBS, Department of Biomaterials, INNOVENT e.V., Jena, Germany
    Annika WARTENBERG, Department of Biomaterials, INNOVENT e.V., Jena, Germany
    Susanne STAEHLKE, Department of Cell Biology, University Medical Center Rostock, 18057 Rostock, Germany
    Matthias SCHNABELRAUCH, Department of Biomaterials, INNOVENT e.V., Jena, Germany
    Karine ANSELME, Institut de Science des Matériaux de Mulhouse, University of Haute Alsace, 68057 Mulhouse, France
    J. Barbara NEBE, Department of Cell Biology, University Medical Center Rostock, 18057 Rostock, Germany

    topicB-01 Surface functionalization coatings, patterning
    person_pinSusanne SEEMANN, Department of Cell Biology, University Medical Center Rostock, 18057 Rostock, Germany
    P19 - Surface functionalization - A Process Optimisation Study of Multifunctional Bone Scaffold Materials Fabricated with Layer-by-Layer AssemblySurface functionalization MohammadAli SAHEBALZAMANI, Centre for Medical Engineering Research, School of Mechanical and Manufacturing Engineering, Dublin City University, Ireland
    Tanya LEVINGSTONE, Centre for Medical Engineering Research, School of Mechanical and Manufacturing Engineering, Dublin City University, Ireland
    Helen MCCARTHY, School of Pharmacy, Queen’s University Belfast, Belfast. United Kingdom
    Nicholas DUNNE, Centre for Medical Engineering Research, School of Mechanical and Manufacturing Engineering, Dublin City University, Ireland

    topicB-01 Surface functionalization coatings, patterning
    person_pinNicholas DUNNE, Centre for Medical Engineering Research, School of Mechanical and Manufacturing Engineering, Dublin City University, Ireland
    P20 - Surface functionalization - Structured Surfaces Mimicking in vivo Tissue ArchitectureSurface functionalization Petr HUMPOLICEK, Centre of Polymer Systems, Tomas Bata University in Zlin, Zlin, Czech Republic
    Antonin MINARIK, Centre of Polymer Systems, Tomas Bata University in Zlin, Zlin, Czech Republic
    Katerina SKOPALOVA, Centre of Polymer Systems, Tomas Bata University in Zlin, Zlin, Czech Republic

    topicB-01 Surface functionalization coatings, patterning
    person_pinPetr HUMPOLICEK, Centre of Polymer Systems, Tomas Bata University in Zlin, Zlin, Czech Republic
    P21 - Surface functionalization - Deposition Of Natural Biopolymers Via Atmospheric Plasma TorchSurface functionalization Artem ARKHANGELSKIY, Department of Industrial Engineering and Biotech Center for Biomedical Technologies, University of Trento, Trento, Italy
    Alberto QUARANTA, Department of Industrial Engineering, University of Trento, Trento, Italy
    Antonella MOTTA, Department of Industrial Engineering and Biotech Center for Biomedical Technologies, University of Trento, Trento, Italy
    Yuejiao YANG, Department of Industrial Engineering and Biotech Center for Biomedical Technologies, University of Trento, Trento, Italy
    Yadavalli VAMSI, 3Department of Chemical and Life Science Engineering, Virginia Commonwealth University, Richmond VA, USA
    Devid MANIGLIO, Department of Industrial Engineering and Biotech Center for Biomedical Technologies, University of Trento, Trento, Italy

    topicB-01 Surface functionalization coatings, patterning
    person_pinDevid MANIGLIO, Department of Industrial Engineering and Biotech Center for Biomedical Technologies, University of Trento, Trento, Italy
    P22 - Surface functionalization - Physicochemical and mechanical properties of Ti6Al7Nb alloy with nitrocarburized layer after sterilization, and exposure to Ringer's solutionSurface functionalization Anita KAJZER, Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    Wojciech KAJZER, Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    Micha? TARNOWSKI, Faculty of Materials Science and Engineering, Warsaw University of Technology, Warsaw, Poland
    Tomasz BOROWSKI, Faculty of Materials Science and Engineering, Warsaw University of Technology, Warsaw, Poland
    Tadeusz WIERZCHON, Faculty of Materials Science and Engineering, Warsaw University of Technology, Warsaw, Poland

    topicB-01 Surface functionalization coatings, patterning
    person_pinWojciech KAJZER, Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    P23 - Surface functionalization - Anti-encrustation functionalization of CoCrMo alloy with biodegradable polymer coatingsSurface functionalization Wojciech KAJZER, Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, 41-800 Zabrze, Poland
    Janusz SZEWCZENKO, Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, 41-800 Zabrze, Poland
    Anita KAJZER, Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, 41-800 Zabrze, Poland
    Marcin BASIAGA, Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, 41-800 Zabrze, Poland
    Joanna JAWORSKA, Centre of Polymer and Carbon Materials, Polish Academy of Sciences, 41-819 Zabrze, Poland
    Katarzyna JELONEK, Centre of Polymer and Carbon Materials, Polish Academy of Sciences, 41-819 Zabrze, Poland
    Katarzyna NOWINSKA, Department of Applied Geology, Faculty of Mining, Safety Engineering and Industrial Automation, Silesian University of Technology, 44-100 Gliwice, Poland
    Marcin KACZMAREK, Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, 41-800 Zabrze, Poland

    topicB-01 Surface functionalization coatings, patterning
    person_pinWojciech KAJZER, Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, 41-800 Zabrze, Poland
    P24 - Surface functionalization - Antimicrobial Coating of Metal Surfaces Using Surface Immobilized PeptidesSurface functionalization Mohadeseh ZARE, University of Birmingham
    Diana GOMES, University of Birmingham
    Artemis STAMBOULIS, University of Birmingham

    topicB-01 Surface functionalization coatings, patterning
    person_pinMohadeseh ZARE, University of Birmingham
    P25 - Surface functionalization - Solid-state dewetting of thin Au films as a tool for Ti-6Al-4V surface bioactivationSurface functionalization Aliya SHARIPOVA, Department of Material Science and Engineering, Technion – Israel Institute of Technology, Haifa, Israel
    Ivan ZLOTVER, Department of Material Science and Engineering, Technion – Israel Institute of Technology, Haifa, Israel
    Eugen RABKIN, Department of Material Science and Engineering, Technion – Israel Institute of Technology, Haifa, Israel
    Alejandro SOSNIK, Department of Material Science and Engineering, Technion – Israel Institute of Technology, Haifa, Israel

    topicB-01 Surface functionalization coatings, patterning
    person_pinIvan ZLOTVER, Department of Material Science and Engineering, Technion – Israel Institute of Technology, Haifa, Israel
    P26 - Surface functionalization - Properties of the Poly (D, L-lactide-glycolide) coating containing hydroxyapatite applied by ultrasound on an anodized Ti6Al7Nb substrateSurface functionalization Janusz SZEWCZENKO, Department of Biomaterials and Medical Device Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    Karolina GOLDSZTAJN, Department of Biomaterials and Medical Device Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    Marcin GODZIERZ, Centre of Polymer and Carbon Materials of the Polish Academy of Sciences, Zabrze, Poland
    Anna HERCOG, Centre of Polymer and Carbon Materials of the Polish Academy of Sciences, Zabrze, Poland
    Joanna JAWORSKA, Centre of Polymer and Carbon Materials of the Polish Academy of Sciences, Zabrze, Poland
    Katarzyna JELONEK, Centre of Polymer and Carbon Materials of the Polish Academy of Sciences, Zabrze, Poland
    Roman MAJOR, Institute of Metallurgy and Materials Science of the Polish Academy of Sciences, Kraków, Poland
    Marcin BASIAGA, Department of Biomaterials and Medical Device Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    Wojciech KAJZER, Department of Biomaterials and Medical Device Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    Julia LISON, Department of Biomaterials and Medical Device Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    Anna WOZNIAK, Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Gliwice, Poland
    Marcin KACZMAREK, Department of Biomaterials and Medical Device Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland

    topicB-01 Surface functionalization coatings, patterning
    person_pinJanusz SZEWCZENKO, Department of Biomaterials and Medical Device Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland
    P28 - Surface functionalization - Texturing Ti6Al4V surfaces with hierarchical structures on the micro/nano scale by ultra-short laser: effect on pathogen adhesion and colonizationSurface functionalization Michela SANGUEDOLCE, Department of Mechanical, Energy and Management Engineering, University of Calabria, Rende, Italy
    Patrizia D'AQUILA, Department of Biology, Ecology and Earth Sciences, University of Calabria, Rende, Italy
    Barbara REGGIANI, Department of Science and Methods for Engineering, University of Modena and Reggio Emilia, Reggio Emilia, Italy
    Dina BELLIZZI, Department of Biology, Ecology and Earth Sciences, University of Calabria, Rende, Italy
    Leonardo ORAZI, Department of Science and Methods for Engineering, University of Modena and Reggio Emilia, Reggio Emilia, Italy
    Gerardo CATAPANO, Department of Mechanical, Energy and Management Engineering, University of Calabria, Rende, Italy
    Luigino FILICE, Department of Mechanical, Energy and Management Engineering, University of Calabria, Rende, Italy

    topicB-01 Surface functionalization coatings, patterning
    person_pinMichela SANGUEDOLCE, Department of Mechanical, Energy and Management Engineering, University of Calabria, Rende, Italy
    P29 - Surface functionalization - Nucleic acid activated surface coatings designed to induce osteogenic differentiation of stem cellsSurface functionalization Christian WÖLK, Pharmaceutical Technology, Institute of Pharmacy, Faculty of Medicine, Leipzig University, 04317, Leipzig, Germany

    topicB-01 Surface functionalization coatings, patterning
    person_pinChristian WÖLK, Pharmaceutical Technology, Institute of Pharmacy, Faculty of Medicine, Leipzig University, 04317, Leipzig, Germany
    P30 - Surface functionalization - Formulation of an Acid-Resistant Histidine Ammonia Lyase as a Model for Oral Delivery of EnzymesSurface functionalization Thaís MARCELINO, Interdisciplinary Nanoscience Center (iNANO), Aarhus University and Sino-Danish Center for Education and Research
    Carina ADE, Interdisciplinary Nanoscience Center (iNANO), Aarhus University
    Xiaomin QIAN, Interdisciplinary Nanoscience Center (iNANO), Aarhus University
    Mark DULCHAVSKY, Department of Molecular, Cellular, and Developmental Biology and Howard Hughes Medical Institute, University of Michigan
    James BARDWELL , Department of Molecular, Cellular, and Developmental Biology and Howard Hughes Medical Institute, University of Michigan
    Brigitte STÄDLER, Interdisciplinary Nanoscience Center (iNANO), Aarhus University

    topicB-01 Surface functionalization coatings, patterning
    person_pinThaís MARCELINO, Interdisciplinary Nanoscience Center (iNANO), Aarhus University and Sino-Danish Center for Education and Research
    P31 - Surface functionalization - Layer-by-Layer assembly of ECM based biological macromolecules onto Ti alloy for tackling related bone implant infectionsSurface functionalization Anjaneyulu UDDUTTULA, School of Engineering, Newcastle University, Newcastle Upon Tyne NE1 7RU, United Kingdom
    Jakubovics NICHOLAS, School of Dental Sciences, Faculty of Medical Sciences, Newcastle University, United Kingdom
    Khan IMRAN, Zimmer-Biomet UK Limited, Dorcan Industrial Estate, Swindon SN3 5HY, United Kingdom
    Pontiroli LUCIA, Zimmer-Biomet UK Limited, Dorcan Industrial Estate, Swindon SN3 5HY, United Kingdom
    Rankin KENNETH S, Translational and Clinical Research Institute, Faculty of Medical Sciences, Newcastle University, NE2 4HH, United Kingdom
    Gentile PIERGIORGIO, School of Engineering, Newcastle University, Newcastle Upon Tyne NE1 7RU, United Kingdom
    Ferreira ANA M, School of Engineering, Newcastle University, Newcastle Upon Tyne NE1 7RU, United Kingdom

    topicB-01 Surface functionalization coatings, patterning
    person_pinAnjaneyulu UDDUTTULA, School of Engineering, Newcastle University, Newcastle Upon Tyne NE1 7RU, United Kingdom
    P33 - Surface functionalization - Disordered ligand micropatterning to promote osteoblast differentiationSurface functionalization Yujie ZHANG, 1Université de Bordeaux, Chimie et Biologie des Membranes et Nano-Objets (UMR5248 CBMN), Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac, France, 2CNRS, CBMN UMR5248, Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac, France,3 Bordeaux INP, CBMN UMR5248, Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac
    Murielle REMY, 1Université de Bordeaux, Chimie et Biologie des Membranes et Nano-Objets (UMR5248 CBMN), Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac, France, 2CNRS, CBMN UMR5248, Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac, France,3 Bordeaux INP, CBMN UMR5248, Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac
    Christel CHANSEAU, Université de Bordeaux, Chimie et Biologie des Membranes et Nano-Objets (UMR5248 CBMN), Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac, France, 2CNRS, CBMN UMR5248, Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac, France,3 Bordeaux INP, CBMN UMR5248, Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac
    Cécile FEUILLIE, Université de Bordeaux, Chimie et Biologie des Membranes et Nano-Objets (UMR5248 CBMN), Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac, France, 2CNRS, CBMN UMR5248, Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac, France,3 Bordeaux INP, CBMN UMR5248, Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac
    Christine LABRUGERE, 4 PLACAMAT, Université Bordeaux, CNRS, France
    Nithavong CAM, 4 PLACAMAT, Université Bordeaux, CNRS, France
    Marie-Christine DURRIEU, 1Université de Bordeaux, Chimie et Biologie des Membranes et Nano-Objets (UMR5248 CBMN), Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac, France, 2CNRS, CBMN UMR5248, Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac, France,3 Bordeaux INP, CBMN UMR5248, Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac

    topicB-01 Surface functionalization coatings, patterning
    person_pinYujie ZHANG, 1Université de Bordeaux, Chimie et Biologie des Membranes et Nano-Objets (UMR5248 CBMN), Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac, France, 2CNRS, CBMN UMR5248, Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac, France,3 Bordeaux INP, CBMN UMR5248, Allée Geoffroy Saint Hilaire - Bât B14, 33600 Pessac
    P35 - Surface functionalization - Human growth factor preparations did not affect local inflammatory tissue response following implantation in a rat animal model Surface functionalization Michael SCHLOSSER, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    Charlotte KOPPE, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    Christopher POHL, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    Nico BRANDT, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    Andreas HOENE, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    Uwe WALSCHUS, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    Olga HAHN, University Medical Center Rostock, Department of Cell Biology,
    Kirsten PETERS, University Medical Center Rostock, Department of Cell Biology,
    Karin SCHUSTER, DOT GmbH, Rostock, Germany
    Jens VAN DEN BRANDT, Central service and research facility for laboratory animals
    Sabine BERG, Central service and research facility for laboratory animals
    Hans-Georg NEUMANN, DOT GmbH, Rostock, Germany
    Cornelia PRINZ, DOT GmbH, Rostock, Germany

    topicB-01 Surface functionalization coatings, patterning
    person_pinMichael SCHLOSSER, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    P36 - Surface functionalization - Application of Collagen-immobilized PDMS Substrate for Cell Stretching Surface functionalization Kazuaki MORI, Graduate School of Advanced Science and Engineering, Waseda University
    Kosuke KATAOKA, Comprehensive Research Organization, Waseda University
    Yoshikatsu AKIYAMA, Institute of Advanced Biomedical Engineering and Science, Tokyo Women's Medical University
    Toru ASAHI, Graduate School of Advanced Science and Engineering, Waseda University. Comprehensive Research Organization, Waseda University. Research Organization for Nano & Life Innovation, Waseda University.

    topicB-01 Surface functionalization coatings, patterning
    person_pinKazuaki MORI, Graduate School of Advanced Science and Engineering, Waseda University
    P38 - Surface functionalization - Biological activation of the surfaces of dental implant-abutment materials Y-TZP and Ti6Al4V by hydrolytically stable immobilization of fibronectin and laminin Surface functionalization Alena PALKOWITZ, Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
    Taskin TUNA, Department of Prosthodontics and Biomaterials, RWTH Aachen University Hospital, Aachen, Germany
    Shaza BISHTI, Department of Prosthodontics and Biomaterials, RWTH Aachen University Hospital, Aachen, Germany
    Nathalie STEINKE, Flow Cytometry Facility, IZKF, Faculty of Medicine of RWTH Aachen University, Aachen, Germany
    Gerhard MÜLLER-NEWEN, Institute of Biochemistry and Molecular Biology, RWTH Aachen University Hospital, Aachen, Germany
    Stefan WOLFART, Department of Prosthodontics and Biomaterials, RWTH Aachen University Hospital, Aachen, Germany
    Horst FISCHER, Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany

    topicB-01 Surface functionalization coatings, patterning
    person_pinAlena PALKOWITZ, Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
    P1 - Antimicrobial - CONCEPTION AND EVALUATION OF AN ANTIBACTERIAL / VIRUCIDAL SURGICAL MASK AGAINST SARS-CoV-2 (COVID-19)AntimicrobialMickaël MATON, Univ. Lille, INSERM, CHU Lille, U1008, Advance Drug Delivery System, Lille, France
    Sarah GABUT, Univ. Lille, INSERM, CHU Lille, U1008, Advance Drug Delivery System, Lille, France
    Gaétan GERBER, Bioserenity, 47 bd de l’Hôpital, Paris, France
    Christel NEUT, Univ. Lille, INSERM, CHU Lille, U1286, Institute for Translational Research in Inflammation, Lille, France
    Marc FROUIN, Bioserenity, 47 bd de l’Hôpital, Paris, France
    Michèle VIALETTE, Unité de Sécurité Microbiologique, Institut Pasteur de Lille, Lille, France
    Camille SACAREAU, Unité de Sécurité Microbiologique, Institut Pasteur de Lille, Lille, France
    Pascal ODOU, Univ. Lille, CHU Lille, ULR 7365 - GRITA, Lille, France
    Bernard MARTEL, Univ. Lille, CNRS UMR8207, UMET – Unité Matériaux et transformations, Villeneuve D’Ascq, France
    Nicolas BLANCHEMAIN, Univ. Lille, INSERM, CHU Lille, U1008, Advance Drug Delivery System, Lille, France

    topicC-02 Antimicrobial
    person_pinMickaël MATON, Univ. Lille, INSERM, CHU Lille, U1008, Advance Drug Delivery System, Lille, France
    P2 - Antimicrobial - Microfluidic Fabrication of Dhvar5-Chitosan Nanogels to Fight Orthopedic Device-Related InfectionsAntimicrobialBruna COSTA, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal; FEUP–Faculdade de Engenharia, Universidade do Porto, Porto, Portugal
    Pedro ALVES, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal; FEUP–Faculdade de Engenharia, Universidade do Porto, Porto, Portugal
    Diana FONSECA, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal; FEUP–Faculdade de Engenharia, Universidade do Porto, Porto, Portugal
    Ruben PEREIRA, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal; ICBAS – Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, Porto, Portugal
    Fabíola COSTA, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal;
    Paula GOMES, CIQ-UP e Centro de Investigação em Química, Departamento de Química e Bioquímica, Faculdade de Ciências, Universidade do Porto, Porto, Portugal
    Guillermo MARTÍNEZ-DE-TEJADA, Department of Microbiology and Parasitology, University of Navarra, Pamplona, Spain; Navarra Institute for Health Research (IdiSNA), Pamplona, Spain
    Claudia MONTEIRO, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal;
    Maria Cristina MARTINS, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal; ICBAS – Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, Porto, Portugal

    topicC-02 Antimicrobial
    person_pinBruna COSTA, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Porto, Portugal; FEUP–Faculdade de Engenharia, Universidade do Porto, Porto, Portugal
    P3 - Antimicrobial - Salt-assisted compaction for the design of biocompatible albumin materials for the sustained delivery of antibacterial moleculesAntimicrobialEya ALOUI, Laboratoire de Conception et Application de Molécules Bioactives, CNRS UMR 7199, University of Strasbourg, Illkirch, France
    Jordan BEURTON, Laboratoire de Conception et Application de Molécules Bioactives, CNRS UMR 7199, University of Strasbourg, Illkirch, France
    Ludivine HUGONI, Laboratoire de Conception et Application de Molécules Bioactives, CNRS UMR 7199, University of Strasbourg, Illkirch, France
    Claire MEDEMBLIK, Laboratoire de Biomatériaux et Bioingénierie, INSERM UMR 1121, University of Strasbourg, Strasbourg, France
    Benoit FRISCH, Laboratoire de Conception et Application de Molécules Bioactives, CNRS UMR 7199, University of Strasbourg, Illkirch, France
    Philippe LAVALLE, Laboratoire de Biomatériaux et Bioingénierie, INSERM UMR 1121, University of Strasbourg, Strasbourg, France

    topicC-02 Antimicrobial
    person_pinEya ALOUI, Laboratoire de Conception et Application de Molécules Bioactives, CNRS UMR 7199, University of Strasbourg, Illkirch, France
    P4 - Antimicrobial - Development of new antimicrobial peptides by recombinant protein technology to functionalize orthopedic biomaterialsAntimicrobialCristina CANTALLOPS, CERAMATHS-DMP, UPHF
    Anne LERICHE, CERAMATHS-DMP, UPHF
    Franck BOUCHART, CERAMATHS-DMP, UPHF
    Edwige MEURICE, CERAMATHS-DMP, UPHF

    topicC-02 Antimicrobial
    person_pinEdwige MEURICE, CERAMATHS-DMP, UPHF
    P5 - Antimicrobial - Development of antibiofilm compress with natural active ingredient for the treatment of infected woundsAntimicrobialDamien SEYER, Equipe de Recherche sur les Relations Matrice Extracellulaire Cellules, CY Cergy-Paris Université, Cergy-Pontoise, France
    Maxime GOBIN, Equipe de Recherche sur les Relations Matrice Extracellulaire Cellules, CY Cergy-Paris Université, Cergy-Pontoise, France / Les laboratoires Brothier, Nanterre 92735, France
    Céline DES COURTILS, Les laboratoires Brothier, Nanterre 92735, France
    Stéphane LACK, Les laboratoires Brothier, Nanterre 92735, France
    Laura DUCIEL, Les laboratoires Brothier, Nanterre 92735, France
    Adeline GAND, Equipe de Recherche sur les Relations Matrice Extracellulaire Cellules, CY Cergy-Paris Université, Cergy-Pontoise, France
    Emmanuel PAUTHE, Equipe de Recherche sur les Relations Matrice Extracellulaire Cellules, CY Cergy-Paris Université, Cergy-Pontoise, France

    topicC-02 Antimicrobial
    person_pinDamien SEYER, Equipe de Recherche sur les Relations Matrice Extracellulaire Cellules, CY Cergy-Paris Université, Cergy-Pontoise, France
    P6 - Antimicrobial - Contact inactivation of human adenovirus type 5 by silicon nitride ceramicsAntimicrobialIoannis KATSAROS, Division of Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Sweden
    Anette CARLSSON, Department of Medical Biochemistry and Microbiology, Uppsala University, Sweden
    Cecilia PERSSON, Division of Biomedical Engineering, Department of Materials Science and Engineering, Uppsala University, Sweden
    Göran AKUSJÄRVI, Department of Medical Biochemistry and Microbiology, Uppsala University, Sweden
    Wei XIA, Division of Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Sweden
    Håkan ENGQVIST, Division of Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Sweden

    topicC-02 Antimicrobial
    person_pinIoannis KATSAROS, Division of Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Sweden
    P7 - Antimicrobial - Palladium nanoparticles as bactericidal agent obtained by laser ablation in liquidsAntimicrobialMónica FERNÁNDEZ-ARIAS, LaserOn Research Group, CINTECX, School of Engineering, UVIGO, Vigo, Spain
    Ana María VILAS, LaserOn Research Group, CINTECX, School of Engineering, UVIGO, Vigo, Spain
    Mohamed BOUTINGUIZA, LaserOn Research Group, CINTECX, School of Engineering, UVIGO, Vigo, Spain
    Daniel RODRÍGUEZ, Materials Science and Metallurgical Engineering Dept., UPC-Barcelona TECH, Barcelona, Spain
    Felipe ARIAS-GONZÁLEZ4, School of Dentistry, Universitat Internacional de Catalunya, Barcelona, Spain
    Pablo POU-ÁLVAREZ1, LaserOn Research Group, CINTECX, School of Engineering, UVIGO, Vigo, Spain
    Antonio RIVEIRO, LaserOn Research Group, CINTECX, School of Engineering, UVIGO, Vigo, Spain
    Francisco Javier GIL, School of Dentistry, Universitat Internacional de Catalunya, Barcelona, Spain
    Juan POU, LaserOn Research Group, CINTECX, School of Engineering, UVIGO, Vigo, Spain

    topicC-02 Antimicrobial
    person_pinFelipe ARIAS-GONZÁLEZ4, School of Dentistry, Universitat Internacional de Catalunya, Barcelona, Spain
    P8 - Antimicrobial - Antibacterial CATH-2 Peptide Coating to Prevent Implant Related InfectionAntimicrobialPardis KEIKHOSRAVANI, Department of Orthopedics, University Medical Center Utrecht, Utrecht, The Netherlands
    Fatemeh JAHANMARD, Department of Orthopedics, University Medical Center Utrecht, Utrecht, The Netherlands
    Leonardo CECOTTO, Department of Orthopedics, University Medical Center Utrecht, Utrecht, The Netherlands
    Azin KHODAEI, Department of Orthopedics, University Medical Center Utrecht, Utrecht, The Netherlands
    Floris BIKKER, Department of Oral Biochemistry, Academic Center for Dentistry Amsterdam (ACTA), the Netherlands
    Kamran NAZMI, Department of Oral Biochemistry, Academic Center for Dentistry Amsterdam (ACTA), the Netherlands
    Bart VAN DER WAL, Department of Orthopedics, University Medical Center Utrecht, Utrecht, The Netherlands
    Charls VOGELY, Department of Orthopedics, University Medical Center Utrecht, Utrecht, The Netherlands
    Enrico MASTROBATTISTA, Department of Pharmaceutical Sciences, Utrecht University, Utrecht, The Netherlands
    Harrie WEINANS, Department of Orthopedics, University Medical Center Utrecht, Utrecht, The Netherlands
    Saber AMIN YAVARI, Department of Orthopedics, University Medical Center Utrecht, Utrecht, The Netherlands

    topicC-02 Antimicrobial
    person_pinPardis KEIKHOSRAVANI, Department of Orthopedics, University Medical Center Utrecht, Utrecht, The Netherlands
    P9 - Antimicrobial - Mechanical and antimicrobial properties study of stainless steels for medical applicationsAntimicrobialAnna TARATUTA, Silesian University of Technology
    Magdalena ANTONOWICZ, Silesian University of Technology
    Alicja KAZEK-K?SIK, Silesian University of Technology
    Zbigniew PASZENDA, Silesian University of Technology
    Marcin BASIAGA, Silesian University of Technology

    topicC-02 Antimicrobial
    person_pinMarcin BASIAGA, Silesian University of Technology
    P10 - Antimicrobial - Plasma-derived fibrin hydrogels containing graphene oxide for infections treatmentAntimicrobialAriadna BACHILLER, Department of Bioengineering & Aerospace Engineering, Universidad Carlos III de Madrid, Leganés, Spain
    Juan Pedro FERNÁNDEZ, Institute IMDEA Materials, Getafe, Spain
    Yuta NISHINA, Graduate School of Natural Science and Technology, Okayama University, Okayama, Japan. Research Core for Interdisciplinary Sciences, Okayama University, Okayama, Japan
    José Luis JORCANO, Department of Bioengineering & Aerospace Engineering, Universidad Carlos III de Madrid, Leganés, Spain
    Cristina MARTÍN, Department of Bioengineering & Aerospace Engineering, Universidad Carlos III de Madrid, Leganés, Spain

    topicC-02 Antimicrobial
    person_pinCristina MARTÍN, Department of Bioengineering & Aerospace Engineering, Universidad Carlos III de Madrid, Leganés, Spain
    P12 - Antimicrobial - Hollow bioactive glass nanoparticles for bone disease treatmentAntimicrobialSANDRA SANCHEZ-SALCEDO, Departamento de Química en Ciencias Farmacéuticas, Facultad de Farmacia, Universidad Complutense de Madrid, UCM, Instituto de Investigación Hospital 12 de Octubre, imas12, 28040 Madrid, España.
    JAVIER JIMÉNEZ-HOLGUÍN, Facultad de Farmacia, Universidad Complutense de Madrid, UCM; Instituto de Investigación Hospital 12 de Octubre, imas12, 28040 Madrid, Spain
    MONICA CICUÉNDEZ, Facultad de Farmacia, Universidad Complutense de Madrid, UCM
    MARIA VALLET-REGI, Facultad de Farmacia, Universidad Complutense de Madrid, UCM; Instituto de Investigación Hospital 12 de Octubre, imas12, 28040 Madrid, Spain
    ANTONIO SALINAS, Facultad de Farmacia, Universidad Complutense de Madrid, UCM; Instituto de Investigación Hospital 12 de Octubre, imas12, 28040 Madrid, Spain

    topicC-02 Antimicrobial
    person_pinANTONIO SALINAS, Facultad de Farmacia, Universidad Complutense de Madrid, UCM; Instituto de Investigación Hospital 12 de Octubre, imas12, 28040 Madrid, Spain
    P13 - Antimicrobial - PexigananA-grafted onto chitosan nanoparticles using one-pot microfluidic system to eradicate Helicobacter pylori, the gastric queenAntimicrobialDiana R. FONSECA, i3S – Instituto de Investigação e Inovação em Saúde da Universidade do Porto - Associação, Porto, Portugal; Instituto de Engenharia Biomédica, Universidade do Porto, R. Alfredo Allen 208, 4200-135, Porto, Portugal; Faculdade de Engenharia, Departamento de Engenharia Metalúrgica e de Materiais, Universidade do Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
    Estrela NETO, i3S – Instituto de Investigação e Inovação em Saúde da Universidade do Porto - Associação, Porto, Portugal; Instituto de Engenharia Biomédica, Universidade do Porto, R. Alfredo Allen 208, 4200-135, Porto, Portugal
    Beatriz CUSTÓDIO, i3S – Instituto de Investigação e Inovação em Saúde da Universidade do Porto - Associação, Porto, Portugal; Instituto de Engenharia Biomédica, Universidade do Porto, R. Alfredo Allen 208, 4200-135, Porto, Portugal; ICBAS—Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, 4050-313 Porto, Portugal
    Sofia GUIMARÃES, i3S – Instituto de Investigação e Inovação em Saúde da Universidade do Porto - Associação, Porto, Portugal; Instituto de Engenharia Biomédica, Universidade do Porto, R. Alfredo Allen 208, 4200-135, Porto, Portugal
    Francesca ANNIS, i3S – Instituto de Investigação e Inovação em Saúde da Universidade do Porto - Associação, Porto, Portugal; Instituto de Engenharia Biomédica, Universidade do Porto, R. Alfredo Allen 208, 4200-135, Porto, Portugal
    Paulo FREITAS, INL- International Iberian Nanotechnology Laboratory, Braga, Portugal; INESC-MN-INESC Microsystems and Nanotechnologies, Lisboa, Portugal
    Cátia TEIXEIRA, LAQV-REQUIMTE, Departamento de Química e Bioquímica, Faculdade de Ciências, Universidade do Porto, Portugal
    Paula GOMES, LAQV-REQUIMTE, Departamento de Química e Bioquímica, Faculdade de Ciências, Universidade do Porto, Portugal
    Paula PARREIRA, i3S – Instituto de Investigação e Inovação em Saúde da Universidade do Porto - Associação, Porto, Portugal; Instituto de Engenharia Biomédica, Universidade do Porto, R. Alfredo Allen 208, 4200-135, Porto, Portugal
    M Cristina L MARTINS, i3S – Instituto de Investigação e Inovação em Saúde da Universidade do Porto - Associação, Porto, Portugal; Instituto de Engenharia Biomédica, Universidade do Porto, R. Alfredo Allen 208, 4200-135, Porto, Portugal; ICBAS—Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, 4050-313 Porto, Portugal

    topicC-02 Antimicrobial
    person_pinDiana R. FONSECA, i3S – Instituto de Investigação e Inovação em Saúde da Universidade do Porto - Associação, Porto, Portugal; Instituto de Engenharia Biomédica, Universidade do Porto, R. Alfredo Allen 208, 4200-135, Porto, Portugal; Faculdade de Engenharia, Departamento de Engenharia Metalúrgica e de Materiais, Universidade do Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
    P18 - Antimicrobial - IN VITRO MICROBIOLOGICAL EVALUATION OF A CHITOSAN/POLYCYCLODEXTRIN/CINNAMALDEHYDE HYDROGEL FOR DIABETIC FOOT ULCERS TREATMENTAntimicrobialHenry CHIJCHEAPAZA-FLORES, Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems (ADDS), F-59000 Lille, France
    Maria José GARCIA-FERNANDEZ, Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems (ADDS), F-59000 Lille, France
    Mickael MATON, Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems (ADDS), F-59000 Lille, France
    Jean-Noël STAELENS , Univ. Lille, CNRS, INRAE, Centrale Lille, UMR 8207 – Unité Matériaux et transformations (UMET), F-59000 Lille, France
    Nicolas TABARY, Univ. Lille, CNRS, INRAE, Centrale Lille, UMR 8207 – Unité Matériaux et transformations (UMET), F-59000 Lille, France
    Frédéric CAZAUX , Univ. Lille, CNRS, INRAE, Centrale Lille, UMR 8207 – Unité Matériaux et transformations (UMET), F-59000 Lille, France
    Feng CHAI, Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems (ADDS), F-59000 Lille, France
    Christel NEUT, Univ. Lille, INSERM, CHU Lille, U1286 - INFINITE - Institute for Translational Research in Inflammation, F-59000 Lille, France
    Bernard MARTEL , Univ. Lille, CNRS, INRAE, Centrale Lille, UMR 8207 – Unité Matériaux et transformations (UMET), F-59000 Lille, France
    Nicolas BLANCHEMAIN, Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems (ADDS), F-59000 Lille, France

    topicC-02 Antimicrobial
    person_pinHenry CHIJCHEAPAZA-FLORES, Univ. Lille, INSERM, CHU Lille, U1008 – Advanced Drug Delivery Systems (ADDS), F-59000 Lille, France
    P19 - Antimicrobial - Incorporation of Silver Nanostructures into Bioprintable Guanosine-based Hydrogels to Improve Stability and Implement Antibacterial PropertiesAntimicrobialMaria GODOY-GALLARDO, Bioengineering Institute of Technology, International University of Catalonia, Sant Cugat del Vallès, Spain
    Maria MERINO-GÓMEZ, Bioengineering Institute of Technology, International University of Catalonia, Sant Cugat del Vallès, Spain
    Emilio CASTRO, Bioengineering Institute of Technology, International University of Catalonia, Sant Cugat del Vallès, Spain
    F. Javier GIL, Institute of Technology, International University of Catalonia, Sant Cugat del Vallès, Spain; Department of Dentistry, International University of Catalonia, Sant Cugat del Vallès, Spain
    Roman A. PEREZ, Bioengineering Institute of Technology, International University of Catalonia, Sant Cugat del Vallès, Spain

    topicC-02 Antimicrobial
    person_pinMaria MERINO-GÓMEZ, Bioengineering Institute of Technology, International University of Catalonia, Sant Cugat del Vallès, Spain
    P20 - Antimicrobial - Internal and external metal-coatings to prevent bacterial adhesion on ureteral stentsAntimicrobialBeatriz DOMINGUES, 1I3Bs – Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Braga, Portugal 2ICVS/3B’s–PT Government Associate Laboratory, Braga/Guimarães, Portugal
    Ivo M. AROSO, 1I3Bs – Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Braga, Portugal 2ICVS/3B’s–PT Government Associate Laboratory, Braga/Guimarães, Portugal
    Estêvão LIMA, Life and Health Sciences Research Institute (ICVS), School of Health Sciences, University of Minho, Braga, Portugal
    Alexandre A. BARROS, 1I3Bs – Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Braga, Portugal 2ICVS/3B’s–PT Government Associate Laboratory, Braga/Guimarães, Portugal
    Rui L. REIS, 1I3Bs – Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Braga, Portugal 2ICVS/3B’s–PT Government Associate Laboratory, Braga/Guimarães, Portugal

    topicC-02 Antimicrobial
    person_pinRui L. REIS, 1I3Bs – Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Braga, Portugal 2ICVS/3B’s–PT Government Associate Laboratory, Braga/Guimarães, Portugal
    P21 - Antimicrobial - Hydrogel Embedding Polydopamine Nanoparticles for a Synergistic Photodynamic and Photothermal Therapy Targeting Diabetic Foot UlcersAntimicrobialSarah DEFRANÇOIS, Univ. Lille, UMET, CNRS, INRAE, Centrale Lille, UMR 8207 - UMET, F-59000 Lille, France
    Alexandre BARRAS, Univ. Lille, CNRS, Centrale Lille, Univ. Polytechnique Hauts-de-France, UMR 8520 - IEMN, F-59000 Lille, France
    Rabah BOUKHERROUB, Univ. Lille, CNRS, Centrale Lille, Univ. Polytechnique Hauts-de-France, UMR 8520 - IEMN, F-59000 Lille, France
    Mickaël MATON, Univ. Lille, INSERM, CHU Lille, U1008 - Controlled Drug Delivery Systems and Biomaterials, F-59000 Lille, France
    Nicolas BLANCHEMAIN, Univ. Lille, INSERM, CHU Lille, U1008 - Controlled Drug Delivery Systems and Biomaterials, F-59000 Lille, France
    Patrice WOISEL, Univ. Lille, UMET, CNRS, INRAE, Centrale Lille, UMR 8207 - UMET, F-59000 Lille, France
    Joël LYSKAWA, Univ. Lille, UMET, CNRS, INRAE, Centrale Lille, UMR 8207 - UMET, F-59000 Lille, France

    topicC-02 Antimicrobial
    person_pinSarah DEFRANÇOIS, Univ. Lille, UMET, CNRS, INRAE, Centrale Lille, UMR 8207 - UMET, F-59000 Lille, France
    P22 - Antimicrobial - Long acting anti-infectious titanium constructs for medical devicesAntimicrobialStefano PERNI, Cardiff University
    Hadil ALOTIBI, Cardiff University
    Lirong YANG, Cardiff University
    Abdulla YERGESHOV, Kazan University
    Trinh DANG, Kazan University
    Timur ABDULLIN, Kazan University
    Polina PROKOPOVICH, Cardiff University

    topicC-02 Antimicrobial
    person_pinPolina PROKOPOVICH, Cardiff University
    P23 - Antimicrobial - PMMA bone cement containing long releasing chlorhexidine from the nanocarriers.AntimicrobialYazan THAHER, PhD
    Polina PROKOPOVICH, Dr

    topicC-02 Antimicrobial
    person_pinPolina PROKOPOVICH, Dr
    P24 - Antimicrobial - Evaluation of crosslinked collagen laminates loaded with biomolecules for regenerative medicineAntimicrobialJoy BRAUN, Department of Orthopedics and Traumatology, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany
    Stefanie ECKES, Clemens-Schopf-Institute of Organic Chemistry and Biochemistry, TU of Darmstadt, Darmstadt, Germany
    Michelle Fiona KILB, Clemens-Schopf-Institute of Organic Chemistry and Biochemistry, TU of Darmstadt, Darmstadt, Germany
    Pol Maria ROMMENS, Department of Orthopedics and Traumatology, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany
    Philipp DREES, Department of Orthopedics and Traumatology, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany
    Katja SCHMITZ, Clemens-Schopf-Institute of Organic Chemistry and Biochemistry, TU of Darmstadt, Darmstadt, Germany
    Daniela NICKEL, Berufsakademie Sachsen—Staatliche Studienakademie, University of Cooperative Education, Glauchau, Germany
    Ulrike RITZ, Department of Orthopedics and Traumatology, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany

    topicC-02 Antimicrobial
    person_pinUlrike RITZ, Department of Orthopedics and Traumatology, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany
    P25 - Antimicrobial - Kill&Repel Coatings: the Marriage of Antifouling and Bactericidal Properties to Mitigate and Treat Wound InfectionsAntimicrobialManuela GARAY-SARMIENTO, DWI Leibniz Institute for Interactive Materials
    Mariia VOROBII, DWI Leibniz Institute for Interactive Materials
    Christian SIMONS, DWI Leibniz Institute for Interactive Materials, Chair of Biotechnology, RWTH Aachen University, Aachen, Germany
    Niklas HERRMANN, DWI Leibniz Institute for Interactive Materials, Chair of Biotechnology, RWTH Aachen University, Aachen, Germany
    Elisabeth HEINE, DWI Leibniz Institute for Interactive Materials
    Rudolf LÜTTICKEN, DWI Leibniz Institute for Interactive Materials
    Felix JAKOB, DWI Leibniz Institute for Interactive Materials, Chair of Biotechnology, RWTH Aachen University, Aachen, Germany
    Ulrich SCHWANEBERG, DWI Leibniz Institute for Interactive Materials, Chair of Biotechnology, RWTH Aachen University, Aachen, Germany
    Cesar RODRIGUEZ-EMMENEGGER, DWI Leibniz Institute for Interactive Materials, Aachen, Germany, Institute for Bioengineering of Catalonia (IBEC), and Institució Catalana de Reserca I Estudis Avançats (ICREA), Barcelona, Spain

    topicC-02 Antimicrobial
    person_pinCesar RODRIGUEZ-EMMENEGGER, DWI Leibniz Institute for Interactive Materials, Aachen, Germany, Institute for Bioengineering of Catalonia (IBEC), and Institució Catalana de Reserca I Estudis Avançats (ICREA), Barcelona, Spain
    P1 - Immunomodulatory biomaterials - Electrospun matrices loaded with classic and innovative anti-inflammatory drugs for the mitigation of foreign body reaction to tissue engineering scaffoldsImmunomodulatory biomaterialsMariella ROSALIA, Department of Drug Sciences, University of Pavia, Italy
    Adriele PRINA-MELLO, Trinity Translational Medicine Institute/Department of Clinical Medicine, Trinity College Dublin, Ireland
    Rossella DORATI, Department of Drug Sciences, University of Pavia, Italy
    Giovanna BRUNI, Consorzio per lo Sviluppo dei Sistemi a Grande Interfaccia & Department of Chemistry, University of Pavia, Italy
    Ida GENTA, Department of Drug Sciences, University of Pavia, Italy
    Bice CONTI, Department of Drug Sciences, University of Pavia, Italy

    topicC-08 Immuno-modulatory biomaterials
    person_pinMariella ROSALIA, Department of Drug Sciences, University of Pavia, Italy
    P2 - Immunomodulatory biomaterials - Functionalization of nanocellulose with host defense peptides: towards the modulation of the inflammatory response in chronic woundsImmunomodulatory biomaterialsAnna BLASI-ROMERO, Division of Nanotechnology and Functional Materials, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    Carlos PALO-NIETO, Division of Nanotechnology and Functional Materials, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    Molly ÅNGSTRÖM, Division of Nanotechnology and Functional Materials, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    Taj MUHAMMAD, Department of Pharmaceutical Biosciences, Uppsala University, Uppsala, Sweden
    Ulf GÖRANSSON, Department of Pharmaceutical Biosciences, Uppsala University, Uppsala, Sweden
    Natalia FERRAZ, Division of Nanotechnology and Functional Materials, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden

    topicC-08 Immuno-modulatory biomaterials
    person_pinAnna BLASI-ROMERO, Division of Nanotechnology and Functional Materials, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    P3 - Immunomodulatory biomaterials - Macrophage-Targeted Shikonin-Loaded Nanogels for Modulation of Inflammasome ActivationImmunomodulatory biomaterialsMatias CARDOSO, University of Aveiro
    Vitor GASPAR, University of Aveiro
    Carolina FERREIRA, University of Minho
    Ricardso SILVESTRE, University of Minho
    Iola DUARTE, University of Aveiro
    João MANO, University of Aveiro

    topicC-08 Immuno-modulatory biomaterials
    person_pinVitor GASPAR, University of Aveiro
    P4 - Immunomodulatory biomaterials - The Influence of Patient-Specific Characteristics on Macrophage-Driven In Situ Tissue Engineering Using Resorbable Synthetic ScaffoldsImmunomodulatory biomaterialsBente DE KORT, Eindhoven University of Technology, Eindhoven, The Netherlands
    Suzanne KOCH, Eindhoven University of Technology, Eindhoven, The Netherlands
    Franka VERHAEGH, Eindhoven University of Technology, Eindhoven, The Netherlands
    Simone SMINK, Eindhoven University of Technology, Eindhoven, The Netherlands
    Noud HOLSHUIJSEN, Eindhoven University of Technology, Eindhoven, The Netherlands
    Justin LEBENS, Eindhoven University of Technology, Eindhoven, The Netherlands
    Carlijn BOUTEN, Eindhoven University of Technology, Eindhoven, The Netherlands
    Anthal SMITS, Eindhoven University of Technology, Eindhoven, The Netherlands

    topicC-08 Immuno-modulatory biomaterials
    person_pinAnthal SMITS, Eindhoven University of Technology, Eindhoven, The Netherlands
    P6 - Immunomodulatory biomaterials - Influence of biomaterials surface composition and topography on the activation of neutrophils Immunomodulatory biomaterialsEzgi Irem BEKTAS, AO Research Institute Davos
    Marinus A. WESDORP, Department of Orthopaedics and Sports Medicine, Erasmus MC, University Medical Center Rotterdam, The Netherlands
    Jacek K. WYCHOWANIEC, AO Research Institute Davos
    Gregor MIKLOSIC, AO Research Institute Davos
    Matteo D`ESTE, AO Research Institute Davos

    topicC-08 Immuno-modulatory biomaterials
    person_pinEzgi Irem BEKTAS, AO Research Institute Davos
    P7 - Immunomodulatory biomaterials - Developing an In Vitro Methodology to Study the Foreign Body Response Towards Hydrogel DepotsImmunomodulatory biomaterialsChloe STEWART, University of Nottingham
    Anna PICCININI, University of Nottingham
    Mischa ZELZER, University of Nottingham
    Andrew HOOK, University of Nottingham
    Maria MARLOW, University of Nottingham

    topicC-08 Immuno-modulatory biomaterials
    person_pinChloe STEWART, University of Nottingham
    P8 - Immunomodulatory biomaterials - Physico-chemical and immunoregulatory characterization of polyelectrolytes coatings from a bacterial exopolysaccharideImmunomodulatory biomaterialsRomain BAGNOL, AO Research Institute Davos, Davos, Switzerland
    Liam O'MAHONY, Departments of Medicine and Microbiology, APC Microbiome Ireland, National University of Ireland, Cork, Ireland
    Thomas Fintan MORIARTY, AO Research Institute Davos, Davos, Switzerland
    David EGLIN, Mines Saint-Étienne, Univ Lyon, Univ Jean Monnet, INSERM, U1059 Sainbiose, Saint-Étienne F - 42023 France

    topicC-08 Immuno-modulatory biomaterials
    person_pinRomain BAGNOL, AO Research Institute Davos, Davos, Switzerland
    P9 - Immunomodulatory biomaterials - Topographical Immunomodulation: A New 3D Printing Strategy for Annulus Fibrosus (AF) Tissue Engineering Immunomodulatory biomaterialsNadine KLUSER, AO Research Institute Davos
    Sibylle GRAD, AO Research Institute Davos
    Andrea VERNENGO, AO Research Institute Davos

    topicC-08 Immuno-modulatory biomaterials
    person_pinAndrea VERNENGO, AO Research Institute Davos
    P2 - Neural tissue - Combinatorial Treatments of Porous Scaffolds and Microneurotrophins for CNS InjuriesNeural tissueKonstantina GEORGELOU, university of crete
    Erica SARIDAKI, University of Crete
    Chrysa APOSTOLIDOU, University of Crete
    Xenofon MALLIOS, University of Crete
    Kanelina KARALI, University of Crete
    Maria SAVVAKI, University of Crete
    Anna MITRAKI, University of Crete
    Achille GRAVANIS, University of Crete
    Ioannis CHARALAMPOPOULOS, University of Crete
    Dimitrios TZERANIS, University of Cyprus

    topicC-09 Neural tissue
    person_pinDimitrios TZERANIS, University of Cyprus
    P5 - Neural tissue - Homogeneous and Mixed Organic Monolayers as Coatings for Neural InterfacesNeural tissueMalgorzata SKORUPA, Silesian University of Technology
    Magdalena SKONIECZNA, Silesian University of Technology
    Katarzyna KRUKIEWICZ, Silesian University of Technology

    topicC-09 Neural tissue
    person_pinMalgorzata SKORUPA, Silesian University of Technology
    P6 - Neural tissue - 3D platforms based on rGO-doped adipose-derived extracellular matrix towards neuron differentiation Neural tissueSusana PINTO, TEMA, Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal
    Nathalie BARROCA, TEMA, Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal
    Daniela SILVA, TEMA, Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal
    Ângela SEMITELA, TEMA, Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal
    Iratxe MADARIETA, TECNALIA Basque Research and Technology Alliance (BRTA), San Sebastian, Spain
    Nerea GARCIA-URKIA, TECNALIA Basque Research and Technology Alliance (BRTA), San Sebastian, Spain
    Olatz MURUA, TECNALIA Basque Research and Technology Alliance (BRTA), San Sebastian, Spain
    Beatriz OLALDE, TECNALIA Basque Research and Technology Alliance (BRTA), San Sebastian, Spain
    Sandra VIEIRA, iBiMED Department of Medical Sciences, University of Aveiro, Aveiro, Portugal
    Paula MARQUES, TEMA, Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal
    Andrea GARCIA, TECNALIA Basque Research and Technology Alliance (BRTA), San Sebastian, Spain

    topicC-09 Neural tissue
    person_pinAndrea GARCIA, TECNALIA Basque Research and Technology Alliance (BRTA), San Sebastian, Spain
    P7 - Neural tissue - Spatial modulation of Surface with Adhesion Energy Nanogradients to Stimulate Axonal GrowthNeural tissueOcéane SÉNÉPART, Saints Pères Paris Institute for the Neurosciences (SPPIN), Université de Paris, Paris, France. Laboratoire de la Chimie de la Matière Condensée de Paris (LCMCP), Sorbonne Université, Paris, France.
    Claire LEGAY, Saints Pères Paris Institute for the Neurosciences (SPPIN), Université de Paris, Paris, France.
    Ahmed HAMRAOUI, Laboratoire de la Chimie de la Matière Condensée de Paris (LCMCP), Sorbonne Université, Paris, France.

    topicC-09 Neural tissue
    person_pinOcéane SÉNÉPART, Saints Pères Paris Institute for the Neurosciences (SPPIN), Université de Paris, Paris, France. Laboratoire de la Chimie de la Matière Condensée de Paris (LCMCP), Sorbonne Université, Paris, France.
    P8 - Neural tissue - Secretome from electrically stimulated cells: a novel potential biopharmaceutical for neural regenerative therapiesNeural tissueSahba MOBINI, Instituto de Micro y Nanotecnología, IMN- CNM, CSIC (CEI UAM+CSIC), Tres Cantos, Madrid, Spain
    Francesc GUIX, Molecular Neuropathology Unit, Centro de Biología Molecular Severo Ochoa, CSIC/UAM, Madrid, Spain
    Inés BERENGUER LÓPEZ, Molecular Neuropathology Unit, Centro de Biología Molecular Severo Ochoa, CSIC/UAM, Madrid, Spain
    Álvaro CASADOMÉ-PERALES, Molecular Neuropathology Unit, Centro de Biología Molecular Severo Ochoa, CSIC/UAM, Madrid, Spain
    Carlos G. DOTTI, Molecular Neuropathology Unit, Centro de Biología Molecular Severo Ochoa, CSIC/UAM, Madrid, Spain

    topicC-09 Neural tissue
    person_pinSahba MOBINI, Instituto de Micro y Nanotecnología, IMN- CNM, CSIC (CEI UAM+CSIC), Tres Cantos, Madrid, Spain
    P1 - Soft tissue - Sodium alginate/inulin microparticles containing Calendula officinalis flower extract for dermatologic applicationsSoft tissueJustyna KOZLOWSKA, Nicolaus Copernicus University in Torun
    Weronika PRUS-WALENDZIAK, Nicolaus Copernicus University in Torun
    Natalia STACHOWIAK, Nicolaus Copernicus University in Torun
    Joanna SKOPINSKA-WISNIEWSKA, Nicolaus Copernicus University in Torun
    Beata KACZMAREK-SZCZEPANSKA, Nicolaus Copernicus University in Torun

    topicC-11 Skin/soft tissue
    person_pinJustyna KOZLOWSKA, Nicolaus Copernicus University in Torun
    P2 - Soft tissue - From surgery to the lab: illustration of a transcriptomic and tissue analyses workflow developed on periprosthetic tissuesSoft tissueIsabelle BRIGAUD, CNRS IS2M
    Tatiana PETITHORY, CNRS IS2M
    Laurent PIEUCHOT, CNRS IS2M
    Karine ANSELME, CNRS IS2M

    topicC-11 Skin/soft tissue
    person_pinIsabelle BRIGAUD, CNRS IS2M
    P3 - Soft tissue - Towards scarless healing with the use of hybrid collagen-based dermal substitutes: a study on their contraction, physical and biological properties over timeSoft tissueChristopher Y. LEON-VALDIVIESO, Polymers for Health and Biomaterials - IBMM - Univ Montpellier
    Audrey BETHRY, Polymers for Health and Biomaterials - IBMM - Univ Montpellier
    Coline PINESE, Polymers for Health and Biomaterials - IBMM - Univ Montpellier
    Jean-Marc PERNOT, URGO Recherche Innovation et Développement, Chenôve, France
    Michèle DAI, URGO Recherche Innovation et Développement, Chenôve, France
    Xavier GARRIC, Polymers for Health and Biomaterials - IBMM - Univ Montpellier

    topicC-11 Skin/soft tissue
    person_pinChristopher Y. LEON-VALDIVIESO, Polymers for Health and Biomaterials - IBMM - Univ Montpellier
    P1 - Biocompatibility - Standardized quantification of cell biological reactions directly on biomaterialsBiocompatibility Constantin ISSLEIB, 1Fraunhofer Institute for Ceramic Technologies and Systems, Dresden, Germany 2Fraunhofer Institute for Cell Therapy and Immunology, Leipzig, Germany
    Susanne KURZ, 1Fraunhofer Institute for Ceramic Technologies and Systems, Dresden, Germany 2Fraunhofer Institute for Cell Therapy and Immunology, Leipzig, Germany
    Juliane SPOHN, 1Fraunhofer Institute for Ceramic Technologies and Systems, Dresden, Germany 2Fraunhofer Institute for Cell Therapy and Immunology, Leipzig, Germany

    topicE-04 Biocompatibility (in vitro, in vivo testing)
    person_pinJuliane SPOHN, 1Fraunhofer Institute for Ceramic Technologies and Systems, Dresden, Germany 2Fraunhofer Institute for Cell Therapy and Immunology, Leipzig, Germany
    P2 - Biocompatibility - Bioresorbable materials have different effects of pre-osteoblast cell viability and migrationBiocompatibility Saara V. SIRKIÄ, Department of Biomaterials Science and Turku Clinical Biomaterials Centre - TCBC, Institute of Dentistry, University of Turku, Lemminkäisenkatu 2, 20520 Turku, Finland
    Karoliina KAJANDER, Institute of Biomedicine, Faculty of Medicine, University of Turku Kiinamyllynkatu 10, 20520 Turku, Finland
    Terhi J. HEINO, Institute of Biomedicine, Faculty of Medicine, University of Turku Kiinamyllynkatu 10, 20520 Turku, Finland
    Jorma MÄÄTTÄ, Institute of Biomedicine, Faculty of Medicine, University of Turku Kiinamyllynkatu 10, 20520 Turku, Finland
    Pekka K. VALLITTU, Department of Biomaterials Science and Turku Clinical Biomaterials Centre - TCBC, Institute of Dentistry, University of Turku, Lemminkäisenkatu 2, 20520 Turku, Finland; City of Turku, Welfare Division, Turku, Finland

    topicE-04 Biocompatibility (in vitro, in vivo testing)
    person_pinSaara V. SIRKIÄ, Department of Biomaterials Science and Turku Clinical Biomaterials Centre - TCBC, Institute of Dentistry, University of Turku, Lemminkäisenkatu 2, 20520 Turku, Finland
    P3 - Biocompatibility - In vitro biocompatibility study of MIN6 spheroids with a tetrahydropyran triazole phenyl-alginate and quaternized phosphocholine-chitosan nanocoatingBiocompatibility Michael YITAYEW, McGill University, Department of Biomedical Engineering
    Maryam TABRIZIAN, McGill University, Department of Biomedical Engineering and Faculty of Dentistry

    topicE-04 Biocompatibility (in vitro, in vivo testing)
    person_pinMichael YITAYEW, McGill University, Department of Biomedical Engineering
    P4 - Biocompatibility - Development and physiochemical characterization of polymeric biomaterial scaffold for bone tissue engineering applications- an in-vivo study Biocompatibility Sesha Subramanian MURUGAN , Biomaterials Research Laboratory, Yenepoya Research Center, Yenepoya (Deemed to be University), Deralakatte, Mangalore, Karnataka 575018, India

    topicE-04 Biocompatibility (in vitro, in vivo testing)
    person_pinSesha Subramanian MURUGAN , Biomaterials Research Laboratory, Yenepoya Research Center, Yenepoya (Deemed to be University), Deralakatte, Mangalore, Karnataka 575018, India
    P5 - Biocompatibility - Natural Bioactive Compounds from Plant Biomass in Medical and Pharmaceutical ApplicationBiocompatibility Anna BAJEK, Tissue Engineering Department Chair of Urology and Andrology, The Ludwik Rydygier Collegium Medicum in Bydgoszcz, Nicolaus Copernicus University in Torun, Karlowicza str 24 85-092 Bydgoszcz, Poland
    Ma?gorzata MAJ, Tissue Engineering Department Chair of Urology and Andrology, The Ludwik Rydygier Collegium Medicum in Bydgoszcz, Nicolaus Copernicus University in Torun, Karlowicza str 24 85-092 Bydgoszcz, Poland
    ?ukasz KA?MIERSKI, Tissue Engineering Department Chair of Urology and Andrology, The Ludwik Rydygier Collegium Medicum in Bydgoszcz, Nicolaus Copernicus University in Torun, Karlowicza str 24 85-092 Bydgoszcz, Poland
    Piotr KONOPKA, Faculty of Chemistry, Adam Mickiewicz University, Uniwersytetu Poznanskiego 8, 61-614 Pozna?, Poland
    Marta GIAMBERINI, Department of Chemical Engineering, University Rovira i Virgili, Av. Països Catalans 26, Campus Sescelades, 43007 Tarragona, Spain
    Bartosz TYLKOWSKI, Eurecat, Centre Tecnològic de Catalunya, Marcel·lí Domingo s/n, 43007 Tarragona, Spain
    Renata JASTRZ?B, Faculty of Chemistry, Adam Mickiewicz University, Uniwersytetu Poznanskiego 8, 61-614 Pozna?, Poland

    topicE-04 Biocompatibility (in vitro, in vivo testing)
    person_pinAnna BAJEK, Tissue Engineering Department Chair of Urology and Andrology, The Ludwik Rydygier Collegium Medicum in Bydgoszcz, Nicolaus Copernicus University in Torun, Karlowicza str 24 85-092 Bydgoszcz, Poland
    P7 - Biocompatibility - Hemocompatible photopolymers dedicated for the new design of the Single Piece Blood RotorBiocompatibility Roman MAJOR, Institute of Metallurgy and Materials Science, Polish Academy of Sciences, Reymonta Str. 25,30-059 Cracow, Poland
    Maciej GAWLIKOWSKI, Department of Biosensors and Processing of Biomedical Signals, Faculty of Biomedical Engineering, Silesian University of Technology, Roosevelt Str. 40, 41-800 Zabrze, Poland;
    Christoph HOFSTETTER , Institute of Metallurgy and Materials Science, Polish Academy of Sciences, Reymonta Str. 25,30-059 Cracow, Poland
    Juergen M. LACKNER, Joanneum Research Forschungsges.m.b.H., Institute of Surface Technologies and Photonics, Functional Surfaces, Leobner Str. 94, Niklasdorf 8712, Austria

    topicE-04 Biocompatibility (in vitro, in vivo testing)
    person_pinRoman MAJOR, Institute of Metallurgy and Materials Science, Polish Academy of Sciences, Reymonta Str. 25,30-059 Cracow, Poland
    P9 - Biocompatibility - Material characterization with reference to biocompatibility and microbiology dedicated for anti-microbial finger implantBiocompatibility Adam BYRSKI, Institute of Metallurgy and Materials Science, Polish Academy of Sciences, Reymonta St. 25, 30-059 Cracow, Poland
    Roman MAJOR, Institute of Metallurgy and Materials Science, Polish Academy of Sciences, Reymonta St. 25, 30-059 Cracow, Poland
    Marcin DYNER, Faculty of Science and Technology, Jan Dlugosz University in Czestochowa, Armii Krajowej Av, 13/15, 42-200 Czestochowa, Poland
    Katarzyna KASPERKIEWICZ, University of Silesia in Katowice, Faculty of Natural Sciences, Institute of Biology, Biotechnology and Environmental Protection, Jagiello?ska St. 28, 40-032 Katowice, Poland
    Lukasz MAJOR, Institute of Metallurgy and Materials Science, Polish Academy of Sciences, Reymonta St. 25, 30-059 Cracow, Poland
    Juergen M. LACKNER, JOANNEUM RESEARCH Forschungsges.m.b.H., Institute of Surface Technologies and Photonics, Functional Surfaces, Leobner Strasse 94, 8712 Niklasdorf, Austria

    topicE-04 Biocompatibility (in vitro, in vivo testing)
    person_pinRoman MAJOR, Institute of Metallurgy and Materials Science, Polish Academy of Sciences, Reymonta St. 25, 30-059 Cracow, Poland
    P10 - Biocompatibility - In Vitro Diabetic Bone Models in Research on BiomaterialsBiocompatibility Anna ZGADZAJ, Department of Environmental Health Sciences, Medical University of Warsaw, Warsaw, Poland
    Barbara KOLODZIEJSKA, Department of Analytical Chemistry and Biomaterials, Medical University of Warsaw, Warsaw, Poland
    Karina OWCZAREK, Department of Environmental Health Sciences, Medical University of Warsaw, Warsaw, Poland
    Aleksandra KORGUL, Department of Environmental Health Sciences, Medical University of Warsaw, Warsaw, Poland
    Joanna KOLMAS, Department of Analytical Chemistry and Biomaterials, Medical University of Warsaw, Warsaw, Poland

    topicE-04 Biocompatibility (in vitro, in vivo testing)
    person_pinAnna ZGADZAJ, Department of Environmental Health Sciences, Medical University of Warsaw, Warsaw, Poland
    P11 - Biocompatibility - Analysis of white blood cells in rats following implantation of HHP treated xenogenic cartilage tissueBiocompatibility Christopher POHL, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    Charlotte KOPPE, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    Nico BRANDT, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    Andreas HOENE, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    Daniel BEHRENDT, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    Friederike POOSCH, Department of Oto-Rhino-Laryngology, Head and Neck Surgery, Rostock University Medical
    Daniel STRÜDER, Department of Oto-Rhino-Laryngology, Head and Neck Surgery, Rostock University Medical
    Jens VAN DEN BRANDT, Central service and research facility for laboratory animals
    Sabine BERG, Central service and research facility for laboratory animals
    Michael SCHLOSSER, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald

    topicE-04 Biocompatibility (in vitro, in vivo testing)
    person_pinChristopher POHL, Department of General Surgery, Visceral, Thoracic and Vascular Surgery, University Medical Center Greifswald
    P1 - Biodegradation - Long-term degradation behaviour of polymer materials based on PCL, PLGA, enriched with polyphenolic compounds and bioactive glass BiodegradationMichal DZIADEK, Jagiellonian University, Faculty of Chemistry, 2 Gronostajowa St., 30-387 Krakow, Poland
    Kinga DZIADEK, University of Agriculture in Krakow, Faculty of Food Technology, Department of Human Nutrition and Dietetics, 122 Balicka St., 30-149 Krakow, Poland
    Kamila CHECINSKA, AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Glass Technology and Amorphous Coatings, 30 Mickiewicza Ave., 30-059 Krakow, Poland
    Emilia CHOINSKA, Warsaw University of Technology, Faculty of Materials Science and Engineering, 141 Woloska St., 02-507 Warsaw, Poland
    Piotr SZATKOWSKI, AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Biomaterials and Composites, 30 Mickiewicza Ave., 30-059 Krakow, Poland
    Aleksandra WAJDA, Jagiellonian University, Faculty of Chemistry, 2 Gronostajowa St., 30-387 Krakow, Poland
    Szymon SALAGIERSKI, AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Glass Technology and Amorphous Coatings, 30 Mickiewicza Ave., 30-059 Krakow, Poland
    Aneta KOPEC, University of Agriculture in Krakow, Faculty of Food Technology, Department of Human Nutrition and Dietetics, 122 Balicka St., 30-149 Krakow, Poland
    Katarzyna CHOLEWA-KOWALSKA, AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Glass Technology and Amorphous Coatings, 30 Mickiewicza Ave., 30-059 Krakow, Poland

    topicE-05 Biodegradation
    person_pinKatarzyna CHOLEWA-KOWALSKA, AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Glass Technology and Amorphous Coatings, 30 Mickiewicza Ave., 30-059 Krakow, Poland
    P2 - Biodegradation - Development of a biodegradable Mg-doped ZnO/PPy neural interface BiodegradationMagesh SANKAR, CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland Galway, Galway, Ireland
    Manus BIGGS, CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland Galway, Galway, Ireland
    Amir ABDO, CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland Galway, Galway, Ireland

    topicE-05 Biodegradation
    person_pinAmir ABDO, CÚRAM, SFI Research Centre for Medical Devices, National University of Ireland Galway, Galway, Ireland
    P3 - Biodegradation - In vitro and in vivo degradation and biocompatibility follow-up of mechanically reinforced degradable pHEMABiodegradationDuarte Alexandre CAMPOS SERRA MOURA, 1.INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Rua Alfredo Allen, 208, 4200-180 Porto, Portugal; 2.i3S - Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Rua Alfredo Allen, 208, 4200-180 Porto, Portugal; 3.FEUP – Faculdade de Engenharia, Departamento de Engenharia Metalúrgica e de Materiais, Universidade do Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
    Helena P. FERREIRA, 1.INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Rua Alfredo Allen, 208, 4200-180 Porto, Portugal; 2.i3S - Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Rua Alfredo Allen, 208, 4200-180 Porto, Portugal; 4. ICBAS – Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, Porto, 4050-313, Portugal
    Sabrina ROHRINGER, 5. Center for Biomedical Research, Medical University of Vienna, Vienna, Austria
    Andreia T. PEREIRA, 1.INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Rua Alfredo Allen, 208, 4200-180 Porto, Portugal; 2.i3S - Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Rua Alfredo Allen, 208, 4200-180 Porto, Portugal;
    Cristina C. BARRIAS, 1.INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Rua Alfredo Allen, 208, 4200-180 Porto, Portugal; 2.i3S - Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Rua Alfredo Allen, 208, 4200-180 Porto, Portugal; 4. ICBAS – Instituto de Ciências Biomédicas Abel Salazar, Universidade do Porto, Porto, 4050-313, Portugal
    Fernão D. MAGALHÃES, 6. LEPABE – Faculdade de Engenharia, Universidade do Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
    Helga BERGMEISTER, 5. Center for Biomedical Research, Medical University of Vienna, Vienna, Austria; 7Ludwig Boltzmann Institute for Cardiovascular Research, Austria;
    Inês C. GONÇALVES, 1. INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Rua Alfredo Allen, 208, 4200-180 Porto, Portugal; 2. i3S - Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Rua Alfredo Allen, 208, 4200-180 Porto, Portugal;

    topicE-05 Biodegradation
    person_pinInês C. GONÇALVES, 1. INEB – Instituto de Engenharia Biomédica, Universidade do Porto, Rua Alfredo Allen, 208, 4200-180 Porto, Portugal; 2. i3S - Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Rua Alfredo Allen, 208, 4200-180 Porto, Portugal;
    P4 - Biodegradation - Macromer-based Macroporous Scaffolds with Tunable Degradation Kinetics Controlled by Macromer ChemistryBiodegradationJan KRIEGHOFF, Institute of Pharmacy, Pharmaceutical Technology, Faculty of Medicine, Leipzig University, Germany
    Christian KASCHOLKE, Institute of Pharmacy, Pharmaceutical Technology, Faculty of Medicine, Leipzig University, Germany
    Annett STARKE, Institute of Pharmacy, Pharmaceutical Technology, Faculty of Medicine, Leipzig University, Germany
    Rudi LOTH, Institute of Pharmacy, Pharmaceutical Technology, Faculty of Medicine, Leipzig University, Germany
    Michaela SCHULZ-SIEGMUND, Institute of Pharmacy, Pharmaceutical Technology, Faculty of Medicine, Leipzig University, Germany
    Michael C. HACKER, Institute of Pharmaceutics and Biopharmaceutics, Heinrich Heine University, Düsseldorf, Germany

    topicE-05 Biodegradation
    person_pinJan KRIEGHOFF, Institute of Pharmacy, Pharmaceutical Technology, Faculty of Medicine, Leipzig University, Germany
    P5 - Biodegradation - Degradation and Stability Observations of Bioactivated Gellan Gum Hydrogels in vitro and in vivoBiodegradationChristine GERING, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    Jenny PÁRRAGA, IamFluidics BV, High Tech Factory, Enschede, The Netherlands
    Hanna VUORENPÄÄ, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    Lucía BOTERO, Facultad de Medicina Veterinaria y de Zootecnia, Universidad Nacional de Colombia, Colombia
    Susanna MIETTINEN, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    Minna KELLOMÄKI, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland

    topicE-05 Biodegradation
    person_pinChristine GERING, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
    P7 - Biodegradation - Reseeding Mature Multinucleated Cells on Biomaterials for Resorption Analysis - Osteoclast Transfer CultureBiodegradationChristiane HEINEMANN, Max Bergmann Center of Biomaterials, Institute of Materials Science, Technische Universität Dresden, Dresden, Germany
    Benjamin KRUPPKE, Max Bergmann Center of Biomaterials, Institute of Materials Science, Technische Universität Dresden, Dresden, Germany

    topicE-05 Biodegradation
    person_pinBenjamin KRUPPKE, Max Bergmann Center of Biomaterials, Institute of Materials Science, Technische Universität Dresden, Dresden, Germany
    P1 - (Pre)-clinical evaluation of medical devices - A composite elastin derivative-based hydrogel designed for promoting innervation, vascularization and bone formation: In vivo evaluation in ectopic and heterotopic models(Pre)-clinical evaluation of medical devicesMicaela ROQUE, BioIngenierie Tissulaire (BioTis), Inserm U1026, University of Bordeaux, Bordeaux, France; SATT Aquitaine, Aquitaine Science Transfert, Talence, France
    Nadia MAHMOUDI, BioIngenierie Tissulaire (BioTis), Inserm U1026, University of Bordeaux, Bordeaux, France; Univ. Bordeaux, CNRS, Bordeaux INP, LCPO, UMR 5629, Pessac, France
    Bruno SANTOS, BioIngenierie Tissulaire (BioTis), Inserm U1026, University of Bordeaux, Bordeaux, France
    Sylvain CATROS, BioIngenierie Tissulaire (BioTis), Inserm U1026, University of Bordeaux, Bordeaux, France
    Sébastien LECOMMANDOUX, Univ. Bordeaux, CNRS, Bordeaux INP, LCPO, UMR 5629, Pessac, France
    Bertrand GARBAY, Univ. Bordeaux, CNRS, Bordeaux INP, LCPO, UMR 5629, Pessac, France
    Joëlle AMÉDÉE, BioIngenierie Tissulaire (BioTis), Inserm U1026, University of Bordeaux, Bordeaux, France

    topicI-1 Pre-clinical evaluation of medical devices
    person_pinMicaela ROQUE, BioIngenierie Tissulaire (BioTis), Inserm U1026, University of Bordeaux, Bordeaux, France; SATT Aquitaine, Aquitaine Science Transfert, Talence, France
    P2 - (Pre)-clinical evaluation of medical devices - A cross-sectional clinical study on a glycated hemoglobin (HbA1C) point-of-care device for the screening of prediabetes and diabetes in dental setting(Pre)-clinical evaluation of medical devicesElena Maria VARONI, University of Milan
    Lucrezia CINQUANTA, University of Milan
    Rita Clara PARONI, University of Milan
    Pietro CERVERI, Politecnico di Milano
    Francesco CELLESI, Politecnico di Milano
    Antonio CARRASSI, University of Milan

    topicI-2 Clinical evaluation of medical devices
    person_pinElena Maria VARONI, University of Milan
    P3 - (Pre)-clinical evaluation of medical devices - Regional Effect of IRE-Ablation after Monophasic Square Pulse Stimuli on Porcine Liver(Pre)-clinical evaluation of medical devicesSung-Min JEON, Department of Biomedical Science, Translational Research center, Inha University Hospital, Inha University College of Medicine, Incheon 22332, South Korea.
    Yixin JIANG , Department of Biomedical Science, BK21 FOUR Program in Biomedical Science and Engineering, Inha University College of Medicine, Incheon 22212, South Korea
    Enkhzaya DAVAA, Department of Biomedical Science, Translational Research center, Inha University Hospital, Inha University College of Medicine, Incheon 22332, South Korea.
    Ho Sun JUNG, Department of Biomedical Science, BK21 FOUR Program in Biomedical Science and Engineering, Inha University College of Medicine, Incheon 22212, South Korea
    Seok JEONG, Department of Internal Medicine, Inha University Hospital, Inha University College of Medicine, Incheon, Korea.
    Su-Geun YANG, 1Department of Biomedical Science, Translational Research center, Inha University Hospital, Inha University College of Medicine, Incheon 22332, South Korea. 2Department of Biomedical Science, BK21 FOUR Program in Biomedical Science and Engineering, Inha University College of Medicine, Incheon 22212, South Korea

    topicI-1 Pre-clinical evaluation of medical devices
    person_pinSu-Geun YANG, 1Department of Biomedical Science, Translational Research center, Inha University Hospital, Inha University College of Medicine, Incheon 22332, South Korea. 2Department of Biomedical Science, BK21 FOUR Program in Biomedical Science and Engineering, Inha University College of Medicine, Incheon 22212, South Korea
    P4 - (Pre)-clinical evaluation of medical devices - Wnt signalling pathway facilitates nanovibration-stimulated osteogenesis in mesenchymal stem cells(Pre)-clinical evaluation of medical devicesHussain JAFFERY, University of Glasgow

    topicI-1 Pre-clinical evaluation of medical devices
    person_pinHussain JAFFERY, University of Glasgow
    P5 - (Pre)-clinical evaluation of medical devices - Long term oxidation behavior of PEO-surface modified magnesium screws in a large animal model(Pre)-clinical evaluation of medical devicesAna PRATES SOARES, Department of Oral and Maxillofacial Surgery, Charité – Universitätsmedizin, Berlin, Germany
    Alexander KOPP, Meotec GmbH, Aachen, Germany
    Heilwig FISCHER, Department of Oral and Maxillofacial Surgery, Charité – Universitätsmedizin, Berlin, Germany
    Katharina SCHMIDT-BLEEK, Julius Wolff Institute and Center for Musculoskeletal Surgery, Charité – Universitätsmedizin, Berlin, Germany
    Christoph LEBER, Department of Oral and Maxillofacial Surgery, Charité – Universitätsmedizin, Berlin, Germany
    Henri KREIKER, Department of Oral and Maxillofacial Surgery, Charité – Universitätsmedizin, Berlin, Germany
    Georg DUDA, Julius Wolff Institute and Center for Musculoskeletal Surgery, Charité – Universitätsmedizin, Berlin, Germany
    Henning HANKEN, Department of Oral and Maxillofacial Surgery, Semmelweis University Hamburg, Hamburg, Germany
    Ole JUNG, Clinic and Policlinic for Dermatology and Venereology, University Medical Center Rostock, Rostock, Germany
    Ralf SMEETS, Department of Oral and Maxillofacial Surgery, University Medical Center Hamburg-Eppendorf, Hamburg, Germany
    Max HEILAND, Department of Oral and Maxillofacial Surgery, Charité – Universitätsmedizin, Berlin, Germany
    Carsten RENDENBACH, Department of Oral and Maxillofacial Surgery, Charité – Universitätsmedizin, Berlin, Germany

    topicI-1 Pre-clinical evaluation of medical devices
    person_pinAna PRATES SOARES, Department of Oral and Maxillofacial Surgery, Charité – Universitätsmedizin, Berlin, Germany
    P6 - (Pre)-clinical evaluation of medical devices - Alveolar bone defect in rat’s maxillary: a new model to study bone regeneration approaches in oral surgery(Pre)-clinical evaluation of medical devicesNaïma AHMED OMAR, BIOTIS U1026, Université de Bordeaux, Bordeaux, France
    Olivier CHASSANDE , BIOTIS U1026, Université de Bordeaux, Bordeaux, France
    Laurent BIDAULT, Siltiss, SA, Zac de la Nau, Saint-Viance, France
    Sylvain CATROS, BIOTIS U1026, Université de Bordeaux, Bordeaux, France; Service de Chirurgie Orale, CHU de Bordeaux, Bordeaux, France
    Joëlle AMÉDÉE, BIOTIS U1026, Université de Bordeaux, Bordeaux, France
    Didier LETOURNEUR, Siltiss, SA, Zac de la Nau, Saint-Viance, France; LVTS U1148, Université Sorbonne Paris Nord, Hôpital X Bichat, Université de Paris, Paris, France
    Jean-Christophe FRICAIN, BIOTIS U1026, Université de Bordeaux, Bordeaux, France; Service de Chirurgie Orale, CHU de Bordeaux, Bordeaux, France
    Mathilde FÉNELON, BIOTIS U1026, Université de Bordeaux, Bordeaux, France; Service de Chirurgie Orale, CHU de Bordeaux, Bordeaux, France

    topicI-1 Pre-clinical evaluation of medical devices
    person_pinNaïma AHMED OMAR, BIOTIS U1026, Université de Bordeaux, Bordeaux, France
    P7 - (Pre)-clinical evaluation of medical devices - Recent advances of pullulan and/or dextran-based materials for bone tissue engineering strategies in preclinical studies: a systematic review(Pre)-clinical evaluation of medical devicesNaïma AHMED OMAR, BIOTIS U1026, Université de Bordeaux, Bordeaux, France
    Robin SIADOUS, BIOTIS U1026, Université de Bordeaux, Bordeaux, France
    Joëlle AMÉDÉE, BIOTIS U1026, Université de Bordeaux, Bordeaux, France
    Laurent BIDAULT, Siltiss, SA, Zac de la Nau, Saint-Viance, France
    Didier LETOURNEUR, Siltiss, SA, Zac de la Nau, Saint-Viance, France; LVTS U1148, Université Sorbonne Paris Nord, Hôpital X Bichat, Université de Paris, Paris, France
    Jean-Christophe FRICAIN, BIOTIS U1026, Université de Bordeaux, Bordeaux, France; Service de Chirurgie Orale, CHU de Bordeaux, Bordeaux, France
    Mathilde FÉNELON, BIOTIS U1026, Université de Bordeaux, Bordeaux, France; Service de Chirurgie Orale, CHU de Bordeaux, Bordeaux, France

    topicI-1 Pre-clinical evaluation of medical devices
    person_pinNaïma AHMED OMAR, BIOTIS U1026, Université de Bordeaux, Bordeaux, France
    P1- Carbon - Modulation of ECM-derived hydrogels rheological properties by using graphene oxideCarbon Andreia PEREIRA, INEB/i3S - Instituto de Engenharia Biomédica, Portugal;
    Ines FERNANDES, INEB/i3S - Instituto de Engenharia Biomédica, Portugal;
    Sabrina ROHRINGER, Center for Biomedical Research Medical University of Vienna, Austria
    Herbert KISS, Department of Obstetrics and Gynecology, Division of Obstetrics and Feto-Maternal Medicine, Medical University of Vienna, 1090 Vienna, Austria
    Cristina BARRIAS, INEB/i3S - Instituto de Engenharia Biomédica, Portugal
    Fernão MAGALHÃES, LEPABE - Laboratório de Engenharia de Processos, Ambiente, Biotecnologia e Energia, Faculdade de Engenharia, Universidade Do Porto
    Helga BERGMEISTER, Center for Biomedical Research Medical University of Vienna, Austria;
    Schneider KARL, Center for Biomedical Research Medical University of Vienna, Austria;
    Inês GONÇALVES, INEB/i3S - Instituto de Engenharia Biomédica, Portugal;

    topicA-04 Carbon
    person_pinInês GONÇALVES, INEB/i3S - Instituto de Engenharia Biomédica, Portugal;
    P1 - Metals - Titanium nitride thin layer obtained by Atomic Layer Deposition – Potential application for orthopedic implants MetalsMarcin BASIAGA, Silesian University of Technology
    Janusz SZEWCZENKO, Silesian University of Technology
    Witold WALKE, Silesian University of Technology
    Zbigniew PASZENDA, Silesian University of Technology

    topicA-08 Metals
    person_pinMarcin BASIAGA, Silesian University of Technology
    P3 - Metals - Manufacturing of bio-degradable metallic orthopedic implants by powder metallurgy MetalsJulien MOREAU, MATEIS (UMR 5510)
    Laurent GREMILLARD, MATEIS (UMR 5510)
    Benoit TER-OVANESSIAN, MATEIS (UMR 5510)
    Michel PEREZ, MATEIS (UMR 5510)
    Olivier DEZELLUS, LMI (UMR 5615)
    Xavier BOULNAT, MATEIS (UMR 5510)

    topicA-08 Metals
    person_pinJulien MOREAU, MATEIS (UMR 5510)
    P5 - Metals - New chapter of Ti13Nb13Zr as biomaterial with using in skeletal system MetalsJulia LISON, Silesian University of Technology
    Magdalena ANTONOWICZ, Silesian University of Technology
    Zbigniew PASZENDA, Silesian University of Technology
    Witold WALKE, Silesian University of Technology
    Marcin BASIAGA, Silesian University of Technology

    topicA-08 Metals
    person_pinWitold WALKE, Silesian University of Technology
    P6 - Metals - Biodegradation behavior of a newly designed Mg alloy with highly enhanced corrosion resistance MetalsDu-Won MIN, Ulsan National Institute of Science and Technology
    Soo-Min BAEK, Ulsan National Institute of Science and Technology
    Jeong-Ki KIM, Ulsan National Institute of Science and Technology
    Jung Gu LEE, University of Ulsan
    Sung Soo PARK, Ulsan National Institute of Science and Technology

    topicA-08 Metals
    person_pinSung Soo PARK, Ulsan National Institute of Science and Technology
    P7 - Metals - Understanding the corrosion of Mg alloys in urinary tract environment: towards the development of a biodegradable metallic ureteral stent MetalsMargarida PACHECO, i3Bs Research Group on Biomaterials Biodegradables and Biomimetics
    Ivo M. AROSO, i3Bs Research Group on Biomaterials Biodegradables and Biomimetics
    Sviatlana V. LAMAKA, Institute of Surface Science, Helmholtz-Zentrum hereon GmbH, Germany
    Di MEI, Institute of Surface Science, Helmholtz-Zentrum hereon GmbH, Germany
    Mikhail ZHELUDKEVICH, Institute of Surface Science, Helmholtz-Zentrum hereon GmbH, Germany
    Jan BOHLEN, Institute for Material and Process Design, Helmholtz-Zentrum hereon GmbH, Germany
    Maria NIENABER, Institute for Material and Process Design, Helmholtz-Zentrum hereon GmbH, Germany
    Dietmar LETZIG, Institute for Material and Process Design, Helmholtz-Zentrum hereon GmbH, Germany
    Estêvão LIMA, School of Health Sciences, Life and Health Sciences Research Institute (ICVS), University of Minho, Braga, Portugal
    Alexandre A. BARROS, i3Bs Research Group on Biomaterials Biodegradables and Biomimetics
    Rui L. REIS, i3Bs Research Group on Biomaterials Biodegradables and Biomimetics

    topicA-08 Metals
    person_pinRui L. REIS, i3Bs Research Group on Biomaterials Biodegradables and Biomimetics
    P2 - Porous materials - 3D-printed porous cochlear implantsPorous materialsAikaterini ISAAKIDOU, TU Delft
    Iulian APACHITEI, TU Delft
    E.L. (Lidy) FRATILA-APACHITEI, TU Delft
    A.A. ZADPOOR, TU Delft

    topicA-10 Porous materials
    person_pinAikaterini ISAAKIDOU, TU Delft
    P3 - Porous materials - 3D-printed aerogel scaffolds for personalized bone tissue engineeringPorous materialsANA IGLESIAS-MEJUTO, USC
    CARLOS ALBERTO GARCÍA-GONZÁLEZ, USC

    topicA-10 Porous materials
    person_pinANA IGLESIAS-MEJUTO, USC
    P5 - Porous materials - Bioprocessing of silk fibroin into anisotropic scaffolds for building up muscle tissuePorous materialsSabine KEUTMANN, Department of Biohybrid & Medical Textiles (BioTex) AME-Institute of Applied Medical Engineering Helmholtz Institute, RWTH Aachen University
    Stephan RÜTTEN, Electron Microscopy Facility Uniklinik RWTH Aachen
    Marius KÖPF, Fibrothelium GmbH
    Astrid OBRECHT, Klinik für Plastische Chirugie, Hand- und Verbrennungschiruguie, Uniklinik RWTH Aachen
    Benedikt SCHÄFER, Klinik für Plastische Chirugie, Hand- und Verbrennungschiruguie, Uniklinik RWTH Aachen
    Justus P. BEIER, Klinik für Plastische Chirugie, Hand- und Verbrennungschiruguie, Uniklinik RWTH Aachen
    Stefan JOCKENHOEVEL, Department of Biohybrid & Medical Textiles (BioTex) AME-Institute of Applied Medical Engineering Helmholtz Institute, RWTH Aachen University; Aachen-Maastricht-Institute for Biobased Materials (AMIBM) Maastricht University
    Alicia FERNÁNDEZ-COLINO, Department of Biohybrid & Medical Textiles (BioTex) AME-Institute of Applied Medical Engineering Helmholtz Institute, RWTH Aachen University

    topicA-10 Porous materials
    person_pinSabine KEUTMANN, Department of Biohybrid & Medical Textiles (BioTex) AME-Institute of Applied Medical Engineering Helmholtz Institute, RWTH Aachen University
    P6 - Porous materials - Development of Gelatin-based Scaffolds for Bone Tissue EngineeringPorous materialsAlessandra SORIENTE, Institute of Polymers, Composites and Biomaterials, National Research Council, Naples, Italy
    Alfredo RONCA, Institute of Polymers, Composites and Biomaterials, National Research Council, Naples, Italy
    Maria Grazia RAUCCI, Institute of Polymers, Composites and Biomaterials, National Research Council, Naples, Italy
    Ugo D'AMORA, Institute of Polymers, Composites and Biomaterials, National Research Council, Naples, Italy
    Ines FASOLINO, Institute of Polymers, Composites and Biomaterials, National Research Council, Naples, Italy
    Christian DEMITRI, Department of Engineering for Innovation, University of Salento, Lecce, Italy
    Luigi AMBROSIO, Institute of Polymers, Composites and Biomaterials, National Research Council, Naples, Italy

    topicA-10 Porous materials
    person_pinAlessandra SORIENTE, Institute of Polymers, Composites and Biomaterials, National Research Council, Naples, Italy
    P7 - Porous materials - Biocompatibility of PHB/CHIT Scaffold as a Promising Biopolymer in Treatment of Osteochondral DefectsPorous materialsEva PETROVOVA, Department of Morphological Disciplines, University of Veterinary Medicine and Pharmacy in Kosice, Slovakia
    Zuzana DEMCISAKOVA, Department of Morphological Disciplines, University of Veterinary Medicine and Pharmacy in Kosice, Slovakia
    Zuzana TIRPAKOVA, Department of Biology and Physiology, University of Veterinary Medicine and Pharmacy in Kosice, Slovakia
    Katarina HOLOVSKA, Department of Morphological Disciplines, University of Veterinary Medicine and Pharmacy in Kosice, Slovakia
    Lenka LUPTAKOVA, Department of Biology and Physiology, University of Veterinary Medicine and Pharmacy in Kosice, Slovakia

    topicA-10 Porous materials
    person_pinEva PETROVOVA, Department of Morphological Disciplines, University of Veterinary Medicine and Pharmacy in Kosice, Slovakia
    P2 - Adhesives and anti-adhesives - Degradable bioadhesives based on PEG-PLA star-shaped hydrogels for soft tissue applicationsAdhesives and anti-adhesivesMathilde GROSJEAN, Polymers for Health and Biomaterials - IBMM - Univ Montpellier
    Edouard GIRARD, TIMC-IMAG - Département de chirurgie digestive et de l'urgence - LADAF, CHU Grenoble Alpes, Université Grenoble Alpes
    Grégory CHAGNON, TIMC-IMAG, Grenoble INP, Université Grenoble Alpes, CNRS, CHU Grenoble Alpes
    Xavier GARRIC, Polymers for Health and Biomaterials - IBMM - Univ Montpellier
    Benjamin NOTTELET, Polymers for Health and Biomaterials - IBMM - Univ Montpellier

    topicC-01 Adhesives and anti-adhesives
    person_pinMathilde GROSJEAN, Polymers for Health and Biomaterials - IBMM - Univ Montpellier
    P2 - Gene therapy - Exploring Microfluidics as a Neuro-platform Towards the Design of a Novel Targeted Dendritic VectorGene therapyAna P SPENCER, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica Universidade do Porto, Porto, Portugal; Faculdade de Engenharia, Universidade do Porto, Porto, Portugal
    Miguel XAVIER, International Iberian Nanotechnology Laboratory (INL), Braga, Portugal
    Sofia G GUIMARÃES, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica Universidade do Porto, Porto, Portugal
    Victoria LEIRO, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica Universidade do Porto, Porto, Portugal
    Ana P PÊGO, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica Universidade do Porto, Porto, Portugal; Instituto de Ciências Biomédicas Abel Salazar (ICBAS), Universidade do Porto, Porto, Portugal

    topicC-07 Gene therapy
    person_pinAna P SPENCER, i3S – Instituto de Investigação e Inovação em Saúde, Universidade do Porto, Porto, Portugal; INEB – Instituto de Engenharia Biomédica Universidade do Porto, Porto, Portugal; Faculdade de Engenharia, Universidade do Porto, Porto, Portugal
    P3 - Gene therapy - Tissue-Adhesive Glue as a Novel mRNA Delivery Carrier for Hepatocellular Carcinoma TreatmentGene therapyRatchapol JENJOB, Department of Biomedical Science, BK21 FOUR Program in Biomedical Science and Engineering, Inha University College of Medicine, Incheon 22212, South Korea
    Min-Kyoung KIM, Department of Biomedical Science, BK21 FOUR Program in Biomedical Science and Engineering, Inha University College of Medicine, Incheon 22212, South Korea
    Yixin JIANG, Department of Biomedical Science, BK21 FOUR Program in Biomedical Science and Engineering, Inha University College of Medicine, Incheon 22212, South Korea
    Phuong Hoa TRAN, Department of Biomedical Science, BK21 FOUR Program in Biomedical Science and Engineering, Inha University College of Medicine, Incheon 22212, South Korea
    Jin-myeong SEO, Department of Biomedical Science, BK21 FOUR Program in Biomedical Science and Engineering, Inha University College of Medicine, Incheon 22212, South Korea
    Hosun JANG, Department of Biomedical Science, BK21 FOUR Program in Biomedical Science and Engineering, Inha University College of Medicine, Incheon 22212, South Korea
    Su-Geun YANG, Department of Biomedical Science, BK21 FOUR Program in Biomedical Science and Engineering, Inha University College of Medicine, Incheon 22212, South Korea

    topicC-07 Gene therapy
    person_pinRatchapol JENJOB, Department of Biomedical Science, BK21 FOUR Program in Biomedical Science and Engineering, Inha University College of Medicine, Incheon 22212, South Korea
    P4 - Gene therapy - Deciphering the complexity of poly (beta amino ester) polyplexes: particle composition, stability and cellular interactionsGene therapyMaría NAVALÓN, IQS Ramon Llull
    Aurora DOLS, IBEC
    Santiago GRIJALVO, IQAC-CSIC
    Fornaguera CRISTINA , IQS (Ramon Llull)
    Salvador BORRÓS, IQS (Ramon Llull)

    topicC-07 Gene therapy
    person_pinFornaguera CRISTINA , IQS (Ramon Llull)
    P1 - Bacteria/material interactions - Engineered living hydrogel meshes for therapeutic applicationsBacteria/material interactionsMaría PUERTAS BARTOLOMÉ, INM-Leibniz Institute for New Materials
    Aranzazu DEL CAMPO, INM-Leibniz Institute for New Materials

    topicF-01 Bacteria/material interactions
    person_pinMaría PUERTAS BARTOLOMÉ, INM-Leibniz Institute for New Materials
    P3 - Bacteria/material interactions - Analysis Of The Disinfection Of Electronic Instruments In Clinical Use: The Case Of VR Headsets For Anesthesia And Pain ReliefBacteria/material interactionsCynthia CALLIGARO, Spartha Medical
    Jémil HACINI, Spartha Medical
    Philippe LAVALLE, INSERM UMRS1121, Spartha Medical
    Nihal Engin VRANA, Spartha Medical

    topicF-01 Bacteria/material interactions
    person_pinNihal Engin VRANA, Spartha Medical
    P4 - Bacteria/material interactions - Human mesenchymal stem cells offer an immune-privileged niche to C. acnes in case of implant-associated osteomyelitisBacteria/material interactionsMarie DUBUS, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Jennifer VARIN-SIMON, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Steve PAPA, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Sophie GANGLOFF, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Cédric MAUPRIVEZ, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Xavier OHL, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Fany REFFUVEILLE, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    Halima KERDJOUDJ, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France

    topicF-01 Bacteria/material interactions
    person_pinHalima KERDJOUDJ, Université de Reims Champagne Ardenne, EA 4691, Biomatériaux et Inflammation en Site Osseux (BIOS), Reims, France
    P5 - Bacteria/material interactions - Antibacterial properties of additively manufactured PVDF-graphene composites Bacteria/material interactionsAndrea SPANOU, Uppsala University, Graphmatech AB
    Supradeepa PANUAL, Uppsala University
    Mamoun TAHER, Graphmatech, Uppsala University
    Ken WELCH, Uppsala University
    Cecilia PERSSON, Uppsala University

    topicF-01 Bacteria/material interactions
    person_pinAndrea SPANOU, Uppsala University, Graphmatech AB
    P6 - Bacteria/material interactions - Antibacterial Activity and Biodegradation of Zn-Ag Alloys for Biomedical ApplicationsBacteria/material interactionsGarcía Mintegui CLAUDIA, Universitat Politècnica de Catalunya
    Dorrego GEMMA, Universitat Politècnica de Catalunya
    Buxadera Palomero JUDIT, Universitat Politècnica de Catalunya
    Cortina JOSÉ LUIS, Universitat Politècnica de Catalunya
    Pegueroles MARTA, Universitat Politècnica de Catalunya
    Victor CHAUSSE CALBET, Universitat Politècnica de Catalunya

    topicF-01 Bacteria/material interactions
    person_pinVictor CHAUSSE CALBET, Universitat Politècnica de Catalunya
    P1 - Virus-surface interactions - Rapid inactivation of SARS-CoV-2 by oxidized silicon nitride powdersVirus-surface interactionsIoannis KATSAROS, Division of Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Sweden
    Jiaxin LING, Department of Medical Biochemistry and Microbiology, Uppsala University, Sweden
    Göran AKUSJÄRVI, Department of Medical Biochemistry and Microbiology, Uppsala University, Sweden
    Åke LUNDKVIST, Department of Medical Biochemistry and Microbiology, Uppsala University, Sweden
    Cecilia PERSSON, Division of Biomedical Engineering, Department of Materials Science and Engineering, Uppsala University, Sweden
    Wei XIA, Division of Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Sweden
    Håkan ENGQVIST, Division of Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Sweden

    topicF-03 Virus-surface interactions
    person_pinIoannis KATSAROS, Division of Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Sweden
    P1 - Artificial intelligence - An attempt to develop new Ti-based BMGs for dental implantology by means of Machine Learning and experimental assessment.Artificial intelligenceYohan DOUEST, Anthogyr SAS, INSA-Lyon

    topicH-01 Artificial intelligence/machine learning and deep learning
    person_pinYohan DOUEST, Anthogyr SAS, INSA-Lyon
    P2 - Artificial intelligence - Introducing Mixed Reality within the confines of the operating roomArtificial intelligenceStan LARROQUE, Lynx Medical, Paris, France
    Titouan NGUYEN HUYNH, CentraleSupélec, Université Paris-Saclay; INSERM U1148, Université Paris Cité, X Bichat hospital, Paris, France
    Marc PIUZZI, Lynx Medical, Paris, France
    Patrick NATAF, INSERM U1148, Université Paris Cité, X Bichat hospital; Interventional Cardiology Department, APHP, X Bichat hospital, Université Paris Cité, Paris, France

    topic
    person_pinTitouan NGUYEN HUYNH, CentraleSupélec, Université Paris-Saclay; INSERM U1148, Université Paris Cité, X Bichat hospital, Paris, France
    P1 - High-throughput screening - Evaluating Acoustic Droplet Transfer Technology for High Throughput Biomaterial Library FabricationHigh-throughput screeningCharles WINTER, Imperial College London
    Marko STORCH, Imperial College London
    Tianhong DAI, Imperial College London
    Anil BHARATH, Imperial College London
    Adam CELIZ, Imperial College London

    topicH-03 High-throughput screening
    person_pinCharles WINTER, Imperial College London
    P1 - Legal and regulatory aspects - Impact of the new European regulation (EU) 2017/745 on medical devices on hospital pharmacies activity: Example on pharmaceutical supply function within a French university hospital centerLegal and regulatory aspectsHalil SAYIN, Univ Lyon, Université Claude Bernard Lyon 1, INSA Lyon, CNRS, MATEIS, UMR5510, 69008 Lyon, France
    Claire GAILLARD, Univ Lyon, Université Claude Bernard Lyon 1, INSA Lyon, CNRS, MATEIS, UMR5510, 69008 Lyon, France
    Agnès HENRY, Service pharmaceutique, groupement hospitalier Nord, hospices civils de Lyon, 69004 Lyon, France
    Delphine CABELGUENNE, Service pharmaceutique, hospices civils de Lyon, hôpital Lyon Sud, 69495 Pierre-Bénite cedex, France
    Xavier ARMOIRY, Univ Lyon, Université Claude Bernard Lyon 1, INSA Lyon, CNRS, MATEIS, UMR5510, 69008 Lyon, France

    topicK Legal and regulatory aspects
    person_pinHalil SAYIN, Univ Lyon, Université Claude Bernard Lyon 1, INSA Lyon, CNRS, MATEIS, UMR5510, 69008 Lyon, France
    P2 - Legal and regulatory aspects - Consequence of the COVID-19 pandemic on the production of medical devices produced with 3D printers in French hospitalsLegal and regulatory aspectsConstant BEROULLE, Univ Lyon, Université Claude Bernard Lyon 1, INSA Lyon, CNRS, MATEIS, UMR5510, 69008 Lyon, France
    Xavier ARMOIRY, Univ Lyon, Université Claude Bernard Lyon 1, INSA Lyon, CNRS, MATEIS, UMR5510, 69008 Lyon, France
    Claire GAILLARD, Univ Lyon, Université Claude Bernard Lyon 1, INSA Lyon, CNRS, MATEIS, UMR5510, 69008 Lyon, France

    topicK Legal and regulatory aspects
    person_pinConstant BEROULLE, Univ Lyon, Université Claude Bernard Lyon 1, INSA Lyon, CNRS, MATEIS, UMR5510, 69008 Lyon, France
    P3 - Legal and regulatory aspects - EU and US regulatory challenges to classify borderline bone allografts and devices containing animal tissue derivativesLegal and regulatory aspectsThomas MIRAMOND, NAMSA
    Adrian KEENE, NAMSA

    topicK Legal and regulatory aspects
    person_pinThomas MIRAMOND, NAMSA
    P4 - Legal and regulatory aspects - Practical considerations in selecting appropriate controls in developing new in vitro test systems for cardiotoxicity testingLegal and regulatory aspectsAlessandra RONCAGLIONI, Istituto di Ricerche Farmacologiche Mario Negri IRCCS, Milan, Italy
    Edoardo Luca VIGANÒ, Istituto di Ricerche Farmacologiche Mario Negri IRCCS, Milan, Italy
    Salvador FERNÁNDEZ-ARROYO, Centre for Omic Sciences, Eurecat, Centre Tecnològic de Catalunya, Reus, Spain
    Federico VOZZI, Institute of Clinical Physiology IFC-CNR, National Research Council, Pisa, Italy
    Nunzia LINZALONE, Institute of Clinical Physiology IFC-CNR, National Research Council, Pisa, Italy
    Birgit MERTENS, Department of Chemical and Physical Health Risks, Sciensano, Brussels, Belgium
    Sivakumar MURUGADOSS, Department of Chemical and Physical Health Risks, Sciensano, Brussels, Belgium
    Ronette GEHRING, Institute of Risk Assessment Sciences, Utrecht University, The Netherlands
    Tom ROOS, Institute of Risk Assessment Sciences, Utrecht University, The Netherlands
    Martin PAPARELLA, Medical University Innsbruck, Institute for Medical Biochemistry, Austria

    topicK Legal and regulatory aspects
    person_pinAlessandra RONCAGLIONI, Istituto di Ricerche Farmacologiche Mario Negri IRCCS, Milan, Italy